I keep trying to build a DVD and it has a hardware error.

Hello,
   I have build a lot of DVD projects in Encore and they've come out fine. But I often get a window that says Encore has a hardware error.
       The window that comes up says 'Encore was unable to complete the operation because of a hardware error (Sense Code 37303). Please contact the hardware manufacturer for more infomation.'
      When I erase my Mac then reintsall all the software it will build the project; that fixes the problem, but it takes too long (about 5 hours). Is there a quicker fix?
Thank you for your replies.

Thank you so much for your reply Shuchi.
I fixed it after reading this disscussion.
http://forums.adobe.com/message/1808812#1808812
John T. Smith's answer #10
I just followed the 1st suggestion-
-Use the SLOWEST possible burn option your burner will allow in Encore, from 8x to 1x.
Have a good week :y

Similar Messages

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

you must also use a browser that allows cookies. try a different browser or download from adobe.com
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am trying to burn a dvd and it will not allow me to do this because it states that i do not have enough space for encoding disk. how do i free up space and from where?

I am trying to burn a dvd and it will not allow me to do this because it states I do not have enough space for encoding. how do i free up space and from where?

iDVD can only use your startup hard disk for the "scratch space" it needs for calculations during the encoding process. 25 GB is a good average requirement, but a large project (3 or 4 hours of content) might require more.
To free up space, you will have to move items to an external hard drive and/or delete items you no longer want.
Please note that iDVD can't use and external hard drive for this "scratch space".

HT1937 I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

Hi Broken Smoke,
Welcome to Apple Support Communities.
You can change the iTunes Store information associated with your Apple ID, and select None as your payment option. See the steps in this article for help:
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Changing your account information using an iOS device:
Tap Settings on the Home screen.
Tap iTunes & App Stores.
Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
Tap View Apple ID.
Enter your Apple ID password.
To update your name, billing address, or payment information, follow these instructions:
In the Edit section, tap Payment Information.
Update the information that you want to change.
Tap the Done button when finished.
Have a great day,
Jeremy

I keep trying to reset my password and it's telling me to send the email to me but I never get it. Why?

I keep trying to reset my password and it's telling me to send the email to me but I never get it. Why?

Welcome to the Apple Support Communities
Connect the device to your computer and iTunes will ask you to update to the latest version

SO I KEEP TRYING TO FINALIZE IMOVIE PROJECT AND ... NOT FINALIZE BECAUSE NOT ENOUGH ROOM IN HEAP ZONE?

SO I KEEP TRYING TO FINALIZE IMOVIE PROJECT AND... NOT FINALIZE BECAUSE NOT ENOUGH ROOM IN HEAP ZONE?

The experts at a store told me that this usually is a problem of not having enough memory available for the system to finalize the project. I moved some movies to a hard drive, but still haven't been able to solve the problem.

HT3606 i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

i keep trying to update the software and it gets stuck on configuration, so i can i sped up the process?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

HT5834 I keep trying to activate my keychain and sent to apple support all my passwords are correct as well as the sms code i recieved??

I keep trying to activate my keychain and sent to apple support all my passwords are correct as well as the sms code i recieved??

Hi 2 stroke,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having issues setting up or using iCloud Keychain, you may find the information and troubleshooting steps outlined in the following article helpful:
Get help using iCloud Keychain - Apple Support
Regards,
- Brenden

Keep trying to send a message and it wont go through i keep getting a message that says network problems cause code :3 what does that mean

keep trying to send a message and it wont go through I keep getting a message pop up that says network problems cause code :3 what does this mean

SMS Error: Cause Code 3, Error Code 2

I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That's all we know. in English

I keep trying to load firefox 6 and keep getting this error - The requested URL /cse?cx=partner-pub-3540673482024757:xbhdw8hkfz5&ie=ISO-8859-1&q=&sa=Search was not found on this server. That’s all we know. in English

Bookmark and use this;
Download the '''[https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''' {web link}
This add-on is very simple: on installation, it backs up
and then resets your search preferences and home page
to their default values, and then uninstalls itself. This
affects the search bar, URL bar searches, and the home page.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

I keep trying to get onto appstore and its says my apple ID is disabled. Why is this happening and how can i fix it?

keep trying to get onto appstore and its says my apple ID is disabled. Why is this happening and how can i fix it?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

My iMac keeps telling me that a DVD that clearly has content on it, is blank.

Hello: My iMac keeps telling me that a DVD that clearly has content on it, is blank. I thought, at first, that maybe the disc was blank. But then I inserted a DVD movie that I created using iMovie and it told me the same thing. No matter what DVD I inserted, I got the same response..Does this mean that the Optical Drive is dead? Do I need to purchase a "Super Drive"? Any and all assistance is greatly appreciated...Thanks

There are two schools of thought on external optical drives.
You can go with cheap drives (anything under $50) and know going in that you may have to replace the drive in a year or two if you use the drive regularity.
The other thought is to purchase more expensive drives that will last longer than two or three years that are faster and are bulit to be more durable and rugged.
I am in this camp.
Here is one I would recommend.
http://eshop.macsales.com/item/OWC/MRF82SD24S/
This one has no burning software included. If you have burning software already, this shouldn't be an issue.
Here's the one I use, but the used price for this is too high, IMO
I only paid $179 for this new, locally.
http://www.amazon.com/LaCie-Blu-Ray-FireWire-Drive-301906U/dp/B003D4OXCQ/ref=sr_ 1_14?ie=UTF8&qid=1378224570&sr=8-14&keywords=LaCie+optical+drives
IF you want to add additonal Blu-ray Capabilites, there are many other drives listed here in different price ranges.
http://eshop.macsales.com/shop/firewire/optical-drives/
I prefer the OWC Mercury Pro line of drives, prefer tray loading drives that have multiple connections (in case one connection scheme goes bad) and drives that have their own power supplies and do not rely on bus power from the computer, itself. These drives come in a very durable and rugged enclosure.

HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?

When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

I tried to reset my iPad, and it has not got past the apple start up page

I tried to reset my iPad, and it has not got past the apple start up in several hours. I've tried connecting it to itunes but its not detected.
What can I do?

I assume that you mean that all you see on the screen is the Apple logo and it hasn't changed for hours from that screen. You may need to restore using recovery mode, since your iPad is not being recognized in iTunes.
Instructions here.
http://support.apple.com/kb/ht4097
But - did you try this first?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages

Hi i have just tried to update i tunes and it has crashed and uninstalled i tunes off my laptop. I have tried to install i tunes again but it wont and comes up with error messages

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Message was edited by: turingtest2

I keep trying to build a DVD and it has a hardware error.

Similar Messages

Maybe you are looking for