I'm connected to Wi-Fi, and Safari works fine, but Facebook / Youtube aren't working. I'm using the latest versions of each, and using the latest iPod version - what's wrong?
Pretty much the title - Wi-Fi seems to be fine, I'm using my laptop at the moment and internet's working fine. Safari works on my iPod touch also, but not Facebook or Youtube. These are at their latest versions, and the iPod is at its latest version too...anyone had the same problem / know what to do?
Are Restrictions turned on? Go to Settings > General > Restrictions. If it says "On", enter your Restrictions password and see if Facebook and YouTube are turned off.
Similar Messages
-
My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.
Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry -
My Mac Mini (Mid 2011) doesn't connect to Time Capsule in 5GHz Network. This WiFi Network don't appear in the WiFi list. What's Wrong?
Oh yes, & 5 GHz doesn't do walls very well at all.
GHz and Network Range
The higher the frequency of a wireless signal, the shorter its range. Thus, 2.4 GHz networks cover a substantially larger range than 5 GHz wireless networks. In particular, the higher frequency wireless signals of 5 GHz networks do not penetrate solid objects nearly as well as do 2.4 GHz signals, limiting their reach inside homes.
http://compnetworking.about.com/od/wirelessfaqs/f/5ghz-gear.htm -
my ipod nano 5th gen is still making the clicking noise but won't play music and the screen is black what's wrong?!
Downloading past purchases from the App Store, iBookstore, and iTunes Storehttp://support.apple.com/kb/HT2519
Message was edited by: michael08081 -
Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?
That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY! -
My speakers when i play music go loud then quiet and i dont know why? what is wrong?
my speakers when i play music go loud then quiet and i dont know why? what is wrong?
Same with me nothing has changed. However what reduces it for me is if you change your battery settings to high performance. But it still does it, you will just find it will do it less.
-
My iPod will not charge at all it will when it's off it will power on and charge to a certain pint then will stop and no longer charge what is its problem I've tried 3 cords and three different outlets and also in my computer! What is wrong with it?it won't charge when it's powered on only when it s off then it turns on and stops charging?? What's wrong with it ad how much is a Genius Bar appt at apple stores??
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am getting the error "We're sorry we cannot complete your request on the iTunes store at this time. Please try again later." on both my iPhone and iTunes on my computer. What is wrong with iTunes? Is the server down or what? I need to download some things and update some apps...
I've been getting the same message for like an hour now. Since everything was working fine a few hours ago, and nothing changed on my end before it stopped working, I'm guessing it's something on Apple's end. They probably already know about it by now, and are hopefully working on fixing it, so there's probably not much we can do but wait for them to fix it.
-
I cannot get the subtitles to work no matter how many times I set it up and I am doing it correctly, what is wrong?
if the material don't state there is subtitles in your language it don't include it
and if will only show subtitles if the language you choose in the atv settings so if you have it set to french
and the material only have subtitles in English and not french they will not display -
A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?
If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool. -
Help - Mail is not sending or receiving any e-mails . Connectivity Doctor is showing green lights.Have rebooted but same issue - just a circle continually going around the Sent mailbox and 2 e-mails waiting in Outbox.
Is your web browser working normally?
-
Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.
I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support? -
i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.
Maybe you are looking for
-
Pages 4.3 was a useful technical word processing program; Pages 5 is not. Does anone know is Apple intends to improve Pages 5 at least to the level of Pages 4.3?
-
In my libray of photos I have 1128 pics, but when I try to syncronize my iPod, only can I copy the half of them, How can I resolve this situation
-
Dear Guru's, I am running MTO scenario for a plant. Maintained strategy group for finished product as 20 & for raw materials as 70. The indiv / collective requirement for FG is 2 & for RM is 1. As per standards, the stock for raw materials should
-
My wife and I downloaded the trial version of LR 4 to our computers. She loves it so much that I bought her a boxed copy to arrive on her birthday (I will probably buy a boxed version myself). My question is: when the boxed version arrives, will we h
-
Documetations about the complex interface for business partner
Hi Folks, did anyone knows, were I can find some documentations about "how to use the complex interface for business partner"? Kind regards Thomas