I pad 2 will not air print, i pad 2 will not air print

cannot print from i pad got the right print

Is your printer an AirPrint-enabled one ? Those that are are listed on this page http://support.apple.com/kb/HT4356 - the page also has a small section at the bottom of it for 'No AirPrint Printers Found'

Similar Messages

  • TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

    Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

    This happened to me when I was setting up the wireless router for a friend.  The issue is with the Westall modem.  You need to go in and setup the "bridge" option on the westell modem.  The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
    http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
    Good luck
    Solution:
    Method 1 - Hard Reset
    Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
    After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
    Method 2 – Bridged Mode
    Access the Westell interface using http://192.168.1.254 or http://launchmodem.
    Click on the Broadband DSL Line button. 
    Click on the Protocols button 
    Select the radio button to the left of Option 2 (Bridge)
    Click the save button. Once the modem has restarted it is in bridge mode. 
    ALL STEPS COMPLETE

  • Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

    Products:
    HP Officejet Pro 8600
    Macbook Pro (Mac OS X, Version 10.7.5)
    Macbook Air (OS X, Version 10.8.2)
    Question:
    Why did my Macs initially print fine, but now will not print at all?
    Full Story:
    I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
    The HP Officejet 8600 was added to my network about 2 months ago.  
    I added a Macbook Pro and a Macbook Air about 3 weeks ago.  Both Macs printed just fine for about a week.  Then suddenly they stopped.  I spent about 2 hours on the phone with HP Service, and they finally said it must be my router.  So I called Netgear.  Netgear was useless!  They wanted me to agree to charges for services before they would even discuss the issue.  
    Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
    The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600.  The PCs print fine.  
    The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
    Please help, I appreciate any support.  
    As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
    Thank you,
    This question was solved.
    View Solution.

    Hi,
    More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
    First try unplugging the router for 30 seconds.
    Plug it back to the power and wait for 2-3 minutes.
    Turn the HP printer Off and back On, then check for any difference.
    If the same persists, try changing your router configuration as following
    Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
    Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
    Click the Advanced tab.
    Click the Setup option from the menu, then click on WAN Setup.
    Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
    Click the LAN Setup on the same Setup menu.
    Set the RIP Version as RIP-2 and Apply the changes.
    Reboot your router and then check for any change.
    I hope you may find that information useful, you may also use the user guide below for further information:
    http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • MacBook Air will not print on wireless Epson printer.  It says 'filter failed'

    MacBook Air all of a sudden will not print on wireless Epson printer.  The error message is 'filter failed'.  Shut down everything and rebooted, but still not printing.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Select
              /var/log ▹ cups ▹ error_log
    from the hierarchical list on the left side of the Console window. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.

  • I am planning to buy apple air mac book. i am not that technical will i be able to handle apple mac book. i am aware of using windows os but can i get software like that of notepad, word pad in os X lion. can i get partitioning in macbook,

    I am planning to buy apple air mac book. i am not that technical will i be able to handle apple mac book. i am aware of using windows os but can i get software like that of notepad, word pad in os X lion. can i get partitioning in macbook,

    Yes.  Switching to Mac might be overwhelming at first, but it is not difficult.  I Just started using Macs regularly about 9 months ago after using only Windows based pc's for over 15 years.  Macs come with TextEdit , but you can also purchase MS Office for Mac or use Apple's version, called iWork.Yes, you can partition the hard drive of a Mac.  Read these also: http://www.apple.com/support/switch101/, http://www.apple.com/support/mac101/.  With regular use of a Mac, you will be able to use it without even thinking about it, just like how you learned to use a WIndows pc.

  • My I pad will not print, but other I pad prints fine on same network

    MY I pad will not print, but other I pad works fine on same network

    Check the printer queue on the iPad by opening the multitasking bar.  If the Airprint icon is there, open it to see if a job is pending.

  • IPad will not connect to air printer

    Thanks Pedro I tried what you said but still will not find the printer
    I think it must be some thing that talktalk did when they fitted the you view box as it worked fine before I had the engineer out but they said they could mot find envy fault the laptop works fine and the Ipad still connects to the Internet but will not connect to the printer If I install ican print I can prin a photo but I cannot just print a document without a lot of messing obout I would just like to find the air printe like before I thought it might be a conflict with the booster unit tha they fitted to my TV
    Could it be that the booster has the same address any help would be fine

    Hi there, check out suggested solutions for this problem at this support document (about half way down the list)
    Best.
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Window7 profesional will not sync with air i pad

    mu windows 7 64 bit professional microsoft pc will not sync with air pad 7.7.5

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

    I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • HT4356 My iPhone will print to my air printer but my 3rd generation iPad will not.  It can not locate the printer.  Why?

    My ipone will print to my air printer but my 3rd generation iPad will not.  It can not locate the printer.  Why? Bother running on iOS 6.01

    Use this support document http://support.apple.com/kb/ht4356 to troubleshoot AirPrint.

  • The air printer was connected to my i pad but now it's not what's wrong

    I had the air printer connected to my i pad but for the past couple of weeks it's now not connected and I don't know how to reconnect, help

    Have you tried restarting your MacBook?
    Try resetting the SMC and PRAM
    SMC - http://support.apple.com/kb/HT3964
    PRAM - http://support.apple.com/kb/HT1379

  • My Macbook Air will not print wirelessly!

