I'm no longer getting Allow and Remember prompt. I have to manually click the red icon in the upper left to access it. How do I restore the automatic prompt?
Yesterday I visited a site to which I often go, pingtest.net. Normally, when I visit that site, a thin horizontal bar appears at the top of the browser viewing frame. I do not recall what it says, but it stretches the entire length of frame, from left to right. On the right edge of the bar is an x, if I wish to close it. In addition, when this horizontal bar appears, I also get a box which is about six to seven times the height of the thin horizontal bar that appears over the left edge of the thin horizontal bar. This box stretches across the width of about a sixth or fifth of the width of the horizontal bar. It contains something like the following: Show All, Allow, Allow and Remember. I normally click the Show all option, and I normally select Allow Now for all options.
Here's what happened yesterday: I went to pingtest.net, the horizontal bar appeared, and everything seemed normal. However I took no action. Instead, I changed my mind and decided to go to a different URL. My cursor was in the middle of the screen. I moved the cursor up to what I intended to be the URL field, in order to enter a new URL. Unfortunately I didn't move the cursor sufficiently. So, instead of clicking in the URL field, I clicked right in the middle of the horizontal bar. I HAVE NO IDEA WHAT I CLICKED BUT FROM THAT MOMENT TO THIS THAT HORIZONTAL BAR HAS NEVER RE-APPEARED. WHATEVER I CLICKED, IT APPEARS I INSTRUCTED FIREFOX TO NEVER PROVIDE ME WITH THAT HORIZONTAL BAR AGAIN!!!
As a result, I am also no longer getting the grey box with the Show All, Allow, Allow and Remember options.
How can I restore normal behavior, and get the normal horizontal bar and the normal box with the Show All, Allow, Allow and Remember options?
We had another thread recently where the user clicked "Continue Blocking" and thereafter, Firefox never showed the infobar. I posted a way to clear the block so that the infobar would display once again. It's a little involved, but if it's going to keep driving you crazy, see: [https://support.mozilla.org/questions/1011980 reset plugin behavior].
Similar Messages
-
Can't add albums in library to iPhone.
Full question: I have several albums in my library that I cannot get onto my device. I have tried manually adding the albums, but it doesn't work. I can view the albums in "Music," but when I click on "iPhone" they are gone. How can I transfer them over?
-
Allow and Remember does not work
I have a Java message that I have to allow each time I am opening an encrypted email from a certain party. I click on "Allow and Remember" but each time I open a new email from this party the same message pops-up asking me to allow.
How do I get around this?Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
You can inspect and manage the permissions for the domain in the currently selected tab via these steps:
*Click the "Site Identity Button" (globe/padlock) on the location bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab -
Not able to activate Java even after clicking "allow and remember"
Hi,
After opening a website in Mozilla Firefox it shows "Activate Java(TM) Platform SE 7 U. This plugin has security vulnerabilities" and after clicking "allow and remember in red plugin icon in the address bar" the website closes automatically. Again after opening the same website the same problem exists - Not able to activate java.
After opening the same website in Google Chrome "Java(TM) Platform SE 7 U21 has crashed." - this message appears.
Please and Kindly help me solving this problem so that Im able to open the website.
Thanks & Regards,
Akansha.You appear to have a very old version of Java installed - '''''Next Generation Java Plug-in 10.21.2 for Mozilla browsers '''''. It is shown in the Plugins submitted with your original question (click ''Question Details > More System Details'' to the right of your original question). That is Java 7u21, the current version is Java 7u45.
*All Java 7 updates (versions) prior to u45 have been blocked due to security issues - https://addons.mozilla.org/en-US/firefox/blocked/p458
*You can scroll down or use Find (Ctrl+F) to find Java versions that have been blocked on this list - https://addons.mozilla.org/en-US/firefox/blocked/
There are several methods to update Java. I recommend that you update by either 1 or 2 below:
#download, SAVE to your hard drive, close all browsers, run the updater, uncheck items that you do not want installed (if offered), then open Firefox and test.
