I just purchased an Airport Time Capsule.

I just purchased an Airport TIme Capsule
I am reading how to add my printer to it and it says to Choose "Add WPS Printer" from the base station menu but there is not such an option? Has anyone else figured out how to hook up the printer?

What version OS are you running? What version of airport utility?
There is a WPS option in the top menu area.. not in the utility interactive area.. even the old version utility had this option.. but it was named differently.
It will be greyed out unless you actually select the TC in the utility.

Similar Messages

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket.

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

I recently purchased a airport time capsule. My current router offer duel band. Does the Airport offer duel band

I recently purchased a airport time capsule. My current router offer duel band. Does the Airport offer duel band

The Time Capsule automatically broadcasts a simultaneous dual band wireless signal. Wireless devices will connect to the band with the best quality signal based on their capabilities and distance in relation to the Time Capsule.

I just got an Airport time capsule 2TB. When I start back-up it backs up about 17kb and then stops but says Calculating time remaining.... Anyone got an idea of what's going on?

Just got an Airport Time capsule,
I set it up as a network extension and began back-up.
It estimated 4 hours so I left it run. After 10 hours I noticed it had stopped backing up but had not back up to the time capsule. So I tried again and it just got stuck on Calculating Time Remaining. I reset the capsule a few times and have set it up as instructed. The same has happened each time.
It backs up about 17kb of info and then freezes with Calculating time remaining below the progress bar.
Anyone any ideas?
Thanks

Network extension sounds onimous.. is this wireless extension.. it is super bad for large TM backups..
Always do the first backup direct by ethernet to the TC even if it has to be in full isolation.
Stalling at 17kb might be just the wireless having issues. Or it can be a corruption in a file.
Pondini is our source of all things Time Machine.. and trouble shooting it.
http://pondini.org/TM/Troubleshooting.html
A1.. install the widget so you have access to the TM logs.. what the heck it is doing.
A4. if you upgrade installed OS.. do a reset of TM and start over.
A5 verify the disk.
C9 watch out for network names that are over long and over complex.. especially with Mavericks. It is hopeless.
I do recommend using a USB connected drive.. to do a first backup it is often the easy way.
Much faster and more reliable than over network.

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

I just purchased a 3tb Time Capsule and having trouble getting my Brother networked laser printer to work.

Hello,
I tried several different routers, but could never get my new Seagate 4tb external hardrive to connect to use with Time Machine. I finally gave up and purchased a new Time Capsule today. It's a work of art, and working well as a router and harddrive. That said, I cannot get my Brother Laser Printer (HL-5370DW) to print.
It's a networked printer and my computer finds it, but it will not print anything.
Does anyone have any ideas what I can do to get it working?

Mavericks often needs new drivers.. did you check the brother website for new drivers for 10.9.
Delete all the previous references to this printer.. and any other printer if they no exist.
Try and load again the new printer according to the Mavericks instructions.. this is actually nothing to do with the TC.. since the printer is network and using wireless or ethernet (not USB!!). Then the TC it is simply another client.
http://support.apple.com/kb/PH14143

HT1178 I just bought an Airport Time Capsule. I already have a AirportExtreme for my wireless network for my home. Which would be better; connect the time capsule up to the extreme or use it as the primary base station?

Is it better to connect my Time Capsule up to my existing wireless network or use the Airport Time Capsule as the base unit and start over again by creating a new network?

There is no end of answers to this..
But if you want AC wireless.. assuming you bought a new TC.. and the Extreme is the older N model.. then simply make sure the TC is as close as possible to where wireless AC client will be used.. and connect it back to the main router whichever that is, by ethernet.
If both are AC then it will make no difference.
As long as you can connect them both by ethernet and not use wireless extend.. it won't make much difference.
The worst case is where you use wireless extend and expect high speed but totally lose it because of your bridge link.. if that is the case you wasted your money and you can return the TC and buy a hard disk and plug it into the AE.

