I need help in classical report

Dear all,
I want develop a classical report which provides custom format for reporting and audit the chromatography results based on the selection criteria specified for inspection lot number, material number, batch and etc..
Please can any one help me to develop this report.
Thanks & regards,
sujith
Moderator message : Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Aug 10, 2011 1:47 PM

My question is in the output.It suppose to be printed as a list but it just gave me one line , i mean how can i loop it .
i tried loop at <table> into <s.table> but it is not coming because the l y_ count is local.
Thanks.

Similar Messages

Need help on classical report

hi friends i need help on classical reports,
sold-party,
material
sales and distrubitutation channel ,division,
incoming orders,order number,invoice ,credit,
i need sub totals and final total of invoice and each customer should display in new page .

Hi
Use the Tables KNA1,VBAk,VBAP,VBRK and VBRP and design the report
see the sample report using KNA1,VBAK and VBAP.
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Reward points for useful Answers
Regards
Anji

Need help on Oracle Report format

Hi,
I need help on Oracle Reports. I am generating a report in excel sheet. I have a column which is 13 digit number (In database it is CHAR datatype). In excel sheet it showing some thing like 9.78381E+12. I want to show complete number like 9783805591331.
Also sometimes leading zero's are not showing when my column values is something like 0098794859583. I need to show the leading zero's as well in excel without losing them.
Below are the parameters i am using for the report
DESFORMAT=SPREADSHEET AND DESTYPE=FILE
My Oracle 9i developer version.
Any help on this would be much appreciated.
Thanks
Kishore

An additional quote string ' character with the number field will solve this problem but if u want to display this field in report then it will look ugly
'''||yourfield from table; check ur regional settings also
plz mark it helpful correct if it is

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

Need Help XML Publisher Report

Hi Friends
I need to generate a report in xml publisher responsibility .
I have create and designed the RTF file using word , And i have genetared an XML file(template )
I have some doubt please clarify by doubts
In RTF template i have some 4columns
For EXample i Give some column name
Invoice Number , Invoice Line Number ,Tax Type ,Tax Code Name etc....
In my RTF I have done like this
I have created two 2 row and 4column
In the 1st row i have all the 4 column heading
In the 2nd row i have done like this
Developer tab> Design mode > In the legacy tool i have selected text Form field
Once i double click the text form field in the default text i have Given C1 Then in the Add help text button i have given <?C_INVOICE_NUMBER?> like this i have done for alls the columns
My RTF design is completed
Now i need load the XML is it?
In the XMl data query i have placed my sql statement
Here my doubt starts
wether all the column in the RTF should be in the XML sql statement ha?
2)In the top of my RTF i need to add date and page No how to add that ?
Thanks In advance
AT

