I need help... lot's of it

My entire family has regular iPods, I have a nano... all the iPod accessories we have were bought before the nano came out. Will they work with my nano, or make it explode (or something else equally scary)? (Ex: we have this speaker thingy that let's us play music from the rest of my family's iPods, in living room, or whereever during parties and stuff. It was bought before the nano was even thought of probably, will it make it explode? 'Cause my dad thinks so)

Not true.
I put my nano in my Altec Lansing speakers and they just work.
The only thing is that the nano is a lot smaller than my iPod so it doesn't fit so snugly.
Happy New Year
Colin R.
p.s. If your older kit uses FireWire note that it can only be used for charging the nano, it will not sync anything to the nano. Apple took the FireWire chip off the nano to keep it so small.

Similar Messages

Need help, lots of assets, low scores

in 2008 I blew up like a lot of people. EQ score bounces between 660 and 720. 9 derogs, all are over 5 years old, next year most will drop off. I blew up my Amex platinum card, settled for less than the amount owed. However, I have rebuilt myassets, I have $600k cash at Bof A, and another 3 million in stock. I paid cash for my new cars, I only owe $250k on my house. Amex won't drop for over 1 year but how can I get back in good graces with them. Has anyone had success in contacting them and providing proof of assets, etc and have it work? Any other ideas?

Our situations are identical! Oh yeah, except for the assets of course. My Amex went south in 2008 and I reached a settlement for less directly with them, with 12 payments, IIRC. I am planning to apply for just the green Amex charge card. When I go to the Amex prequal site, it shows I am prequal for the three charge cards and it doesnt display any credit cards at all. I have also received prequal letters in the mail for the charge cards. Thinking back on 2000, I did get the Amex charge card first and they sent a prequal for the Blue Cash about a year later. I am going to try the same method again. hth

I had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded..., i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded... I need a lot of help please.

i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please

Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

I have I pad one use iOS 5.1.1 i want update to iOS 8 itry a lot time but no possible i need help how ican doit

I have I pad one use iOS 5.1.1 i want update to iOS 8 itry a lot time but no possible i need help how ican doit.

The iPad 1 can not be upgraded beyond 5.1.1.

Hi i got the new ipod 5th generation and the new lifeproof case. its a lot different than what i expected. i really need help on how to put on the cover. i feel like if i dont put it on a certain way or its off by a little my device will break

i need help with my new lifeproof case

The instructions below may help.
http://www.lifeproof.com/en/support/products/ipod/user-guide/

Need flex time help, lots of songs, lots of BPM's multiple tempos

Newbie here, trying to finally make the switch from Pro Tolls to Logic and flex time really sold me but I'm having some growing pains that I need to speed up for my current project.
I have about 20 songs that I need to:
first, find the bpm for each (quickly)
second, be able to mark them in a way that the bpm for each song would change to match the tempo track (which will fluctuate through out the editing process)
third, some how still have control of the anchor point in flex time which seems to get locked
In the end I am trying to create a remix of multiple songs that start off with different bpm's and fluctuating tempo.
I am able to do most of this but I think I am missing some steps, or perhaps the order of steps, that would make this process go much faster. I have worked other programs such as Ableton Live and elastic time in Pro Tools and at times it seems I can handle whole songs better in those programs than in Logic but I'm sure it more user error than the actual program.
I welcome any and all suggestions. Thanks.

