I'm having trouble with popups on my mac book pro constantly along with words on every page that have turned into links. how do i fix this???

i have pop ups constantly from mackeeper and many other websites. i also have noticed that some words on all websites have turned into links... how do i fix the problem??

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • Im having trouble launching my itunes library, Everytime i try to launch it an error message appears and says "New Itunes Libraray" How do i fix this? I dont want to lose all my music

    Anybody else having a problem saying "new itunes library"? this happened out of the blue, and i have tried numerous things, but i can not get into my itunes at all.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

    Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

    First, make sure that all your devices are using the same Apple ID in iMessages including your Mac.  Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up.  Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread.  It should work after performing those steps.  Good luck!

  • On the new ios 7 i am having trouble getting notifications, if i get kik it dosent show me i get a notification unless i open the app, how do i fix it?

    On the new ios 7 i am having trouble getting notifications, if i get kik it dosent show me i get a notification unless i open the app, how do i fix it?

    Hi Baseballlifea5,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Check to see if the developer has an iOS 7 update for their app first.
    The IPad Mini User Guide shows how to adjust the notifications setting for each app on page 29:
    manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    Cheers,
    - Judy

  • I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

    I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

    iOS: Not responding or does not turn on - Apple Support
    try this but maybe terminal if no result

  • HT5137 I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

    I made a purchase with my debit card on The Simpson Tapped out game, And now my game won't open. It just kicks me out every time I click on it. How do I fix this problem with out deleting my app?

    Personally, I would never use a debit card online, for security reasons.  If your card gets hacked its your money that is stolen.  At least with a credit card it is the card providers money that is stolen.
    Anyway,  I would delete the app and re-install.  If you paid for the app in the first place you will be able to re-install free of charge.  Also, the app should allow the in-app purchase to happen again as it should recognise that you have already purchased it previously.
    Finally, it might be that the 3G doesnt have as much ram as more recent models of iphone and you may have applications running in the background that are preventing the app to function with the in-app purchase unless you shut down any apps eating all you memory that are running in the background.  Shut-down these apps (and the simpson tap out app) by exiting to your home screen and double-tapping the home button to show what apps are running in the background.  press and hold any of the open apps until it starts shaking.  close all the apps down.  exit then re-launch the app.
    good luck.

  • Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion

    Im not able to use facetime at all. Do some countries have restrictions. Can anyone help me out ? I use a Mac Book pro retina display with OSx Mountain lion.

    FaceTime for Mac: Troubleshooting FaceTime

  • Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

    Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

    Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how.  It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !  
    Thank you !!

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Start up in Safe Mode
        http://support.apple.com/kb/PH11212
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    5. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    6. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    If this does not help, you have to buy an external HD and move your movies photos.etc to
    the external HD.

  • I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run, but it won't open. Is my configutation too slow?

    I have downloades Logic Pro 9 onto my older modfel Mac Book Pro 1,1 with OS 10.6.8 and 2 GB RAM, according to the rquirements for Logic 9. the program should run on OS 10.6.8. with 2 GB RAM, 4 GB better, but it won't open. Is my configutation too slow?

    Looks as if you're just at the minimum specs - http://www.apple.com/logicpro/specs/. Says 2GB minimum, 4GB recommended. And 2GB of RAM is all the RAM the 1,1 can handle. If I were you I would call Apple's App Store service center - you have the minimum requirements, as I read it, but perhaps you need a faster processor?
    I had a 1,1 but sold it when I bought my late 2011 in March of this year - maybe it's time to look at a new machine?
    Clinton

  • I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    I can't trasfer music from my library in itunes to my iphone 3GS. A black ring with a line through it comes up when i try to move music onto my iphone from itunes. How can I fix this so that I can load my phone with music?

    How are you trying to transfer it and what are your setting on iTunes.  I'm not on a computer that has iTunes at the moment so I'm going from memory and similar issue.  If iTunes is set to sync music then I don't think you can select and drag, if set to manual manage music then you can.  Also make sure you are dragging to music on the iPhone.
    Hope this helps

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • Duplex printing with hp p1102w printer mac book pro with retina display

    duplex printing with hp p1102w printer mac book pro with retina display

    Hello dekcanada,
    I apologize, I'm a bit unclear on exactly what you are asking or describing. If you are asking how you would set up double-sided or duplex printing in Yosemite, you may find the information and steps outlined in the following article:
    OS X Yosemite: Choose advanced print settings
    Sincerely,
    - Brenden

  • How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far asi  pictures but does not open?

    How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far as i pictures but does not open?

    This is not necessarily 100% correct at the current time.
    As Dropbox is encouraging people to set it up for automatic uploading of photos they gradually increment your space as you load more pictures for free at the current time.
    You do start with a fixed 2 GB but if you upload photos you will be awarded more free space.
    You can also open a free account with Flickr - you may have some upload limits per day but you can upload pictures there.

Maybe you are looking for

  • Removing the search bar whilst keeping the address bar?

    I've been using Firefox but since updating to SL I'm wanting to go back to Safari. In previous versions I would remove the search bar and keep the address bar, (as I do in all browsers because I don't use the search bar, instead I search via keywords

  • Faded Text in 10.6.7

    I wonder does anyone else have this problem, you may not have noticed. When I print a colour box that is a Pantone or CMYK mix, it prints fine to a postscript printer (Ricoh Aficio SP C811 DN). Make text in the same colour on the page and the text pr

  • Utility to collect/delete unused links?

    [INDD CC]  I inherited a very long do and have to update all links. Is there a way to collect and delete all unused links from the links palette and the links folder once they've been replaced? Kind of like how the swatch palette has a "select all un

  • Class path problem in Sun Studio Creator

    dear, I have Sun Studio Creator 30 days Trail. i can't compile the EJB Classes. Is there any class path setting in the IDE?. Help me to solve the problem. the EJB class javax.ejb.* package is not found. I am using the deployment server (Sun Applicati

  • Printing Dos Output

    I have set up a program to compile java code with a gui. The program will execute the process as a command, but I am wanting to print out the outcome to a text area so that users can see their errors. Can anyone help?