Hi Friend
Iam saying this is my XML file
<LIST_G_TAX_NAME>
<G_TAX_NAME>
<C_SORT_TAX_NAME>USE TAX</C_SORT_TAX_NAME>
<C_TAX_NAME>Use Tax</C_TAX_NAME>
<C_TAX_RATE>8.25</C_TAX_RATE>
<C_TAX_TYPE>USE</C_TAX_TYPE>
<C_PERIOD_NAME>OCT-11</C_PERIOD_NAME>
<LIST_G_VENDOR>
<G_VENDOR>
<C_SORT_VENDOR_NAME/>
<C_SORT_SITE_CODE/>
<C_VENDOR_ID>851</C_VENDOR_ID>
<C_VENDOR_NAME>ORACLE CORPORATION</C_VENDOR_NAME>
<C_SITE_CODE>CHICAGO</C_SITE_CODE>
<LIST_G_INVOICE>
<G_INVOICE>
<C_INVOICE_DATE>17-OCT-11</C_INVOICE_DATE>
<C_SORT_INVOICE_NUMBER>1308</C_SORT_INVOICE_NUMBER>
<C_INVOICE_ID>350889</C_INVOICE_ID>
<C_INVOICE_NUMBER>1308</C_INVOICE_NUMBER>
<C_INVOICE_LINE_NUMBER>1</C_INVOICE_LINE_NUMBER>
<C_PO_NUMBER>256388</C_PO_NUMBER>
<C_DESCRIPTION>TEST</C_DESCRIPTION>
<C_GL_DATE>17-OCT-11</C_GL_DATE>
<C_INVOICE_LINE_AMOUNT>15</C_INVOICE_LINE_AMOUNT>
<C_CHARGE_ACCOUNT>412.00.6410.7831.1076.1001.00.000.0000</C_CHARGE_ACCOUNT>
<C_LIABILITY_ACCOUNT>412.00.0000.2152.1208.1001.00.000.0000</C_LIABILITY_ACCOUNT>
<C_BATCH_NAME>101711</C_BATCH_NAME>
<C_SITE_CODE2>CHICAGO</C_SITE_CODE2>
<C_INVOICE_AMOUNT>15</C_INVOICE_AMOUNT>
<LIST_G_DIST>
<G_DIST>
<C_INVOICE_TAX_ID>10061</C_INVOICE_TAX_ID>
<C_LINE_TYPE>ITEM</C_LINE_TYPE>
</G_DIST>
</LIST_G_DIST>
<C_TAXABLE_AMOUNT>15</C_TAXABLE_AMOUNT>
<C_TAX_AMOUNT>1.24</C_TAX_AMOUNT>
<C_INVOICE_AMOUNT_DISP> 15.00 </C_INVOICE_AMOUNT_DISP>
<C_TAXABLE_AMOUNT_DISP> 15.00 </C_TAXABLE_AMOUNT_DISP>
<C_TAX_AMOUNT_DISP> 1.24 </C_TAX_AMOUNT_DISP>
</G_INVOICE>
</LIST_G_INVOICE>
<C_INVOICE_SITE_SUM>124.9</C_INVOICE_SITE_SUM>
<C_INVOICE_SITE_SUM_DISP> 124.90 </C_INVOICE_SITE_SUM_DISP>
<C_TAX_SITE_SUM>5.4</C_TAX_SITE_SUM>
<C_TAX_SITE_SUM_DISP> 5.40 </C_TAX_SITE_SUM_DISP>
<C_TAXABLE_SITE_SUM>65.66</C_TAXABLE_SITE_SUM>
<C_TAXABLE_SITE_SUM_DISP> 65.66 </C_TAXABLE_SITE_SUM_DISP>
</G_VENDOR>
</LIST_G_VENDOR>
<C_OLD_VENDOR_ID>0</C_OLD_VENDOR_ID>
<C_INVOICE_SUM>124.9</C_INVOICE_SUM>
<C_INVOICE_SUM_DISP> 124.90 </C_INVOICE_SUM_DISP>
<C_TAX_SUM>5.4</C_TAX_SUM>
<C_TAX_SUM_DISP> 5.40 </C_TAX_SUM_DISP>
<C_TAXABLE_SUM>65.66</C_TAXABLE_SUM>
<C_TAXABLE_SUM_DISP> 65.66 </C_TAXABLE_SUM_DISP>
</G_TAX_NAME>
</LIST_G_TAX_NAME>
And if i need all the column to be displayed in my report
1)Invoice Number
2)Invoice Line Number
3)Tax Type
4)Tax Code Name
5)Tax Rate Percent
6)Supplier Name
7)Description
8)Gl Date
9)Invoive Line Amount
10)Taxable Line Amount
11)Tax Liability
12)Po Number
13)Charge Account
14)Liability Account
Which tag do i need to use fro grouping
For ex
Instead of this <?for-each:G_TAX_NAME?> <?end for-each?>
which one i need to use
Please help
Thanks
AT

