ADRL assembler command causes fatal error

Hi,
I'm trying to use the following assembler instruction:
adrl r12, 5f
but I get:
/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/../libexec/gcc/arm-appl e-darwin9/4.0.1/as: fatal error in /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/../libexec/gcc/darwin/ arm/as
make: * [arm/dsputilarms.o] Error 1
Why is the problem? I'm using the iPhoneSDK v2.1.
Thanks for your help!
Yonas

hiya!
(didn't we already meet off in another thread about this sort of thing?)
When Firewire is connected, charges Ipod just fine until Itunes starts up and tries to access the Ipod, in which case Windows gets blasted out of existance with a fatal stop error.
what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're just seeing a flash of a blue screen, we can use this technique to slow it down a bit:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

Similar Messages

C-s links auto populated: causes fatal error

Hello I have had to manually create and import my map file
for my project. This
map file is locked. It has its own name. When I go into the
map file editor and
look at the project map editor, it is automatically creating
some CSH links
every time I force an update. Why is RoboHelp creating these
links? These links
cause a fatal error in the compiler. I have to manually
"unassign" these links
before I can compile. If anyone can advise, I would
appreciate it.
Thanks,
Z.

Never mind...it was caused by obsolete map file

Plugin causes fatal error

running nt 4 platform with plugin 1.4.2_01. The java plugin causes a fatal error when attempting to view an applet in netscape 6+ and IE. If netscape communicator 4.74 on the same system does not have the same problem. Applet can be viewed ok.
The error arises out of an attempt to load the jvm.dll from the hotspot directory. This is not present in the jre install.
Any suggestion as to
how the problem can be fixed?
how the problem can be traced?

I' ve got the same problem. Have You got any sollution ? Please e-mail me : [email protected]
Thanks

Air Instruments Technology plugins causes FATAL Error

I am using Mainstage 3. I installed the Air Instruments plugin Hybrid, Loom and Vacumm Pro. It used to work fine until this week when I started getting a fatal error on Mainstage. Since then, I have uninstalled the plugins, reinstalled Mainstage, and the issue persists.
The plugins work perfectly on Logic Pro X.
Any advice?

On Tue, 11 Feb 2014 00:50:45 +0000, Brisnger wrote:
Razer Game Booster Diagnostics Report v2.0 Version： 4.1.59.0
Date： 2014/02/10 17:47:03
This forum is the wrong forum for your question.
Repost to one of the forums at:
http://answers.microsoft.com
Paul Adare - FIM CM MVP
All that blue light from Orthanc at night? That was
Saruman, trying to moderate
-- news.admin.palantir-abuse.sightings.

Driver upgrade causes fatal errors

I've been trying to upgrade a Lecroy DSO driver from Labview 6.1 to 7.1. Randomly, or so it seems, I'm getting the following fatal error:
LabVIEW.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is being created.
My question is where is that error log and will it help me diagnose what is going on.

Hi Jim,
This KB may be helpful...
Where Are LabVIEW Error Log Files Saved?
http://forums.ni.com/ni/board/message?board.id=150&message.id=698
Regards,
Chris J

Windows API dll (user32.dll) cause fatal error

Hi,
On a setup, we using a touch screen. The LabView Software is running on full screen. I need to deactivage my front panel if the screensaver is on to prevent user start anyting. I use SystemParametersInfoA from user32.dll and this is working good, except, if I quit the software. "myexe a fin a error and need to close" (someting like that, my XP is in french).
I don't have issues in debug mode, this error happen in exe mode.
I use LV 8.6.1. Do you have any idea why?
Thank you
Solved!
Go to Solution.
Attachments:
test.zip ‏10 KB

CFiset wrote:
Thank, I will take care of this details. But, unfortunly, this not working.
uint32_t SystemParametersInfoA(uint32_t SPI, uint32_t 0, uint32_t *value, uint32_t False);
SPI = 114 = SPI_GETSCREENSAVERRUNNING
If *value != 0, screensaver ON, else scresaver OFF
Still have the fatal Windows error.
Thank
I noticed the Call Library Node having a rather strange path to user32.dll on the initial load. Do you happen to have copied that DLL somewhere and referencing it with full path in your VI?
That is a very big NO-NO! user32.dll and many other Windows system DLLs do weird things to the system and are utterly bad behavioured if you try to load another copy from somewhere else on disk than the system directory. Just change the library name to user32.dll only and let Windows pick the right DLL from its system directory.
Another problem with specifying the full path to a copy of such a DLL is that LabVIEW will think you need to have this specific DLL in a built application and will include it in the build. However your user32.dll is almost 200% VERY incompatible to just about any other Windows system out there, because of Windows version, Service Pack, and bug fix upgrades as well as different language versions of Windows.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Lookout Direct causing fatal errors

any ideas what would be causing this condition to occur in run time or in development about every 30 minutes to an hour???
win xp sp2 on dell poweredge 860 server
this is screen shot of the error log in windows
i have also posted a support request on Automation direct forums but no answer from them yet either
please help if you can.............. customer is getting very upset that there is no stability in the system
thx

Sorry, should have looked a little better at the version numbers. Just saw the vista stuff
Mike Crabtree - Lead Developer
Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
(866) 964-6948 / (760) 247-9512

ITunes 9.2 causes fatal error and "blue screen of death"

I installed Itunes 9.2 this morning and whenever I tried accessing this version of Itunes, my system hangs and showed me the infamous “blue screen of death”. I have tried uninstalling and reinstalling Itunes but nothing seems to work.
Anyone encountering this problem and is there any way to solve this? Thanks!

