I like to play cards on Yahoo. I can get into the program, but the room page, applet won't load.

I can get into Yahoo, and the 'gin' site, but when I try to go to a room to play, the page won't load. It's just blank. I've tried all the things, like emptying cache, and it doesn't help.

I suspect the software was originally designed for PPC based Macs and is simply not designed to run on 10.6.7. I would recommend contacting the manufacturer and asking the correct way to uninstall they're application.
After uninstalling I would run Repair Disk Permissions in Disk Utility and if necessary do a SMC reset using the following instructions:
SMC RESET
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
PRAM RESET
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Roger

Similar Messages

  • Address Book: why do some Cards in a Group not get into the email?

    I have a group with about 55 email addresses, each on a card in Address Book.  When I use the list in Apple's Mail program, two cards do not get included.
    This has happened many times, and I keep verifying the name is in the group.

    Well, before I read your response . . . I started looking more seriously at my Address Book cards.  Should have done this first! The problems ones had email addresses in the work phone field. 
    Unfortunately, when you look at the Card, both fields are labeled 'work.'  If you make a mistake filling it out, you can't see the error unless you Edit the card.
    But thanks for trying to help me!  As a retired usability engineer, I hope someone will look at the labeling on the Cards!

  • IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

    I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
    Thanks for any advice you can offer!

    I have tried all the above and nothing seems to work. Any other suggestions?

  • I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated.  And can't used the app card number.  Any advice???

    I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated.  And can't used the app card number.  Any advice???

    I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
    Apple is becoming more like Microsoft every day.

  • Okay so my IPod touch 4 won't play music through any headphone I put into the port. I've tried it with 4-5 different headphones but it still won't work.  How can I fix this?

    Okay so my IPod touch 4 won't play music through any headphone I put into the port. I've tried it with 4-5 different headphones but it still won't work.  How can I fix this? This isn't the first time something like this has happened but it has never stayed this way for such a long time. If I have to send it in for repairs I will but I'm not sure if its under warranty

    To check for warranty coverage:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for theother 4Gs. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 9
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • How can I get my new ipad 4 to read my compact flash cards? If not can I download the images directly from my camera?

    how can I get my new ipad 4 to read my compact flash cards? If not, can I download the images directly from my camera?

    Tom, thanks for your quick reply. I'm a commerical photographer using Canon 5D mk2's mostly and have in the past just downloaded images to a mac book for backup. I really liked the compact size of the Ipad and just got the retina model with the camera connection kit and seem to be hearing that CF readers can't be used with it b/c they draw too much power. Seems like I remember reading I could use a cord that might have come with my cameras to download directly to the Ipad. I haven't tried it yet as I can't find the connection but then you just said it can't be done? 
       I'm COMPLETLY lost as to your "first pluging in a flash drive to my computer, advice. Do you mean Ipad when you say computer?  "then put your movie/photo files into the folder." HOW????????
         Then plug it into the Ipad??????     TOTALLY lost.
    Also your saying just "do a google search for a reader doesn't work b/c NONE are able to work with the newer Ipads b/c they use TOO much power or so everyone says everyone that have tried.
       Hope you can help a little more b/c I'm really getting frustrated with all the conflicting advice!
    Thanks, Dennis  [email protected]

  • I have store credit on iTunes (on my pc) but it doesn't use it when I click 'buy' on an album, it just wants me to select a credit card type.  How can I buy the album?

    I have store credit on iTunes (on my pc) but it doesn't use it when I click 'buy' on an album, it just wants me to select a credit card type.  How can I buy the album?

    This Apple document discusses the various payment options. Payment & Pricing - Apple Store (U.S.)
    The Apple Store gift card method is available in the US only.
    OT

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in

    Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page.  Is there any reason for this?  I've been updating the app everytime and now it's not letting me in.  Pls advise. Tq

    Reset the device, restart the device, try downloading any other app.
    All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

  • What if a person no longer has access to the house in which the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless.  I am caught going round in this loop - there's that one button, no other option.  Thanks in advance. 

  • IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

    I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
    I can get into safe mode. But no regular startup.
    I tried disabling bluetooth, thinking that might be related. It didn't help.
    I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
    But I still get hung on the blue screen when trying a normal startup.
    All help would be appreciated.

    Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
    http://support.apple.com/kb/HT1436
    http://support.apple.com/kb/HT1939
    http://support.apple.com/kb/HT1767
    http://support.apple.com/kb/HT1379
    I hope this solves your problem.

  • I downloaded the new version of firefox and now when I try to log on nothing happens its like it doesn't reconize the mouse click. I can get on the internet with explorer but no longer with firefox??

    firefox never opens. its what I always would get on the internet with now the symble is there but its dead. i downloaded the latest version and then everything changed, when I logged off I could not get back on to the internet. I can get on the internet using enternet explorer but not mozilla firefox
    I can't answer the first question below because it NEVER open anymore

    I have the shortcuts on my browser to the sites that I go to frequently. It's when I press those buttons (which have always worked before and I checked their URLs) it takes me to the Yahoo Page not Found page. But then when I click the shortcut button again, it usually works.

  • My husband was helping our daughter set up an apple id.  She entered her e-mail address incorrectly, but didn't realize it until AFTER they had entered a credit card number.  How can we cancel the incorrect e-mail address account?

    My husband was helping our daughter set up an apple id.  She entered her e-mail address incorrectly, but didnt realize it until AFTER they had entered a credit card number.  How can we cancel the account with the wrong e-mail address?

    iMac model?
    Mac OS version?
    Both can be viewed fby doing "About this Mac" from the Apple menu at the left end of the menubar. The OS version will be pretty obvious; posting what the window says about your processor will help us figure out what model.
    I ask becasue about 60 percent of the posts here are about newer models than the pre-2006 iMacs this forum serves.
    Not your fault if you found the wrong forum--Apple's labeling is as clear as mud!

Maybe you are looking for