I'm using ver. 3.4.5. After having a problem importing some photo's I now have all my library showing up in the one project. I'm worried about just deleting this project in total. Any help would be appreciated
After importing a small group of photo's I noticed that aperture didn't create a project for them as usual. The only place I could see them was in last imported. While last importwas open I selected the photo's and told aperture to creat a new project using the selected one's. I named the project with the date using all cap's so I would know which one it was. What I have now is my whole library showing up in this one project. If I import more pictures It does two things. A new project is created as it normally does. These new thumbnails also show up in the problem project. I tested to see what would happen if I deleted one old picture while the problem project was open. It went to the trash. It was also removed from its original project. If I ignore this what seems to happen when importing at this time is that a new project is created that you can open, it acts normal. The file only contains the correct amount pictures. If I then go to the problem project the thrumbnails show here also.
About 6 mos ago I switch to Aperture from iphoto. I never combined the two libraries. I have around twelve thousand photo's. December 1st I backed up my imac with Time Machine. I don't want to back up again until I get this problem in check.
Thanks for any help, Dale
Hi Andy,
I'm using Mac OSX 10.7.5
No the one with the caps seems to be working normally.This project with the caps now has four files. Originally I created it with about fifteen. I deleted eleven of them and edited the remaining four. The four files each have one version and its original. It wasn't until after I completed this work that I noticed the privious project when opened and scrolled had the entire library in it.
The test I did went like this. With the problem opened I deleted one file that I new existed prior to this problem. I than opened that project that I new it was from to see if it got deleted and found it gone and moved to trash. I think that tells me that if I delete all the files in the problem project I'll be in trouble. I also have inported to projects each with one file that I edited. They are working fine. I took a look in the problem project and this last
two imports show the thumdnails in it.
Currently on my Hard Drive I have 275 GB free space. My photo's take up 138 GB. As I said on Dec. 1st I backed up the system using time machine. So all of Dec. and part of Jan. inports won't be on it. I could work around the problem project and move those file to a safe place. I think it best not to back up the system with Time Machine until I'm confident the Aperture is runing properly. I'm happy that I control these system backups manually.
I'll need to find out how to copy the Aperture library to another place. I'm sure I can poke around and fined out the process.
Thanks Andy for the come back!
Similar Messages
-
Hi i have just had a second hand ipod touch from my grandson but he is not very helpful with it.
Can u get onto the internet when not using wifi such as in the car or such like. my phone uses 3G can you use gps or anything.
i really do not know anything about ipods
Any help would be appreciated."Can u get onto the internet when not using wifi "
No.
it connects to the internet ONLY via wi-fi -
I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..
I am a windows XP user and I downloaded I tunes 10 and my computer slowed down to a snail pace.. Any other problems out there?? Any help would be appreciated..
-
I can see the Application folder in the Finder window but can't seem to get it back on to my dock.
Any help would be appreciated it!Close all windows and quit all applications.
Launch Finder by clicking the Finder icon in the Dock.
Right click the "Application" folder and select "Get Info".
At the bottom of the resulting window there will be a blue folder icon in the preview section.
Drag the whole window to the right side of the desktop,closer to the Dock.
Now drag the blue preview folder to the Dock right of the separator line.
Right click the folder icon and select "Folder" under "Display as" if it is not shown as folder.
Best. -
hello, I'm trying to burn a playlist from itunes to a cd, but I keep getting a message saying "the attempt to burn a CD failed because of a medium write error" can anyone tell me what I'm doing wrong. I'm not so tech savvy so any help would be greatly appreciated. thanks
I'm not familiar with this error, but check the following:
-Is your disc a CD or a DVD? You want a CD, not a DVD.
-Is the CD blank? You'll want a blank one.
-Maybe the disc is scratched and cannot be used. Try another CD.
-Maybe your disc burner is broken. If you have another, try it. -
Im having issues with my screen it appears to be blurry in one section
If the memory is low, double click the home button to bring up the multitask bar, tap on one of the apps shown until they start to shake, then hit the little red minus to close them. After all apps are closed that way, press the home button again and see if it works now.
Maybe you'll reset the device as well by pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing this, but it can clear some glitches as well. -
The DM-4800 and Logic see each other, the firewire shows as 'locked' on both. Can pass audio back and fourth, no automation from the Tascam though. I know its either a midi setting or control surface settings... but I'm stumped. Newbie at Logic here. Any ideas what to check? Thanks in advance!
Plug in the usb lead.
