?? I thought there was a mac-mini, DVI to RCA /S-video adapter. If no, can I get 37.5mhz on display to composite video out?a composite video
?? I thought there was a mac-mini, DVI to RCA /S-video adapter. If not can display be set to 37,5 hertz then my crt can accept composite video. Thanks.
12. Can I output via Mini DisplayPort to an RCA or S-Video connection?
No. The Mini DIsplayPort connector allows output to Mini DisplayPort, DisplayPort, VGA, DVI, and HDMI connections when using the proper cables and adapters. However, output to RCA, Component, or S-Video connections is not supported.
But see:
https://discussions.apple.com/message/8718087#8718087
https://discussions.apple.com/message/9462900#9462900
Similar Messages
-
Hi, I am new to the Apple IPad and Apple products. When in ITunes I thought that I was previewing an audio book, but apparently I purchased it by mistake as it has ended up on my Visa account. Can anyone advise how I can return it and obtain a refund. Thanks. John B
If you mean you purchased it by mistake... you can try and get a refund...
Contact iTunes Store Customer Service:
Apple - Support - iTunes Store - Contact Us
But it is stated that all Sales are Final... -
Mac Mini: DVI+TOSlink- HDMI Adapter, still fiction?
Hello
I've been studying for a while the best solution for connecting my early 2009 Mac Mini to my LCD TV and Blu-Ray 5.1 System. I didn't took long to figure out the "Mini-DVI->HDMI Adaptor for video" and "Mini-TOS->TOSlink for audio" scenario. The problem is that I'm short on optical inputs. After thinking it through for a while, it dawned upon me that a "DVI+TOSlink->HDMI" adapter would crack this one. This adapter would take the DVI video and the TOSlink audio signals from the Mac Mini and composite them into one single HDMI stream. It seemed far fetched that such an adapter would even exist, but I decided to give it a go.
At first, after some initial research, I only found adapters like the following:
http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ/ref=sr11?ie=UTF8&s=electronics&qid=1258995241&sr=8-1
http://www.amazon.com/Audio-Toslink-HDMI-Converter-Adapter/dp/B002N8PVTM/ref=sr14?ie=UTF8&s=electronics&qid=1258995241&sr=8-4.
Although they do convert the DVI signal to HDMI, the same can't be said in regard to the TOSlink audio signal. The audio part is not encoded into the HDMI stream, getting out through the same optical port it got in.
I was about to let it go when I found this adapter:
http://www.monoprice.com/products/product.asp?cid=101&cp_id=10114&cs_id=1011405&pid=5369&seq=1&format=4#feedback
The are a few customer reviews that specifically state it works flawlessly with the Mac Mini.
The questions are: has anyone tried one of these? Does it really works? It it really possible to composite an HDMI stream from DVI+TOSlink inputs? If so, will it be any quality loss associated to the conversion process?
Thanks in advanceWelcome to the Apple Discussions!
There is not really much converting going on with regard to DVI (D) to HDMI. I use the mini-DVI to DVI (D) adapter that came with my Mac mini and a Belkin cable that is DVI (D) on one end and HDMI on the other. The signals are compatible. But as you say I run a separate audio cable from the mini to my HDTV. That is the real conversion that is taking place in the "black box" devices to which you are linking; adding the audio to the video.
There is another route that skips the video output from the mini altogether, but it is a bit more pricey, USB. I know of two USB to HDMI "black boxes" that give you both audio and video in the HDMI stream.
Atlona USB to HDMI Converter. Model: AT-HDPiX
Grand HD Cinema
Dah•veed -
I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.
Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.
-
I got a Mac mini with a Intel core duo 1.66 GHz
I need a DVI to VGA connector as my monitor uses vga
I'm wondering if I can us a dvi-i connector
24+5 dual link to a vga 15 converterHello, I believe Dual-link is out of the question...
Video Card:
Intel GMA 950
VRAM Type:
Integrated
Details:
Also see: Why are "integrated graphics" in the Mac mini "Core" considered to be inferior?
Standard VRAM:
64 MB
Maximum VRAM:
64 MB
Display Support:
Single Display
Resolution Support:
1920x1200
2nd Display Support:
None
2nd Max. Resolution:
N/A
Details:
Video (Monitor):
1 (DVI-I)
Floppy (Ext.):
None
Details:
Supports a single DVI display (or a single VGA display with the included DVI-to-VGA adapter). Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html -
New Mac Mini / DVI / Apple 17" Studio Display
Greetings all.
I am contemplating purchasing new Mac Mini.
Currently using Mac mini / DVI adapter/ older Apple 17" studio display.
I do not intend monitor change at present.
Question is, which display adapter would allow me to use older DVI adapter/Apple 17" studio display?