Just bought a airport time capsule because my mac book pro start up disk is full. How can I put stuff onto the airport now from the MacBook Pro to free up some space?

http://www.prking.com.au/Products/StairLifts/StannahStairliftsCurved/Description Features.aspx

Yes, look in your Finder's sidebar under Shared, you should see the TC there. Connect to it using whatever password you set up when you first configured the TC, and then you can move files into the shared volume.
Don't forget that only one copy of a file is not a backup, so ideally you would have a second copy of your files somewhere else.
Matt

How to connect airport time capsule through wireless internet

Just purchased an Airport Time Capsule but having trouble to connect it through my Macbook Air using wireless. Could you please help? many thanks

Make sure the MBA has ipv6 set to link-local only for wireless.
I strongly recommend using short names, no spaces and pure alphanumeric.
eg TCgen5 and TCwifi
In fact if you keep having wireless issues.. with the MBA in the same room as the TC, change the wireless name to TC24ghz and TC5ghz so you have different names for both bands and see if that doesn't help.. try to connect to this band and then the other.
Use WPA2 personal security.. password 8-20 characters mixed case and numbers.. no non-alphanumerics.
Do not hide the wireless.. that is against the code and simply leads to issues.
If you still have issues.. post back.. does the MBA work ok on other routers or wireless access points??

AirPort Time Capsule + AT&T Unite

I live out in the boondocks. Our only access to broadband is through either satelite or through the mobile phone company. We chose AT&T because of the fast LTE speed in our area. I have the AT&T Unite, and so far it has been my main router, with the Airport Express as a slave. I just purchased an Airport Time Capsule.
Is it possible to set up a network where the Time Capsule is the primary router, and it uses the Unite for internet access?
It looks like you can connect to the Unite via USB. Time Capsule cannot use USB for internet access. What about a USB to Ethernet converter, would that work?
Is there some wireless method to allow this? I'm not sure how to do it with WPS.
I really don't want the Unite to be the main router as it's pretty slow as far as a local network goes.
Thanks,
Keith

It is IMHO easier to do this in two parts..
1. Do the express.. it is Join a wireless network. Since it joins the wireless it will use the same name. That for us is irrelevant.. as we want ethernet from it.
Bridge (at least here) simply means one network type to another.. wireless is transparently converted to ethernet.
Make sure the computer works fine by ethernet. No wireless turned on.. once you finish the setup.
All going good.. tick.. your Express is setup. (Turn wireless back on .. on the computer).
2. Plug the ethernet from the Express into the WAN port of the TC.
Back on the computer.. run the airport utility again.. wireless back on
Run through the airport utility.. Create a network on the TC. (not extend).
Finish the airport utility.. then click on the TC icon and go to the edit .. go to the network tab and make sure you are bridged.
This bridge (which is confusing) means the router part of the TC is bypassed..
The situation is like this.
Unite is modem-router---wireless connect ---Express---Ethernet-- TC (bridge)--- wireless or ethernet to clients.
All dhcp is done by Unite. So you have 10 client limit.
If you wanted to have more than 10clients run the TC in router.. (DHCP and NAT) in the Router Mode.
Ignore the double NAT error message.
Create a different wireless network name to the Unite.. as it will be much better to force connection to the TC.

Airport Time capsule not found on mac when using AirPort Utility

I just purchased an AirPort Time Capsule to back up my files from my Mac. I have been able to set up the wireless portion, but when trying to access the backup portion through TimeMachine I cannot select my base. I am able to see it on my iPhone, but not on Mac. I have updated everything. Is this a known problem with the transition to Yosemite? Any suggestions?

Dead spot on.. Yosemite is pain plus..
I recommend you start over in your TC setup..
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.

How can I make my new AirPort Time Capsule with VOIP?

I purchased an AirPort Time Capsule because of the modem capability. The modem we have from the phone company isn't very good.
Now I have a little problem. I forgot we have our phone over internet and I cannot figure out how to set it all up.
Any ideas for my latest problem? I'd run back to the store/genius bar, but it's a ferry ride away and I'm not sure it would do any good to go back because all my phone "stuff" (cords, etc) wall jacks, is all here.
Current set up is this:
Modem box has ethernet (yellow) cable going from it to imac. It also has blue cable going from it to ATA Router (smaller black box). Each box (white larger "modem" box, and black smaller ATA Router) have a phone cord going from wall (2 separate jacks) to the box. And obviously each has it's own power cord.
I tried moving all plugs from white modem box to AP TC, but there really isn't a phone jack on back of APTC. It clicked in place in one of the <--> ports, but I'm getting a flashing amber light on the front, and no internet connection.
Any ideas for my latest issue?? I know so much more about computers than I ever wanted to know, but it obviously isn't enough.
Thanks!

