I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

What exactly is the error?
And, we'd need some info re. your Mac model and OS version - you are not running iOS on it.
You need to realize that this model has been discontinued and the last driver updates are dated about a year ago. If you are running Mavericks, there may not be an updated driver for it. But you can try to delete the printer and add it again to see if that will work.

Similar Messages

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

Adobe Photoshop Elements 10 does not recognize Epson Artisan 837 printer

Just purchased Epson Artisan 837 printer. Had been printing out of Photoshop Elements 10 (on Windows 7) fine at first, after printing 5 photos the next time I tried to print I received message "No compatible WIA devices detected....
What could be my issue?
My husband uninstalled and performed a clean install on the printer, it worked as above and now I'm in the same situation again.

Thanks Garry.....
I found out something interesting. Apparently when Adobe changed from using
Twain to WIA the program (which began with ver. 10; I've used Adobe for
awhile and have had previous versions) the ability to scan via adobe with
some printers has diminished.
I now have yet another step to do to scan...
Scan with printer software, save to hard drive, then open Adobe and work
with the scanned file and save to appropriate file on hard drive.
I had an HP e-printer (all-in-one) prior to this Epson Artisan and it was
having difficulties also and I never figured out why, that's why we bought
the Epson.
Which is OK, because the I didn't like the HP all that much anyway.
Thanks for taking the time to contact me about this...I've not used forums
much.
Appreciate the help,
Lesleigh

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

I use my own color profiles from Photoshop CS6/Mac Pro - how do I turn of Epson Artisan 837 printer color management?

Choose Photoshop Manages Color in the CS6 print dialogue. At the top, click the Print Settings button and disable any color management settings for the printer.
Edit: Correction, that's CS6 in Snow Leopard. In Mountain Lion, if you check the print settings, color management for the printer should automatically be disabled when using Photoshop Manages Color.

Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

Whenever i have a mozilla browser on and i try to open another mozilla window browser it work pull up a new window. When close the browser that was on, it will still show up on Task Manager. Whats going on with this?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I have an iPhone 4S and I cannot get the iMessage feature to work. I've done the fix that was online and it still won't work.

I need help getting the iMessage feature to work. I've done the fix that is shown online several times and still cannot get it to work. Are there any other suggestions out there to fix this problem?

HI,
What was "the Fix" ?
Where was it On Line ?
So your iPhone is on a Wifi network ?
You have gone to Settings > Messages and Enabled Messages.
You cannot then send iMessages from your iPhone Number ?
You should be able to sent to other iOS devices that are using other iPhone Numbers or Apple IDs or to Macs that are running Messages with the iMessages account enabled and those may also be using iPhone Numbers or Apple IDs depending how they were set up.
On the iPhone in Settings > Messages you can then add an Apple ID
You can then chose to Send from the Apple ID or iPhone number as the Start from option.
Adding the Apple ID links the Apple ID and iPhone Number and if you have a Mac, and are running Messages with the same ID, they will sync (Display on all Devices) all the subsequent iMessages you receive.
9:27 pm Thursday; December 26, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT4356 Epson Artisan 837 will not print from IPhone

I have an IPhone 5 and an Epson Artisan 837 printer. When I attempt to print from my Ihone 5 I always receive an error message:
"out of paper, paper jammed, or incorrect paper size".
In reality,it is none of these things. I can print from my IPhone 5 to my Brother printer via the router connected to my computer, but the Epson is via WiFi/AirPrint.
Someone tried printing from their IPhone 5 to my Epson and it worked perfectly, but it WILL NOT PRINT FROM MY IPHONE 5.

Try GutenPrint:
Click here to begin autodownload: http://tinyurl.com/8ctlaw.
You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
Click here to begin autodownload: http://tinyurl.com/9mgm38.
Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
Here's a link to Foomatic-RIP:
Click here to begin autodownload: http://tinyurl.com/4ep5dv.
Finally here's a link to HPIJS:
Click here to begin autodownload: http://tinyurl.com/ayhp9z.
You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
<Edited by Moderator>

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes how do I make the layers and tool bars bigger? Please help@

Windows will scale applications display or windows will not scale application display depending on how the application is coded. Photoshop is coded in a way that its display is not scaled by windows. Photoshop knows about your displays high pixel count not its resolution so it uses its pixels however it does not scale its UI to make it usable on your display. Other application let Windows scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels. The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays 2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
The reg update and external manifest file effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution. Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768. Photoshop UI would not fit on the Surface Pro 3 display..
Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display 3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

I purchased a full album and as it was downloading it stopped out of nowhere and all the music that was downloading said download error. Tap to retry. So i taped all of them then it said it couldnt be downloaded at this time. Its been like this for 2 days

I purchased a full album and as it was downloading it stopped out of nowhere and all the music that was downloading said download error. Tap to retry. So i tapped all of them then it said it couldnt be downloaded at this time. Its been like this for 2 days. Help me!!!

Have you tried redownloading on computer and syncing?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK

Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Communication error with the opmn server local port

Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help.

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Sharepoint application pool suffered a fatal communication error with the Windows Process Activation Service

I am using form based Sharepoint servers and received below error. Is there any way to solve this?
Sharepoint 2010 in Windows 2008 R2 Server.
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '11516'. The data field contains the error number.