#*Download link - http://www.oracle.com/technetwork/java/javase/downloads/index.html '''''(scroll down a bit and download the '''''JRE''''' version in the 3rd column)'''''
#*Test Java - https://www.java.com/en/download/installed.jsp
#You can also update using Windows Control Panel > Update
Your are also 2 full revisions behind on Shockwave Flash 11 (aka, Flash or Flashplayer). You System Details with you question indicate that you are using Shockwave Flash 11.7 r700 ### which contains security issues; current version is Shockwave Flash 11.9.900.152.
*Read and follow the instruction in these articles to update Flash
**https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
**https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games
You are using Firefox 25.0; Firefox 25.0.1 was released November 15, 2013. Follow the instructions to update below and read the release notes to see what changed.
*Update Firefox - https://support.mozilla.org/en-US/kb/update-firefox-latest-version
*Release notes Firefox 25.0.1 - https://www.mozilla.org/en-US/firefox/25.0.1/releasenotes/ -
Turn off 'Allow and Remember' for plug-in
I've started really liking that you can allow plug-ins for individual sites, because what that means for me is that I can open a new tab that contains a Video, and Adobe Flash _won't_ start immediately playing it (meaning that I have to hunt down the tab, if I've queued lots, and pause the video).
I made the mistake, however, of clicking "Allow and Remember" for Facebook :-(
I would _really_ like to have a list of the sites where I've told the plug-in to remember, so I can tell it to forget. Is this buried somewhere in a special page like 'about:plugins'?
Thank you so much!Perfect, Ed, that hit the spot!
-
# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server
Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...
-
I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time
I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
Thanks. -
After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.
1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware -
I'm using Siebel 7 eBusiness app for doing SRs on Win7, IE8 and I could no longer navigate back and forth. I got navigator.SWE_historyKeys.1378453334294' is null or not an object. Does anyone know how to solve this problem?
Looks like you have to upgrade to at least 7.8.2.16.
See the Release Notes of 7.8.2.16 and search for "SWE_historyKeys".
Maintenance Release Guide, Siebel CRM version 7.8 (Doc ID 560646.1) -
how can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2
I have configure NFS, I need help configuring the share that I created in the Sun ZFS STOR ZS3-2 to connect with the OS X Open DirectoryHi,
You may try checking the help page for ldap configuration :
https://<Appliance_IP>:215/wiki/index.php/Configuration:Services:LDAP
ZFS Storage supports LDAP, NIS, AD as directory service.
Hope Open Directory is also based on LDAP and may work in similar fashion.
Thanks
Nitin -
I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
Try the link above. Try to find a phone number for your country, call and ask for account security. -
I downloaded Mountain Lion OSX and I can't get onto YouTube, nor do I have facebook notifications on the new feature... Help?
Not sure about YouTube, but facebook integration isn't available until this fall.
-
We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??
hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport -
The message I get recently and often is "Time machine couldn't complet the backup to "LaC TmMachn". Unable to complete backup. An error occurred while creating the backup folder."
Welcome to the Apple Support Communities
See > http://pondini.org/TM/C10.html
Maybe you are looking for
-
Incrementing a string number for date and time
There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to. I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will out
-
2 weird errors trying to install/run Acrobat 8 on my PC. I'm lost!
Hi all! My husband purchased Adobe Acrobat 8 Professional (for Windows) many years ago and has one more install allowed on a computer of his choice. He & I wanted to install it on my Windows 7 laptop. I went thru the whole installation process, inclu
-
Can't see backups with sparsebundle on external hard drive?
This weekend I moved the external HDD I was using for Time Machine from my Macbook to my wife's iMac. Previously the iMac was backing up via an AFP share on my MB. Now, Time Machine continues to back up to the iMac sparsebundle on the external HDD, b
-
Lock object for customer(kunnr) in tcode vf01,vf02,f-28,va01
While using any one of above tcode by using particular customer number(kunnr) ,for same customer other tcode should not allow to access(should be locked)
-
Importing Database Structures in OBI Administration's Physical Layer
Hi, I need to work on OBI EE. Which is installed in a linux box and I'm able to login to the presentation services. Can anyone tell me the best way of designing and deploying rpd to linux box? Do I have to create the rpd in my windows desktop and aft