I'm unable to determine my location anymore ?!

i'm unable to determine my location anymore ?!

go to system preferences - security and privacy - privacy tab - location services - put a checkmark on enable location services.

Similar Messages

  • Unable to determine current location

    My ipad and imac could locate the location but mac book pro unable to determine the location. OSX is mountain lion 10.8.1. Anybody can help me out plz.

    Multiple posts/questions about same topic, problem. I too see this and cannot get it to refresh location of friend. 30 minutes does not help. I cannot make it refresh location or send new location request on a regular basuis

  • Unable to determine current location at this time Mavericks

    Hello,
    I can't get location service running in Mavericks.
    I know it worked before. But somehow it stopped working. It doesn't work with map neither.
    Thanks in advance.

    Perhaps the 'network time server' for the region, that Apple uses, is down at this time(?)
    Not sure how one would go about reporting an issue, to somewhere it would matter...
    Try unchecking the box next to the automatic time zone location item & set it manually.
    {Edit to add: I noticed you asked of this in an older thread, that had suggested this:
    OS X Mavericks: Manage which apps can use Location Services
    http://support.apple.com/kb/PH14318 
    And I looked into that link, but it does not explain your issue.}
    The same item has occurred several times, as indicated by a few similar named topics
    that come up on a search via google of those same words; here's the link to that:
    https://www.google.com/?gws_rd=ssl#q=mac+os+x+unable+to+determine+current+locati on+at+this+time
    You may have to set the TimeZone manually and turn off the automatic location.
    This has been an issue in some places (regional, etc) since OS X 10.6.8. but
    I have no way of knowing if the cause may be the same or another behind it.
    However such an outage (if it could be proven as such) would be difficult to work
    around; short of testing the computer in a different Time Zone to see if that network
    server was working. Then you could tell if the issue is in the Time Zone you wanted
    to be using, and not in the computer itself. A matter of troubleshooting.
    {Since these ASC discussion are generally and simply product users who volunteer &
    try to answer some varying levels of questions, an inquiry here does not constitute a
    contact with Apple, Inc, directly. So please keep that in mind should nobody know
    where to look (if possible) to discover an exact match to your issue.}
    So, see if the clock and time zone work if you do not have the Automatic location set
    and choose the location manually instead. I don't believe a reset of the System
    Management Controller (SMC) or the NVRAM/PRAM may be of help; though these
    do have some bearing on settings in the computer, for different purposes.
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    •About NVRAM and PRAM
    Hopefully you won't have to reset anything but the Date/Time panel in the Mac.
    Good luck & happy computing!
    edited 2x

  • Ipod touch 5 unable to determine my location .

    I am a ipod touch 5 user . It is unable to determine location ! I asked my ISP to allow location service but they told me that there is no such other service !!!! Now what to do ! I am unable to locate or share my location !!! I have a bsnl broadband connection for internet !!!!!

    Is Location Services turned on in Settings>Privacy?
    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    You can confirm that by going to place with a know located router like Starbucks or McDonalds

  • Why are apps unable to determine my location?

    A number of apps tell me they can not determine my location. I have location services turned on for these apps and an active wi fi connection. Why is this happening? How do I fix this problem?

    I have tried many things to reset the iPad and the network. So far, the iPad still thinks it is in New York. What is strange is that my iPod touch recognizes the correct location (02420) and both devices are using the same home wi fi network. If this is a problem related to the node not being in the database, how do I add it. I do not have an iPhone.

  • Unable to determine current location and time

    So this bug has never been fixed (persists since SL)? I have the same in ML 10.8.3 with Location Services enabled...
    Anybody got this working?

    I'm having the same problem.  I recently moved from Oregon to Michigan, i.e., new time zone.  I travel a lot and have never experienced not having the time zone adjust automatically. I'm running 10.8.4 on a 2009 macbook pro. I can't find any suggestions that seem to be working for everyone.
    The weird thing is though, I've been in Michigan for 2 weeks now, and this is the first time I noticed that the time was 3 hours off----which makes me wonder if it HAS been working until today.  But I can't be sure.  Just seems weird that I didn't notice until now.

