I Maked maked update by itunes after finishing the ipod notworking, I Maked maked update by itunes after finishing the ipod notworking

I Maked maked update by itunes after finishing the ipod notworking, I Maked maked update by itunes after finishing the ipod notworking and it apper on it picture like charger I plug it but not charging have a picture like battery but not move hope to get a solution asap

The picture is telling you to charge the iPod battery, by leaving it connected for about 4 hours, till the battery picture becomes all green.
Have a nice day!

Similar Messages

  • Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?

    Well!
    If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
    This does not have to be huge just big enough to house your most current Jobs
    Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
    This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
    The Drobo would be relegated to Vaults and backups
    You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
    This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-)

  • HT201210 i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • ITunes no longer asks for my password before making purchases or updating apps

    iTunes no longer asks for my password before making purchases or updating apps... my restrictions are set so that is should ask for a password immediately but it doesn't seem to ask for this since iOS7... anyone got any ideas????

    Try changing Settings > General > Restrictions > Require Password to 'immediately'

  • Ever since i updated my iphone and it ended up in recovery mode, my itunes wont detect any of my devices.. When i plug it in the computer instead of making that two toned noise it makes a weird one toned noise twice as if there's something wrong..

    A while back when i was updating my iphone 5 itunes said an error had occured and my iphone ended up in recovery mode.. i brought it to the apple store they fixed it and i lost everything. supposedly the only things that were backed up on my icloud were 22 contacts from my previous iphone.. But i was still greatful i left with a working phone, however when i went home and plugged it in the computer itunes detected that i had a new phone and asked me if i'd like to back up my phone, surely i clicked yes and in a few minutes EVERYTHING came back! now a day later im here trying to connect my ipod and iphone to itunes and it will not detect anything. I uninstalled and reinstalled it back... still itunes is not responding im going on a road trip!! i need new music on my devices!! Someone help pleaasseee!!

    hey mill1640,
    Did you ever get your iPhone to register with iTunes? I just upgraded as well to Snow Leopard, and my my isn't recognized at all also.
    If you did get this resolved, I would appreciate a little suggestion in the right direction.
    Many thanks,
    Josh

  • HT1926 reinstalled itunes after unistalling it due to error message during update. after it was completly unistalled still has the same error message: service "apple mobile device" (apple mobile device) failed to start, verify you have sufficient priviled

    I was prompted to update itunes this evening. I did and in the process, it came up with the following error message: Service "apple mobile device" (apple mobile device) failed to start. Verify you have sufficient priviledges to start system services. I unistalled itunes completly and reinstalled but am still getting the same error message. If I click "ignore" the program will finish downloading but will not launch due to "not being installed correctly". Please help, I use this program alot with my first grade classroom and they're expecting their listening center in the morning.

    Hey I finally got an older vesion of itunes to work!!! 10.7  x64 for windows 7
    After uninstalling all apple products even  quicktime
    I had to delete everything from (program files, and program  files x64, program data,)
    And all downloads from apple, and I went in to search deleted  other stuff from apple, and itunes
    But definently not my itunes library and Playlist
    Down loaded 10.7 x64 for windows 7, but checked (do not start  when done)
    Then I emptied my recycling bin and restarted my  PC
    I ran geek tech tool box same as reg cure pro, also PC Tools  registry cleaner, and CC Cleaner
    Then I emptied my recycling bin and restarted my  PC
    And wallah... It finally works, and I Love the older version  anyways.
    Easier to download and transfer  music!!!!!

  • IPod Touch (4th gen) will not sync music after the latest iTunes update

    I'm using iTunes on a PC with Windows 7 and after the latest update (iTunes 11.2.2), it will not sync with my iPod touch 4 (also updated to the latest possible version - iOS 6.1.6).
    Before the update there was no problem with the sync. And this iPod has always been synced only with this computer, and this iTunes library.
    After the iTunes update, several songs on my iPod were greyed out and unplayable (the library plays fine in iTunes).
    Now, when I try to sync, iTunes goes through all the steps, saying it finished syncing, without any error message but there is no actual change on the iPod.
    I've tried deleting all the music on the iPod, to resync the entire music library anew.
    Again, iTunes went through all the steps, finished "syncing" and nothing - and, of course, all the music on my iPod is now missing.
    When I check the "On this iPod" option in iTunes, the entire song list shows up there but appears greyed out and unplayable.
    On the actual iPod device, there is absolutely nothing in the Music app - no songs, no playlists.
    The iPod always shows "no data" in the Music app.
    Sometimes iTunes shows that I have 18GB of music on the device, sometimes it shows 0GB ...at one point it showed "no space available". But it has plenty of space - 23.5 GB of available space out of 32GB.
    To fix this I've tried the following:
    - automatic sync, manual sync, manually adding/deleting songs on the iPod, autofilling and replacing songs;
    - resetting my iPod by holding the (on/off and home buttons) and resetting through the "reset all settings" option on my iPod;
    - reset and restore from backup;
    - uninstalled and re-installed iTunes on my PC.
    - I've run the diagnostics tool in iTunes - all tests passed;
    ...plus various other suggested solutions I have found in the similar topics around here.
    (I've checked and there are no restrictions to the songs, the computer is authorized, etc.)
    Absolutely nothing works and it is very frustrating, as I usually only use the iPod for the music.
    Please help.
    Violet

    Hello, VvioletT. 
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues syncing your iOS device.  Here are a couple articles that I would recommend going through when experiencing this issue.
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/ts3125
    Cheers,
    Jason H.

