I Need to use ABS for the following statement

Hi
WA_OUTTAB-CORES_PER_MOLD = GT_IOOPCOMP-BDMNG / GT_IOOPER-MGVRG.
I need to put ABS for the following statement.
Kindly help.

WA_OUTTAB-CORES_PER_MOLD = GT_IOOPCOMP-BDMNG / GT_IOOPER-MGVRG.
WA_OUTTAB-CORES_PER_MOLD = abs(WA_OUTTAB-CORES_PER_MOLD).
Regards
Aneesh.

Similar Messages

  • Need best Architecture design for the following scenario

    Hi Experts,
    I need best architecture design for the following scenario:
    Sender: Mail
    Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then  send Mail(SOAP adapter executed successfully) and SMS .  So receiver is SOAP, Mail and SMS.
    My current approach issue:
    Three message mapping:
    Mapping1: mail to SOAP
    Mapping2: mail to Mail
    Mapping3: mail to SMS
    In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
    Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
    But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
    Note: There is possible to fail the SOAP request in adapter engine.
    Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
    Thanks for advance!!
    Regards, Kumar

    What do you mean by successful execution of soap call?  Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms.  How big call is your soap ?  If your soap interface is very simple I can give the other possible way.
    Sender sends the message, use mapping  to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS).  If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
    Other option is go for CCBPM.  Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block,

  • I Need A Clasical Report For  The Following Specification Plz

    With out Using any ALVS .
                                                          SALESORDER REPORT
    TABLES : VBAK,
                       VBAP,
                        KNA1.
    INPUT FIELDS :  Sales Document  (RANGE)----
      (vbak-vbeln)
                                  Document Date (Date Received/Sent).(RANGE)----
    (vbak-audat)
                                  Sold-to party (PARAMETERS)----
    (kna1-kunnr)
    O/P FIELDS :
    Sales Document----
    (vbak-vbeln)
    Document Date (Date Received/Sent)----
    (vbak-audat)
    Sales Document Item----
    (vbap-posnr)
    Short text for sales order item----
    (vbap-arktx)
    Material Number----
    (vbap-matnr)
    Cumulative order quantity in sales units----
      (VBAP-KWMENG)
    Requested delivery date----
    (VBAP-CMKUA)
    CUSTMER NUMBER(Sold-to party) -
    (kna1-kunnr)
    CUSTMER NAME -
    (KNA1-NAME1)
    CUSTMER CONTRY----
    (KNA1-LAND1)
    Net Value of the Sales Order in Document Currency----
    (VBAK-NETWR)
    Sales Organization----
    (VBAK-KORG)
    Name of Person who Created the Object----
    (VBAK-ERNAM)
    ================================================================================
    VBAK :
                                                                                    (KNA1-KUNNR)
    Sales Document----
    (VBAK-VBELN)
    Document Date (Date Received/Sent)----
      (VBAK-AUDAT)
      Net Value of the Sales Order in Document Currency----
    (VBAK-NETWR)
    Sales Organization----
    (VBAK-KORG)
    Name of Person who Created the Object----
    (VBAK-ERNAM)
    VBAP:
    Sales Document Item----
    (VBAP-POSNR)
    Short text for sales order item----
    (VBAP-ARKTX)
    Material Number----
    (VBAP-MATNR)
    Cumulative order quantity in sales units----
      (VBAP-KWMENG)
    Requested delivery date----
    (VBAP-CMKUA)
    KNA1:
    CUSTMER NUMBER(Sold-to party) -
    (KNA1-KUNNR)
    CUSTMER NAME -
    (KNA1-NAME1)
    CUSTMER CONTRY----
    (KNA1-LAND1)
    ====================================================================================================
    TABLES : VBAK,
    VBAP,
    KNA1.
    INPUT FIELDS : Sales Document (RANGE)
    Document Date (Date Received/Sent).(RANGE)
    Sold-to party (PARAMETERS)
    O/P FIELDS :
    Sales Document ....... VBAK-VBELN
    Document Date (Date Received/Sent).....VBAK-AUDAT
    CUSTMER NUMBER(Sold-to party)................VBAK-KUNNR
    Net Value of the Sales Order in Document Currency.....VBAK-NETWR
    Sales Organization......................................................VBAK-KORG
    Name of Person who Created the Object..................VBAK-ERNAM
    Sales Document Item ...............VBAP-POSNR
    Short text for sales order item..........VBAP-ARKTX
    Material Number.............................VBAP-MATNR
    Cumulative order quantity in sales units............VBAP-KWMENG
    Requested delivery date.................VBAP-CMKUA
    CUSTMER NAME..................KNA1-NAME1
    CUSTMER CONTRY..........................KNA1-LAND1

