I m unable to loginto SRM  attendance thru portal what could be the issue

i m unable to loginto SRM  attendance thru portal what could be the issue

Hi
Please elaborate your question with more details. Which SRM version are you using ? What transaction are you using in this case ?
Any error / warnings here ?
Are you looking for "Managing Employee Time and Attendances" ?
<u>See these SAP OSS Notes as well -></u>
Note 824757 - Dependencies between mySAP ERP component lists
Note 793148 - Texts on item are not displayed in the auction
Please ask BASIS Team to provide suitable roles and authorizations for this transaction.
Hope this will help. Do let me know.
Regards
- Atul

Similar Messages

  • I have a 13 inch Macbook Pro. I have bought it just 5 months back. All of a sudden, i am unable to turn the mac on. It doesn't even get Charged. What could be the issue ?

    I have a 13 inch Macbook Pro. I have bought it just 5 months back. All of a sudden, i am unable to turn the mac on. It doesn't even get Charged. What could be the issue ?

    If you're unable to turn it on, let alone even charge it then it definitely sounds like a battery issue to me. I'd wait for someone else to reply just to be sure but I think somehow the battery by the sounds of it must have died. However, I could be very wrong.
    If you're still under applecare which you should be then it should be an easy free fix. Hope this helps!

  • On connecting to itunes or charger iPhone 5 beeping continously and I am unable see anything on display. In itunes I can see everything when I connect to computer. What could be the issue with my display and how to fix it.

    My iphone power button is not working so today I decided to replace it, on opening few screws I was unable to continue as I was not able to open all the screws on the iphone. So far I had managed to disconnect display panel & battery only. So I decided to not to replace button myself and I closed it. After closing I am able to see iphone 5 connected to itunes and I can see all my data, however it continuesly beeping when connected to charger or computer. Also I do not see anything on display. Before opening the iphone everything was working fine now I can't see anything on screen.
    I do not see any hardware demage or anything like that, can anyone suggest what could be the problem?
    Please help

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    Everything that cames in the box is included in the 1year warranty, unfortunately you're just outside of that warranty.  Regardless, if the above troubleshooting does not resolve, take the device to Apple and they can determine if the issue is the device, the charger(s) or something else.

  • I have an ipod touch 5 gen AND am unable to unlock scree what could b the problem

    I have an ipod touch 5 gen and am unable to unlock my screen what could b the problem

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT4972 I tried to update my iPhone 3S with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

    I tried to update my iPhone 3GS with iOS, data was restored but on continue with activation in the iTunes stores, it is replying "We're sorry, we are unable to continue with your activation at this time." what could be the reason?

    Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
    Two things come into my mind:
    1) Your iTunes can't access the internet.
    2) Apples activation servers are down.
    That's just my cents, maybe anyone else has an idea.

  • Unable to create new user thru Portal

    Hi,
    I am unable to create user from the oracle portal web page under the Administer tab.
    I have logged in as user PORTAL30 which has DBA rights.
    When I click the Create new user link, it generates an error page WWC-00000.
    Would appreciate if any can help me out urgently.
    OS: NT4 SP5
    9iAS 1.0.2.1
    Vipul
    null

    Cindy,
    Thanks for the solution. It worked fine after changing servername to lowercase.
    The servername was set in in httpd.conf by the 9iAS installer itself. I would like to express that Oracle should have checked before launching or should have listed it in the release notes.
    Once again thanks for the inputs, Cindy.
    Regards,
    Vipul
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cindy:
    I too was having the same problem. I found this in another post:
    "this is reported as
    BUG:1534919
    the solution is to use lower case server name in httpd.conf. It must be in lower case."
    I made the change and am now able to create users.<HR></BLOCKQUOTE>
    null

  • I am unable to click on links at the top of websites. What could be the problem?

    For example, in Yahoo mail, I can not click on "Log Out", "Help", "Options", "Inbox", etc. but I can click on individual messages. In Facebook, I can't click on my profile or status update but can click on the news feed. All of these work in Internet Explorer.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Captivate 6 - I am unable to insert smart shapes.  What could be the problem?

    With the trial version of Captivate 6, I did not experience any problems inserting smart shapes.  Now that I have full license, I cannot insert smart shapes.  I have used smart shapes before and read the documentation and this really seems to be a very simple and straight forward task.  Could you please advise?
    Thanks,
    AT&T Captivator

    Hello,
    Welcome to Adobe Forums.
    Do you have a MAC or Windows ?
    What happens when you insert a Smart Shape ?
    Thanks,
    Vikram

  • SRM 7.0 Portal error

    Hi,
    We are using SRM 7.0 and I logged in into the Portal as the admin.
    When I click on the 'User Administration' tab I get a message saying : "Sorry, your browser/program is not supported by Web Dynpro! " Please advise on what could be the issue. However I dont get such message when I click on the other 2 tabs i.e. 'Content Administration' & 'System Administration'.
    Also under 'Content Administration', I am trying to create my own folder with SRM7.0 content by right clicking on 'Portal Content'. However I do not get any option of creating a 'new' folder.
    Regards,
    Nikhil
    Edited by: sivakumar lakshminarayanan on Feb 21, 2011 1:26 PM

    HI Nikhil,
    What browser/version are you using to access the portal?