Received this advice and responded on another forum but still need help.
Thanks for the response!
Had a few problems trying your suggestions.
*"Finding BPM: select the audio region and choose from the local Arrange area menu: Audio > Detect Tempo."*
Since it is a whole song and not just a part, such as drums, with well defined transients, it either can't detect the tempo or when it does it is wrong.
*"Make it follow the tempo track: Use Flex Time (in the track parameters, choose a Flex mode). "*
This would be fine if I didn't have to redefine all the transient markers as correct flex markers. Since Flex Time has problems defining the correct transient markers for complete songs it can be very time consuming.
Maybe I'm still missing something?
*"Third: what anchor? Do you mean the transient? Or the flex markers? You can move the transients in the Sample editor, and the Flex markers right on the track in Flex view (Click the Flex button in your toolbar)."*
The audio region anchor in the sample edit window, the orange arrow. I think this is some how turned off after turning on flex time and I am unable to move it. I use this to line up the first beat if there is something before the music starts, such as someone speaking or a lead in with a different tempo than the song tempo, that I would still like to keep. That way I can move the region in the arrange window and it will line up according to the first beat and not the beginning of the region. Am I making any sense?

Need Help in opening a Link or URL

Hi,
I need help in opening a URL (on the same server where CLM application is deployed). I have added a Button on ToolBar and added the code. but it's not working. the same java program is working on my local system. below is the code.
import java.io.*;
import java.util.*;
public class FileOpen
       public static void main(String[] args)
             FileOpen deleteList = new FileOpen();
             String url="http://www.google.com/";
               try {
                    String[] cmd = new String[4];
                    cmd[0] = "cmd.exe";
                    cmd[1] = "/C";
                    cmd[2] = "start";
                    cmd[3] = "c:
amd_SCCMLog.txt";
                    System.out.println(" cmd"+cmd);
                    Process p = Runtime.getRuntime().exec(cmd);
                    System.out.println(" cmd1"+cmd);
                    Process process = Runtime.getRuntime().exec("notepad");
                    System.out.println(" cmd2"+cmd);
                    } catch (IOException ioe)
                         ioe.printStackTrace();
             //System.out.println("Memberfarm: " + memberFarm);
Regards,
Puneet Aggarwal

Hi Puneet,
What exactly are you trying to do? Can you describe where in the system you are doing it? There are different options....
What about a document report with a link to the Web site URL you want to open?
What about a read-only URL field on the document, populated with the URL you want to open?
What about the desktop links channel?
Lots of different ways to skin that cat (sorry cat lovers) ..your code looks like it might be the most difficult approach.
-Howie Wexler
www.craftysystems.com

Need help in making a USGA handicapping spreadsheet for my golf group. Anybody done this?

Need help in developing a spreadsheet for my golf group using the USGA system for handicapping? Has anybody done this?

Hi Jim, if you google "golf handicapping speadsheet" you will find a lot of entries; you will find probably a solution already done.

Need help in creating a 16gray levels 4 bit IndexColorModel.

Hi ppl,
Really need help with the above mentioned. I have reduced a 256 gray level .PGM image to 16 gray level (not using JAI). However, I'm having lots of trouble trying to create the image. It always comes out too dark. Does anyone know what the problem may be? Could it be that I'm using the wrong ColorModel?
Am currently using the follow code
static {
grayPallete1=new byte[16] ;
for(int i=0; i<16; i++) grayPallete1=(byte)i ;
public ImageData(byte[] pmap, int r, int c){
bpels = pmap ; irow=r; icol=c;
     int i = 0;
     clrmdl= new IndexColorModel(4,16,grayPallete1,grayPallete1,grayPallete1) ;
Any help is greatly appreciated!
Rgds,
Dam
Message was edited by:
Damy
Message was edited by:
Damy

Hi Suman Sarkar,
I am a little confused about the layout of your waterfall chart, could you please post some dummy chart here, with a clear
understanding with the issue, we could give some solution or workarounds, the steps of uploading the picture are following:
1.
Upload the picture to a website
http://skydriver.live.com
2.
View the picture in the website.
3.
Right-click the picture, and then select “Copy”
4.
In reply window, select “Paste” to paste the picture into a post.
If you have any question about the steps, please feel free to ask.
Regards,
Challen Fu