I need help putting Classical Music CDs into iTunes

I need help - this question has lots of subquestions, sorry.
I have found just a few discussions that deal with this but I am still confused. Forgive me if I get wordy and misuse technical terms - I am trying to learn this thing...
I'm an iPod newbie and haven't a clue on the best way to organize my many, many classical CDs that I'd like to put onto my iPod Classic 160G. I'd also like to do this with as little fussing around as possible since there are lots of CDs I've got to deal with.
If each CD is a separate entry [album?] in the playlist and titled with composer name first [ex Bach, Brandenburg Concertos, Titov conductor] I'll have several playlist entries with the same titles, but different contents. No problem really.
But, should I separate it further, by having each concerto [say] be a separate entry in the playlist - without having to download the CD again. [I've just practiced on a few CDs but I imagine it being a problem if I had to download each CD several times - once for each work] Does it make sense to leave gaps between movements? [I'm not finding a way to remove gaps, though I have seen that suggested somewhere]
And when I come to play the pieces, if I start playing a work in a playlist, will the iPod keep going from one movement to the next as it makes its way through the playlist - or will it stop at each movement and wait for me to tell it what to do next?
Advanced Settings - are these the best? I'll be listening to music on an airplane using noise cancelling headphones and at destination attaching iPod to portable speakers to listen to music in hotel rooms.
General: Keep iTunes Music folder organized - unchecked? [not sure what this means or does or doesn't do]
Copy files to iTunes Music folder when adding to library - checked?
Importing: AAC encoder? High quality -128 kbps?
Thanks for all your help - I know this is a multiple set of questions and perhaps should have been broken up...
Mrs H
Message was edited by: Mrs H to fix typos
Message was edited by: Mrs H

Thank you so much for your help. You have sorted out a lot of problems for me. I've tried to go through what you wrote, add some more info and I have asked a few more questions below-
I re-ripped at 256. I too have the 160GB classic so it's good to know that it will take 10,000 tracks as lossless - now I have to re-rip again! I actually hadn't anticipated using the iPod with anything other than our high quality noise canceling airplane headphones, our cheap, portable travel speakers for hotel rooms and our Cambridge sound speakers for our cabin. It's that last set of speakers that makes me think I should follow you advice and go with lossless.
QUESTION #1 - When I re-rip and do an automatic sync, will the tracks at 256 automatically be replaced by the bigger lossless ones with the same name or should I delete everything from the iPod and begin anew?
"I create a playlist for each work, using a systematic naming convention..." What I did on my test was create a playlist for each composer breaking it down - ex- Bach:concertos, Bach:sonatas, etc. I have the Album column highlighted and it appears as if the movements stay together in the correct order. I fear that the task might be too large to create a playlist for each work, though that certainly is appealing.
QUESTION #2 If the Album column is highlighted and the movements are in the correct order in iTunes in the playlist, will they stay that way in the iPod?
"I tend to use just surnames for composers for example, or at least "surname, firstname"." I finally found in settings on the iPod the way to change sort by composer to last name, first name. In iTunes, the composer column which is imported from the internet search for info on the CDs gives composer with first name first and I can't find a place in iTunes to reverse this. Typing it or erasing the first name will be a huge chore.
QUESTION #3 Is there a place in iTunes to change the order of the composers' name in the composer column?
"For compilations etc I still create one for the whole CD or box set"
I figured this out on my own before you corroborated my idea - I think I'm getting the hang of this...
"The option iTunes has to "organise your music" is a good one"
QUESTION #4 - are you referring to the preferences > advanced check box "Keep iTunes Music Folder Organized" ? If not, what are you referring to?
"I have my library in its own dedicated disk. Wherever you put it, its important to then never change it or doing anything else with it: leave it for iTunes."
QUESTION #5 "dedicated disk"? as in hard drive? I have been using SuperDuper to back up my Mac to an external HD; I plan to put a copy of the iTunes folder onto yet another HD where I keep copies of all our photos as well.
"never change it"? I noticed a misspelling "Haendel" from the on-line CD/track info - no problem in fixing that - right? Since you later say you do change info, what is it you are never changing?
QUESTION #6 - "Disk N of M capability" - what? Where do I find this option? And when you say "for multiple CD albums, don't include the cd number in the album name." Where? when you put the CD into a playlist entry? or just in the list of music in the album column - do you change the listing?
ONE FINAL QUESTION - when I turn on the iPod when it's not attached to headphones or speakers, and I'm just looking at the screen to see settings or how the syncing worked, the iPod appears to begin playing something as soon as I turn it on. THIS IS A STUPID QUESTION, but I can't find the answer, how to I get it to stop playing without turning the iPod itself off???
"I hope that helps a little. " A little?? It helps a lot - and I'll award those points as soon as I get it all resolved.
Thanks again,
Mrs H