  • IPad mini: unable to determine location.

    Just got an iPad mini wifi 16 gig. LOVE IT! But for some reason it's unable to determine my location in ANY location based app (including apple maps). I've made sure that I have location services turned on. Any one have an idea of what the deal is?

    I have heard this type of discussion before that something needs to be registered.  I have DSL and know somebody else that has DSL from the same provider.  He lives in a small town and I live rural.  His location services works on his iPad at his home and so does mine when I am at his location but not at my rural home location.  So I know it cannot be that the DSL provider network needs to be registered.  There is another issue - maybe still a registration but not just the provider.  Any ideas?  I really would like to get this figured out.  There are quite a few apps that try to determine my location and cannot.

  • "Maps" unable to determine location after installation of "iOS4" software..

    With the previous version of ipod touch software, "Maps" had no problem determining my location when at home on my Wi-Fi. Now that I have installed the latest iOS4 software, Maps is completly unable to determine my location at home. Any ideas?

    I posted this in another thread on location services and have modified it slightly here. I also believe (based on my own experiences) that wifi signal reception is not as good as it was pre-iOS 4.
    I have been having the problem also. I have a possible explanation. Under iOS4 the atenna power seems to be reduced. How do I know? Because I can no longer connect in locations where I could under 3.1.3. I also see fewer networks in the list of detected networks. Furthermore, apple has disabled any apps which acted as wifi scanners. If these apps were still available, it would be easy to see the reduced range under the new OS. I also lose my connection at home more often (e.g. at the far end of the house, away from the router). I think that location services will work if you have more than one network is detected and/or one has to have a registered address. In more densely populated areas you used to have more networks detected, I used to be able to see networks from neighbors in my suburban when at home in my suburban neighborhood. Now, the number of detected networks is more limited. The result is poorer location determination. This is just my theory based on my observation of poorer network detection for my device and from what others have reported. Was this an unannounced way that Apple tried to limit battery drain?
    Since Apple does not release details on "secret" changes in their OS, we are limited to guesswork and have virtually no hope of a meaningful response from them.

  • My time/calendar can't determine location. Was fine before now says unable to determine location

    I need some help in getting my clock/calendar to work again.  Was fine till recently then reverted back to 2000 with messed up time.  Tried to use set time automatically function but says unable to determine location.  Went to manually set time zone, date and time but the time now wanders off and does seem to properly keep time.  Anyone know what I can do to get the auto function to work again?

    Hey Man I have the same problem, One day the screen just went black and from then onwards it has been reall problematic, I went to the apple store but they wanted about 100 bucks to have a look at it, although they did a diagnostic for free, but it didnt reval anything.
    They said it was either the screen or the graphics card, and each one cost 750USD but 100USD to find out which........ I didnt fork out the cash though, a bit expensive!!!!!!!
    However I did get the computer back up and running, by holding Opt on start up, mostly it goes to the f**king dark blue screen with the vertical lines. But every 10 to 15 goes I can get to the disk utility, If you run the repair disk and repair premonitions, then start up again it should boot up, you may get a day or two out of it before BOOM back the blue screen of vertical death.
    I believe its the graphics thats busted, (which is soldered to the logicboard) so the only to fix it according to the apple guys is to get a new one at 750USD and about 2 weeks to get it done. here is a app called gfxCardStatus, and it tells you which card ur using (there is 2) when the card switches the computer crashes, you can set the app to only use the "Intrergrated card" but you cant watch movies or iweb, camera, just web browsing and text stuff....... the other HD card does all the other heaver graphic processing............
    I hope this helps, but all in all, lots of people have had the same problem and Apple have not declared it a fault on there part, they boast about the quality of there products but in essence my last macbook died suddenly........ I invested in a macbookpro (early 2011) the graphics card is broke, the trackpad doesnt work properly and the screen has screenburn all over the edges and sides........... Seriously!!!! and the reply was buy another computer from the apple guys!!!!!! Pretty disappointed.

