I put firefox 4 on my computer but had to remove it since it did not allow the Norton tool bar which identifies safe and dangerous sites. will that featurre be available
The norton tool bar feature which identifies problem sites
(safe web) is a good tool and has saved us from many problems.
From past experience I feel it is something I must have.
I loaded firefox 4 and while I like the program I removed it
because of the lack of that feature but would like to use FF4.
That's not good enough, Tony! Firefox should have let me know before I downloaded the firefox 4. Now I can't go back to the 3.6 or what ever it was. I have gone back to IE until FIREFOX resolves the issues of compatibilty with Norton. I love my norton and will not go without it for even one day!
Adios!
Similar Messages
-
Like I said, I downloaded Firefox 4 and immediately noticed that it did not allow my Norton 360 Identity Safe to recall my user names and passwords. I want to know why and if that can be fixed????? I removed it completely and reinstalled the previous version I had (3.6 ??) and my Norton functions now work. What's up with that?
Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
-
My MBP was runnning unbelievable slow, I need to re-install fresh Lion, but when I upgraded to Lion, I did not got the disc or thumb drive. What should I do?R
Instead, you could restart holding the Command and R keys, which will start up on the Recovery partition Lion creates, and then restore the operting system on the main partition.
Before doing anything like erasing the startup drivek maie sure you have an external drive with a backup copy incase things go badly. -
The tool bar line has suddenly disappeared and cannot print or check history. Also, bottom tool bar has disappeared so cannot see clock, shift to other programs.
Only happens with FireFox. If I access any www site via FireFox, same problem. I have re-booted several times, same problem.
MS 7 Prof OS
Dell LatitudeUpgrade your browser to Firefox 8 and check
* getfirefox.com -
Firefox 15 not compatible with Norton Tool bar, is there going to be a fix?
When will you fix this problem with Norton's Tool Bar compatability? I use this feature all the time.
I had Firefox 18 that crashed with Windows 8, and I also had my Norton toolbar. However, I removed 8 and installed back 7 (Windows), and Norton disappeared. Therefore,I went to Firefox 15 and my bar was back. It was back for the past 2 days, and now it is gone, out of the blue. I have the new Comcast Norton 360 and it has been updated - but my bar is gone. I want my bar and it is the only bar for privacy that I trust. I prefer Firefox 18, if I can have it with my Norton bar. Any ideas? I am not able to go to add on's and click onto "enable" because it states that it is incompatible with Firefox 15, therefore, there are no enable or disable buttons. What is going on?
-
I need help asap so i can put the vids on my computer so i can delete them off my ipod.
Copy them to the computer
-
I bought some movies via itunes how do I take it off my computer and add it to the icloud?
Are you in a country where films can be redownloaded - the page that you posted from should list countries and where the different content types can be redownloaded. But even if you, not all countries have agreed to allow their films be redownloaded, and there is no guarantee that a film (or any other item) will remain in the store, so you shouldn't rely on being able to redownload them. You also can't add films and/or tv programmes to the cloud, whether an item appears there depends upon your country, the film studio, and if it remains in the store.
If you are in a country where films can be redownloaded, and those films are still in your store, then if they don't show in the cloud check to see if they care hidden : http://support.apple.com/kb/HT4919 -
I am having a terrible time moving, saving and opening pictures and links from one place to another when on facebook. I bought a subscription but the computer I wanted to using the it on does not have enough space can I still download to a different computer without being charged??
I bought a subscription to adobe that I hope will allow me to open files
-
What is the current software version for an older ipod Touch? We have 4.2.1, which Apple Store says is not the latest.
ThxiOS 4.2.1 is the latest and last version for the 2nd-generation iPod touch. If iTunes isn't showing any further updates for your iPod, I'm guessing that's the model you have. You can confirm here:
http://support.apple.com/kb/HT1353
Regards. -
When I received notification (about a week ago) to install the latest update to Firefox, the update stated that I would lose the Norton Tool Bar with the installation of the update. The issue is that I use the Identity Safe feature in the Norton Tool Bar for the majority of my logins. To lose this feature would be a hardship. Is there any way I can maintain the Norton Tool Bar?