Need help in dynamic report for a range of year and period

Dear all,
I need help in creating an ALV report with dynamic columns based on the Year and period entered on the selection screen. for example if in the year we enter 2002 and period range from 10 to 12 then we should get the 3 columns display for cost(example) for period 10/2002, 11/2002 and 12/2002.
Can anyone help me in achieving this dynamically since the user can enter the year also in intervals along with the period and data also needs to be populated in the corresponding columns.
An example code would be of great help.
Thanks,
Amit

Hi,
Use field symbols as follows.
TYPE-POOLS : SLIS.
TABLES : MARC,T001W.
DATA : BEGIN OF ITAB OCCURS 0,
       MATNR LIKE MARC-MATNR,
       END OF ITAB.
DATA : FIELDSTAB TYPE LVC_T_FCAT,
       STAB      TYPE LVC_S_FCAT,
       T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       S_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
       NEW_LINE TYPE REF TO DATA,
       NEW_TABLE TYPE REF TO DATA,
       INDEX(3) TYPE C,
       STR(70),
       TEXT(6),
       CNT(1),
       TEXT1(16),
       REPID LIKE SY-REPID.
FIELD-SYMBOLS : <FS> TYPE STANDARD TABLE,
                <WA> TYPE ANY.
SELECT-OPTIONS : S_WERKS FOR MARC-WERKS NO INTERVALS,
                 S_MATNR FOR MARC-MATNR NO INTERVALS.
INITIALIZATION.
REPID = SY-REPID.
START-OF-SELECTION.
SELECT * FROM MARC
           INTO CORRESPONDING FIELDS OF TABLE ITAB
           WHERE MATNR IN S_MATNR
           AND   WERKS IN S_WERKS.
SORT ITAB BY MATNR.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING MATNR.
STAB-FIELDNAME = 'MATNR'.
STAB-DATATYPE = 'CHAR'.
STAB-INTLEN    = '18'.
APPEND STAB TO FIELDSTAB.
CLEAR CNT.
LOOP AT S_WERKS.
    CLEAR TEXT.
    CNT = CNT + 1.
    CONCATENATE 'EISLO' CNT INTO TEXT.
    STAB-FIELDNAME = TEXT.
    STAB-DATATYPE = 'CHAR'.
    STAB-INTLEN    = '16'.
    APPEND STAB TO FIELDSTAB.
    CLEAR S_WERKS.
ENDLOOP.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = FIELDSTAB
    IMPORTING
      EP_TABLE        = NEW_TABLE.
ASSIGN NEW_TABLE->* TO <FS>.
CREATE DATA NEW_LINE LIKE LINE OF <FS>.
ASSIGN NEW_LINE->* TO <WA>.
PERFORM MOVE_DATA.
CLEAR S_FIELDCAT.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-TABNAME = ITAB.
S_FIELDCAT-SELTEXT_M = 'Part Number'.
S_FIELDCAT-NO_ZERO = 'X'.
S_FIELDCAT-DDICTXT   = 'M'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR CNT.
LOOP AT S_WERKS.
    CLEAR T001W.
    CNT = CNT + 1.
    SELECT SINGLE * FROM T001W WHERE WERKS = S_WERKS-LOW AND SPRAS = SY-LANGU.
    CLEAR TEXT.
    CONCATENATE 'EISLO' CNT INTO TEXT.
    S_FIELDCAT-FIELDNAME = TEXT.
    S_FIELDCAT-SELTEXT_M = T001W-NAME2.
S_FIELDCAT-NO_ZERO = 'X'.
    S_FIELDCAT-DDICTXT   = 'M'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    CLEAR S_WERKS.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      IT_FIELDCAT = T_FIELDCAT[]
    TABLES
      T_OUTTAB    = <FS>.
*&      Form MOVE_DATA
      text
FORM MOVE_DATA.
LOOP AT ITAB.
    CLEAR STR.
    CONCATENATE ITAB-MATNR ' ' INTO STR SEPARATED BY SPACE.
    LOOP AT S_WERKS.
      CLEAR MARC.
      SELECT SINGLE * FROM MARC WHERE MATNR = ITAB-MATNR AND WERKS = S_WERKS-LOW.
      IF SY-SUBRC EQ 0.
        CLEAR TEXT1.
        TEXT1 = MARC-EISLO.
        CONCATENATE STR TEXT1 INTO STR SEPARATED BY SPACE.
      ELSE.
        CONCATENATE STR '0' INTO STR SEPARATED BY SPACE.
      ENDIF.
    ENDLOOP.
    <WA> = STR.
    APPEND <WA> TO <FS>.
    CLEAR ITAB.
ENDLOOP.
ENDFORM.                    "MOVE_DATA
Reward points if helpful.
Regards,
Sankar..