I need help switching back to iPhoto

In February of this year I switched from iPhoto to Aperture for very specific reasons. My laptop's hard drive was running out of space, as it was housing my photo library that was quickly approaching 25,000 photos and pushing about 30 Gigabytes, and I wanted to take advantage of Aperture's ability to store photo masters on an external drive.
So why switch back? When I described why I had switched and my experiences doing so back in February I had said that I ran into many problems all of which I was able to solve save two:
"The two things I have yet to solve, which are rather large things: 1) Spotlight can no longer find my photos since switching to [edit: from] iPhoto. I am really not sure where to start with fixing this so I think I’m just going to have to ask someone. 2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'. When I try to access the keywords that are “below” iPhoto Aperture freezes. Perhaps I have too many keywords (I do have an awful lot). I’m not sure how to solve this one yet either. Maybe there is a raw .plist file that I can manually edit (and I am willing to do so)." -- Me.
After using Aperture for the past 3+ months I've yet to resolve either of these issues. Recently there was an update to Aperture from Apple that, according to the documentation for the update, was supposed to help resolve my second issue with having too many keywords for Aperture to handle - but it hasn't helped much. So since switching to Aperture I've not tagged more than maybe fifty photos, which is discouraging because I know that once I switch back to iPhoto I'm going to be busy tagging photos again.
So I suppose you could say I'm switching back for two main reasons. First, I want it to be much easier to tag my photos since that is probably the single most important thing to me and the experience with iPhoto and Keyword Manager ( http://www.bullstorm.se/KeywordManager.php ) is far superior to that of using keywords in Aperture. Second, I want my photos to start showing up in Spotlight searches again. I'm more than willing to deal with the caveat, albeit a rather large one, that I won't have my photos with me wherever I go anywhere but that they'll forever reside on my firewire drive.
What I need help with...
When I open iPhoto I see all of the previews for the photos that I had the day I switched to Aperture. However, the originals have been moved by Aperture onto my firewire drive - so when I click on each photo all I get is a ( ! ) symbol. The previews still reference a file that does not exist yet the iPhoto database still retains all of the relevant metadata (date/time, keywords, comments, etc) that I had worked so hard to put into iPhoto. I need to retain this information and somehow get the originals back into place so that iPhoto sees them again.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be. 2) Move the entire library to my external firewire drive. 3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
Since I have Aperture store my photos by date - importing only the images that I've imported into Aperture should be a piece of cake. I do not need to retain any metadata from Aperture since I've only tagged a few photos in Aperture and all of the other information I may need should be on the original file (like date taken, etc.). I know I'm going to lose a lot of edits that I've done like cropping, rotating, color balancing, red-eye reduction, etc. but I'm more than willing to lose all of that if it means that I can pick up where I left off and get back into the swing of things in iPhoto.
I've Googled like crazy and haven't found someone doing exactly what I'm trying to accomplish so any help with my current situation is greatly appreciated. I've also posted this on my blog http://cdevroe.com/notes/back-to-iphoto/

cvdevroe
2) Reorganizing my keywords in Aperture (since I had them set up in iPhoto) is impossible. When I bring up the Keywords HUD, I’m greeted with all of my keywords residing subordinately to a master keyword of 'iPhoto'.
Bear with me, my terminology may not be right. I'm heading in the opposite direction, and one of the advantages i see to Aperture is that I've got the same advantages in Keyword management as I have with KM in iPhoto.
Have you tried re-organising them using the control bar: Below the thumbs there's a drop down menu, by default it shows Photo Descriptors. Click on it and Select 'Edit Buttons'. You can merrily re-organise your Keywords in this window, and even have your changes reflected in live in the HUD.
As to the Spotlight searching, I'm afraid someone else will need to help on that one. Personally - and it's a regular on the iPhoto forums - I've never had much luck getting Spotlight to search within iPhoto for keywords, apart, of course, from using the search window in the iPhoto Window. I suspect a system-based search of iPhoto keywords is simply not possible.
What I thought about doing was this: 1) Somehow restore the originals for the almost 25,000 photos into the place where iPhoto thinks they should be.
That will work, but they'll need to be exactly as they were.
2) Move the entire library to my external firewire drive.
Easily done, after you've copied it over launch iPhoto holding down the option (or alt) key and choose 'Locate'. Navigate to the new location and that''ll be your default iPhoto Library Folder thereafter.
3) Import the remaining images that I've taken since switching to Aperture into iPhoto.
That should work too.
But the key is, can you return the iPhoto Library Folder exactly as it was, otherwise you'll need to create and populate a new library - and that will inevitable mean losing your keywords in iPhoto too.
FWIW, I need to keep iPhoto going for others in the household who are daunted by Aperture. My solution is a referenced library pointing towards the iPhoto Library Folder / Originals folder.
Regards
TD