  • PB2 issue Bing Maps says 'Unable to determine your current location'

    PB2 issue Bing Maps says 'Unable to determine your current location'.
    please help..

    That happens if you are indoors and the App canot locate your GPS location.
    You may have to take your PB outside for a minute or so so it can get a fix on your location.
    Have you tried Google Maps or the MapApp from App World that also uses Google Maps?
    They are much better than Bing Map.
    DC-IT

  • ADADMIN Relink Applications programs Unable to determine the release ...

    Hi, Everyone -
    Red Hat Enterprise Linux Server release 5.4 Beta (Tikanga)
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release 11
    The Relink Application program process is erroring out ... Please assist
    ===================================================
    OPTIONS:
    Do you wish to proceed with the relink [Yes] ? Yes
    Enter the name of your Oracle Applications environment file below.
    File name [TSTERP2_dallindr187.env] : custom_TSTERP2.env
    Reading product executable information...
    Enter list of products to link ('all' for all products) [all] :
    Generate specific executables for each selected product [No] ?
    AD Administration can relink your Oracle Applications programs with debug
    information. Oracle recommends that you do not relink your programs
    with debug information unless asked to do so by Oracle Support Services.
    Relink with debug information [No] ?
    Relinking selected modules in Application Object Library.
    You are running adrelink, version 115.28
    ==============================================================
    Error:
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not found
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release
    Unable to determine the release number.
    Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correct
    adrelink is exiting with status 1
    End of adrelink session
    Date/time is Fri Apr 16 18:04:19 CDT 2010
    Line-wrapping log file for readability ...
    Done line-wrapping log file.
    Original copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.lsv
    New copy is /tsterp2/appsvr/tsterp2appl/admin/TSTERP2/log/adrelink.log

    Hi,
    Error:
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1409: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1410: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: which: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: file: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1686: grep: command not found
    /tsterp2/appsvr/tsterp2appl/ad/11.5.0/bin/adrelinknew.sh: line 1920: awk: command not foundDid you source the correct application env file before starting the relinking (APPSORA<CONTEXT_NAME>.env file under $APPL_TOP)?
    As applmgr user, what does the following return?
    $ which gre
    $ which awk
    $ which file
    Do you have the directory where those files are located in the PATH (issue "echo $PATH" to verify)?
    Unable to determine the release number.
    Please make sure the file /tsterp2/appsvr/tsterp2appl/custom_TSTERP2.env is correctDoes this custom env file exist? If yes, are all the entries correct in the file?
    Regards,
    Hussein

  • Unable to write at location

    Hello
    When I try to install the Photoshop update patch CS6 at OSX I get the following error;
    Unable to write at location Users/XXX/Libary/Application support/Adobe/ Please provide write permissions to this location and try again. Please help?

    Hello Znerkene
    I understand that it is difficult to determine which forum to post in since there are so many. This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention.
    I'll put I this posting in the Photoshop community so the experts there can help you.
    We also have many other forums relating to other Adobe products
    http://forums.adobe.com/community/
    http://forums.adobe.com
    Out of curiosity, can you tell me how you found our forum page?
    Thanks
    Scott