    Here is the sample code, please make the necessary modifications...
    REPORT ZTEST LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
    HEADING.
    *TABLES DECLARATION
    TABLES : KNA1, VBAK, VBAP.
    *SELECT OPTIONS
    SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
    *INITIALIZATION
    INITIALIZATION.
    CUST_NO-LOW = '01'.
    CUST_NO-HIGH = '5000'.
    CUST_NO-SIGN = 'I'.
    CUST_NO-OPTION = 'BT'.
    APPEND CUST_NO.
    *SELECTION SCREEN VALIDATION
    AT SELECTION-SCREEN ON CUST_NO.
    LOOP AT SCREEN.
    IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
    MESSAGE E001(ZTJ1).
    ENDIF.
    ENDLOOP.
    *BASIC LIST SELECTION
    START-OF-SELECTION.
    SELECT KUNNR NAME1 ORT01 LAND1 INTO
    (KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
    FROM KNA1
    WHERE KUNNR IN CUST_NO.
    WRITE:/1 SY-VLINE,
    KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
    16 SY-VLINE,
    KNA1-NAME1 UNDER 'NAME',
    61 SY-VLINE,
    KNA1-ORT01 UNDER 'CITY',
    86 SY-VLINE,
    KNA1-LAND1 UNDER 'COUNTRY',
    103 SY-VLINE.
    HIDE: KNA1-KUNNR.
    ENDSELECT.
    ULINE.
    *SECONDARY LIST ACCESS
    AT user-command.
    IF SY-UCOMM = 'IONE'.
    PERFORM SALES_ORD.
    ENDIF.
    IF SY-UCOMM = 'ITWO'.
    PERFORM ITEM_DET.
    ENDIF.
    *TOP OF PAGE
    TOP-OF-PAGE.
    FORMAT COLOR 1.
    WRITE : 'CUSTOMER DETAILS'.
    FORMAT COLOR 1 OFF.
    ULINE.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'CUSTOMER NO.',
    16 SY-VLINE,
    18 'NAME',
    61 SY-VLINE,
    63 'CITY',
    86 SY-VLINE,
    88 'COUNTRY',
    103 SY-VLINE.
    ULINE.
    FORMAT COLOR 3 OFF.
    *TOP OF PAGE FOR SECONDARY LISTS
    TOP-OF-PAGE DURING LINE-SELECTION.
    *TOP OF PAGE FOR 1ST SECONDARY LIST
    IF SY-UCOMM = 'IONE'.
    ULINE.
    FORMAT COLOR 1.
    WRITE : 'SALES ORDER DETAILS'.
    ULINE.
    FORMAT COLOR 1 OFF.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'CUSTOMER NO.',
    16 SY-VLINE,
    18 'SALES ORDER NO.',
    40 SY-VLINE,
    42 'DATE',
    60 SY-VLINE,
    62 'CREATOR',
    85 SY-VLINE,
    87 'DOC DATE',
    103 SY-VLINE.
    ULINE.
    ENDIF.
    FORMAT COLOR 3 OFF.
    *TOP OF PAGE FOR 2ND SECONDARY LIST
    IF SY-UCOMM = 'ITWO'.
    ULINE.
    FORMAT COLOR 1.
    WRITE : 'ITEM DETAILS'.
    ULINE.
    FORMAT COLOR 1 OFF.
    FORMAT COLOR 3.
    WRITE : 1 SY-VLINE,
    3 'SALES ORDER NO.',
    40 SY-VLINE,
    42 'SALES ITEM NO.',
    60 SY-VLINE,
    62 'ORDER QUANTITY',
    103 SY-VLINE.
    ULINE.
    ENDIF.
    FORMAT COLOR 3 OFF.
    *END OF PAGE
    END-OF-PAGE.
    ULINE.
    WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
    SY-PAGNO.
    SKIP.
    *& Form SALES_ORD
    *& FIRST SECONDARY LIST FORM
    FORM SALES_ORD .
    SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
    (VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
    FROM VBAK
    WHERE KUNNR = KNA1-KUNNR.
    WRITE:/1 SY-VLINE,
    VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
    16 SY-VLINE,
    VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
    40 SY-VLINE,
    VBAK-ERDAT UNDER 'DATE',
    60 SY-VLINE,
    VBAK-ERNAM UNDER 'CREATOR',
    85 SY-VLINE,
    VBAK-AUDAT UNDER 'DOC DATE',
    103 SY-VLINE.
    HIDE : VBAK-VBELN.
    ENDSELECT.
    ULINE.
    ENDFORM. " SALES_ORD
    *& Form ITEM_DET
    *& SECOND SECONDARY LIST FORM
    FORM ITEM_DET .
    SELECT VBELN POSNR KWMENG INTO
    (VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
    FROM VBAP
    WHERE VBELN = VBAK-VBELN.
    WRITE : /1 SY-VLINE,
    VBAP-VBELN UNDER 'SALES ORDER NO.',
    40 SY-VLINE,
    VBAP-POSNR UNDER 'SALES ITEM NO.',
    60 SY-VLINE,
    VBAP-KWMENG UNDER 'ORDER QUANTITY',
    103 SY-VLINE.
    ENDSELECT.
    ULINE.
    ENDFORM. " ITEM_DET
    Regards,
    Pavan.