I need help understanding how the Apple components integrate to create a system across all my devices?

I need help understanding how the Apple components connect to create a whole system across all my devices?
Is there a resource that describes current system and associated functionality?
For example:
Buy A, B, C to achieve "X"
You will need:
an internet provider which supports <specs>
add D to achieve "Y"
You will need:
an internet provider which supports <specs>
add "E" to achieve "Z"
You will need:
an internet provider which supports <specs>
For example, I am looking at the Gen 6 Airport extreme. For intended performance do I need broadband? if so what are the specs, or will basic internet service suffice? Do I need the internet provider's modem or does the Airport extreme replace that? And then I think, if I am doing this, I should also look at Apple TV....What do I need and Why? Then I look at the New Desk top coming out in the fall, and I think well, if I wait and get this, what does this component do for the system, and what becomes redundant? What does this awesome desktop do for my ability to sit and use a new macbook air when I travel or sit on the couch in my PJs?
If there was a place that plainly stated "if you buy the new dektop you can configure a system including only these components and achieve <this result> and by adding <additional components> you will achieve this result.
I have been to the genius store a few times, but I come out of there more confused unless I have SPECIFIC questions or already know what to buy.
A "System Configuration App" would be a really great sales tool--Just saying.

I have no idea what "fully optimized" means.
No Apple device will let you watch broadcast TV. The Apple TV is a good option for watching streaming TV from iTunes, NetFlix and Hulu. If you want to watch from other sources, you may need to look at other devices.
Any Mac computer or iPad will allow you to surf the web.
What business software?
Time Capsule is a good option for back ups.
Update what across all devices?
For accessing documents from all devices, a service like Dropbox is your best bet.
I have no idea what "step as far away from an internet provider as possible" means. If you want Internet access, you need an Internet provider.
Lighting fast speed for what? Processor? The specs are listed for all devices in the Online Store. Internet? We're back to the service provider.
Technology changes. The only way to keep pace with it beyond a couple of years is to buy new stuff.
The bottom line is you need to look at the specs for devices availble and at your budget and decide what best meets your needs. If you are unable to do that on your own, there are lot of technology consultants out there who will, for a fee, look at your exact situation, make recommendations and even handle the purchase and set up. Perhaps that would be the best route for you.
Best of luck.

I need help setting up my Apple wireless network so that there are no conflicts with IP addresses for any of my devices.