  • [SOLVED] Unable to determine major/minor number of root device - USB

    I installed Arch on a USB harddrive of mine from within VirtualBox with the intention of running the installation (via the drive) on a laptop in my house. I passed through the drive through by creating a special vmdk (here - it's for "expert users only". ) and installed Arch on it by booting off the Arch 2011.08.19 iso and following the instructions. I do recall the installer complaining because /sbin/mkinitcpio was missing, so I copied over the one from the host (which is also an up-to-date Arch system). After that, everything worked and I was able to boot the drive within virtualbox.
    Then I went and plugged it in to another laptop in the house and, surprisingly (for me at least), it got past GRUB. My joy was short-lived, because it failed just a bit later:
    :: Running Hook [udev]
    :: Triggering uevents...done.
    ERROR: Unable to determine major/minor number of root device 'Waiting 10 seconds
    for device /dev/disk/by-uuid/[the uuid] ...
    /dev/disk/by-uuid/(the uuid)'.
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    sh: can't access tty: job control turned off
    [ramfs /]#
    So I googled around for a while and plugged it back in to my computer, booted it up in virtualbox, and added "usb" to the HOOKS array right after udev in /etc/mkinitcpio.conf. Then I rebuilt the initramfs:
    # mkinitcpio -p linux
    So I plugged it back into the laptop, booted it, and got the same error.
    Later, in an attempt to isolate the problem, I removed "sata" from HOOKS, ran the same mkinitcpio command again, and rebooted the VM. I got what looked like the same error as the one above. yay. So I guess the usb hook isn't being loaded or something like that. (I've since added the "sata" hook back and rebuilt the initramfs so I can mess around in the VM )
    I've tried removing autodetect from HOOKS (saw that in some threads) and trying different USB ports on the laptop, but nothing seems to be working. I also checked to see if virtualbox was providing a bogus uuid or something, but the one it's specifying seems to be correct - I looked in my computer's /dev/disk/by-uuid and it matched.
    Info on the drive (first partition is /boot, second is swap (derp!), third is /, and fourth is /home):
    # sudo fdisk -l /dev/sdg
    Disk /dev/sdg: 500.1 GB, 500107861504 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773167 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00016b3d
    Device Boot Start End Blocks Id System
    /dev/sdg1 * 63 208844 104391 83 Linux
    /dev/sdg2 208845 4417874 2104515 82 Linux swap / Solaris
    /dev/sdg3 4417875 209230559 102406342+ 83 Linux
    /dev/sdg4 209230560 976768064 383768752+ 83 Linux
    Screengrab of my VirtualBox storage setup (just for giggles):
    My /etc/mkinitcpio.conf:
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    # Tried this line instead -- didn't work either
    #HOOKS="base udev usb autodetect pata scsi sata filesystems usbinput"
    HOOKS="base udev usb sata filesystems"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    My GRUB menu.lst:
    # Config file for GRUB - The GNU GRand Unified Bootloader
    # /boot/grub/menu.lst
    # DEVICE NAME CONVERSIONS
    # Linux Grub
    # /dev/fd0 (fd0)
    # /dev/sda (hd0)
    # /dev/sdb2 (hd1,1)
    # /dev/sda3 (hd0,2)
    # FRAMEBUFFER RESOLUTION SETTINGS
    # +-------------------------------------------------+
    # | 640x480 800x600 1024x768 1280x1024
    # ----+--------------------------------------------
    # 256 | 0x301=769 0x303=771 0x305=773 0x307=775
    # 32K | 0x310=784 0x313=787 0x316=790 0x319=793
    # 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
    # 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
    # +-------------------------------------------------+
    # for more details and different resolutions see
    # https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
    # general configuration:
    timeout 5
    default 0
    color light-blue/black light-cyan/blue
    # boot sections follow
    # each is implicitly numbered from 0 in the order of appearance below
    # TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
    # (0) Arch Linux
    title Arch Linux
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
    initrd /initramfs-linux.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,0)
    kernel /vmlinuz-linux root=/dev/disk/by-uuid/b4a677d0-cb0d-4acd-bb09-2dc2f4b9501f ro
    initrd /initramfs-linux-fallback.img
    # (2) Windows
    #title Windows
    #rootnoverify (hd0,0)
    #makeactive
    #chainloader +1
    Last edited by UncleNinja (2011-12-02 15:33:21)

    UncleNinja wrote:
    skunktrader wrote:https://bugs.archlinux.org/task/27385
    Perfect! Thank you!
    Would it be safe to copy over the version from HEAD into my mkinitcpio?
    EDIT: nevermind, derp derp the package is updated
    EDIT again: Actually, it's not.
    I copied over the init_functions in HEAD into /lib/initcpio/init_functions and rebuilt the initramfs. It worked!
    Thanks guys!
    Last edited by UncleNinja (2011-12-02 15:35:20)