I was using v9.1.1.12 and could not synch my iphone with outlook although with other versions there was no problem so was keen to install the new version of iTunes yesterday (9.2.0.61). Installation went fine, iTunes opened up perfectly and read my music library and hey presto synched my phone with outlook. I was well pleased. Closed down itunes and went back to working A couple of hours later as my secretary had updated my calendar I plugged in my iphone and itunes started to open then.... disaster. The blue screen appeared.
I restarted again, and again and again and the same thing happens everytime iTunes was opened (independently or when plugging my iphone in). Tried 4 times.
I did a repair using itunes installer. No change stilled blue screened when opened. I then had the bright idea of uninstalling iTunes totally and reinstalling. No change - itunes begins to open then causes blue screen.
The next step I uninstalled itunes. Did a disk defrag and then thought I would reinstall version 9.1.1.12 and install the newer version over the top. But hey you have guessed it, the older version would not open because the library it was using had been created with a newer version i.e. v9.2.0.61 - nice one iTunes!!
So at the moment I have no iTunes at all so am stuffed. So, iTunes solves one problem but creates another. Do they ever check these things???
Help!!

Preview PDF causes fatal error

Whenever I click on the Preview PDF tab, I get a visual c++ debug popup window saying that the program has terminated "abnormally". Is there a known bug, or is this an isolated issue with my installation? My work around is to just save the document and view the pdf in adobe reader.

Hi,
Do you work with the Designer opened for a long time ?
Is your form too long ?
Do you do frequent copy-paste operation in the script?
Do you have many depenedent fields?
If your answe to these question is yes, then there might be problem in your form. I have also experienced this kind of problems.Below are few discussions which may help you.
http://forums.adobe.com/thread/742191?tstart=30
http://forums.adobe.com/thread/742783?tstart=0
Thanks,
Bibhu.

ITunes Freezing & Causing Fatal Errors

Whenever I attempt to play a CD on my itunes it will play 6 seconds of the track & then freeze. Not only can I not exit out of Itunes, I must remove my battery & unplug my laptop to get my computer to turn off. Has anyone else had this problem? I have already tried removing & re-installing the software but the problems persist. Any advice or suggestions are appreciated.

Whenever I attempt to play a CD on my itunes it will play 6 seconds of the track & then freeze. Not only can I not exit out of Itunes, I must remove my battery & unplug my laptop to get my computer to turn off. Has anyone else had this problem? I have already tried removing & re-installing the software but the problems persist.
hi Tameca!
are you getting a blue screen? if so, what text and numerical codes are you getting? here's a reference to some of the common ones:
http://kadaitcha.cx/stop_err.html
(will be back to check in eventually.)
love, b

Fatal error 70: Cannot open calendar database

When I try to start my iPlanet Calendar Server(iCS) 5.0, the following error
occurs:

Fatal error 70: Cannot open calendar database
When this error occurs, first try to recover the database using the
"csdb" command line
utility. For more information on the
csdb utility, please
refer to the iCS 5.0 documentation at the following URL:

http://docs.iplanet.com/docs/manuals/calendar/ics50/ag/calagxa.htm#13586

If you are unable to recover the database using the
csdb utility, use the
following steps:
<OL>
<LI>Completely shut down the calendar server to ensure that there are no
stray calendar processes still running.

<LI>Change directory to your iCS database directory (the default directory
on Solaris is
/var/opt/SUNWics5/csdb/).

cd /var/opt/SUNWics5/csdb/

<LI>Create a temp
directory.

mkdir temp

<LI>Move all of the
*.share files to the
temp directory.

mv *.share temp/

<LI>Restart the calendar server.

Note: The *.share
files will be rebuilt upon startup.
</OL>


theFatal error 70: Cannot open calendar database error can occur after a migration from Netscape calendar server, using the ncs4migrate utility.
The problem can be that the log* files in the csdb folder (or wherever you put the calendar database) are not owned by the same user that runs the calendar server - commonly called icsuser.
ie.
-rw-r----- 1 root other 5499425 Jun 25 14:17 log.0000000142
will cause fatal error 70:
change the owner, thus
-rw-r----- 1 icsuser2 icsgroup2 5499425 Jun 25 14:17 log.0000000142
and it should work!
Regards,
- jd