Help regarding classical report

i want help reltated to classical report..
1 . i want to bold text for some lines ..how can i do it...plz tell me..
2 . when i m printing classical report then in the printed page it show date and description of program but i want to hide it. plz help me .
i m new in abap . thanks in advance..

Hi,
Changing font size in reports refer program DD_STYLE_TABLE.
use NO STANDARD PAGE HEADING to hide description of program.
Regards,
Anil

I need help in Custom Reporting

Hi,
i need help in auditing, SCOM 2012 R2 is deployed in 2 servers with ACS, i have 2 file server that has some shared folder in which users work on some certain document i need to have a report that i can run on certain file that will show me who access that
file when he access what he did like (read write, delete). i don't think we have this type of capability in default report. let me know if someone can help me in that. (free/paid) i know its a bit customized. let me know if u need any more info.
Syed Kasif

Hi,
As far as I know, to audit file access, we should Enable Audit Policy, and then Set up Audit System Access Control List (SACL).
After that, we can make sure that under security event logs there are auditing logs for file access.
Please refer to the below link for more details about auditing file access on file server:
http://blogs.technet.com/b/mspfe/archive/2013/08/27/auditing-file-access-on-file-servers.aspx
And for Collecting Security Events Using Audit Collection Services in Operations Manager:
http://technet.microsoft.com/en-us/library/hh212908.aspx
Regards,
Yan Li
Regards, Yan Li

Need Help on calling report in OAF Page

Hi,
At present i am wokring EAM Module. Here i need to call one report.
In my OAF Page one button is there("The name of the button is *Issue*"). After clicking this button i need to fire one report(The name of the report is "Maintenance Picking Slip Issued Report").
Please help me how to call report? I don't have any idea how to proceed for this.please explain clearly.
Thanks in advance..
Thanks,
Somasekhar.