  • SQL Server Agent running SSIS package fails Unable to determine if the owner of job has server access

    I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package.  The website and the instance of SQL Server with the agent and SSIS package are
    on the same windows 2008 r2 server.  When the button is operated no exceptions are raised but the SSIS package did not execute.
    When I look in the logfileviewer at the job history of the sql server agent job I see that the job failed with message...
    The job failed.  Unable to determine if the owner (DOMAINNAME\userid) of job runWebDevSmall has server access (reason: Could not obtain information about Windows NT group/user 'DOMAINNAME\userid'<c/> error code 0x6e. [SQLSTATE 42000] (Error 15404)).,00:00:00,0,0,,,,0
    ...even though DOMAINNAME\userid is in the logins for the sql server and has admin authorities.
    Could someone show me what I need to do to get this to run?  Thanks tonnes in advance for any help, Roscoe

    This can happen when the network is too slow to allow a timely completion of the verification. Or the account running has no such right.
    I suggest you try using the SA account for the job as it does not require to poll the AD.
    Arthur My Blog

  • The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

    We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
    The operation failed because:
    Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
    Active Directory Domain Controller \\V-Svr03.mydomain.local.
    The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
    I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
    Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
       Testing server: Default-First-Site\DC1-DEV-OFC
          Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=hookemup,DC=local
             ......................... DC1-DEV-OFC failed test NCSecDesc
    In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
    We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
    Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
    Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

    Ok... I ran repadmin /showreps /v again and it shows no errors
    C:\>repadmin /showreps /v
    Default-First-Site\DC1-DEV-OFC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
    DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
    ==== INBOUND NEIGHBORS ======================================
    CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381490/OU, 16381490/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114817/OU, 114817/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66047/OU, 66047/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098197/OU, 8098197/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    CN=Schema,CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8097482/OU, 8097482/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 65239/OU, 65239/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114149/OU, 114149/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381373/OU, 16381373/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=ForestDnsZones,DC=mydomain,DC=local
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66295/OU, 66295/PU
            Last attempt @ 2012-10-29 13:57:48 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098367/OU, 8098367/PU
            Last attempt @ 2012-10-29 13:58:13 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 115032/OU, 115032/PU
            Last attempt @ 2012-10-29 13:58:25 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381653/OU, 16381653/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
    DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114871/OU, 114871/PU
            Last attempt @ 2012-10-29 13:54:02 was successful.
    DC=DomainDnsZones,DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=mydomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 16381614/OU, 16381614/PU
            Last attempt @ 2012-10-29 13:56:52 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 66325/OU, 66325/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 8098385/OU, 8098385/PU
            Last attempt @ 2012-10-29 13:58:38 was successful.

Maybe you are looking for

  • Create a standby logical database in 10g

    Hi, My OS is Windows 2003, using oracle 10g software.. I want to know steps to create a logical standby database from primary database? I read the Dataguard concepts and administration guide, its confusing where it says to add the roles for primary a

  • How do I set up a shared folder so all user accounts can view photos?

    How do I set up a shared drive for iPhotos for multiple users of my iMac?

  • MySQL database with SQL Toolkit

    Hi, we are using CVI 2012 and the SQL Toolkit 2.2 and we want to connect to a MySQL database. The MySQL database was created with MySQLServer. When we try to connect with DBConnect we get an error. How can we connect the MySQL Database? What do we ha

  • Report for Pending GR for STO

    Dear All, can anybody reply me is there any standard report for Report for Pending GR for STO. if not how can i do with not developing new report ...i mean from exel or etc. Regards, Yashpal Supe

  • Importing keywords from external database

    I have a simple request that seems to be impossible. Back in the days before LIghtroom, I had a database that identified most of my images, cross-referenced to their filename.  Rather than manually keyword these thousands of images, I would like to i