I need help with clipping in my perspective window

Are there limits on how much of my scene is visible in my perspective window?
I can only see a portion of the objects in my perspective window. The rest appears to be getting clipped.
I've tried adjusting a lot of setting but can't figure it out. It's like there is some kind of near/far clipping plane going on.
Here's a link to see what I'm talking about.
www.drewwfilms.com/QandA/testPage.html
Thanks!

Select the Camera and go the the Camera tab of the Inspector. Adjust the Near and Far Planes as desired.

Similar Messages

I need help with my new ipod on windows me

I bought myself an ipod in the states (usa) i was told it was universal & can be used in the uk! i have windows ME & was also told this would be compatible with this computer but once i tried to download my software of the cd & put in my details of the ipod it came up with the following error message:ERROR 1904.MODULEC:\PROGRAM FILES\IPOD\IPOD UPDATER 2005-02-07\IPOD UPDATER EXT.Dll FAIIED TO REGISTER .HRESULT-2147220473 CONTACT YOUR SUPPORT PERSONELL.
can any one help????
aslo i was told once downloaded onto my p.c i then cant use my ipod on another p.c this does not make any sense say if you upgrade your p.c does this mean you then cant use your ipod anymore ??? please help me ???

Hello Andrew,
Was the reply I gave you in the other post you made of no help?
I explained that Windows ME is not compatible, but you can get it work with a little messing around, and once again, here's a link on how to do it.
Guide to iPod and Windows ME.
As I said previously though, you won't be able to use iTunes.
See my other answer to you here.
Jeff Bryan, "Need help with my iPod." #4, 06:13am Aug 8, 2005 CDT

Export Results-Not Enough Memory (1). I need HELP with this please. Using Windows 7 32-bit. Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

Everytime I go to export a photo, I get an error.
"Export Results: Not enough memory (1)
Using Windows 7 32-bit. Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

Even though you have 16gb of ram installed, 32 bit Windows can only use 4gb of it so 12gb is wasted. This is the reason you are getting not enough memory errors and is a known problem with Lightroom an 32 bit Windows during export. You need to change to 64 bit Windows.

I NEED HELP WITH THE SIZE OF MY WINDOW ON IPHOTO 08'

Hi, I have had my mac for a while now and I was wondering if somene could help.
I know it is alot different then other computers when choosing the size of the appearence of windows on the screen. I have been using iphoto for a while and when I first started using it the application only took up half of the screen (when fully opened) which i was really happy about since it made it easy for my to drag and drop onto my desktop. The other day I clicked the green button in the top left corner to make it bigger, as I thought it would help with what I wanted to do.
My problem is.. now when I go to click the green button to shrink it down to half the size again it does not work. I am wondering if there is something wrong? or is it just always supposed to be this way? I am hoping not as i really liked having it in a smaller window. please help
thanks, katie

Welcome to the Apple Discussions.
You can resize any window on a Mac simply by grabbing the lower right hand corner and dragging.
Regards
TD

Need Help with Clip/Sequence Settings

Okay so I have a video with three or four sequences and all the clips are from the same tape and camera. The only problem is that about 2 or 3 clips in one sequences have black bars on the top and bottom of them (letterboxed?), only when they are on that sequence. So, I could take these clips that are i letterboxed in sequence 2, put them in sequence 1, and they are normal, no longer letterboxed. Please help, I have no idea what to do, and have been trying to fix it for hours.

Okay I just fixed it by going to that clip in the browser and un-checking anamorphic, even though every other clip has it checked?
Maybe someone could clear this up?
Thanks

Need help with clip form iphone

I´ve just imported a clip from my Iphone into my FCE project. The settings for my project is AIC 1920 X 1080i50 because my other clips fit those settings (shot with my real videocamera). Anyway, I want to include the Iphoneclip in that project, and I want it to fill the screen, so I don´t have black lines on each side of the Iphone clip. I´m not sure how I do it.
I´ve tried scaling it up, but then I lost so much of the action in the clip. Is there a way to just upscale the image to fit the screen (I don´t care much about the quality loss, I just like the clip and want to include it).
Thanks

You should sync first to make sure everything ( contacts,etc) are synced with your computer. Hold the home and power button down until the Apple appears. You shouldn't lose anything.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Also, 2.0.1 just came out a couple of days ago to fix some bugs in the 2.0 software. In itunes click check for update.

Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

I need help with my drivers on my windows 8 partition

So i installed windows 8 with bootcamp and im pretty sure my drivers are messed up. On the windows side, my network connection is terrible, my second monnitor wont work, and when i try to run the games i got windows 8 for they are extremely slow. I have no idea how to safely re-install the drivers and get the right and working ones and i dont want to break my computer. I have the new 21-inch imac.

Download and install this support software version > http://support.apple.com/kb/DL1638 Just decompress the file and run the installer, so you will install the most recent drivers

Need help with HP OfficeJet 6210 over windows shared network.

Hello All,
I have a HP OfficeJet 6210 that is hooked up to my Dell PC. The printer is setup on share mode and works well with other pc's on the network.
However, I am having problems with it working on my G5. When I goto System Preferences then Printer/Fax setup. I click on the printing tab, I am able to find the printer over the shared network and it set's it up as the default printer. So all that works fine, but when I try to print nothing happens. I looked at the driver and noticed the correct one is not being used. I am having a hard time installing the correct driver. On the G5 if I click on the Printer setup and then look under model. I do not see my printer listed anyway. Is there a simple way to add this driver to the list?
Thank you,
Michael

Thanks David. I have downloaded that file from the HP website, however I am having trouble locating that driver on my Mac HD. When I hook the printer directly to the Mac, it automatically selects driver 3.3. When I try to use the printer while connected to my Dell maching running XP, I cannot find the driver or the model of the printer from the drop down menus in the printer setup utility (under windows printing.) I was going to try to locate the driver myself by selecting "other" instead of finding it by selecting "manufacturer" then "model" of printer. I hope this makes sense.

Need help with a button

Hello,
I need help with a button. I created a button and set it up
so that when you click and hold it, the button becomes lighter in
color (I used Alpha). I want the button to stay this light color
after i release the click. Right now it goes back to the normal
color when I release the click. Can somone help we this?
Thanks!

rpofclt wrote:
> Hello,
>
> I need help with a button. I created a button and set it
up so that when you
> click and hold it, the button becomes lighter in color
(I used Alpha). I want
> the button to stay this light color after i release the
click. Right now it
> goes back to the normal color when I release the click.
Can somone help we
> this?
you can't use the button itself if you want to maintain the
DOWN state after
release as button automatically resets itself once the mouse
lives the HIT zone.
Use movie clip instead and on press simply send it to a frame
where there
is DOWN state like image.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Need help with CS4 transitions

Hi,
I am trying to use a cross dissolve transition. To make it simple, I have two clips. I'm obviously doing something wrong here. I've watched the Adobe TV tutorial and all the guy does is to select cross dissolve from the effects box, and drags it over to the clip on the timeline. I think I am doing the exact same thing, but when I play my clip back, I can see no transition effect played back.
Maybe I'm putting it in the wrong place I thought, so I tried putting it in front of the split between the two clips. Then again at the beginning of the second clip. Neither of them worked, so I shut CS4 down, and booted it up again. I started a new project, and put two new clips in it. I put the dissolve transition at the beginning of the second clip, and it worked like a charm. Then to see if that was a fluke, went to a point about 3 minutes earlier in the timeline. So now I am on clip one. I go and make a cut in the timeline, and try to place another Cross dissolve at this spot. It appears to place the transition there because it creates the rectangular box, and it has the name cross dissolve in that rectangular box,but when I try to play it to see the transition, it isn't working. Go back to the beginning of the second clip, and that one still works perfectly.
I noticed that there is a difference in the appearance of the two cross dissolve rectangular boxes. The one that works has a single diagonal line that goes from lower left to upper right in the cross dissolve box, and then there are a whole series of diagonal lines that go from upper left to lower right all across the cross dissolve box . It looks like a whole bunch of dark gray and white backslashes. In the one that doesn't work, there is just that single diagonal line that goes from lower left to upper right. No backslashes on this one. What am I doing right in the first one, but not in the second?
I find that it will work perfectly if I put in a new clip. If I put in the Cross Dissolve at the beginning of a new clip that I add to the timelime, it will work perfectly. It is only when I try to split a clip that is already on the timeline, and then put the cross dissolve in at that point.
Perhaps it is not possible to do what I am attempting to do. Maybe you can't split a clip and place the transition at that point?

