I need a few suggestions

ok my i pod lost its memory. i went to plug it into my computer so that i can reload my songs onto my ipod mini but my computer shows that the songs are loading where it says how much space you used but my ipod still says i have no songs. what do i do?

If you're using Windows, you may also want to read this.
Strange iPod behavior
FORUM TIP
When you post, you should always give details of your computer and operating system as very often any advice given is specific to this.

Similar Messages

I forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes

i forgot the passcode for restrictions, i read few suggestions here and tried the ibackupbot, but now i cannot find an o my previous backups in itunes.it keeps saying cannot load sync services. i have reinstalled the latest itunes
please help

but its nothing there, no music, no apps nothing. i had upgraded to iitunes 11 and went back to 10.7 that is when i lost them. apparenty i havent lost contacts, photos.
but i have backed them up previously. i was using ibackupbot and i can see them all there, but i cant install them back to my phone nor to itunes.

I need a few networking APIs! any help appreciated

Hi people!
I need a few APIs for a networking project, namely an API that does some kind of port scanning similar to the one found in NMAP, and another one that does packet sniffing, similar to that found in CPAC. Anyone knows where can I find any libraries that do anything like that? any help would be greatly appreciated.

I have looked in a few open source sites like sourceforge.net or www.opensource.org but I can't find anything... I also looked it up using google and I found a few CPAC libraries, but they're all for C, none for Java. I was wondering if anyone knew where I could look...

Need ur valuable suggestions on performance in sap BI

Hi All,
Hope every one is doing great. Need ur valuable suggestions on performance in SAP BI.
1. what is meant by DB partitioning, in which scenario we use it and what the steps to do this task.
2. Navigational attributes are use when v want to make use of this attr in reporting with certian actions. My question is do navigational attributes improves the performance if so how and if not what are the draw backs.
3. Multiprovider are use to access the data from different infoprovider to generate the reports.
In what way multiprovider inproves the performance??
4. Number Range buffering when it is used what r the steps has to follow ??
5. what is the procedure to calculate the DB statistics. what are the technical conents v install for this, when we install this befor the development are after completion of the developement and in what way they are helpfull to measure the performance.
Thanks in Advance
KK

1. what is meant by DB partitioning, in which scenario we use it and what the steps to do this task.
http://help.sap.com/saphelp_nw70/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/content.htm
2. Navigational attributes are use when v want to make use of this attr in reporting with certian actions. My question is do navigational attributes improves the performance if so how and if not what are the draw backs.
Nav Attribute:-
The dataflow performance/space is affected in the infoobject load, since the sid tables is growing with navigational attributes
The dataflow performance/space is not affected in transactional data (except for the aggregates).
So every navigationa attribute in an infoobject can be added to the infocubes without any cost.
The performance in query is affected, but the solution is simple: do not use!
Please check the following thread:
Re: Navigate Attribute
3. Multiprovider are use to access the data from different infoprovider to generate the reports.
In what way multiprovider inproves the performance??
--THis causes performance degradation as OLAP has to divide the query in many sub-queries.
4. Number Range buffering when it is used what r the steps has to follow ??
5. what is the procedure to calculate the DB statistics. what are the technical conents v install for this, when we install this befor the development are after completion of the developement and in what way they are helpfull to measure the performance.
--For DB Statistics :
Ref : SAP Note No: 588668
http://help.sap.com/saphelp_nw04/helpdata/en/19/f832ac5d4611d4aa1500a0c9430730/content.htm

I have a few suggestions to the developers of operating systems Mac OS and IOS. How do I do? How to contact them?

In my head there are a few suggestions for improving the software product that you produce. In aspects IMPROVED interface and adapt to the realities of some applications of the CIS countries. How can we contact you? In my arrangement of Skype, ICQ, email and telephone.

If you want to report issues to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering.

