I'm unable to make my site go live, although I have a paid subscription

Hello, I have a paid student subscription to CC and I want to make my temporary site live, however I keep getting this message:
I don't understand because I'm being told that I have 5 websites because of my subscription, but when I launch it it gives me this message. Is there a reason for this, am I doing something wrong? I would really like to understand and resolve this.

Unfortunately the Creative Cloud student plan does not include 5 free sites.

Similar Messages

Unable to make a DVD from a book I have made in I-photo 09

Hi.
I have just loaded i-life 09 and seem unable to make a dvd of books I have made in I-photo.
This was a straight forward process with i-photo 08.
It is as if it tries to pull one image only from the album.
I generally make the book up, go to Share... click Send to I-dvd, and then it all loads up from there.
I then create the finished dvd, of the book already made.
This does not happen now.
It tries to up load and comes up with preparing or sending to I dvd, but does nothing from that point, where it used to before.
I can only think it is a glitch with i life 09.
Is there a fix out there!!
Thanks in advance.

I can't answer your question, but maybe you can help me as you say it is easy to transfer an iphoto08 slideshow to idvd and burn it. I transferred the slide show OK and its name appeared on the idvd main page but when I selected it and burned it I got only a burn of the default first idvd page with the rotating theme and the name of my slideshow on it! The slideshow did look correct when I doubleclicked on it and it played in Preview. How do i get it to burn?

Unable to make connection to XBox Live

Is any one else experiencing a loss of connectivity to XBox live? I'm on the 71.188.80.0 network segment and all day yesterday we were unable to connect to live, same thing this morning. This is a connection that has worked for the last couple of years. When I ping the live node I do not get a response and a trace route disappears after 11 hops in the MSN network, but I can ping the xbox web site and testing with a 1500 byte MTU works fine so it's not an MTU issue. My gut feeling is that a new router or interface was added to the FIOS network sometime yesterday early morning and they've affected the routes being sent to Microsoft. Either that or MSN has a routing loop but I doubt this would only affect FIOS customers (saw a few posts online all from FIOS customers regarding this)
If you are not able to connect to live, can you post your external IP address first three numbers and maybe we can see if there's a commonality. I'm on hold with FIOS support right now so hopefully they are aware of this but usually a routing issue takes a while to get recognized.
Solved!
Go to Solution.

OK, I get support online and they tried to blow me off saying there is no way it can be a FIOS issue. As usual they want to wash their hands of any connectivity issue. There is a possibility that they have a wrongly advertised route in their tables though it's more likely to be a routing loop on the live network they could at least check the routes. Still the immediate jump for the support agent to say it's definately not a FIOS issue is maddening.

How do I make new site go live?

Hello, I hope somebody can help me out with this.
My client's site is hosted by and developed in Business Catalyst. They wanted changes and improvements made to the site and these were done on a new build that is now sitting ready to go in the Trial Sites section. What I would like to know is, what is the proceedure for turning off the existing site and replacing it with the new site? Is it a case of deleting the existing live (paid for) site and upgrading the new site to a paid plan? I feel that this isn't the correct thing to do.
Any help with this would be greatly appreciated.
Thanks in advance
Grant

Liam read the subject line of your forum thread and immediately formed his own conclusion. He should have read more to understand your situation.
Unfortunately, one of the harder development workflows for BC is a redesign. In order to test ecommerce and some other elements without impacting your original site requires that you create a new site, but there is no merging involved officially on BC's end. What you'll really need to do is make sure everything is in working order and then copy your /Templates folder and any other folders you need in /Layouts or /_System to your local directory and re-upload those new assets (styles, images, layouts, templates) to your old website and then change the default template in the BC Admin area to your new template.
There is one other major obstacle, though. If you used heavy BC modules and such in your redesign, each of those are unique to your new trial site. If you are using content holder modules or showing specific catalogs in ecommerce in your markup, when you copy those pages/templates to your old site the ID's for the data will be for your trial site and won't work on the old one so before updating your templates on the enw site you'll need to replicate all your modules on the old site first by hand I guess and reinsert the module codes after you've uploaded new pages/templates.
I don't think there's an official way to merge just modules, catalogs, templates and pages into an old site, but your new trial site redesign is really just missing the CRM and Traffic data from your old site. IF you are a paid partner, open a support ticket and see if they can merge your old customer data and reporting to your new trial site. That would be the easiest thing if they can even do that.

Verizon iPhone unable to make or receive calls

Hello everyone, my Verizon iPhone is intermittently unable to make or receive calls (yes I do have reception). Has anyone experienced this before? I've called Verizon customer service and they were no help and suggested replacing the device at the apple store which I did. Verizon tech support ended up saying they would look into my issue with the network team, and contact me, which they never did. Apple sort of suggested it's a Verizon issue, and was not going to replace it for that reason, until I told them my battery was dieing quick too (luckily I had a screenshot of usage). So they're kinda blaming eachother- and I'm stuck in the middle with no support/help. I've tried ALL of the troubleshooting procedures. Do you think it's a Verizon or iPhone problem? What should I do?
One reason I think it's a Verizon issue is, I've had 2 iPhones that had the same problem- what are the chances of that? One reason I believe it's a Apple iPhone issue is because ALL of the Verizon phones in my household work perfectly all the time, except mine. Again it's intermittent, which is why I recorded videos.
Here is my brother's iPhone calling mine (both Verizon): http://www.youtube.com/watch?v=PWvZN90_adk
My iPhone calling brother's: http://www.youtube.com/watch?v=9ZFS5iiNrus
My iPhone calling a friends phone: http://www.youtube.com/watch?v=CGcB6uH0Ax8
My friend calling my iPhone: http://www.youtube.com/watch?v=OCnJc4e_DAQ