When I received notification (about a week ago) to install the latest update to Firefox, the update stated that I would lose the Norton Tool Bar with the installation of the update. The issue is that I use the Identity Safe feature in the Norton Tool Bar for the majority of my logins. To lose this feature would be a hardship. Is there any way I can maintain the Norton Tool Bar?
-
i was deleting a few programs in an effort to delete something that was attached to firefox - and extension.
I must have deleted the part of the navigation tool bar that show a blank space for one to type in a web address or copy and paste a web address.
When I right click at the top of the page I get the navagation tool bar - a space comes and goes with the clicking unclickin of that tool bar.
I have looked all over for that but can't find it.
any help would be appreciatedoops!
first, open up what you have left of the toolbar.
now, right click on it and choose 'customize'. You should see something called 'location' in the box that comes up. Click on it and drag it to where you want it on that tool bar. You can also click and drag around other items on that toolbar to replace them, or move them as needed. :) -
Purchased albums but the last song did not complete the download.
I purchased 2 albums from the Itunes store and on each album there is a song that did not complete the download, it was stuck at 100% and wouldn't clear, just froze. I shut down Itunes and went back into it and the two songs aren't in my library but when I go to the website to try to redownload them it shows they were purchased but it won't let me restore them. My main concern is both were album only song so it may be difficult to get them without redownloading the entire albums. Is there a way I can get these songs without paying for them again?
Hi there philk11,
You may find the information in the article below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
-Griff W. -
Is Norton Tool Bar supported by any Firefox version(s)?
I previously used some of the lower numbered versions of Firefox. The versions which I have used didn't support Norton Security; especially '''Norton Tool Bar.''' Are there any versions of Moxilla Firefox that DO support the Norton Tool Bar with its "Identity Safe" feature?
Thank youNorton supports Firefox 10, for details see this article from Norton support - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-10-Support-for-Norton-Toolbar/td-p/648241
-
Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.
See:
* http://kb.mozillazine.org/Browser_will_not_start_up -
I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.
I have used PCs for years, and still do at work. But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself). It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI. I have no experience with Win8. Here are my thoughts:
1) You can get a good computer using either a Win8 machine or a Mac.
2) You will pay less for an equivalent PC. But not as much less as some would have you believe. You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display. And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
That said, I think some things are easier on the Mac. For example, GarageBand is a standard part of the Mac SW installation. I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap. I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way). You can do the same on a PC, but you have to purchase the SW from somewhere. And, it probably isn't cheap.
I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
I would not return to a PC for my own use, given a choice. But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
So, there you go.
Maybe you are looking for
-
WC27 - Single Item, Single Level(?)
Hello, I would just like to ask if there is a way in transaction WC27 (for MRP Batch Run) to only run Single Item, Single Level Materials during processing? I ask because I have a requirement (in addition to filtering material codes) to only run sing
-
How can I do to my camera works in a macBook
I have a MacBook and my camera its not working, how can I fix it.
-
IPhoto recognizes my iPhone, but not the photos on it.
The iPhone is a 3gs running iOS 5.1, the iMac is running OS X 10.6.8. When I connect the iPhone using USB, I open iTunes and it Syncs automatically. I have to manually open it, and iPhoto too. When I open iPhoto, it shows me the phone but with 0 pi
-
Small questions on VMS 3.01
Hello! Basic questions: 1. What to do if one of my guests has stuck in stopping state? It appears locked and I can't do any action with it. I can but do not want to restart my VM server. What to do? 2. I had succeed to install OEL 5.6 in PVM mode. Ho
-
SQL Server 2012 is prompting wrong message while creating new instance.
Summary: While performing two task simultaneously 1) deleting existing SQL Server 2008 r2 instance 2) Creating SQL Server 2012 Instance. I received wrong message. Explanation: I have SQL Server 2012 setup in my server. By mistake I created SQL Server