I need a few beta testers

I have the title creation macro working.
This macro is run from a Microsoft Word document. I wrote it on Office 2003 but it should work on newer versions. It runs on 2003 because I have the compatibility pack.
Here is how it works:
You create a title in Premiere Pro using the font and positioning that you want to use. Get it just right. (One line of text only though.)
Change the text of the title to "xyz" without the quotes.
Export the title as a title. (*.prtl)
Open the MS Word document and either type in the text you want to use or paste it in from another document.
I limited it to 9999 titles but I doubt that will inconvenience anyone. (I actually only tested it to 9990). That many titles takes quite a while though. (55 minutes) Heck, it takes quite a while to import that many into Premiere Pro for that matter.
Once you have the text in place (make sure that there isn't a blank line at the end or you will get an empty title), you just double-click where it says to double-click.
It will ask you which is the master file you want to make copies of. Then it will ask you for the file name and location you want to use for the copies. It will append the numbers 0001 through 9999
Then it proceeds to make your copies using each line of text for a new title.
When it is finished, just import the titles into Premiere Pro and drag drop to the timeline. Or automate to sequence.
Deceptively simple. I didn't write much of the code. I understand it, but only after studying what was kindly given to me by a master VBA guy on a VBA forum. Kind of like if you were a newbie around here and Jim Simon or Ann Bens offered to edit your video for you after you asked a question. It was phenomenal. Although it might have been more like what I did for the people I created intros for. Not sure just how much effort he had to put into it. But it sure works great and the code is simple, and clean.
OK? So now I need a few beta testers before I just throw it out there to the world of Premiere Pro users. If you would like to take it for a test drive, let me know in this thread.
If you are concerned about letting a macro run on your system, prevent it from running and just read the text from the Visual Basic Editor yourself. You will see that it doesn't do anything sinister.Then allow it the next time.
Just do me one favor. If you change the code to make it better, please share it with everyone.
Thanks,
Steven Gotz
http://www.stevengotz.com

Really? 272 views of this post at the time I write this and nobody wants to create multiple titles based on a single title using text from an external program?
Wow!
We see the question all the time, and yet nobody wants to try it out?
OK. I will just wait until somebody asks again and offer the untested solution. Seriously, this is not the response I expected. Not after years of seeing requests for this feature.

A few suggestions for FCP

Using FCP to record material directly via Capture now, I have sometimes wished for a few more options:
* being able to view elapsed timecode of Capture-Now in a seperate window.
* Having an option of running a 'recording in process' signal out of a USB or serial port whenever capture now is actively capturing. By continually writing out a '1' on any one wire in the USB connector, thus enabling it to be interfaced with an external light thru the use of optocoupler circuitry.
* having an option of rejecting a 'Capture now' request by user if hard disk space or certain capture now time cannot be completed due to hard disk limitations, thus warning the user that capture now will not be able to reach specified time limits.
Some other options or suggestions on my wishlist:
* an option turning off 'beep' sound when playing back unrendered audio
* having an option to 'continue all' or 'ignore all missing media' in every media missing dialog when opening up FCP with multiple projects starting up
* having an option of starting up with no projects open by holding down the apple key (or other key) when launching FCP
* Having an option of cancelling all project openings with the locate media dialogue
* being able to keep playing sequence when you alt-tab or multitask to another application
* being able to disable countdown when using the voice-over utility, thus starting to record directly
* being able to use voice-over utility even where there is no underlying video
I already sent these suggestions via the feedback option in FCP, just wanted to share them with you all for discussion.
Message was edited by: VidarFreyr

Having an option of running a 'recording in process' signal out of a USB or serial port whenever capture now is actively capturing. By continually writing out a '1' on any one wire in the USB connector, thus enabling it to be interfaced with an external light thru the use of optocoupler circuitry.
NO clue what you mean by this. Sorry. Does any other NLE offer this?
having an option of rejecting a 'Capture now' request by user if hard disk space or certain capture now time cannot be completed due to hard disk limitations, thus warning the user that capture now will not be able to reach specified time limits.
You mean a warning that your disk space is running low, and to stop the capture, not ABORT (thus losing what you already captured) when your hard drive space reaches a certain size of remaining space?
option turning off 'beep' sound when playing back unrendered audio
The point of the BEEP is to tell you that your audio needs to be rendered to play. Would you prefer silence? Convert your audio to a format FCP works with...AIFF 16 bit or WAV.
having an option to 'continue all' or 'ignore all missing media' in every media missing dialog when opening up FCP with multiple projects starting up
ALready there. Click FORGET.
having an option of starting up with no projects open by holding down the apple key (or other key) when launching FCP
Already there. Hold SHIFT.
being able to use voice-over utility even where there is no underlying video
The way the VO tool is designed is to add voiceover to existing video. That is the basic design. If you want to record VO without using a sequence, just use the Capture tool.
Shane

