I play games on Yahoo. Since my last upgrade (3.6.12) I log into a game room, but do not get the window, even though it indicates I'm in there

I know I am logged into a specific game room, because it registers on the board information and I can hear other players enter and/or leave.

All I am getting from iTunes is an automatic reply.
This has been going on since September and the iOS 6.0.1 update. I have been bumped from Times of London to iTunes and back each saying it is the others problem. iTunes is the final auto response after their several suggestions is to go to the creator of the app which does seem to make sense.
It is a bizarre problem. All is okay for about three weeks then I am not allowed into my downloaded copy. If I try to go into a page on the paper which at that point I can see, I get bumped out with a message that a subscription is not available.  The app has been re-downloaded (several times from iTunes Canada).
Nothing seems to work. I didn't have a problem with my subscription previously. Have had the paper for several months with no problems.
I have tried to get this message to those who might be able to do something but come up against a brick wall of automated responses.

Similar Messages

  • When playing games on facebook, I often get the message "virtual memory too low, is being increased" Is there something I can do to clean out the "virtual memory" to avoid this?

    As mentioned in my question above, it happens usually during playing games. I wondered if there were someway to clean out the virtual memory, as opposed to it "increasing" continually and overloading my memory in general. You are speaking with a computer novice for the most part, so I am unfamiliar with a lot. I do do updates and general maintenance on the computer, but is that enough for this issue?

    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r45
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Physical memory is the memory that is installed on your computer as real memory. To be able to run programs that require more memory and more programs at the same time (via time sharing and task switching) it is also possible to move (swap) currently not needed code and data to disk to make room for other programs and data. The total memory available for programs is the Virtual Memory.
    You can check the Virtual Memory settings here: Control Panel > System > Advanced > Performance > Settings (Advanced tab)<br />
    Windows can manage more memory then is physical available and that memory is stored in a page file on your hard drive.
    If the size of that file is not large enough and all available memory is in use then you get the Virtual Memory is low warning.
    Make sure that you have at least 1 GB or the recommended setting for the Virtual Memory.
    If you have less than 1 GB physical memory installed on your computer then if possible add more memory.
    http://support.microsoft.com/kb/555223 - RAM, Virtual Memory, Pagefile and all that stuff

  • I cant update my game, app store says not enough local memory even though i still have 3gb available

    Pls help

    The iPad need storage space to operate.
    Go to: Settings>General>Usage>Delete stuff you don't want.

  • I have the latest itunes and I've just purchased a season from a series but I cannot the episodes even though they seem to be downloaded. I'm going to the purchased section find the episode and pre play but it only comes up with the 30 sec trailer.

    I have the latest itunes and I've just purchased a TV series but I cannot watch the episodes even though they seem to be downloaded. I'm going to the purchased section find the episode and press play but it only comes up with the 30 sec trailer rather than the full trailer.. any suggestions?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • Is airdrop is avaiable on iphone4g n how to use airplay ... n something playing game like sufers subways its get stuck middle .. y is it so .. help me out..

    is airdrop is avaiable on iphone4g n how to use airplay ... n something playing game like sufers subways its get stuck middle .. y is it so .. help me out..
    n which is best app to saver battery life... n how to make ma phone run smootly..
    pls help me >>>
    <Email Edited by Host>

    Hi ChrisBell,
    my Pixi shows me the missed calls in a list of its own? I don't have many, so maybe I'm missing something. But I agree with your half-ranting to some degree. As a long-time Palm-user (my last phone was a Treo 680, terrible form factor, good UI), I am really disappointed with the standard software on this phone. Memos and Tasks, which AFAIK were there and useful even on the first Newton's, have regressed beyond the point of usefulness now (solution: Toodledo and Done!, at least for now).
    But ChrisBell: if you feel up for it, you could start tinkering. Many people love these phones so much they have started developing patches to solve the obvious problems skimmed over by developers. Try looking up "webosquickinstall" and "preware", and you will find over 300 patches and a lot of free software to help you out. I am not a computer wizard myself, but I am not scared of them either, and I have been able to make good use of all these extras made available by the community.
    just a thought, might help you out on a few of your half-rants