I don't see any number provided in the event log. I got this through Sharepoint diagnostic tool. below is the log.
Log Name: System
Source: Microsoft-Windows-WAS
Date: 12/17/2013 5:16:34 AM
Event ID: 5011
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: 525531-WEB03.dfw.intensive.int
Description:
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '8180'. The data field contains the error number.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WAS" Guid="{524B5D04-133C-4A62-8362-64E8EDB9CE40}" EventSourceName="WAS" />
<EventID Qualifiers="32768">5011</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-17T10:16:34.000000000Z" />
<EventRecordID>23515</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>525531-WEB03.dfw.intensive.int</Computer>
<Security />
</System>
<EventData>
<Data Name="AppPoolID">Sharepoint-2</Data>
<Data Name="ProcessID">8180</Data>
<Binary>6D000780</Binary>
</EventData>
</Event>

I am using an epson artisan 835 printer wifi compatible is it also capable to use with my iPad? How do I set it up to print documents from my iPad?

I am using am Epson Artisan 835 printer, wifi compatible . Is it also capable to print (AirPrint) from my ipad? Where do I get an email address for my printer?

See here for Airprint-capable printers: http://support.apple.com/kb/ht4356
Your printer isn't on the list but you may be able to print with Epson's app or other print apps from the App Store.

Cannot print from Aperture v.2.1.2 to an Epson Artisan 800 printer

I recently purchased an Epson Artisan 800 printer and I would like to be able to print from Aperture. Unfortunately, I have been unable to do so, in spite of multiple conversations with the Epson support group. I am able to print from other applications, such as TextEdit, Safari, and iPhoto. However, when I try to print from Aperture, I never get any output from the printer. Depending on the image that I try to print from Aperture, I will see an error message flash on the printer's display screen.
I captured the following error message from the "system.log" file:
Jan 20 20:11:24 new-host Aperture[12196]: An instance 0xce644a0 of class RKPrintPreviewView is being deallocated while key value observers are still registered with it. Observation info is being leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:\n<NSKeyValueObservationInfo 0xf86da40> (\n<NSKeyValueObservance 0x1c6597e0: Observer: 0xb8c7d10, Key path: selection.isModified, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c641630>\n<NSKeyValueObservance 0xce9b170: Observer: 0xb8c7d10, Key path: selection.gamma, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0xce7e7d0>\n<NSKeyValueObservance 0x1c659830: Observer: 0xb8c7d10, Key path: selection.blackPointCompensation, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c640340>\n<NSKeyValueObservance 0x1c65ef80: Observer: 0xb8c7d10, Key path: selection.colorSyncProfile, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c65d8e0>\n<NSKeyValueObservance 0x1c65d890: Observer: 0xb8c7d10, Key path: selection.dpi, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c6715c0>\n<NSKeyValueObservance 0x1c65eba0: Observer: 0xb8c7d10, Key path: selection.sharpenAmount, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645070>\n<NSKeyValueObservance 0x1c65ebe0: Observer: 0xb8c7d10, Key path: selection.sharpenRadius, Options: <New: YES, Old: NO, Prior: NO> Context: 0x0, Property: 0x1c645630>\n)
----------END of ERROR MESSAGE------------
I am having this problem on both my iMac G5 and my wife's MacBook. Both are running the latest versions of Mac OS X (10.5.6) and the latest version of Aperture.
If anyone has been able to print from Aperture to an Epson Artisan 800 printer, please let me know how you did it. Thanks.
Bruce

I run 10.4.11 and am unfamiliar with that specific Epson. However step one with Epson troubleshooting is to do any OS updates then download and install the latest Epson driver, even if what you are using is current. The new install will simply install over the old installation. Repair Permissions via Disk Utility immediately before and again immediately after both the OS updates and the printer driver installation.
Once good Epson paper and a new driver installation are done the final step is to carefully follow Gary Ballard's excellent color management tutorials:
<http://www.gballard.net/psd.html>
Good luck!
-Allen Wicks
P.S. Epson tech support for consumer printers has always been worse than useless. Specialized support for the pro printers is pretty good.

Error message "auto duplexer is not installed" after a paper jam was removed on my epson artisan 837.

I print from a Macbook Pro (April '09) OSX 10.9.3 to an Epson Artisan 837 duplex all-in-one which has been functioning perfectly for some time. The other day while duplex printing I got a vague error message to the effect "printer error, turn off machine and power back on." I repeated that process several times waiting a period of time and/or doing it speedily. I even unplugged the printer from its outlet, turned off the computer, waited overnight and tried again, all to no avail. I then found the back tray had a paper jam which I removed and replaced the tray. Since this ordeal I have NOT been able to use the duplex function. After apple's air-print, an Epson Customer Service person told me to add a printer in Systems, printer preferences and to simply add in the same printer (only one i have) but choose not to have it be air-print. This worked even though it gave me Epson Artisan 837 and Epson Artisan 837II (the first with air-print the second not). I must be missing some step this time, however, because although I now have essentially 2 printer choices, the Epson II has duplex printing choices grayed out and gives me the error message "auto duplexer is not installed." Sorry to make this so long, but can anyone help me with this problem?

Thank you. Those are beautifully written procedures.
Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
You must enter the following URL, you must use the Queue Name you noted down earlier
http://<IP address of Mac>:631/printers/Queue Name
which I do, entering
http://192.168.0.4:631/printers/MP830
and I get the following error:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
And then I am toast!
Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
Not sure where to go from here -- any ideas?
The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
TIA...

I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

Similar Messages

Maybe you are looking for