Thanks for you time, looking forward to your response.
Regards,
TrevorBFurther exploration, Apple store recommends;
Mini DVI to DVI adapter -
I currently use ibooks on my iphone 4s... I want to be able to send several documents at the same time in one email, I thought there was a way to do this? Can you please help?
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Is there aoss on an airport extreme? I thought there was some way via the Airport Utility?
is there aoss on an airport extreme? I thought there was some way via the Airport Utility.
Nothing called "aoss" is on an AirPort Extreme.
Using the Add Wireless Clients feature under the Base Station menu (top of screen) in AirPort Utility - Manual Setup, there are provisions to add a new wireless client using a PIN or allowing the device to connect on "First Attempt".
Whether this is compatible with "aoss", I cannot say. Please let us know about your findings if you try this. -
I purchased a new imac (4G, OS X 10.6.8) in Feb 2011 and thought my old iPhoto library transferred over. It wasn't. And I can't get iPhoto to open on my old mac. It says, "can't open your current version of iPhoto using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto". I don't think my old mac will support the newer version of iPhoto so I feel like I'm stuck (this is why I got a new mac -- cheaper than upgrading all my software, etc). Help! I really need to get to my old photos, and no, they are not backed up anywhere. Thanks.
You have two options:
Run the Library on a machine that has the same version as the machine that was stolen.
or
Recover the files from this library and start over from scratch.
To recover the files:
Go to your Pictures Folder (or whereever you have the back up) and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Your originals are in the Masters folder.
Note this will only recover your photos as imported from you camera.
Regards
TD -
I am trying to run my macbook (White), I think it is from 2007, to my tv via the VCR RCA inputs. I have successfully run sound through the headphone jack, but I get no video on the TV when I have it hooked up with the Apple mini dvi to RCA adapter. I have tried troubleshooting with the display setting in the mac preferences with no success.
Is this adapter not compatible with older macbooks? Here is the link to the part I am referring to. http://store.apple.com/us/product/M9319G/ANever heard of one failing, but that's with a small sample size. Does your screen resolution change when you plug it in? Does a 2nd monitor show up in the display preference pane?
-
Hi, I'm a new Mac user and I want 10.8.2 but i can't get that unless I have i have 10.8.1 and I cant get that unless I have 10.8. Now I was wondering if anyone could provide me with a link that would allow me to download this version?
Again, that's not a problem - if you purchase Mountain Lion through the App Store, it's been updated to 10.8.2 - and when there are other updates available, you can just download and install them as well.
Just go to the App Store and purchase and install ML. Then run Software Update (Apple menu) to see if there are any updates available for your machine. I keep my System Preferences>Software Update prefs set to check automatically -
Some people would rather check manually. No big deal, just buy it and install it.
Clinton -
PROBLEM finding a mini dvi to rca out for mid 2010 macpro
Why dont you make an Mini DVI to Rca out connector? for the mid 2010 pros and on?
This is a MiniDvi
This is a DVI
And these are RCA plugs -
i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!
Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com
-
i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?
You can do it. This article from Macworld will be helpful to you:
http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
I recommend the "brute-force" method.
Just make sure you have your data backed up properly! -
I'm getting a similar message: First it offers me chance to repair - but if I it repair, it crashes. Then if I select do not repair I get the following warning: There was an error opening the database..." and the only option I get is a "quit" button. Help!
From the path in the error message you posted it appears that the library is not on your internal (root) drive.
What type of disk is the library on and how is it formatted?
The crash log Léonie is referring to is what is printed out when Aperture crashes. You wrote that Aperture crashes in your first post so if the app crashes you must have gotten a crash report.
Message was edited by: Frank Caggiano
Maybe you are looking for
-
Questions on asm disk discover:
Questions on asm disk discover: 1)What is the relationship btween asm_diskstring in the init.ora and DiscoveryString in the GPNP profile.xml? 2) which one finally accounts for the disk discovery process? 3) We know that asmlib disks are self describi
-
How can I get the Airport Express to handle all the PPPoE stuff?
Hi, I'm visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection. We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the
-
Scripting adobe bridge on the mac to setup color settings.
Is there a way to write an applescript to setup the color management settings for adobe bridge? Deploying tiger and cs2 on 200 computers and would love to automate it with a script. The settings do no seem to stick when you setup a default account us
-
Printer wont print from pc but will do from phone
I have gone through the set up process and the printer prints from my phone but not the pc. I have an icon for the printer and it is set as the default printer. ( it will print a test page from the pc but not a document.) When I go through the troub
-
Need to create a formula for this.. If a project completes on A and the date lies between B & C then "display late by 10 days" if a project completes on D and the date lies between E & F then "display late by 20 days" and so on , there are 100's of