When I am shooting video, it is not unusual for me to be taping a scene of a mountain, for example, and then put the camera on pause, while I briefly position myself to take video of the river that is flowing at my feet. That is what is happened on this clip that I am attempting to put the transition in between. Rather than having the scene just instantly change at this point, from the mountain to the river, it would be nice to have a smoother transition then that.
My mind was working on the problem while sleeping last night, and I think I might understand how to handle it. It might have been too simple for me to think about yesterday. I haven't tried it yet, but would it not work, to insert the mountain scene from my source monitor into the timeline, and then go back and insert the river scene into the time line instead of inserting both of them at the same time. Would these not now be two separate clips on the timeline, and the transition could now be applied?
Your analogy with the DJ is very good, but it isn't quite the same. You are correct in that he would be only fading from one song to the same spot on the same song. In my case I am going from an image of a mountain to an image of a river. Same clip, but different images. I appreciate the help, and your thoughts.
Terry Lee Martin
Date: Sat, 22 Aug 2009 23:15:55 -0600
From: [email protected]
To: [email protected]
Subject: Need help with CS4 transitions
From a creative standpoiint, I don't understand the desire to transition from one clip to the exact same spot on that same clip. That's like a DJ at a night club fading from one song to the exact same spot on that same song being played on a second CD player. What's the point?
>

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Need Help with Inserting Timeline Markers

Friends,
I have not use my premiere element 3.2 since 2008 and forgot some of the procedures. now, I need help with the insertion of Timeline Markers. I did what the Help Page showed me. But the markers were not effective in the resulting DVD, or, even when viewing the video in the editing page as if thye were not there! Here is what I did:.
1) Click the Timeline button.
2) Click in an empty space in a video or audio track in the Timeline to make the Timeline active and deselect any clips.
3) Move the current-time indicator in the Timeline to the frame where I need the marker.
4) Click the Add Marker icon in the Timeline to place the Marker 5 times where I want them.
5) Verified that each Timeline Marker is present at the intended place.
6) Burned DVD
7) Can NOT jump to any of the intended Marker in the Resulting DVD during playback.
The question is "What did I do wrong or didn't do?" It seems that I did the same before and worked! Please advise!
Also, what are the significance of the Red line just below the Timeline and the yellow bars inside the video and audio frames. But after preforming Timeline/Render Work Area, they were all gone? What purposes do they serve and what is the significance of Rendering? Thank you for your help!
I repeat the process and did a Rendering before making the DVD also. It did not help!
Andy Lim