Somasekhar,
you want to call PLSQL Report or XML Publisher report or you want to submit the concurrent request.
If this XML Publisher report then refer following code for your refrence
public BlobDomain getXMLData(String as[], String s, String s1, String s2, String s3, String s4, String s5,
String s6, String s7, String s8, String s9, String s10)
throws Throwable
int i;
int j;
int k;
int l;
int i1;
int j1;
int k1;
int l1;
int i2;
int j2;
int k2;
OracleCallableStatement oraclecallablestatement;
ARRAY array;
int ai[] = new int[as.length];
i = 0;
j = 0;
k = 0;
l = 0;
i1 = 0;
j1 = 0;
k1 = 0;
l1 = 0;
i2 = 0;
j2 = 0;
k2 = 0;
for(int l2 = 0; l2 < as.length; l2++)
ai[l2] = Integer.parseInt(as[l2]);
if(s.equals("Y"))
i = 1;
if(s1.equals("Y"))
j = 1;
if(s2.equals("Y"))
k = 1;
if(s3.equals("Y"))
l = 1;
if(s4.equals("Y"))
i1 = 1;
if(s5.equals("Y"))
j1 = 1;
if(s6.equals("Y"))
k1 = 1;
if(s7.equals("Y"))
l1 = 1;
if(s8.equals("Y"))
j2 = 1;
if(s10.equals("Y"))
k2 = 1;
i2 = Integer.parseInt(s9);
DBTransaction dbtransaction = getDBTransaction();
String s11 = "BEGIN :1 :=EAM_WorkOrderRep_PVT.getWoReportXML(:2, :3, :4, :5, :6, :7, :8, :9,:10,:11,:12,:13); END;";
oraclecallablestatement = (OracleCallableStatement)dbtransaction.createCallableStatement(s11, 1);
java.sql.Connection connection = oraclecallablestatement.getConnection();
ArrayDescriptor arraydescriptor = ArrayDescriptor.createDescriptor("SYSTEM.EAM_WIPID_TAB_TYPE", connection);
array = new ARRAY(arraydescriptor, connection, ai);
BlobDomain blobdomain;
oraclecallablestatement.registerOutParameter(1, 2005);
oraclecallablestatement.setArray(2, array);
oraclecallablestatement.setInt(3, i);
oraclecallablestatement.setInt(4, j);
oraclecallablestatement.setInt(5, k);
oraclecallablestatement.setInt(6, l);
oraclecallablestatement.setInt(7, k1);
oraclecallablestatement.setInt(8, l1);
oraclecallablestatement.setInt(10, i1);
oraclecallablestatement.setInt(11, j1);
oraclecallablestatement.setInt(9, j2);
oraclecallablestatement.setInt(12, i2);
oraclecallablestatement.setInt(13, k2);
oraclecallablestatement.execute();
CLOB clob = ((OracleCallableStatement)oraclecallablestatement).getCLOB(1);
blobdomain = new BlobDomain();
OutputStream outputstream = blobdomain.getBinaryOutputStream();
long l3 = clob.length();
byte abyte0[] = new byte[(int)l3];
String s12 = clob.getSubString(1L, (int)l3);
abyte0 = s12.getBytes("UTF-8");
outputstream.write(abyte0);
outputstream.close();
return blobdomain;
SQLException sqlexception;
sqlexception;
try
oraclecallablestatement.close();
catch(Exception exception) { }
throw OAException.wrapperException(sqlexception);
public void initSearchCriteria()
log(this, "init search crieria", 1);
getWorkPlanSearchCriteriaVO().executeQuery();
Let me know you got your point or not.
Thanks,
Kumar

Help for classic report?

Hi.
I want to create a classic report which have some editable columns (text fields etc.). So after editing, with the help of a save button, user could save new values to db.
I made a search in web but can't find anything like this.

79b57e45-d497-4042-a537-ff0cf7490939 wrote:
Please update your forum profile with a real handle instead of "79b57e45-d497-4042-a537-ff0cf7490939".
I want to create a classic report which have some editable columns (text fields etc.). So after editing, with the help of a save button, user could save new values to db.
I made a search in web but can't find anything like this.
This is covered in the APEX documentation under the subject of tabular forms.They are a bad idea, especially for new APEX users.

Need help to create report with jpeg/gif image

Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
John

Hi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John

Need help with Classic and OS 9.

I have searched on this issue and while I found a lot of posts I am still unsure what to do.
I just purchased some software that says it can be used on OS 8, 9 or X.
I have a G5 iMac running 10.4.3 and my wife has a G4 iBook running 10.3.9. Neither of us have ever used anything that has needed Classic before.
When we try to install the software we get a message that says:
"Classic cannot find a Mac OS 9 system folder on the startup disk to use."
I am confued that I get this message since the software package says OS X.
I assume this means that I need to install classic on our machines. Since she has Panther I believe there is Classic on her start-up disks but I have no idea how to use them or where to start. Some of the things I read says that I need to uninstall Panther or Tiger to install Classic.
For me (using Tiger) I don't think I have Classic on my disks. Can I use her disks to load Classic on my machine? Also, in looking at some Apple documents I found something called Software Restore.dmg that I downloaded to my machine but again, I don't know what to do with it. Does this contain Classic?
I have an external drive attached to my network via Ethernet and mounted on our desktops. I can't boot from it but can I load Classic onto that drive and just run it like an application?
Does classic take up a lot of space on the hard drive?
As you may have guessed, I am not that familiar with how to handle this and would appreciate any and all direction. If I have left out any critical information please let me know and I will post additional info. as needed.
Thanks.
David