I have tried all the troubleshooting methods on the iPhone before this one multiple times by myself and with verizon tech support. Anyways, I gave it a try on this iPhone except the restore, because I want the apple genius to be able to run a diagnostic on it. I did the restore on my prior iPhone and he said he couldn't run the diagnostic because I restored it.
My results from the troubleshooting link:
1. Check Signal - I have 3/5 bars, still doesn't work
2. Reset Network Settings - I did that, still doesn't work
3. Verizon Update Preferred Roaming List - My iPhone gets "Call Failed" when dialing *228 (btw I already did this the day I got this iPhone).
4. Check Carrier - 4 of the 5 Verizon phones in my house work perfectly, so I doubt it's a carrier issue at this point. But I will give Verizon another call tomorrow morning to make sure.

IPhone unable to make outgoing calls after 2.2.1 update

After updating to the 2.2.1 firmware I am unable to make calls with my iPhone. I have reset it with the backup I made and as a fresh backup and the problem has still not been resolved. The problem only began after I updated. Help?

i had exactly the same problem, i had to send it back to apple via O2 and they had to give me a new iPhone, now ive got one that works on 2.1 im not updating it till the next update comes out!
so yeah take it to your nearest O2 store and 3 weeks later everything should be sorted

I've updated my trial version of muse to a paid version and it still won't let me let my site go live! Can someone help me?

I want to publish the site that I just made and it said that it won't go live until I have a paid membership. So then I paid for a membership and when I go to manage the site and click launch site it still says it's on the trial version. Will someone please help? Thank you!

I also thought buying hosting directly from business catalyst would but the site says it has launched but when I typed in the url it doesn't pull up. It says "server not found" so the site says launched but I but can't go to it. Even after I've made the custom url to it.

Admins are unable to edit all sites?

Hello and help!
We have designed three websites, all under the same site plan. From the admin panel, the admin is able to edit both site 1 and 2, but not site number three. Right now, we have
A-Master (admin is able to edit)
B-Master (admin is able to edit)
C-Master (admin is able to edit)
D-Master (admin is unable to edit)
A, B and C Master all have links that lead to D-Master, but you are unable to click on them from the admin panel, only edit them. D-Master DOES have it's own domain name. Does this make a difference? A, B and C master are all under the same domain. Keep in mind, D-Master was designed under the same site plan.
Any help would be so appreciated! Thanks!

Master pages can not be edited with IBE at this time.

Unable to make changes to your software when executing software in SC

I often got below error when trying to execute software via SC. The package is successfully distributed to my DP and I can confirm that the client machine trying to execute the software is within the managed boundaries configured in the console.
I don't know what else that I need to look at to troubleshoot this. What are the log files to look at? execmgr?

Check the boundaries the client will be in and make sure it's reporting back ok to the 2012 site
For more info. check below link
https://social.technet.microsoft.com/Forums/en-US/b77f7235-32d3-4c21-a4a3-a7e336646e73/unable-to-make-changes-to-your-software?forum=configmanagersecurity
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Unable to Make a Call with Active Subscription | I...

Hi,
I Have an active subscription for India 2500 mins which starts on 16th of every month
Previous month i exhausted my 2500 min on 6th may itself, so i opted for anther 800 min subscription and made call uptill yesterday 15th may (800min also over yesterday morning)
but now the condition is like this that the payment of 2500min subscription has taken place with autorechrge on 13th may 2015 itself. but i am unable to make call to india. whenever i try it shows insufficient credit.
while the subscription page show this:
"Your subscription has been suspended as you have exceeded your allocated free minutes. Your free minutes will start again on May 16, 2015."
but today is 16 may 2015, then why the call is not being connected
Help Please

I think this could be a prompt from the Flash Player plugin. To adjust your microphone and camera permissions for Flash, you can use the following page:
* General setting: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.html
* Site-specific settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager06.html
Note: Macromedia was the original developer of Flash before being acquired by Adobe.
Does that fix it?

I have an iPad 2 3G/Wifi. Since downloading 5.1.1 I am unable to make purchases on Safari?

I have an iPad 2 3G/Wifi. Since downloading 5.1.1 I am unable to make purchases on Safari. When 'checkout' is selected, the browser redirects me back to the site log on screen. This also happens on my wife's 4S and on multiple websites. Any ideas?

Have you got cookies enabled : Settings > Safari > Accept Cookies > From Visited ?

Newly activated Palm Treo 700wx unable to make calls

Just activated an old Treo 700wx and I am able to use the internet but unable to make calls or receive text messages. Just ends the call right after it began. Tried hard reset, soft reset, re-activating... nothing.

I suggest you go to the HP - Palm web site and to the community forums there. You will see a thread how Syniverse, a subsidiary of Altel, ATT, Verizon, et. al changed their coding schemes and that the Palm Treo 700WX can't accomodate the new scheme. I contacted the CEO of Verizon Wireless and they fixed it for me only.

Just recently, Firefox messages that it is unable to open ne site or page

When I have a site open and several sub listings are on that site, it will the majority of times, lately, say that firefox is unable to open that site or refused to

See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

Unable to make microphone to work on NVIDIA MCP55 onboard sound card

Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)

Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7

I'm unable to make my site go live, although I have a paid subscription

Similar Messages

Maybe you are looking for