Love the program - just a few suggestions

I have to admit, it is awesome to have Microsoft creating a product to use on a Mac to connect to RDP sessions! Not to mention free and for the most part, works great.
However, there are a few things I think you could really improve the app with minimal coding and legwork.
Have an option to create "folders" of remote desktops in order to categorize, for example, workstations apart from general purpose Servers apart from Domain Controllers. With as many remote boxes as we use on a regular basis (around 75),
it is very tedious looking for the correct entry in the huge list. The search box recently introduced helps...but sometimes I can't remember the exact name of the DC I'm thinking of - so a folder system would be great. By the way, it seems like
the coding might already include limited folder functionality since there is the default "My Desktops" which can be raised or lowered and the "Remote Apps" section.
The other thing for easily finding the machine your looking for is to be able to apply "tags" or some sort of metadata to each remote desktop connection so that you can search based on a tag and not just on the name of the connection.
This is a minor issue and more of an annoyance than a bug, but I typically work using three monitors. Generally use all three in remote sessions also. Let's say I need to go to Firefox on my Mac while still connected - I just go to the Dock
and click Firefox and depending on which monitor it is opened in (space to be technical), the remote session will remain open in the other two spaces while firefox pushes the RDP out of the way while I'm using it. However, when going back to the RDP
connection, most of the time the full screen does not work properly. There exists scroll bars in the window and it is not fully "full-screened" for lack of a better term. The easy fix is to take the session out of full screen and then
go back, or to disconnect and reconnect. I think the issue only occurs on the monitors (spaces) that are NOT the primary space (e.g. the one with the dock).
Other than that, I think it's a great benefit to both OS X users as well as Microsoft - kudos for bridging the gap. As much as I am a huge fan of all things Mac and *NIX, Microsoft definitely has the cutting edge when it comes to high quality, low
bandwidth requirement remote console connections. Unfortunately, the OS X remote desktop system still works via VNC, which can hog several megabits (or more) per second easily - so, I give MS major credit on the innovation of the RD Protocol!
Thanks for the consideration of these suggestions.
SIETEC

Hi,
Thanks for the suggestions and I will forward this to the product group.
Best Regards.
Jeremy Wu
TechNet Community Support

Need EXPERT's suggestion for APEX CHART SERIES

Hello Everyone,
I have been trying to solve an issue with my apex line chart. The scenario is as follows:
I have a table called revenue. revenues per year are saved in it. and revenues are generated from three sources which are also saved in the same table.
I have made a line chart on it. works well.
Now I have to show that if the value of one of the sources had fallen, how must have it affected the total. I made a number field that takes an estimated change value, and build my sql query with it. it works but the problem is that it changes the non-affected source too. it must change the value of the affected source only and hence the total value.
I hope I make sense and anybody can suggest something.
bold or I will put it this way, how can I write a select statement for a chart series so that one of the rows value does not change and the other two change. ... ?
Edited by: Samooray92 on May 30, 2013 2:41 PM

Samooray,
Let's work with this question since there is more detail here than in the other one. {thread:id=2543702}
First it's always help to know:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
And sometimes this information as well.
Theme
Template(s)
Region/item type(s)
When a question goes unanswered for a while, there is no need to reply to it or to start a new question. You can edit the original question and just add "Bump" at the bottom and save the changes. This will bump it back to the top of the question list. And by that time, you might think of additional information you can add to the question.
Say, why would a question go unanswered? Well, easy questions and frequently asked questions with well-known answers can be answered right away. Your question seems more complicated and I don't think we have all the information we need to understand exactly what the question is.
You are doing a "series" chart. What kind of series chart: bar, column, line? What is each series? For example, components of revenue might be 1) sales, 2) licensing revenue and 3) other. Then you might have one series for sales, a second for licensing revenue and a third for other.
Could you mock up a trivial example on apex.oracle.com http://apex.oracle.com/pls/apex/f?p=4700:1:0::::: ?
Regards,
Howard

Need Advise and Suggestions-Oracle 10g

Hi,
I have been working on databases as DB developer(mainly PLsql)--Oracle 10g
Recently,i have joined in a particular position where I have been asked to find out areas where
improvement is necessary / or areas where improvement or changes would help very much and also gradually implement all best practises avaialable.
So,could you please help me with these queries
(1)What are the most important areas that i can start with the database which would impact largely the entire database.How can i start with it? any steps or process
(2)I had once taken a report out for the expensive SQLs running.But that dint help much...because those SQLs were used temporarily on and off.
Similarly,what are the other points to be looked on.
(3)Things which can be replaced with the industry standarad better ones fully.
an example would be...like.."following a particular naming format,or coding style,etc
Thanks
Rohit

