I need help with 845 pro MS-6529 Mainboard and drivers for sound!! PLZ HELP

I have a 845 Pro MS-6529 Mainboard and i recently just scrubbed my computer and reinstalled windows ME. But i need to re-install the driver for sound because i can't hear anything but when i downloaded it , the files did not work and i've tried redownloading and etc and any other way possible the computer says there is no new driver software on the computer for it. I could swear though that it seems like the download is missing a file or something? could someone possibly download the software quickly for windows ME 845 Pro MS-6529 Mainboard sound driver and check for me in any way? i would b greattttlyyyy thankfull to anyone who could help!!! thanx!

Hi,
On-Board sound is enabled in bios?????
Also, you will need to update Direct-X for all features too work........
Del

Similar Messages

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

845 Pro(MS-6529) won`t boot

845 Pro(MS-6529) Won`t boot, D-led diagnostic is "Ëarly chipset initialization". What is mean? ?(

Hiya fellas; I know you guys are probably getting frustrated with not being able to POST your systems, But it would be a big help to all of us if you gave us more info (specs.) on your PC's ..It would be a great help if you guys would create singnatures with your profile editor, As we need to know first and most importantly, the specs. of your Powesupply in amps on the Rails..ie+12V=?A, +3.3V=?A, +5.0V=?Amps...This info can be found on the side of the PSU(you will have to remove the PC's side cover)...But until you can create a signature here are a few thing that you can try .....Upon Power up, Enter the BIOS, if you have the option set the Memory timings to SPD (Serial Presence Detect)...Also if you have the option to adjust DRAM (V-DIMM) Voltage, try to set it to 2.7 Volts......Sean REILLY875

Does anyone could help with autoviewer-pro 1.3

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

This post is from another topic but has to do with iPhone 4s unlock.
ArnettH_VZW
replied 11 hours ago
Good morning frank-bao,
In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
The device being unlocked must be active on a Verizon Wireless line of service.
The line of service must be active at least 60 days.
The line of service must be in good standing for the past 60 days.
Customer may only have one 3G SIM Unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

Help with autoviewer-pro 1.3!

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

bpang,
Kindly tell me how you solved your problem
BB

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

845 Pro (Socket 423) mainboard

Hi everyone,
I have a 845 Pro (Socket 423) mainboard that does not boot. I bought it 8 months ago, and despite burning a power supply, it was working fine.
I have checked the D-LED signals and it stays at "Initializing Keyboard Controller" after I turn the power supply on. I don't know what caused this, but I can't open my computer any more..
Can anybody help me? ;(

I tried another keyboard but it is still not booting..I think it is from the mainboard, what shall i do?
thx
Quote
Originally posted by wonkanoby
got another key board to try

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

How. Can I get help with illegal iTunes charges on my credit card,for things I did not order. Chuck

How can I get help with illegal iTunes charges on my credit card for things I did not order. chuck

Same answer as last times you asked the same question:
iTunes adding charges to my credit card fog things I did not order. What can I do about it. Chuck

I keep having trouble with my pro it keep asking me password for my yahoo account

I keep having trouble with my pro it keep asking me password for my yahoo account

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your phone number from your post.
If you can't remember the answers then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) - but some recent posts are saying that Apple have temporarily suspended the reseting of security question/answers whilst account security processes are improved, so it may take longer.

Well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)

If you set the phone to erase on 10 failed passcodes - then just keep typing and it will wipe itself.
Otherwise I believe you can set it to recovery mode and restore etc.. via iTunes... There is no easy way as the passcode is designed to protect the phone exactly against what you are trying to do now...
http://osxdaily.com/2011/01/08/iphone-recovery-mode/
Others may have some additional tips !
Sorry for the probs you are having...
Regs Neil

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007.

Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field since our autodiscover function is not functioning. But still it doesn't work. There are no errors, no popups. We turned on the logging and in the logs, it says a error of -3259. We are stuck and any help will be really appreciated.

I have a customer experiencing exactly the same issue. Their computer is running Windows 7 Pro with Office 2007 SP3. After seemingly exhausting all troubleshooting options, I backed up their data, formatted the hard drive and performed a clean install of
Windows and all their applications. It didn't solve the problem!
What's strange is the customer also has a laptop computer, running the same version of Outlook, and that doesn't experience any problems connecting to Office 365 on the same network.
My next step is to send the customer a new ADSL modem/router to try.
I have another customer on Office 365, also running Outlook 2007, and they also experience issues with emails sitting in the outbox while Outlook displays the status message “Outlook is trying to retrieve data from the Microsoft exchange server outlook.office365.com.”
In this case Outlook doesn't freeze/stop responding, like it does for the first customer I mentioned.

Software and Drivers for an HP Scanjet 5590 with a 64 bit Windows 7 computer.

I thought that I had posted the following question but as I can't find it I will try again. I have been given a HP Scanjet 5590 scanner with no Software or Drivers for 64 bit Windows 7 computer and looking through the Web I saw some awful comments on the experiences of those using the software and drivers. I don’t want to make the same mistake so could anyone tell me how to go about obtain the correct software and drivers?

Corporal,
Here is the link for the software...
If you have the "p" model, backtrack a the link and reselect the proper model.
You want the "Full Feature" software.
Note that the download size is 315MB - plan accordingly if you have a slow connection...
While you are there, be sure to download the Print Doctor utiltity. (Do that first, it is tiny.) This may help later with installation and connection issues, if needed.)
HP Scanjet 5590 Digital Flatbed Scanner series - Software and Drivers
I hope this helps...
   Click the White Kudos Star on the Left to give Kudos for the help.
       Please Click “Accept as Solution” to say issue is solved.
Always Include: (Computer) Product Number , Printer – Model Number ,
                             Never give out your Serial Number
                              2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

I need to run Autocad, only doing 2D works and photoshop for photography. Do you think the MBA13" is capable of doing suck task?

I need to run Autocad, only doing 2D works and photoshop for photography. Do you think the MBA13" is capable of doing suck task?
I have to carry the laptop to work 6days/week, plus I'm a girl so light weight is what i'm looking for. and I really love the MacBook Air.
Plz help!!!

In my opinion LabVIEW would be up to the task. However on important thing to note is that you can write inefficient code in any language. I would venture to guess that if you wrote the C++ code (sounds like you don't have much experience in that arena) there would be more risk of writing inefficient code than in a language you have experience with. In addition, LabVIEW makes it easy to support parallel processing which can improve your performance. Parallel programming in C++ is non-trivial. LabVIEW is a fully compiled language and doesn't suffer from performance hits you get from interpretive script languages.
BTW, the problem you described doesn't sound very taxing on a well written LabVIEW application.
You may want to look at some of the videos of the demos from this year's NI Week. There were some extremely powerful applications that very doing some very heavy duty number cruntching and data acquision.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

I need help with 845 pro MS-6529 Mainboard and drivers for sound!! PLZ HELP

Similar Messages

Maybe you are looking for