  • OK FIREFOX WILL NOT LET ME DO ANY THING I LOG INTO MY MAIL N I CAN NOT OPEN IT,DELETE ANY OF IT, I CAN NOT PLAY ANY GAMES NOTHING WHAT IS GOING ON

    OK FIREFOX WILL NOT LET ME DO ANY THING I LOG INTO MY MAIL N I CAN NOT OPEN IT,DELETE ANY OF IT, I CAN NOT PLAY ANY GAMES NOTHING WHAT IS GOING ON

    See these: http://malwaretips.com/blogs/remarkit-virus-removal/
    https://www.youtube.com/watch?v=w36xK_4PiO8

  • HT201210 my i phone keeps turning off and turning back on cant play games because it turns off in the middle

    my i phone keeps turning off and turning back on cant play games because it turns off in the middle

    Which jailbreak are you using?

  • HT4623 I want to update my ipad 2 but I do not get the notice to update software on my ipad under settings general.  I have not done any updates since I purchased the ipad last august.

    I want to update my ipad 2 but I do not get the notice to update software on my ipad under settings, general.  I have not updates since I purchased the ipad.  Please help.

    You have to be running iOS 5 in order to update via the iPad settings. You are running 4.3. You will have to update via the latest version of iTunes on a computer. After you update to iOS 5.1.1, you will be able to do OTA updates from the settings on the iPad.
    How to update your iPad
    http://support.apple.com/kb/HT4623

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

    After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    Just to make sure, open Mac App Store and click Purchases. Can you pause the download and restart it?

  • HT4009 I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

    Hi Dave_warr,
    I would suggest restarting the iPad and see if the download resumes.
    iTunes: How to resume interrupted iTunes Store downloads
    Resuming downloads from an iOS device
    From the Home screen, tap the iTunes icon.
    For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
    Enter your account name and password.
    Click the "OK" button.
    Click the Resume or Resume All button to start the download.
    If you don't see the application to download it, then follow these troubleshooting steps:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If the app does not appear in your list of purchases, then contact the iTunes Store for help:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    I hope this information helps ....
    Have a great day!
    - Judy

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • I have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?

    i have a psts on my mac and the time stamp hasnt changed since i added this to the mac even though they have been imported?
    where is the data stored when i moves messages to the imported pst?
    after serval months of rebuidling and creating new identites for Outlook for mac2010 any reasons why this is constantly happening?

    I am not sure what you mean by this.
    is it ok to delete outlook ID's copy/backup as running out of space?
    If you mean you have several identities in the Office Identities folder then yes. You can delete whatever you don need\want except for your current.
    Are you updated to the latest version of Office?
    After the restore, navigate to ~/Documents/Microsoft User Data/Office 2011 Identities/your identity and delete the file called Database. Then rebuild.
    This may help:
    http://www.officeformachelp.com/outlook/troubleshoot/

  • TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem

    I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem to be t

    There are only two things that you must do to connect a device to calendars:
    1)  In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
    2)  Turn on calendars on the same page.
    You said that the iphone 4 and ipad **used** to automatically sync.  Do they no long sync?

Maybe you are looking for

  • Unable to change keyboard layout for all users on Windows Server 2012 R2

    Hi, I have a requirement where I need to support national keyboard layout for Danish for all users on that machine. When I ran the powershell with script Set-WinUserLanguageList -LanguageList da-DK it only sets the Danish keyboard layout to the speci

  • Photos in album with iWeb

    I opened a page album, and tryi to drag photos on it (from iPhoto) but doesnt stay!! So can anyone tell me where I should drag these photos? Thank you

  • Screen becomes scrambled

    Since the most recent update my Mac Pro's cinema 24 inch display becomes all scrambled when safari or any other browser is open. The issue is usually preceeded by some flickering of flash adds on any given webpage. If I shake the window, everything g

  • Inserting checkbox into a APEX select list

    After aloooottt of time spend in google and script foruns, i found a way to transform the simple APEX select list into a multiselec combobox with checkbox inside. Its working prety cool, and its not so hard to implement. I´m sry if someone alread pos

  • Custom code life cycle management (CCLM)

    Hi Gurus , At this moment i'm working on Custom code life cycle management concept in Solution Manager. If any one worked on this one previously can you please send me complete document. It's Urgent Plssssss Thanks in Advance... Vijay R.