I phone 4s problem with sofware not connect wifi

please,!!! 
now i got a new iphone from shop But when i open the mobile i found ,
It not connect a wifi..change and change again.

Hello there Mai Siri,
Heres a great article for troubleshooting wifi connections on your iPhone. Called iOS: Troubleshooting Wi-Fi networks and connections it can be found here http://support.apple.com/kb/ts1398.
Start here, and work your way down as necessary.
Many Wi-Fi issues can be resolved by doing the following:
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
Regards,
Sterling

Similar Messages

  • My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    settings - general - reset - reset network settings.

  • I have a problem with Safari not connecting on my IPad with WiFi

    IPad 3 or 'new IPad 'with cellular data. I have a problem with the WiFi not working more than a couple of times.  When I check settings the connection is still showing as strong.   To regain access to the Internet, I have to turn  the WiFi off and then back on.  Then it will work a time or two and stop again.  I don't want to have to use my data plan when I am sitting right beside the router.
    The WiFi signal is good, I have two laptops in the house that have no problem running on it with no interruptions.
    Appreciate any help you can supply!

    THanks, I tried all those and it is still the same erratic connection. 
    I also located the below  information,  and it didn't fix it either.
    To reset the iPad's WiFi connection, simply use the option at the top of the screen to turn WiFi off. All of the WiFi settings will disappear. Next, simply turn it back on again. This will force the iPad to search for the WiFi network again and rejoin.
    If you still have problems, you can renew the lease by touching the blue button to the far right of the network's name in the list. The button has a ">" symbol in the middle and will lead you to a page with the network settings.
    Touch where it reads "Renew Lease" towards the bottom of the screen. You'll be prompted to verify that you want to renew the lease. Touch the renew button.
    This process is very fast, but it could correct some problems.

  • I have HP LaserJet Pro M1536dnf Multifunction Printer and my problem with eprint "Not Connected"

    i use eprint but after day show in site massage state Not Connected
    to solve this problem turn off printer or hp web services and tern on and it work 
    but same problem after some hour  show not connected
    how can printer connected all time ?

    Hey sfareg,
    One thing you need to check is if your internet connection is intermittent. If it is not, you can follow these steps to give the printer a better connection.
    1. Find your printer's IP address by printing a network configuration page.
    2. Type you IP address into the address bar of your web browser.
    3. Click on the network tab at the top of the page.
    4. Look at the left hand side and click IPv4 under wireless.
    5. Change the IP settings to Manual.
    6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
    7. Set the Preferred DNS to 8.8.8.8.
    8. Set the Alternate DNS to 8.8.4.4.
    9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
    The printer should have a better connection now.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Anyone know of problems of ical not connecting to iCloud -- and thus not to the iphone?

    does anyone know of problems with ical not connecting to icloud and thus not to the iphone?
    thanks,
    consel

    On the iPhone tap Settings > iCloud
    Make sure Calendars is swtiched on.

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

  • When I go to watch a show or movie that I purchased, it will not load.  The "loading" screen comes up but it just sits there.  There is no problem with my internet connection.

    When I go to watch a show or movie that I purchased, it will not load.  The "loading" screen comes up but it just sits there.  There is no problem with my internet connection.

    Hi, did you resolve the 200453 error? I've got the same one and can find very little in the way of information to lead to resolving my issue

  • Problems with n97 apps connecting to network (Voda...

    Problems with n97 apps connecting to network (Vodafone UK – 3G)
    Recently a number of my apps which used to connect automatically to the internet (which ever was available – known wi-fi or 3g) have stopped doing this.  They now only connect to one known wi-fi.
    I’ve tried uninstalling and reinstalling each app, but this hasn’t solved the problem.  I’ve checked for software updates and do not believe any have been applied or are available.  All apps have been downloaded via Ovi on the phone.  I still am able to access the internet by the web browser which was installed on the phone and via google maps (which also still manages GPS position, search, etc).
    The apps which I notice causing a problem are:
    Sainsbury’s/nectar
    Tesco
    Map my tracks
    Snaptu
    Opera Mini
    Any one got any ideas???

    I have the same problem since i updated my mac to 10.5.6.
    Each time I have to do a diagnostic and retype the WEP password to have the internet connection.

  • Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

    Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
    You are likely to get poor connections and dropping out.
    If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
    There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
    http://forumhelp.dyndns.info/networking/powerline3.jpg
    I will monitor the subject line of this thread, should you want to post any more information.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Strange problem with the internet connection

    Hello,
    I've a strange problem with the network connection , I have bought a Iphone 3g in Italy in date 31st
    October 2010. Now in Italy I have just subscribed a telephone rental with Wind company, where there is an unlimited internet service. The problem is that in my Iphone there is not the line.
    All this is strange because I receive the messages from social networks (like facebook and msn) but I cannot open tha page for the internet connection. I have gone to Apple store and I have tried to put my SIM in an other phone (iphone 3g or 3gs): my SIM is perfectly working.
    The problem is only for the internet connection on my phone because wifi connection is good.
    Thanks!!

    Please help everyone who has the same problem by posting yr solution, thx!