-
I did the update to take out bugs etc; now when I try to open an app, it asks for my Itunes ID before it will open; this is a pain; has anyone else had this problem or knows how to correct this, assistance gratefully appreciated, thanks
Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this. -
In the numbers app 1 spreadsheet keeps trying to update. It is an excel sheet and I can not delete the sheet as it keeps trying to update? Any help would be appreciated.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
I'm using imovie 10.0.3 with OS x Version 10.9.2. or some reason I can't double click on iphoto events to siadplay the pictures within that event. I've rebuilt my iphoto library, but nothing seems to work. Any help would be appreciated.
Hello All,
Also no answer but am having the same problem. All my catalogueing via folders is up in smoke and no external HDs (where I would normally directly store raw footage when importing) showing up on the iMovie interface. It is a pain the arse to go back to the earlier version - why APPLE, pray tell, do you continue to lower expectations user-friendly functions. Shall try the option+open for a library but this too is extremely inconvenient if it works like iPhoto because you have to log out to log in to a new library whereas I just want to be able to see my multiple HDs directly from the iMovie menu and then the folders within folders I have layered in there - to make it easy to FIND STUFF. Wake up Apple, you are NOT meeting your customer's needs or desires.
Thanks to the posters who are helping the rest of us lost in the dark with possible solutions - free fix-its for Apple which they don't deserve. -
I have an ipad3. I brought brought a wireless AV Box to view videos on the TV. I have tried this on both hdmi TV an can only get sound no picture. Any help would be appreciated. I am new to iPad so not too tech please.
What iOS in on your iPod? The Users Guide says:
Viewing Photos, Slideshows, and Videos on a TV
You can use the Photos app to view photos, slideshows, and videos on your TV with
any of the following:
Apple Component AV Cable
Â
Apple Composite AV Cable
Â
Apple Digital AV Adapter and an HDMI cable (iPod touch 4th generation)
Â
Apple VGA Adapter and a VGA cable
Â
The Digital AV Adapter supports high-definition video up to 720p with audio.
The Guide also says the Video app can use TV out. -
Once firefox 4.o was installed, when switching to full screen while watching any internet video produced a white screen but audio still playing. Switching back to small screen has a still video but audio still going. Had to exit and and restart video or open a blank new new tab then delete it and then small screen video would play. Using a mac os 10.5. Disabling hardware acceleration did not fix. went back to firefox 3.6 and all is ok. Any help would be appreciated.
Your hardware was never designed to run that old a version of OS X, it's best to update the application or find another application that is more up to date. Installing Leopard simply will not work on your system.
-
After updating os to OSX 10.9.1 I can't open any new pdf files. I get a message saying It may be damaged or use a file format that Preview doesn’t recognise. I can still read older saved files but no new ones arriving by email. Also can't attach a pdf to an email to send out. Any help would be appreciated.
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you
bgar
On what computer operating system is your Premiere Elements 13 running on?
What are you (manually) or the project (automatically) setting as the project preset?
(See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio (even if fields look grayed out).
What are the properties of these source media, including file extension? The brand/model/settings of the camera that recorded the
video may give us this information.
When the source media hit the Timeline for the first time, is there an orange line over their content? Or is there
no colored line and an orange line appears over them only after you have edited them?
Please elaborate on "poof" after rendering the Timeline content by pressing the Render button above the Timeline content with the orange line over it.
a. Media Offline displays?
b. Other?
ATR
Maybe you are looking for
-
Change Gl Account in F-28 Transaction
Sir, There is File Bank Charge in F-28 T-code, when Post the Document, This Bank Charge in Posting in a GL. but I want to post the this Bank Charge in different GL on some condition. So Plz Guide me how to do. Thanks ! Ram
-
I have a 2 hard drive RAID set up with identical Iomega hard drives. They are both connected to a FireWire 400 hub which goes into my computer (iMac G5.) Whenever I'm doing something hard drive-intensive (exporting video from FCP, using Compressor wi
-
Win 7 Pro 64 bit Pre load replace Win 7 Pro 32 bit
How do I pre-installed win7 pro 64-bit system to replace Win 7 Pro 32-bit system? Thanks
-
Instance failure, in System.Data in sql 2012
On Win Server 2012 Standard I have a C# app that runs fine with sql 2008 express. When I installed sql 2012 express I get "instance Failure" source: System.data. when the following LYNQ query executes: //MessageBox.Show("Starting GetInitialPortStatus
-
Default value for a reference cursor argument to a package function
I'm trying to do the following to allow the caller to pass in a ref cursor arg or a SrcTextID (internal). Anyway, I'm just trying to use defaults, rather than overloading the routine, but I can't figure out how to default a ref cursor variable. FUNCT