Hi Rohit,
This is a pretty huge subject. To start, I'd say you need to talk to the business. Talk to the users of the database, cause they are your customers. Get a clear understanding of the most critical business processes. Start with the most critical ones, and get performance profiles. How long do they take to run? What's the customer's perception of the process performance? If it's acceptable, move on to the next one. If it's not acceptable, you'll need to dig deeper. Look at each piece of the process. Where is the most time being spent? Can it be improved? This step will be a combination of process improvement and setting the correct expectation. Often, the user doesn't really know what is realistic in terms of performance. If you have a 2 billion row table that needs to get full table scanned, expecting a response time of a few seconds just simply isn't going to happen. You need to clearly convey that to the customer. On the other hand, at the same time, you should be on the lookout for real improvements. If you can re-write the SQL or add an index, and eliminate the FTS on that 2 billion row table, maybe a response time of a few seconds is actually realistic.
It's all about understanding the system, and understanding the customer's needs, and how they intersect. It will be an iterative process, and will take some time.
As to "best practices", I'm not a fan of them. Understand your system, understand your customer's needs, and understand how Oracle actually works. If you can master that, you'll be unstoppable. Note that many, many people, much smarter people than me, have spent a lifetime trying to master those three points... :-)
Good luck with your new job!
-Mark

Few suggestion for WP8 - if at all given a thought

I have recently upgraded form Nokia N8-00 to Nokia Lumia 925 and immediately noted few very important things missing.
1: I could transfer most of my data from N8-00 to Lumia 925 except calender entries and notes. For me all calender entries and noted are equally important as my contact book and messages. I attribute this to absence of support of Nokia Suite to WP8. This was never the issue for all my previous upgrades from any Nokia to next Nokia phone. It's immensely annoying. Also now, as there is no "SUITE" for WP8, I can not back up (contacts, notes, to-do, calender entries, messages) my cell to my PC. I always have to rely on some data connection or WiFi to upload it to cloud. It's so useless that just to back the cell up I have to use data connection which is most unreliable in my country (except metros).
2: I use the cell for photography. It indeed does a nice work for me. But again..just 10 GB user available memory, which keeps going down as new phone updates and/or new software are installed. No support for expandable memory, no support for USB OTG. Have to rely again on most unreliable data connection to upload to cloud. Or else stop shooting when memory is full. This was never the issue with N8-00 as I could connect any mass storage device via USB OTG and transfer the data.
3: Location service: I don't understand why I have to turn location service on first and then open HERE maps? Why can't it be turned on automatically for maps and drive? If I turn location service on, all other apps use it and drain battery, if I turn it off, nothing can use it and battery is saved. Why can't it be selectively on just for the apps I need. For N8-00, GPS positioning used to turn on only for navigation and nothing else.
4: Smart dialing. Why was it removed? Most used featured by any cell phone user and available on each phone in the marked except so called high end WP8.
5: When camera is on, the volume rocker key still adjusts volume. What can I say now? Should it not adjust the zoom instead?
6: Store frequently shows many updates for the installed apps...but I can not select which to install...either all or none.
7: New SMS appear anywhere in the messaging, you may find it at the bottom too. They appears as per the previous messages sent by the contact. Delivery reports also appear a new message??? You can not see only sent message as there is no option to sort.
I may still find many new problems which I don't know how and why were ignored. Hope Microsoft pays attention to correct them. At least do not remove the features those were already there.If anyone finds anything more or any solution for any of the above things, you are most welcome.
Solved!
Go to Solution.

hi mate, we appreciate the feedback but as this is a user to user forum only for Nokia products and services, you are best served by contacting Nokia directly by clicking the Nokia Support link at the bottom of this page, and contacting Microsoft also at http://windowsphone.uservoice.com

Need some help & suggestions in designing Crystal Report

I need to arrange my data in the following manner:
I need to group my data by a field and need to show multiple information for that record at the same row level and then include some crosstab information. I realized that I cannot have multiple information at the same row level for a group.
As an example, please consider that the group field is Name and A and B are two records returned based on the grouping field. I also need to show 'Description' and a color coded box for that record.
And then I need to show the cross tab data for that group.
I need a table something like what is shown below:
                                                          X  Y  Z
A.Name A.Desc A.ColorCodeBox    Var1    0  1  2
                                                  Var2    2  3  4
                                                  Var3    2  4  4
B.Name B.Desc B.ColorCodeBox     Var1    0  1  2
                                                  Var2    2  3  4
                                                  Var3    2  4  4
Where the numbers are some values and X,Y,Z are the column headings and the numbers are some values.
Could you please provide some suggestions as to how this can be achieved? I am using the default Crystal Reports that ships with Visual Studio 2008 Prof. But if there is some other feature available with any other version, we can consider switching to it.
Thanks in advance.