  • When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

    When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

    Hi sarahdavis0_o,
    Welcome to the Apple Support Communities!
    If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • Both xp and windows 7 have video problems with my VGA connection using TV

    both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

    To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on  your router, right click on it and select "Map network drive" and click on finish.
    Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

  • Language problem with my jdbc connection

    Hello,
    i'm having a problem with my jdbc connection.
    the problem is that i'm connecting to MS- Access db the have arabic tables, and columns, it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not work and it gave me an exception.
    i'm using netbeans 6.1 IDE, and the exception is
    java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect
    at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
    at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
    at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3110)
    at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
    when i printed the select statement and the exception it gave me:
    SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; [Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
    the question marks are very weird to appear!!!!!!
    here is the code:
    public void edu_branch() {
            sucpy = 0;
            eflag = 0;
            asql = "SELECT [\u0643\u0648\u062F \u0627\u0644\u062C\u0627\u0645\u0639\u0629], [\u0643\u0648\u062F \u0627\u0644\u0643\u0644\u064A\u0629], [\u0643\u0648\u062F \u0627\u0644\u0642\u0633\u0645], [\u0643\u0648\u062F \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629], [\u0627\u0633\u0645 \u0627\u0644\u0634\u0639\u0628\u0629 \u0628\u0627\u0644\u0627\u0646\u062C\u0644\u064A\u0632\u064A\u0629], [\u0627\u0644\u0643\u0648\u062F \u0627\u0644\u0645\u062E\u062A\u0635\u0631] FROM EDU_BRANCH;";
            Connection connection;
            Statement statement;
            try {
                Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                connection = DriverManager.getConnection("jdbc:odbc:info");
                System.out.println("Connection to Access file is created...");
                statement = connection.createStatement();
                statement.execute(asql);
                System.out.println("Executing query : " + asql);
                aset = statement.getResultSet();
                if (aset != null) {
    //------------------------------Oracle operations--------------------------------------------------------------------                  
                    while (aset.next()) {
        can you help me please

    arabic language
    SELECT [??? ???????], [??? ??????], [??? ?????], [??? ?????], [????? ???????????] FROM EDU_DIVISION; >[Microsoft][ODBC Microsoft Access Driver]COUNT field incorrect.
    the question marks are very weird to appear!!!!!!It failed to understand your unicode sql.
    it was working fine on a windows XP environment prepared for arabic language, but when i had to move to windows vista it did not workStrange. Maybe you need to compare the differences of some system properties on both hosts, for instance, sun.io.unicode.encoding, file.encoding, user.region, and so on.

  • Has Apple fixed the problem with 4G cellular connection?

    Has Apple fixed the problem with 4G cellular connection on the iPad 3?

    Cellular connection problem was for US connection in Houston, Texas.  Have an iPad 2 which functions perfectely on Wi-Fi or 3G.  Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection.  Purchased on with the AT &T cellular.  Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all.  Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all.  Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service.  Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's.  Didn't seem to matter if it was AT&T or Verizon.  So I decided that I would just return the unit and wait for Apple to fix the problem.  Hence my question.
    Appreciate very much your time in responding to my question.

  • Organizer elements 11.  Problem with your internet connection

    I am trying to access facebook and Flickr via the Organizer with elements 11.  I went to preferences and cleared the oline services, when I try to refresh the partner services I am greeted with the error " there is a problem with your internet connection, check your firewall settings" .
    Windows 8, updated.  I tried disabling the firewall.  I have also tried making sure permissions are set up to allow all adobe products access through the frewall when it is enabled.   No other network managment services or virus scanners installed.  just default 64bit windows 8.
    I am currently left with no partner services; facebook, flicker, picasa, etc....   I could reinstall organizer i guess to get the default services back...
    I found discussions on the web but none with a solution. http://forums.adobe.com/message/4035670
    Any help would be great

    I apologize for the delay.  An update was released shortly after I posted the question that resolved the issue.  Thank you for your assistance though.  As soon as I read your advice I went to my laptop to follow your instructions.  Upon opening photoshop I was prompted with an adobe update message.  After the update the issue was resolved.  Again, sorry for not updating the situation.

Maybe you are looking for

  • Message Mapping Question

    Hello, I need some help for a message mapping. In the source message is one element named options. The value of this field is semicolon and bracket/comma separated value. e.g. skip;ignore;retry(1,2,3). Each one of the semicolon separated values shoul

  • Unicode characters are not inserted in database properly

    Hi all, Iam developing an application that takes entries from text boxs and inserts them in database , When i try to write in language rather than english (i use arabic) the fields are inserted but as ?????? in the database fields , i checked the cod

  • Bind variable and parameter problem

    Hello, I'm migrating a complex report from Oracle Report to BI Publisher. Now I have some problems with the bind variables. In order to explain the question clearly, I simplified the code as below. The value of e1 and sum1 can be generated correctly.

  • Need to upload employee photos against infotype 0002

    Hi, We have an urgent reqirement to load the photos of all the employees agianst the infotype 0002 which need to be accesed by the employees and managers via enterprise portal. Can anybody help me.... Thanks in advance Krishna

  • Cannot save certain files due to program error

    Certain JPG files refuse to allow me to save them.  I get a "could not complete your request due to a program error". Searching for this got me results that assume the problem was all the time; things like re-setting prefs and such.  I tried that too