I purchased an AirPort Time Capsule because of the modem capability.
There is no modem in the airport routers.. they are all plain ethernet routers.
It sounds like you have adsl modem.. and I would just leave it alone.
But if you want to play and your ISP supports PPPOE and the modem allows bridging or bridge mode.. then you can bridge the modem and use TC to establish the link to the ISP.. on the internet tab use PPPOE and put in your ISP username and password.
You can then plug the ATA into one of the LAN ports of the TC.
Overall this is probably not a great idea.
Exactly what modem are you talking about .. make and model from the base please?? Who is your ISP?
What model is the ATA? Actual model numbers from it please.
Generally you will plug the TC into the modem and use simple bridge mode.
Even though the airport wizard might attempt to take over as main router.. please do the setup manually and choose bridge mode.
See Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

AirPort Time Capsule Model A1470 Shuts Down

Hello!
I purchased an AirPort Time Capsule last week for more than $300 to replace Model A1409, which suddenly shut down and never came on again.
The new AirPort Time Capsule (Model A1470) shuts down at least 4 times a day every day. I unplug it and plug it back in and it reconnects. This happens at random times when I'm using the computer and when I'm not. Sometimes it happens when we're watching a movie on the TV and after I get it up and running again I need to enter all of the password infromation on the television again.
This is a 2TB Model A1470.
Having reliable wifi is a must because I am a work-at-home online educator and have 40-hours per week of office hours with continuous IM access to my students.
Should I return it or is there something I missed?

When you say shuts down.. what does that actually mean??
The new AirPort Time Capsule (Model A1470) shuts down at least 4 times a day every day.
Does the LED in the TC turn off??
Does it blink amber??
Can you connect a computer to it by ethernet and still get internet??
The requirement to re-enter info like password on the TV seems rather strange.
If the TC just stays Green and the effects are in the network and not apparently on the TC itself.. please try a full factory reset of the TC.
Please rename it.. Call the base station TCgen5.
Please set a different wireless name to both bands.. TC24ghz and TC5ghz.
Even set fixed channel for 2.4ghz and you can also try 5ghz although I doubt it will accept the value.
Make sure you use WPA2 Personal security with a suitable password, 8-20 characters pure alphanumeric.
If you get no improvement then yes you should return it as it seems to be faulty.

AirPort Time Capsule disappears from network

I purchased an AirPort Time Capsule (2T) and installed it to our home network. We have Verizon Fios, are connected to the internet via the Verizon router, etc. I installed the Time Capsule per the instructions and our 2 MacBook airs found the Time Capsule. So did our IPads. I also connected our 2 IPhones to the newly created Wi-Fi network.
My main,home PC did find the Time Capsule, which is why I originally purchased the unit - to provide Wi-Fi back-up for our files, music, pictures, etc. Once found, I also changed my PC Wi-Fi settings to use my new network to connect to the internet.
I also copied some of my files to the 'data' section of the Time Capsule - the pictures took 8 hours to copy. Afetr completing this, I put my PC into hibernate and went to bed.
The next morning, my PC did not find or connect to the Time Capsule, but it is using the Time Capsule Wi-Fi for internet connections.
The Time Capsule appeared on it's own after about 15 minutes, but will not appear now and I do not know how to find it to re-connect and be found by my main HP PC. I have rebotted my PC several times and this does not work. I have also tried changing back to my old Wi-Fi connection and then re-connecting to the new network - also does not find the Time Capsule.
Does anyone know what I have to do so that the AirPort Time Capsule shows and is connected all of the time to the network, as seen by my main PC?
My MacBook airs seem to stay connected.
Thanks,
Jim

No, I did not know this and am installing it as I type.
I did notice that when I first re-boot my PC from the hibernate mode, the Time Capsule is not there in my network, but shows up in about 10 to 20 minutes (estimate). It has shown up each and every time I have used the PC. Awfully strange - when I commented on this forum originally, it did not show up for an hour or so; thus, I asked for help. Now - it shows up each time even if late or takes some time to discover.
Thus, I believe there might be some sort of 'search and find' function, that adds the wi-fi capable Time Capsule once found.
As long as it keeps showing up, as it is now, even if late, I will live with it.
I have been out of hibernate mode for about 10 minutes now - I just looked and Time Capsule is there.
Thanks for the suggestion.
Jim

I just purchased an Airport Time Capsule.

Similar Messages

Maybe you are looking for