FBRA: resetting not possible

Hi,
in transaction FBRA ( resetting of cleared items ) it is normally possible to choose between only resetting and Resetting and revers.
In some situations it occurs that the Only resetting option is not available. Any hints on what might be the cause for this ?
Thanks in advance,
Rolf

I know there are two transactions for this.
FBRA is for resetting and reversing cleared documents
FB08 is for reversing documents
If the document is just a FB01/FB50 posting, they can be reversed using FB08, but cannot be reset and reversed using FBRA.

Similar Messages

How can I protect my information if factory reset not possible?

My iPhone 4 drowned and is clinically dead. I cannot, therefore, do a factory reset to protect my information.
Is anyone able to access my information if the phone cannot be turned on?
Is there anything else i can do before disposing of the phone to protect my information?

With iOS 5 installed you should be able to do future updates directly on the device via Settings > General > Software Update.
If you do an update via your computer's iTunes then you can force a backup by right-clicking the iPhone 'device' in iTunes and selecting backup. You should also copy any purchases off the iPhone to your computer's iTunes via File > Transfer Purchases, and copy off any important documents, files, notes etc (e.g. by email, the file sharing section at the bottom of the Apps tab in iTunes, wifi, whatever the apps that you use support) - the update process should backup and restore the content but it's best to be safe.

Resetting this reverse document is not possible - FBRA

Hi,
I'm trying to reset the cleared items with Tcode FBRA also system is throwing error like below
==================================================================================================
Resetting this reverse document is not possible
Message no. F5579
*Diagnosis
The system required a reverse document to be created after resetting a clearing procedure as otherwise documents would have been generated in the system which could not have been processed correctly. The following cases require the clearing document to be reversed:*
Exchange rate differences were posted.
=================================================================================================
the document has items of exchange rate differences, but,
Question: The exchange rate difference it's related with t-code fagl_fc_val ???l

Hi,
Reverse the document using FB08 and input the reversal document no in the reset transaction FBRA.
Hope it works.
~Andrew

FBRA-Document includes already cleared items - reversal not possible

While reset and reversal using FBRA I am getting the following error. Please do let me know if any clue to resolve this issue.
Document includes already cleared items - reversal not possible
Message no. F5 308
Diagnosis
A reverse posting clears all line items that are managed as open items. This is not possible if one of the items in question has already been cleared by another method.
System Response
Error message.
Procedure
If you really want to reverse the document with the number you specified, display the cleared items and reset all those items for which you can find clearing document numbers. Then repeat the reverse transaction.

Hi Dewang,
Thanks for your quick responce.
step 01- Posted Customer Invoice on 01-Jan-2011with RV doc with Rs-1200: Doc 111111
Step 02- Posted Customer downpayment on 01-Jan-2011 with DZ doc with Rs-1200: Doc No 2222222
Step 03- Clear Customer line items on 10-Jan-2011 with AB doc with Doc no- 3333333
Trying to reverse Cleared Item (i.e. Doc No 3333333) with T-Code FBRA. While doing Reset and reversal we are getting the above problem.
Please let me know if you need any information.
Regards
Raj

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

See if this helps : http://support.apple.com/kb/TS3694#error3194

When I am attempting to reset my password that has been forgotten through a computer restore, iTunes gives me a prompt to turn off Find my iPad in iCloud settings. This is not possible, as my iPad mini is locked and settings are unaccessible.

When attempting to reset my iPad mini password that has been forgotten, I am unable to restore my device due to an error message stating that I "Need to turn off Find My iPad in iCloud settings on my iPad mini". This is not possible, as I have forgotten the password and can not open the device.

Hi there dsbrooks911,
You may find the information in the article below helpful.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
-Griff W.

Apple TV 2 reset and update to iOS 5 not possible

I can't upgrade my ATV 2 to iOS 5.0.
I tried both ways described at support.apple.com. At ATV a message says it is not possible.... try again later.
When I connect ATV with a micro USB to my iMac, iTunes 11 does not recognize the ATV, so Im not able to reset it.
Thanks for your support!

Hi George,
thats what I did. ATV does not become visible in itunes.
The support document is based on an older version of iTunes. Is the solution still valid?