Steve,
Long time no talk! You used to help me out many times when the PE-1 through PE-3 came out. I was HOPING you would still be around and you are! You came through again this time! Many thanks to you.
I use the Add DVD Scene button to insert the Markers. They are Green. Made a DVD and the markers work OK although ythey are "effective" during play back using the editing window.
While that problem was solved, will you come back and answer the other two questions concerning Rendering and the Red/Yellow lines? I would appreciate it very much!
Andy Lim
~~~~~~~~~~~~~~~~

Need help with a currently "in-use" form we want to switch to Adobes hosting service

Hi, I am in desperate need of help with some issues concerning several forms which we currently use a paid third party (not Adobe) to host and "re-distribute through email"...Somehow I got charged $14.95 for YOUR service, (signed up for a trial, but never used it)..and now I am paying for a year of use of the similar service which Adobe is in control of. I might want to port my form distribution through Adobe in the hopes of reducing the errors, problems and hassles my customers are experiencing when some of them push our "submit button". (and I guess I am familiar with these somewhat from reading what IS available in here, and I also know that, Adobe is working to alleviate some of these " submit" issues, so let's don't start by going backwards, here) I need solutions now for my issues or I can leave it as is, If Adobe's solution will be no better for my end users...
We used FormsCentral to code these forms and it works for the most part (if the end-user can co-operate, and thats iffy, sometimes), but I need help with how to make it go through your servers (and not the third party folks we use now), Not being cruel or racist here, but your over the phone "support techs" are about horrible & I cannot understand them or work with any of them, so I would definitely need someone who speaks English and can understand the nuances of programming these forms, to please contact me back. (Sorry, but both those attributes will be required to be able to help me, so, no "newbie-interns" or first week trainees are gonna cut it).... If you have anyone who fits the bill on those items and would be willing to help us, please contact me back at your earliest convenience. If we have to communicate here, I will do that & I can submit whatever we need to & to whoever we need to.
I need to get this right and working for the majority of my users and on any platform and OS.
You may certainly call me to talk about this, and I have given my number numerous times to your (expletive deleted) time wasting - recording message thingy. So, If it's not available look it up under [email protected]
(and you will probably get right to me, unlike my and I'm sure most other folks', "Adobe phone-in experiences")
Thank You,
Michael Corman
VinylCouture
Phenix City, Alabama 36869

Well, thanks for writing back...just so you know...I started using Adobe products in 1987, ...yeah...back then...like Illustrator 1 & 9" B&W Macs ...John Warnock's Helvetica's....stuff like that...8.5 x 11 LaserWriters...all that good stuff...I still have some of it working on a mac...much of it was stuff I bought. some stuff I did not...I'm not a big fan of this "cloud" thing Adobe has foisted upon the creatives of the world...which I'm sure you can tell...but the functionality and usefulness of your software can not be disputed, so feel free to do whatever we will continue to pay for, ...I am very impressed with CC PS on the 64 bit PC and perhaps I will end up paying you the stipend that you demand for the other services.
So I guess that brings us to our problem.. a few years back and at the height of the recession and near bankruptcy myself, I was damn lucky and hit on something and began a small arts and crafts supply service to sell my products online to a very "niche market" ...I had a unique product and still sell that product (plus others) online...My website is www.vinylcouture.com...Strange? Yes...but there is a market it seems, for everything now, and this is the market I service...Catagorically, these are 99%+ women that use these "adhesive, sticky backed vinyl products" to make different "craft items" that are just way too various and numerous to go into... generally older women, women who are computer illiterate for the most part...and all this is irrelevant to my problem, but I want you to have every bit of background on this and especially the demographic we are dealing with, so we can get right to the meat of the problem.
OK...So about two years ago, I decided to offer a "plain sheet" product of a plain colored "stick back" vinyl... it is available in multiple quantities of packs ( like 5 pieces, 10 pieces, 15 pieces, in a packi & so on)...and if you are still on my site.. go to any "GO RIGHT TO OUR ORDER PAGE" button, scroll down a little...and then to the "PLAIN VINYL" section...you will see the Weebly website order process.) You can back out from here, I think,..but, anyway this product is available in 63 colors + or - a few. So then the problem is, how do they select their individual colors within that (whatever) pack?... .
So my initial idea was to enable a "selection form" for these "colors" that would be transmitted to me via email as 'part" of the "order process".. We tried getting our customers to submit a " a list" ( something my competitiors still do, lol, poor bastards)......but that..is just unbelievable..I can't even begin to tell you what a freakin' nightmare that was...these people cannot even count to 10, much less any higher... figuring out what colors to list and send me... well, lets just say, it wasn't working......I had to figure out a better way...Something had to be done.