  • Not able to create supplier from SRM 7.0 portal

    Hi all,
    I am trying to  create a supplier from SRM 7.0 portal .I provided all the details and while I am saving I am getting an error
    Enter the business partner number.
    I gave LOCAL8 as partner number in company data  basic data and in supplier data tab I am provinding vendor as LOCAL8.
    While I am saving I am getting an error Enter the business partner number.
    The supplier is also not getting saved in the system.
    Thanks and rgeards,
    Rajesh

    Hi,
    Please verify the following details - it may resolve your issue.
    In transaction PPOMV_BBP under the attributes for your vendor group, please ensure attributes are adapted properly so that only one system is affected. (I mean only local system entry should be there).
    Please check the customizing settings for the customizing path - SAP Supplier Relationship Management --> SRM Server --> Technical Basic Settings --> Settings for Supplier Synchronization
    Especially the settings for "Information on Automatic Download from Marketplace" are important as the maintained value there are automatically taken into consideration for various transactions like BBPGETVD (Vendor replication) etc
    For example:
    Entry under Vendor Root column should be proper and without any spaces in between -u201CVGXXXXXXXXu201D
    While creating the vendor, the normal system behaviour is that the content of field 'Central Organisational Object for Bidder' is determined automatically by the system. Please verify whether it is getting derived automatically.
    Regards,
    Guru

  • I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message  saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)"   more........ .

    Would someone be able to explain to me the following issue with Iphoto?
    I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
    "Unable to to assemble  calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
    How can  I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
    Thank you for your help.   

    Apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start
    with Option #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I'm unable to connect to database thru cold fusion

    I'm unable to connect to database thru cold fusion. it
    sometiems give me an error that your uname is undefined , soemtimes
    it gives ur index page not found so i created index page also but
    still im unable to connect to database n update my records..plz
    help me out..im a fresher in cold fusion

    I am having a similar problem having CFMX 7.02 verify my SQL
    Server 2005 Data Sources.
    I am using the sa account for CF to access the db's. But i
    get the following error:
    Connection verification failed for data source: myDatabase
    java.sql.SQLException: [Macromedia][SQLServer JDBC
    Driver]Error establishing socket. Connection refused: connect
    The root cause was that: java.sql.SQLException:
    [Macromedia][SQLServer JDBC Driver]Error establishing socket.
    Connection refused: connect
    Every role in SQL Server has the sa grantor Grant enabled. I
    can also login to SQL Server with the sa account w/o a hitch.
    I don't know what else to do. The server information is set
    to the ServerName port 1433, datasource name and database name are
    the same as the database name in sql server, and the username and
    password are set for the sa account.
    Thanks!

  • Unable to tether android phone thru usb

    after upgrading to yosemite, unable to tether android phone thru usb port

    I am also unable to tether my HTC Android phone since upgrading my 2012 Macbook Air to Yosemite (via wifi hotspot). The Mac connects to the hotspot OK, but cannot connect to the Internet. Traceroute cannot get past the gateway address (i.e. the phone). The data connection on the phone is fine - can browse the internet using the phone's browser.
    This setup worked perfectly on the same machine with Mavericks and I have just tested it with a different Mac running Mavericks and found it to work. So it seems that something has changed in Yosemite to stop this working - has anyone been able to get an Android phone successfully tethered to a Yosemite machine?

  • Unable to replicate SRM users in SAP Portal

    Dear All,
    We've followed the below link to auto replicate the SRM Users in SAP Portal:
    http://help.sap.com/saphelp_srm70/helpdata/en/08/bae789ee8743d5b4cb2fbf93a9831b/content.htm?frameset=/en/08/bae789ee8743d5b4cb2fbf93a9831b/frameset.htm
    But after doing all the configuration steps, we are yet not able to replicate the SRM users in Portal.
    SPML Destination Connection test is successful and all other configurations are done and cross checked.
    Is there any report program that we have to run / schedule for the user replication.
    Please suggest.
    Regards,
    Anurag

    Dear Carl,
    The above link that you've shared talks about replicating user accounts from UME to the SAP System.
    However in our scenario, we want the replication from SAP system to UME. So, it's a reverse scenario.
    The link that I've shared above in my thread talks about my scenario and in fact we've done all the configuration steps also.
    But it is not working at the moment and I believe that there must be some additional setting / trigger point that would initiate the replication.
    If somebody has already come across such scenario, please advice.
    Regards,
    Anurag Gwari

  • When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

    When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

    Hi Jdentremont,
    Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
    the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
    deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
    To troubleshoot your problem, please follow the steps below:
    1.  Navigate to
     “X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
    You should see some photo files in this folder as the following screenshot.
    2. Delete all the files in this folder.
    3. On test PC, delete local cache files.
    %userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
    4. Sign-in Lync with the test account.
    5. Go back to the ABS file share, check if there is any Photo file in the folder.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Unit testing with TLF

    While unit testing complex formating, I hit several problems. Below are simple tests that fail with an error. Does anybody know what is wrong with these tests? Thanks for any hints, Marc     public function test_apply_Link():void         var init:XML

  • Validation option for Vendor payments

    Hi Everybody, We have about 150 vendors for whom we make cheque payments (manual payment processing). Now, we started implementing online payments and currently we are making online payments for about 30 vendors.  We want to create validation process

  • Deploying a war file in Oracle Apps's application server

    Hi all, i have a war file which i want to deploy inside oracle apps's application server, i just want to know the location to put my war file in so that the application server will auto deploy it.And also provide port and url(Application server) wher

  • How to present results from a sql-query in java

    Hi - I'm having problems finding out how to present data from a database-query in a nice looking way in a JFrame. Want to present them similar to the way they are presented in the database. Is there an easy way doing this?

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.