It is not possible to reset to factory State

Ciao
My pc has this problem: "it is not possible to reset to factory State"
Noteboock HP Pavilion dv6-6c65el
OS: Windows 7 Home Premium 64-bit SP1
CPU Intel Core i5-2450M CPU @ 2.50\3.10GHz hd3000 integrata
Graphics Radeon HD 7690M XT 2Gb GDDR5
BIOS Brand Hewlett-Packard
Version F.12 Date 10/26/2011
Hard disk (C) OS+(D) Recovery+(E) HpTools.
After performing "reset factory state" (with HP Recovery Manager) I noticed the malfunction IE9 32bit.
Moreover, the absence of other software preinstalled (missing: Hp Hp setup-documentation-IE9 64bit).
When I tried a new reset, HP Recovery Manager to the voice system recovery (factory state) tells me:
(disabled: to restore the system, use recovery media)
Using Recovery DVD (in excellent condition),you receive the following error message:
"windows as encountered a problem comunicating with a device connected to your computer-This errorcan be cause by umpluggin a
removable storage device such as an exsternal usb drive while the device is in use,or by faulty hardware such as hard drive or cd-rom drive
that is failing make sure any removable storage is properly connected and then restart your pc" Status:0xc00000c9 Info: an unespected I\O error as occurred"
The same happens with the F11 key during startup. Reset error.
The System Restore Microsoft does not resolve.
In Windows everything else seems to work and the hardware of the notebook has no problems.
The original dvd player has been replaced with a compatible; reads all the disks supported.
Only install MSE (I use only portable software).
There are no viruses or other malaware.
I performed procedures in hp support but nothing has changed.
You can find a solution?
Ciao e grazie
Lecce2
This question was solved.
View Solution.

I have no more 'answer because my computer had crashed complete.
I apologize.
Order the media why?
If discs created the first time the PC will not work. I suppose that does not solve the problem discs hp (I also read about a problem like mine. This problem has not been resolved with the media bought by HP).
I shot weeks the web and I finally found the appropriate procedure.
I made several attempts to solve the problem. But now I have succeeded.
1- Show Hidden Files \ protected
2- Enter with a program (es: file commander) in recovery partition and copy the file or files base.wim. My is about 18 Gb, 1 file.
3- We need a second PC and dvd
4- Follow a procedure described by internauta 37.
Search "Ripristinare portatile HP senza DVD e se l'HP Recovery Manager non funziona Internauta37"
E 'was for me a little complicated but in the end I have my hp to the state of factory and everything works perfectly.
Thank you all

Problem with FBRA reset

Hi All,
When accounting documents are reset through FBRA, only few items of accounting document are reset properly.
A document is reset through FBRA. Only one item of document is reset (clearing document is set to initial; i.e., In BSEG table AUGBL field is set to initial for only one item). The other item still having clearing document in BSEG.
Due to this, when reversing this document throug FB08, an error is coming as 'Document includes already cleared items - reversal not possible'.
What could be the reason for this partial reset.
Thak you,
Rajesh.

When we manually clear any document via F-44 or F-32, system generate a document number which is of AB type. In order to reverse the document which is manually cleared, we need to reset or reverse the AB document also otherwise the system will throw error message.
So, In your case, you need to reverse or reset the AB document also via FBRA in order to reverse the main document via FB08.
Regards
Sandeep Chandak

MR8M-Document already contains cleared items - reversal not possible

Hi Gurus,
I am getting error message Document XXXXX 1000 2014 already contains cleared items - reversal not possible while cancelling IR via Tcode MR8M.
Invoice was already paid twice by mistake hence we are trying to cancel via MR8M.
I know we can do via FBRA by resetting the cleared item but is there any other options or workaround?
Thanks,
Kumar

Hi Jurgen,
Thanks for your reply;
Invoice posted twice and 1 needs to be reversed. Please refer the attached screenshot.
Thanks,

Not possible to scroll the menu without lagging - Set Up a Repair service is not working

Hi,
It is not possible to scroll the menu without lagging.
The latest version has been restored but nothing.
I think the touch screen is having some problems.
I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
As soon as push the Continue button, nothing happens.
Is there anybody from Apple who can check this issue please?
Thank You.
Anmary

Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is part of the backup.
More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
Not being able to fill in the passcode is not much different from forgetting it.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Also have a look at this one: iTunes: About iOS backups

Since one of the updates of firefox it is not possible to add a document to my email i.e. Telfort.nl

Since one of the latest updates of firefox it is not possible to add a document to my email account i.e. Telfort.nl
I checked with Telfort and no problems of this kind is known.

You can check for problems caused by extension and plugins.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
You can try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
* http://kb.mozillazine.org/mimeTypes.rdf
* http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can try to reset Firefox.
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
Reset creates a new profile and tries to import some settings from the old profile leaving the old profile intact.
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Dual Boot with Snow Leopard and Mavericks not possible?

I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it - but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
"Volume Erase failed with the error:
Could not unmount disk"
When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
"disk utility Info" when verinfying the secondary drive in the oprical bay:
Verifying volume “Samsung SSD Daten”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 40)
Checking catalog file.
Unused node is not erased (node = 30)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 8)
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
The volume Samsung SSD Daten was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Samsung SSD Daten”
Error: Could not unmount disk

In App Store I'm blocked on the window of a certain application, not possible to get out of it

In App Store I'm blocked on the window of a certain application, not possible to get out of it

Try closing the App Store app via the iPad's multitasking bar and see if it works ok when you re-open it :
iOS 7 : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then you could try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

FBRA: resetting not possible

Similar Messages

Maybe you are looking for