So after thinking this all out, and yeah...due to my total ignorance, i figured that we could make a form with Live Cycle Designer (Now Forms Central)...(back then something that was bundled with Adobe Acrobat Pro), I believe, and thats what this thing was authored in... and it would be all good...LOL!
Well not so simple...as you well know, Adobe Acrobat would NOT LET YOU EMAIL anything from itself.....it just wouldn't work (and I know why, and all that hooey), but not being one to take NO for answer,.I started looking for a way to make my little gizmo work.. So I found this company that said they can "hijack" (re-direct actually) the request to email, bypass the wah-wah, and re-transmit it to the proper parties.....for less than $100 a year, I think...its called http://pdf-fillableforms.com/.
A nice gentleman named Joseph Silva helped us program the thing to go to his servers and back out. Please dont hassle them...I need them...for now..it basically does work...try it...you should get back a copy of the form that you filled out...good luck however, if you're on MAC OSX or similar...
I have included a copy of both of our forms (and feel free to fill it out and play with it)...just put test somewhere on it...(and you must include YOUR email or it will balk)..they are supposed to be mostly identical, except one seems to be twice as large....generating a 1.7 meg file upon submission, while the other one only generates a 600K file or so...thats another issue for another day or maybe you can advise on that also...
OK so far so good......In our shop, once Grandma buys a 10 pack (or whatever), Only then she gets to the link on her receipt page ro the relevant "selection form" ,(this prevents "Filling and Sending" with "no order" and "no payment", another early problem we had)... which they can click on and it will usually download and open up on their device if all goes well...Then our little form is supposed to be fillable and is supposed to ADD UP all the quantities, so grandma knows how many she is buying and so forth right on the fly, and even while she changes her mind..., and IT'S LARGE so grandma can see it, and then it TOTALS it all up for them, ( cause remember, they can NOT add).., except there is a programming bug (mouse-click should be a mouse-up probably or something..) which makes you click in the blank spaces to get to a correct TOTAL...about 70-80% of our customers can enable all these features and usually the process completes without problems for them especially on PC's running Windows OS and Acrobat Reader X or XI...at least for most... Unfortunately it is still not the "seamless process" I would like or had envisioned for the other folks out there that do have trouble using our form.... Many folks report to us the following issues that we know of. First of all it takes too much time to load up...We know its HUGE...is there anyway that you can see, to streamline this thing? I would love for it to be more compact...this really helps on the phones and pads as I'm sure you well know.
Some just tell us,"it WON'T work"....I believe this is because they are totally out of it and dont even have Adobe Reader on their machine, & don't know how to get it ( yes, we provide the links).....or it's some ancient version....no one can stop this one...
It almost always generates some kind ( at least one time) of "error message" which we do warn them about..., telling one, basically that "Acrobat doesnt even like this happening at all, and it could be detrimental to ones computer files", blah-blah...(this freaks grandma out really bad)...& usually they end up not even trying to send it... and then I get calls that even you wouldn't believe...& If they DO nut up and push the Red "Submit Form" button, it will usually send the thing to us (and also back to them at the "required email address" they furnished on the form, thats what the folks at the "fillable forms place" do) so, if it's performing it's functions, why it is having to complain?. What are we doing wrong?....and how can I fix it?...Will re-compiling it or saving it as a newer version of "FormsCentral" correct any of these problems ?
Ok, so that should keep you busy for a minute and we can start out with those problems...but the next thing is, how can I take advantage of YOUR re-direct & hosting services?, And will it get rid of the error messages, and the slowness, and the iOS incompatibilities ? (amazingly, the last iOS Reader version worked almost OK.. but the newest version doesnt seem to work with my form on my iphone4) If it will enable any version of the iOS to send my form correctly and more transparently, then it might be worth the money...$14.95 a MONTH you say. hmmmmm...Better be good.
Another problem is, that I really don't need 5000 forms a month submitted. I think its like 70-100 or less....Got any plans for that? Maybe I'm just not BIG ENOUGH to use Adobe's services, however in this case, I really don't care whose I do use as long as the product works most correctly for my customers as well as us. Like I said, If I'm doing the best I can, I won't change anything, and still use the other third party, If Adobe has a better solution, then i'm all for that as well. In the meantime, Thanks for any help you can provide on this...
Michael Corman
VinylCouture.com
(706) 326-7911

I need help with clipping in my perspective window

Similar Messages

Maybe you are looking for