Here is how my table is laid out.
col-1    col-2     col-3              col-4 col-5 col-6
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
As you had mentioned, I am creating two group headers in my group section where the first group header contains the following and overlays the second group header.
col-1    col-2     col-3
field-a   field-b   field-c
And the second group header contains the cross tab information.
          col-4 col-5 col-6
    r1 11111 22222 33333
    r2 44444 55555 66666
    r3 77777 88888 99999
And I suppressed the column headings (col-X) from both the groups using the formula that you mentioned. But here is how my table is being laid out
col-1    col-2     col-3              col-1 col-2 col-3
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
                                                                           <- blank line
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
I have already done a fit section and made sure there is no space. Also my crosstab table contains string fields and I am suppressing the row and column totals in the crosstab as I do not need them.
Do let me know if you have any ideas on this.

Need Itunes sync suggestions - ATV Day 2

Hello, I have tried to sync my itunes to my ATV. Not all the songs/albums are sync (it seems it is sync very slowly). It is taking forever to sync. Is this normal? How long should it take (about 500 albums - about 4000 songs). Any suggestions on making it sync faster? I am using a Wifi connection from my MacBook. Thanks
DAVE

dsym wrote:
Hello, I have tried to sync my itunes to my ATV. Not all the songs/albums are sync (it seems it is sync very slowly). It is taking forever to sync. Is this normal? How long should it take (about 500 albums - about 4000 songs).
I think I can answer this one.
I take it your single first of all.
Ok Dave, when it's done loading, you'll be married and have 2 kids.
You might have come across my post 'Day 2 w/ATV'
I learned a few things in the past 30 hours. My ATV is 32Gb.
Your model must be 40Tb.
Just to fill 32Gb took all of today constantly re-selecting content to remove to make space.
You might try an ethernet connection between the 2 devices to see if data can process faster.
I haven''t tried to confirm, but in theory it's supposed to work.
Any suggestions on making it sync faster? I am using a Wifi connection from my MacBook. Thanks DAVE

Need helpful purchase suggestions!

Swamped with work, from home and need to get wife on her own bookkeeping computer. (I apologize I have no time to research on my own)
1 - I have a G5 (with no airport card, I'll have to get one)
2 - I want her to have a Mini
3 - Want the wireless connection (Airport)
4 - She will grab Quickbooks files over the network (from mine) - and she and kids will surf and play games (little stuff - not graphics intensive, oldest is 9)
I don't understand what I need in an Airport base station.
She will need to print to my printer. And I would like the iTunes option to patch into a home stereo.
Do I have to have both base stations?
I think that is the only question. Please make suggestions or ask questions.
Thanks! Tg
Dual 1.8gb G5 Mac OS X (10.4.7)

...can I not get the iTunes functionality from the Base Station Extreme?
No, only the AirPort Express has the audio out port.
The Extreme is faster too is it not?
No, they are the same.