Fatal Error Acrobat failed to send a DDE command

Hello all. I have a fillable form I developed using word 2010. I am trying to convert it to a PDF form. I open acrobat and select star from wizard from the Forms menu. I browse to find the word document and open it. I save the PDF document and everything looks good. I get a progress bar that says "Please wait, reading Adobe PDF". This is very slow progress and then I get the Fatal Error message "Acrobat Failed to send a DDE command". I click ok and the progress bar continues still very slowly. I get the same message again. I click ok and the progress bar continues. The progress bar gets to the end and just stays there. Nothing happens. I waited for an hour and then cancelled it. When clicked cancel, the PDF document opens with my form but without any fillable fields or drop down menus. I tried to do it again a few times and I get the same error message. I am using Adobe Acrobat 9 pro version 9.4.2. Thank you in advance for your help.
Gonzalo

AA 9 will not work for anything but the print function from WORD 2010. The only version of Acrobat that is compatible with OFFICE 2010 for PDF Maker is AA X. Thus, open WORD and print to the Adobe PDF printer. Then open the pdf in Acrobat. Go to FORMS>Add or Edit fields. Since you have no fields at present, Acrobat will ask if you would like to detect form fields. Answer yes and you will get a first cut at the form fields. Yes, you will likely have to add some more and change the ones that Acrobat estimates, but you are on your way.
The other two options you have is to go back to WORD 2007 or earlier or upgrade to AA X (or find someone with AA X and WORD 2010). These methods are pretty much your options with the software combination that you have.

Acrobat X Pro does not open, gives fatal error - "Acrobat failed to send a DDE command"

Acrobat X Pro does not open and gives fatal error - "Acrobat failed to send a DDE command"
It either does the above or the application starts and is listed in the system processes but never physically opens on the desktop for viewing.

AA 9 will not work for anything but the print function from WORD 2010. The only version of Acrobat that is compatible with OFFICE 2010 for PDF Maker is AA X. Thus, open WORD and print to the Adobe PDF printer. Then open the pdf in Acrobat. Go to FORMS>Add or Edit fields. Since you have no fields at present, Acrobat will ask if you would like to detect form fields. Answer yes and you will get a first cut at the form fields. Yes, you will likely have to add some more and change the ones that Acrobat estimates, but you are on your way.
The other two options you have is to go back to WORD 2007 or earlier or upgrade to AA X (or find someone with AA X and WORD 2010). These methods are pretty much your options with the software combination that you have.

Fatal error when trying to execute a dml-command with OLAP API

Hi,
when I created an OracleConnection using the jdbc thin driver. The connection works fine.
But when I try to execute any dml-command with an SPLExecutor the following fatal error occurs:
oracle.express.idl.util.OlapiException: ORA-37118: Message 37118 not found; product=RDBMS; facility=ORA
ORA-06512: at "SYS.GENCONNECTIONINTERFACE", line 66
ORA-06512: at line 1
Any Suggestions ?

Hi Priya,
1.The entries for the initialization in the BW system are contained in the RSSDLINIT table for the DataSource/source system combination. Compare these with the entries in the ROOSPRMSC table in the OLTP system.
2. If there are NO entries in the RSSDLINIT table in BW, use transaction RSA7 to delete the delta queue for this DataSource/BW application combination in the source system (OLTP).
3.Once you deleted all the entries,In Infopackage scheduler option,delete all the init selections to proceed further.
In which system u r going to do this.....Quality or production.(Better,you check with basis to delete the entries.)
Regards
Kumar

Adobe Captivate 5.5 "Fatal Error" Crash Caused by "CS Live" in CS 5.5 Programs

This should be an official bug report. Forgive me if there is a more effective way to submit a bug.
Adobe Captivate 5.5 crashes with a "Fatal Error" when the user launches a CS 5.5 program while Captivate is running in the background. This only occurs when the user is signed into Creative Suite's "CS Live" in the Creative Suite programs.
This problem can be reproduced easily by launching Captivate and Illustrator side by side. Then the user must sign into CS Live through Illustrator. Captivate will crash with a fatal error every time. I have confirmed with Captivate running while launching Photoshop, Illustrator, Dreamweaver, etc.
You can see a quick video here: http://www.youtube.com/watch?v=ayDDSN7rSY0
There is no solution to this bug. I have tried nearly everything, following the framework at Troubleshoot launch issues, problems | CS6, CS5.5, CS5
• Clearing the cache / rebuilding the profile directory in User/AppData/Local/Adobe/Captivate 5.5.
• Reset Windows fonts and deleted all Adobefnt*.lst files / rebuilds on program launch.
• UAC is disabled, I have administrator rights, and the application is set to start in "Run this program as an administrator" for all users.
• Switching graphics from Intel to Nvidia and back for all Adobe applications.
• Disable activation on both Captivate and the Master Collection, then reregistering .
• Deactivating/Uninstalling/Reinstalling the program entirely.
For now I will stay logged out of CS Live in my Master Collection programs.
Windows 7 64 Bit
Dell Latitude E5440
CPU: i5-4300u
GPU: Intel HD 4000 / Nvidia GT 720m switchable
RAM: 8 GB
HDD: 500 GB ST500LM00

Hi there
Official bugs are filed at the link below:
Click here
Cheers... Rick

ADRL assembler command causes fatal error

Similar Messages

Maybe you are looking for