I have 2 Airport Extreme Base Stations, 1 is a 5th generation 802.11n and 1 is a 2nd generation 802.11n. I have 2 Extreme Express Base Stations which are 2nd generation 802.11a/n. The idea is to create a network that works throughout my 2 story house and extend into the garage. It's not a large house 1400 sq ft wood construction. The internet feed comes into the Hughes Net modem upstairs. This is where I want the main base station (5th generation). I eventually will connect a network drive and printer to it. I then want to place the second base station in the room directly under the upstairs room where the main base station is and connect my desk top computer to it. In the living room I will have one of the Express Base Stations connected to the Micro Cell and house stereo system. In the garage (50' away from the living room Express Station & 75' from the Main Base Station) I will place the other Extreme Express Base Station to be connected to the garage stereo system. All of this is with the idea to extend the range of my network for all my devices and airplay to my stereo systems.
Ok, so I have a lot of wireless devices. 2 2nd geneartion iPads, 2 iPhone 4s's, 3 Wi-Fi enabled Sony TVs, Apple TV (near the house stereo Extreme Express), AT&T Micro Cell connected to house stereo Extreme Express, Lorex Security DVR system (connected to main base station upstairs), Whole-House DTV Network system,1 Macintosh Quicksilver Desktop computer, 1 MacBook Pro, and 1 Mac AirBook. As you can see I need a lot of DHCP IP addresses.
So, how do I go about setting this all up? I have read countless articles and discussions but I still have conflicts. It usually mostly, but not limited to, effects my wife's AirBook. Not good at all! I used to have a WDS setup but I understand that the 802.11n Airport Extreme's do not support this. And when I try to distribute a range of IP addresses I run into problems. So can someone please help me resolve this headache?

Configure the Extreme connected to the Hughes Net modem as your router. In other words in AirPort Utility, Network tab > Router Mode should be set to "DHCP and NAT". It will provide IP addresses to all the devices on your network.
All other AirPort devices on your network should be configured as bridges: Router Mode "Off".
You may want to configure static IP addresses for any equipment that is likely to be permanently installed. For them, there is no reason to have the Extreme issue an IP address, and they can keep the same one forever.
The Microcell may be able to connect to the Express's LAN port such devices that have to handle voice or other real time audio or video streaming are generally best installed using a strictly wired connection. The same applies to the Sony TV and AppleTV. Keep them on a wired LAN served by the Extreme, avoiding any reliance on a wireless link if at all possible.
The way to implement a complex network like yours is to add one device at a time. Ensure it connects reliably, then add another. You have a lot of work to do.
WDS can be implemented even with new Extremes but its performance is likely to be so unacceptable that it would be nothing more than an exercise in frustration for you.

I get error 0x80073cf9 now and I need help to FIX Windows Store can't update any Apps & can't install any Apps now?

Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now.   This has been going on since April and May and its driving me crazy!    And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems.   I have read so many how to fix this error code but nothing works! :-(     I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes.   And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code?   And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?

Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.

Hi need help on getting customer open items

hi all,
i need help regarding getting open items for customers in the previous
ie. if i give current date,
i want to get the open items for past 30 days from current date
help me to get this ...
thanks a lot
regards,
selvi

or else ,
use table BSID.
Regards
Peram

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

Need help with inverter program

I am very new to labview and I need a lot of help fast. I have been given this vi program, which I have attached, that operates a bunch of inverters. The program is driving the inverter which in turn drives the agitator on a washing machine. The agitator goes in forward and reverse direction as a result of a relay within the inverter being supplied voltage to make it open and close. I need to supply voltage to the relay to make it go forward, reverse, and the pause before the next cycle begins. The current program has it doing a forward reverse and then immediately starts the next cycle. If any one can take a look at this program and let me know, first of all what the heck is going on, and second how to fix my problem, that would be incredibly helpful to me. If anyone has trouble opening the file let me know, I think attaching the vi should work but it may also look for a dll file or something when trying to open. Email me if you cannot open the file and I will send you the dll file as well. Your help is greatly appreciated. Thank you very much.
Tony
Attachments:
main2.vi ‏162 KB

Hello Tony,
you programmed it to run continously...
After the timed while loop runs through your array of ramp values you start again at index 0 (upper shift register). Instead of this end this while loop by combining the output from the comparison with your stop2 button (end loop when stop2 OR end of arrray). Now it will work.
Btw. why do you use "Insert to Array" when you want to concat 3 arrays (sequence frame 0)? Just use a "Build Array" and set "Concat Inputs" via mouse right-click.
Best regards,
GerdW
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I need help... lot's of it

Similar Messages

Maybe you are looking for