Needs Your Valuable Suggestion

Hi All,
I have been facing a typical problem related to SQL. Please let me if you have any solution/queries.
Table1 Structure
ID     DPLY_NM     DESC_TX
100001     All Currencies     This parameter allows coverage of all currency codes without
100001     Excluded Cust IDs     Customer account IDs of the Firm
100001     Excluded Trader IDs     Trader IDs of the Firm excluded
100002     Short Sale Times Window     Number of seconds prior to the
100002     XYXZ     XYZ
100003     HR Min Trans Amt     Minimum total transaction
100004     Included Desk IDs     Minimum percentage at
Table2 Structure
ID     DPLY_NM     DESC_TX
100001     All Currencies     This parameter allows coverage of all currency codes without
100001     Excluded Cust IDS     Customer account IDs of The Firm
100001     Excluded Trader IDS     Trader IDs of the Firm excluded
100002     Short Sale Tim Window     Number of seconds prior to the
100003     HR Min Trans Amount     Minimum total transaction
100004     Incl Desk IDs     Minimum percentage at all level
In the above two tables, there is difference between the DPLY_NM and DESC_TX there are four possibility, i have to do log as below condition
DPLY_NM     DESC_TX     Result which we have to Log
Y     Y     No Need to log
Y     N     Do Log
N     Y     Do Log
N     N     Do Log
I have to compare the table 1 with table 2 and log the descripencies as given in above conditions. and the final log should look like-
log start
Difference in display name
Table1     DSPLY_NM
Table2     DSPLY_NM
Table1     DSPLY_NM
Table2     DSPLY_NM
Table1     DSPLY_NM     Extra
Difference in description
Table1     DSPLY_NM
Table2     DSPLY_NM
Table1     DSPLY_NM
Table2     DSPLY_NM
Table2     DSPLY_NM     Extra
log end
I followed the following apporch
I made a master table (MT) of having the all daat of table 1 and table 2 with the flag. The master table looks like given below:
SCNRO_ID     DPLY_NM     DESC_TX     FLAG
100001     All Currencies     This parameter allows coverage of all currency codes without     T2
100001     Excluded Cust IDs     Customer account IDs of the Firm     T2
100001     Excluded Trader IDs     Trader IDs of the Firm excluded     T2
100002     Short Sale Times Window     Number of seconds prior to the     T2
100002     XYXZ     XYZ     T2
100003     HR Min Trans Amt     Minimum total transaction     T2
100004     Included Desk IDs     Minimum percentage at     T2
100001     All Currencies     This parameter allows coverage of all currency codes without     T1
100001     Excluded Cust IDS     Customer account IDs of The Firm     T1
100001     Excluded Trader IDS     Trader IDs of the Firm excluded     T1
100002     Short Sale Tim Window     Number of seconds prior to the     T1
100003     HR Min Trans Amount     Minimum total transaction     T1
100004     Incl Desk IDs     Minimum percentage at all level     T1
FLAG T1: shows the data from T1 table and T2 shows the data from T2 table.
Now created another two table with the interchange of flag they are T3 and T4
the table structure (T3) will be like:
ID     DPLY_NM     FLAG
100001     All Currencies     T2
100001     Excluded Cust IDs     T2
100001     Excluded Trader IDs     T2
100002     Short Sale Times Window     T2
100002     XYXZ     T2
100003     HR Min Trans Amt     T2
100004     Included Desk IDs     T2
and the table structure (T4) will be like:
ID     DPLY_NM     FLAG
100001     All Currencies     T1
100001     Excluded Cust IDS     T1
100001     Excluded Trader IDS     T1
100002     Short Sale Tim Window     T1
100003     HR Min Trans Amount     T1
100004     Incl Desk IDs     T1
Now i run the query giveb below and i got the appropriate record
(select * from MT
minus
select * from T3)
minus
select * from T4;
For finding the descrepancies in description make the two table T5 and T6 as given below
(I need descripencies in the DESC_TX only)
T5 Table structure
ID     DPLY_NM     DESC_TX     FLAG
100001     All Currencies     This parameter allows coverage of all currency codes without     T2
100001     Excluded Cust IDs     Customer account IDs of the Firm     T2
100001     Excluded Trader IDs     Trader IDs of the Firm excluded     T2
100002     Short Sale Times Window     Number of seconds prior to the     T2
100002     XYXZ     XYZ     T2
100003     HR Min Trans Amt     Minimum total transaction     T2
100004     Included Desk IDs     Minimum percentage at     T2
T6 Table structure
ID     DPLY_NM     DESC_TX     FLAG
100001     All Currencies     This parameter allows coverage of all currency codes without     T1
100001     Excluded Cust IDS     Customer account IDs of The Firm     T1
100001     Excluded Trader IDS     Trader IDs of the Firm excluded     T1
100002     Short Sale Tim Window     Number of seconds prior to the     T1
100003     HR Min Trans Amount     Minimum total transaction     T1
100004     Incl Desk IDs     Minimum percentage at all level     T1
Now i run the query given below but i am not getting the appropriated records. Ther are some false record.
(select * from MT
minus
select * from T5)
minus
select * from T6;
Thanks
Anand
Message was edited by:
user567015

Lemme get on the old soapbox.. yet again.. and give you my prepared speech about manners here... yet again..
<soapbox on>
Don't you think that you claiming that your problem is urgent is rude? Are you not saying by that, that other people who also have problems posted here, are less important than your so very special and urgent problem?
And what do you expect from professionals here, with paid jobs, spending their free time to help people like you?
Should they now jump to it, stop with their paid work, and solve your urgent problem for you? Is that not also just plain rude?
I suggest that you first learn some basic manners when using public forums like this. I for one has stopped helping posters who claim their problems as urgent and then demand special treatment in forums like this.
<soapbox off>

I need a few suggestions

Similar Messages

Maybe you are looking for