  • Has anyone needed to use AppleCare for the AppleTV2?

    My complimentary 90-day support ends soon, and I'm wondering if it's worthwhile to buy the extended care for this particular device?

    Here's an excerpt from the email from Apple:
    "The AppleCare Protection Plan for Apple TV gives you:
    Apple hardware coverage.
    Hardware coverage on your Apple TV, included accessories, and AirPort device or Time Capsule"
    Does that mean that my current (and older) AirPort Extreme is included in the Apple TV coverage?

  • Need Mapping logic for the following scenario

    Hi everyone,
    I need a mapping logic for the following scenario.
    For the same order no with same material no, the quantity should be summed and only one idoc should be created.
    For the same order no with different material no, no need to sum the quantity and only one idoc should be created.
    For example:
    Source Structure:
    Ord No      Mat No      QTY
    12               1               2
    13               1               3
    13               2               1
    12               2               4
    15               1               5
    14                3              7
    12               1              6
    Target Structure:
    Ord No      Mat No      QTY
    12               1               8
    12               2               4
    13               1               3
    13               2               1
    14               3              7
    15               1              5
    Thanks in Advance

    Try the graphical mapping as shown below using concat with a space as delimite and UDF to split the value again by space.
    1. Idoc node
    (RootContext)
    OrdNo
         |concat[ ] -> sort[asending] -> SplitByValue -> collapseContexts -> Idoc
    MatNo                case sensitive    [ValueChange]                              
    (RootContext)
    2. OrdNo
    OrdNo(RC)
         |concat[ ] -> sort[asending] ->SplitByValue->collapseContexts->SplitByVale-> UDF to fetch ordno  -> OrdNo
    MatNo(RC)           case sensitive    [ValueChange]                [eachValue]   (return var1.split(" ")[0];)
    3. MatNo
    OrdNo(RC)
         |concat[ ] -> sort[asending] -> SplitByValue ->collapseContexts->SplitByVale-> UDF to fetch ordno  -> MatNo
    MatNo(RC)              case sensitive    [ValueChange]                  [eachValue]   (return var1.split(" ")[1];)
    4. Qty
                   [asending,case sensitive]               
                   --  sortByKey -----> formatByExample -> sum ->Qty
    OrdNo(RC)           |          |          ^          
         |concat[ ] -> |            Qty(RC)          |
    MatNo(RC)           |                |     
                   --sort[asending]-> SplitByValue
                       case sensitive    [ValueChange]
    Regards,
    Sunil Chandra

  • Variable Substitution  need to define pay load for the following structure

    Hi All
    Please help me for defining the pay load for the following structure for the Variable Substitution 
    for genearing the file dynamically fro the payload
    Target structure is like this
    MT_RFQ_IND_IDOC_MYSPACE_TARGET............> my message type
        <HEADER>
              < FileName>
              <INDI>
              <RFQNO>
              <DOCUTYPE>
       < ITEM>
              <FEILD1>
             <FEILD2>
             <FEILD2>
    please help me
    thanking you
    Sridhar

    Hi,
    should this var1 given in any data type of my IR - No
    in variable substitution, in value give the complete thing which i said above in italics i.e. payload:MT_RFQ_IND_IDOC_FILE_TARGET,1,hEADER,1,FileName,1
    which user you used for CPACache refresh - it can only be done by XIDIRUSER.
    Regards,
    Rajeev Gupta
    Edited by: RAJEEV GUPTA on Feb 6, 2009 7:34 AM
    Edited by: RAJEEV GUPTA on Feb 6, 2009 7:35 AM

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • What r all the tables  used for the following report

    hai
    what r all the tables  used for the following report
    report:
    <b>
    •     Report that displays all the late shipments in a particular period of time</b>
    send important fields for this tables also
    thanks in advance.

    Hi,
       Imp table are vttk,vttp,vtts.
    Regards
    Amole

  • Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with  PSE 12 when purchased recognize  the cameras listed in the question or do I need to

    Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with  PSE 12 when purchased recognize  the cameras listed in the question or do I need to download  the camera Raw Version 8.3 ?