    My Macbook Air will not print wirelessly using the connection between it and my iMac which is connected via USB to my Canon Printer. The iMac and the Air are both using the same network and the printer is found on the Air... it sits at idle, but when I press "Print" on my Air it never actually prints. There is just a flash of the print icon on the Dock and then it is gone... I am left with no reason or error message. My colleagues are able to print wirelessly with no issue using their Macbook Pro and the same connected iMac. Can anyone help with this?
    Macbook Air: OS X 10.8.3
    iMac: OS X 10.7.5
    Canon Printer: ImageClass MF4370dn

    Hi JDP86,
    Thanks for using Apple Support Communities.
    If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.
    Use this article to troubleshoot printer issues in OS X.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Best of luck,
    Mario

  • Macbook Air will not find network wireless printer, ipad   PC print ok

    Deskjet 3055a printer on wireless connection to Virgin Superhub.
    ipad and a PC print ok.
    I cannot add MacBook Air (in same room) to the Network.
    Please help.

    Hi Dagnabit47,
    Welcome to Apple Support Communities.
    It sounds like there is an issue adding a wireless printer on your MacBook Air. The article linked below will walk you through the process of adding the printer and ensure the MacBook Air setup correctly.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    Add a Wi-Fi printer
    Follow the instructions that came with the printer to connect it to your Wi-Fi network and turn it on. Use the instructions to unpack the printer, install ink or toner, and add paper. For more information, see this article:
    Apple Support article: Connecting a Wi-Fi printer to your Wi-Fi network
    Choose Apple menu > Software Update to make sure OS X has the latest information about printer software it can download from Apple. If Software Update doesn’t list an update for your printer, you have the latest software.
    Open a document to print, then choose File > Print.
    Open the Printer pop-up menu and choose your printer in the Nearby Printers section of the menu. If you don’t see your printer, choose Add Printer from the Printer pop-up menu.
    A dialog appears listing printers on your local network. It may take a minute or two for your printer to appear.
    If you’re asked for an administrator name and password
    Select your printer when it appears in the list, and then click Add. OS X automatically uses AirPrint if your printer supports it, or it selects printer software (also called a printer driver) and downloads it from Apple if necessary.
    I hope this helps.
    -Jason

  • My MacBook Air will not print wirelessly to my Canon Pixma MX410

    I recently got a MacBook Air computer from work.  I have not been able to set up the wireless printing at home via my Canon Pixma MX410 printer.  I can get it to print from my MacBook Air if i connect it via USB.  and I can get the Canon to print wirelessly from my personal Dell Laptop. 
    No matter what I have tried: Downloading the Printer Driver MX410 Series 106702.pkg
    and still i get the same error.
    The Printer is not Connected.  I don't understand how that is, when i can still print from my other computer.  There is some setting that i do not have correct on the MacBook.  What do i need to adjust?  I can't seem to find where it might be in the System Preferences.  When i look at Network  It show's i'm connected to my home Wireless Network.  but i still am unable to print.
    Please help.
    Thanks!

    As you can see here, that particular Canon printer is not supported by AirPrint:
    http://support.apple.com/kb/HT4356
    More importantly, these directions should help in trying to set up your printer.
    http://support.apple.com/kb/HT3500

  • .pdf I opened on my Mac Air, Lion OS will not print

    Sometimes a .pdf will not print on any of my reliable printers.  The entire sheet remains white with no print at all.  I can't figure our why.  Any ideas?

    Hi TeresaMM, 
    Sorry to hear you are experiencing issues with the printer. I would like to help, can you describe for me what the printer is or is not doing. It sounds to me like it is not turning on but I could have misunderstood.
    You said you are using the printer with 3 Mac computers so I believe it is setup wireless, please confirm. When you say it doesn't work again, I wonder, do you get an error message on the computer you are printing from, or on the front screen of the printer, maybe blinking lights?
    Please elaborate on your description so that I can help identify the root cause and provide you with a solution.
    Looking forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Does Magic Mouse sleep when Mac sleeps?

    Just out of curiosity, when I put my iMac to sleep, does the Magic Mouse sleep, too? Or is the Magic Mouse still "on"? Message was edited by: Captain Maniac

  • Where the messages will be stored after syncing 58...

    Hi, Could you please tell me if there is anyway in which we can specify the sync location for messages? Because in options you can specify the folders with which Ovi can sync photos, Videos etc... but there s no such option for messages.. today i syn

  • Using Flash Video Encoder Programmatically

    Is there a way to use the Flash encoder programmatically from Action Script or command line? I am looking at developing a batch process that compiles a list of files to be encoded into FLV for later consumption.

  • Applescript in Final Cut Server

    Hi all, I am trying to get an applescript running from the final cut server. I wrote a script to replace all underscores and spaces in the filenames of a specific folder. I've tested it local and it works like a charm. But when I attached the script

  • Online number is different between call-in and cal...

    I have an online numer: xxxxxxxxxx. When I call out, the phone number shows the online number is xxxxxxxxxx. How can I contact with www.skype.com customer service to solve this problem. Thank you.