Joe:
Thanks for the prompt reply. In looking at my install Disc 2 I found that I could install the OS 9 package and I got the software to run. Thanks.
As it turns out, all the software that I purchased did was install a bunch of Word and Excel templates onto my computer via Classic. I don't actually need the application any longer to use these templates going forward so my next question is;
How do I uninstall OS9 from my computer?
It appears I have several new folders in my Mac HD in Finder. They are:
Application (Mac OS9)
Desktop Folder (this is empty)
System Folder (the contents are about Classic and Classic Support etc.)
Would I just drag them to the trash to uninstall OS9? Are there any preference files I should delete?
Or am I best to just leave this in my system for possible future use? Having recently converted from Windows I am still of the mindset that I need to get off anything I don't really need or use.
Thanks again,
David

Need help with simple report built in CR in Eclipse

I'm using the Java SDK in Eclipse to be able to leverage a function that does not appear to be native in Crystal Reports - auto refresh. Looking at the SDK, it appears straight forward to create a viewer on an existing report (built via Crystal Reports) and then refresh the data in a loop. First glance at the SDK it appeared CrystalReportViewer would be the right class, but I didn't find that in the CR Java Runtime Library that comes with cr4e download. So, I used ReportViewerBean, at least to prove out the concept. Here's the prototype code (high-level), using the bean:
public static void main (...) throws ReportSDKException
     ReportViewerBean viewer = new ReportViewerBean();
     viewer.setReportSource(path to the .rpt file);
     viewer.init();
     viewer.start();
     while (...) {
          viewer.refreshReport();
What else is needed to display the report?
Thanks,
Roger

I'm using the Java SDK in Eclipse to be able to leverage a function that does not appear to be native in Crystal Reports - auto refresh. Looking at the SDK, it appears straight forward to create a viewer on an existing report (built via Crystal Reports) and then refresh the data in a loop. First glance at the SDK it appeared CrystalReportViewer would be the right class, but I didn't find that in the CR Java Runtime Library that comes with cr4e download. So, I used ReportViewerBean, at least to prove out the concept. Here's the prototype code (high-level), using the bean:
public static void main (...) throws ReportSDKException
     ReportViewerBean viewer = new ReportViewerBean();
     viewer.setReportSource(path to the .rpt file);
     viewer.init();
     viewer.start();
     while (...) {
          viewer.refreshReport();
What else is needed to display the report?
Thanks,
Roger

Need help to develop report with column chart

Hi
I am new to SAP BO world.Could anyone please help me to design report with column chart.Please guide me how to develop report for the following requirement.I am not aware of variance columns and variance labels.Please provide some guidance or some tutorials(for column Chart) so that I can complete the task. Please reply me as soon as possible.Waiting for reply.Thanks in advance.
Type: Column Chart
u2022     Rows: Banking Asset Margin (%)
u2022     Start / End Columns: PY YTD Act(Prior year year to date); CY YTD Act(Current year Year to date)
u2022     Variance Columns: # Var (CY-PY Act) for GOLM; Volume; Rate; Non Banking NII; Banking Volatility in NII; Banking Volatility in OOI; Fees/One Offs/Other; Volatile Items; Sophie
u2022     Sub-total columns: PY YTD Underlying; CY YTD Underlying.
u2022     Variance Labels: % Var (CY-PY Act) for Total Income and Underlying Income
u2022     Sub-Total Labels: # Var (CY-PY Act) for Net Insurance Income; Banking Volatility; Other Operating Income
Additional information
u2022     Variance columns (bar) colours: Red = Adverse to Prior Year; Green = Favourable to Prior Year
u2022     Columns to show values. Adverse values to be shown in red text in brackets. Favourable results in black text.
u2022     All values in Black, but adverse to be shown below the bar.

Hi,
This type of question is almost impossible to answer over a forum .
You need to work with your business to understand what these requirements mean in terms of data modelling and relationships between object entities.
- Some of these metrics should be delegated to source, and calculated in the update routines to your datatargets (aka Cubes/Tables)
- Others could be resolved in the semantic layer (Universe)
- Other will be calculated in the presentation layer as local formulae or variables.
whilst BusinessObjects is a fairly intuitive tool, it may be unreasonble to expect a new learner to deliver an advanced report with conditional formatting.
Regards,
H

I need help in classical report

Similar Messages

Maybe you are looking for