    While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
    I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

  • Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

    I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
    It seems to be considering these items as removable media?
    DPM 2012, SP1, version 4.1.3313.0
    Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
    Affected area: skutter.pmuk.net
    Occurred since: 11/01/2013 09:04:43
    Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
     DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
    , atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
    , firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
    ,firebird.pmuk.net_HADPCLQuality  , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office  ,firebird.pmuk.net_OMPM
    , firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER  ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8  ,firebird.pmuk.net_Spares 
    ,firebird.pmuk.net_test   ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$  ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON  ,legion.pmuk.net_SYSVOL
    , nemesis.pmuk.net_KEvin  ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$  ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
    ,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
    ,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control  ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital  ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
    ,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs  ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
    ,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
    , valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
    xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
    folder, non-NTFS volumes,  DFS links,  CDs,  Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
    Any Ideas? backups are OK, recovery points/sync's etc.
    Mark.

    I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
    In DPM I disabled EUR
    In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
    Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
    Delete all of the mappings within the container
    In DPM enable EUR
    In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
    Related article on ADSI Edit and DPM -
    http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
    I hope this helps
    JD Young

  • We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks :)

    We need IOS 4.0 for the ipod touch 1st generation not everybody have money to get a new version of ipod touch to used the most important social networks ... please think about it and i would grateful if i can use my old ipod touch .. Thanks

    Sorry, the fellow users in the forum hae no way of making that happen. The maximum iOS for a 1st generation unit is 3.1.3
    Stedman.

  • Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

    Driver files needed for the following Sony dvd/cd rom drive:  "dvd-rom  ddu 1615". 
    The dvd-rom drive will not read any type of dvd or cd.
    desktop computer:  Dell Dimension E310 , windows xp, service pack 3.
    This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.  
    Where can I find driver files for this dvd rom?
    Thanks,
    Denise

    Hello Denise,
    Welcome to the Sony Community.
    All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
    • Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
    • Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
    service, storage support email
    • Please remove your secondary IDE channel from the Device Manager.
    If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
    Thank you for your post.

  • Solution needed for the following Requirement..

    Hi Friends,
    Need an answer for the following . Its for Voluntary Time Recording...
    1) Maintain IT0007 with the percentage of employment for both part time and full time employees.
    2) The Max Flexi-time for part-time and full-time employees is 37.5/40 hours per week.
    3) Maintain attendance infotype.
    4) Notification to be sent to the manager once the flexi-time reaches a limit of +15/-15 hours per week. This has to be done through workflow.
    5) For the fulltime employees, the flexitime applicable is only +15 as they will maintain absence quota.
    6) Once the request is  approved ,  the flexi-time data has to get save in the database.
    7) In the quota overview, the daily view is to be removed. The time accounts detail should not be there. The only relevant columns to be displayed are Key Date(Default is current date), Type(Flexitime) and Current Balance(in hours)
    If you can please let me know of the configuration changes and workflow changes too...
    Thanks,
    Kumar

    Moderator message - Please do not post your requirements and ask the forum to do your work for you.
    post locked

  • HT1338 I use iCal for the first time. How do you update it without needing to update all programs of your computer?

    I use ical for the first time, how do you update the programm without updating for 2 hours all other programms

    From the iCal Help Menu in the Tool Bar...
    Changing or deleting an event
    You can change the time, day, alarm, or any other settings for any events you’ve created, or you can delete an event.
    You can’t change the events on a calendar you’ve subscribed to (subscribed calendars appear in your Calendar list under the heading “Subscriptions”), and you can only change the calendar, status, and alarms for events you’ve been invited to.
    To change or delete an event:
    To change the time or day of an event you’ve created, drag the event to the new time or day in the main calendar view.
    To change an event’s duration, drag the event’s top or bottom edge. (You can resize events only in Day or Week view.) If the event is an all-day event, in Week view, drag the left or right side of it.
    To change the name of an event, double-click it. If necessary, click Edit to open the event editor. Select the event name, type a new name, and then click Done. (You can also change the name of an event without opening the event editor by holding down the Option key while you double-click the event name.)
    To edit other characteristics of an event (for example, how often it repeats or whether it has an alarm), double-click the event. If necessary, click Edit to open the event editor. Make your changes.
    To delete an event, select the event and press the Delete key on your keyboard.
    If you’re changing an event to which you’ve invited other people, you need to send an updated event to the invitees by clicking Send in the event editor

  • I have bought key note for my iPad 2 can I used the same in my mac or I need to buy them for the mac

    I have bought key note for my iPad 2 can I used the same in my mac or I need to buy them for the mac

    Sorry, no. Different Apps for different operating systems.
    Stedman

Maybe you are looking for