  • While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this I

    While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
    I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
    Please can somebody help me, so I can make backup.
    Greetz,
    Derk

    It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
    from: http://support.apple.com/kb/HT4946
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

  • I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother.

    I'm trying to restore my iPod and the update says it's going to take 9 hours and then after 2 hours or less it will say something about "unable to finish update." Why is this?? My iPod is a 3rd generation that I got from my brother and even when I download an app that doesn't require my iPod to be an iOs 4.3, it will download, but it won't open.

    Did you check your security software settings to be able to restore? iTunes for Windows: Troubleshooting security software issues

  • Dear Apple Support,  Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..  After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to resto

    Dear Apple Support,
    Good day to you.
    This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
    After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need  to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
    After restoring it my ipad is now opening and it is like new that i need to set up again.
    I set up again until i reach the apple id and password.
    I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
    What will I do? Please help.
    Thank you
    Sent from my iPhone
    Begin forwarded message:
    From: Apple <[email protected]***>
    Date: October 9, 2013 at 11:53:53 PM GMT+4
    To: ****
    Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini 
    Dear Leslie J.,
    Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
    If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
    Apple Support
    <Email Edited By Host>

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

    I have a user on an iMac 10.6 connected to our domain.  She uses Outlook web access for email on our exchange server.  Last week she received the following message which is randomly preventing her from sending emails.  She claims no attachment was involved in the original email when this all started.  I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue.  I realize this may not be Mac related but thought I'd give it a try.  She did say it occurred once over two days while working on a PC but it continued over the past weekend.
    If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
    This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • IMovie HD 6.0.3: After making 10 movies where I clipped portions from a larger clip (and exported the smaller clips), suddenly iMovie clips are much shorter after I export them.

    Hi there,
    I am using iMovie HD 6.0.3 on an older MacBookPro (OS X, 10.4.11).
    I took an AVI video and imported that into iMovie HD.
    I then created smaller clips out of that - like editing a 20 minute video into small, 30 second clips.
    I made about 10 of these smaller clips, exported them using "expert settings," and burned the results to DVD. These all worked fine.
    Suddenly, the final product that I export is much shorter than the clip I created. For example, I'll create a 30 second smaller clip from the original. When I review this 30 second clip, it is what I wanted.
    When I export this 30 second clip, it makes a QuickTime movie that is only 23 seconds. (The first 10 I made did not do this).
    I tried extending my clip by 7 seconds, hoping to end up with a 30 second clip after exporting. The result was even shorter - like 15 seconds.
    I have checked disk space - it has at least 500 GB free space. I have tried exporting the clip to both my laptop and to an external hard drive. The results are the same.
    I just tried using the "crop" feature to see if my end product was better - but it was the same.
    Does anyone know what is going on? Why did this start after making 10 successful exports? What can I do to get it working right again, as I have 3 more clips to make and am running up against a deadline.
    Thanks so much!
    Heidi

    Since I can't edit this post... (Why?) I'd add: fast forwarding and fast reverse (shift key and arrow left or right) the HA files is also not smooth. They play alright. I'm surprised iMovie can't handle them either. I didn't have a problem with the earlier camcorder's HA files... (All were converted MTS files using Movie Converter.)

  • TS3694 I was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is

    was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current  ios 6.0.1. plese send me some thing that is useful

    Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to  one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
    Thanks again, Sandra2474.

  • I updated my phone to ios 8.3 and now it wont turn on, i tried to restore it on itunes csuse i said thats my only option but everytime its about to finish it says an error occured, what do i do?

    iphone 6 wont turn on after i updated it to ios 3.8. tells me i have to connect to itunes so i did and it doesnt let me restore my phone, it always says an error occured, wha do i do?

    If it's in recovery mode, the data is already gone. Why did you never back up your important data?

  • After clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    after clicking "yes" to the question "do you want to update itunes now", i waited 2 hours and 15 minutes and it was still "loading".  i turned computer off thinking something was wrong.  now itunes won't open at all.  do i need to download itunes again?

    Did you actually download the installer from Apple or did you use Software Update.  You can download the installer http://www.apple.com/itunes/download/
    Maybe I'm old fashioned but I would consider repairing permissions first using Disk Utility because something caused this to go wrong the first time.  And of course make a backup of your whole library first.  It shouldn't happen but some have complained about their libraries being wiped out by iTunes updates.  Better safe...

Maybe you are looking for