I transferred everything from my ssd to an external drive and deleted everything on 'all my files' and Iphoto. Why does it say i have 34.88/ 120.47? Also ordered 128ssd. why out of 120?

I want to clear the unneccessary files in my hd. How do I do that?

Did you empty the trash?
Where  did  my  Disk  Space  go? 
Slimming your hard drive
Seven ways to free up drive space
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace
SpaceControl is a free utility that checks HD space.
Disk Inventory X
WhatSize
SpaceControl

Similar Messages

  • HT5312 Why does it say I have to wait eight hours until I can buy something

    Why does it say I have to wait eight hours before I can buy something???

    Have you typed in the wrong answers to your questions ? That can result in a 8 hour block.
    If you have a rescue email address on your account as described on the page that you posted from then you can use the steps half-way down that page to reset them.
    If don't have one (you won't be able to add one, or change it, until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset : http://support.apple.com/kb/HT5699

  • How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

    How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive

    You can use a program like Carbon Copy Cloner.  It will clone your HD to the external.  The format is the same as your internal drive and you can boot from it using Option key at boot time.
    http://www.bombich.com/
    Regards,
    Captfred

  • Why does it say I have no service when I connect my Ipad to my comupter that has internet thru an air card

    Why does it say I have no service when I connect my Ipad 2 to my comupter with internet thru an aircard. First time user.

    Do you have gfxCardStatus installed?  Is your monitor set to "Integrated" or "Discrete".  You want it set to Discrete to drive the external HDMI display.
    Try resetting the PRAM and SMC
    <About NVRAM and PRAM>
    <Intel-based Macs: Resetting the System Management Controller (SMC)>
    Are you sure you have a good miniDisplayPort to HDMI cable?
    Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
    Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

  • Why does itunes say i have the latest version 4.2.1 (8c148) for my 3rd gen iPod touch when it should be iOS 5?

    why does itunes say i have the latest version 4.2.1 (8c148) for my 3rd gen iPod touch when it should be iOS 5?

    Be sure it is really a 3rd gen. Some people with 2nd gens were told they were 3rd gens.  Identifying iPod models or Look up specs by Serial Number. If it is a 2nd gen, then you can't upgrade.
    IF IT REALLY IS A THIRD GEN iPod Touch, then you first need to upgrade to iTunes 10.5 in order to download iOS 5 because older versions of iTunes don't support and can't sync with iOS 5.

  • Why does iTunes say I have two different total numbers of movies?

    On the sidebar, it lists 371 Movies. When I'm in Movies with everything listed, the number at the bottom next to total number of hours is 372 Movies. 372 Movies is the correct number of movies. I have all of those movies also loaded into iTunes on my laptop running 10.7. These are all movies which are hosted locally on a hard drive; none of them are iCloud downloads or matches. So why does it think I have 1 less movie on the side bar? Is there a way to find out if one particular film hasn't loaded properly or can't be read for some reason? Thanks

    The sidebar lists # of unplayed (not completed) items.
    They should have a blue dot (not played) or half blue dot (started but not completed) next to the name.

  • Why does it say i have extra characters in this function?

    why does it say extra characters?
    1087: Syntax error: extra characters found after end of program.
    Symbol 12.addEventListener(MouseEvent.onRelease,exit);
    function exit(evt:MouseEvent):void {
        -root.nav_mc.gotoAndPlay(2);  
         -root.page1_mc.gotoAndPlay(30); 

    http://www.megaupload.com/?d=HYR51BPM
    that is the link to upload my website so far... i am following the tutorial from this site:
    http://www.flashvideotutorials.info/paidarea.html
    im on the adding pages 2 part, but he is using as 2 and im using as 3
    i cant figure out how to get the pages to work right.... please help me out
    thanks
    Kyle

  • Transferring data from pc to mac using external drive usb

    is there anything "special" you need to do to transfer data from Win 7 to MacBook Air using a USB 3.0 external drive?

    No.
    (118476)

  • Why does Settings say I have 1.7GB of messages, when the. Messages app is clear of all conversations?

    Very frustrating! I have restored, restarted, everything!

    Since CS6 is the current release, upgrading to CS5 is a near impossibility, and EVERYONE will need to upgrade in lockstep or you'll be worse off than you are now with users of your newer version creating files that cannot be opened by users of CS4 (and your CS4 packages won't automatically install the fonts in the documents in the later versions without manually changing the names of the packaged fonts folders).
    As far as font formats, if you are going to collaborate cross-platform, the font of choice is OpenType, which is 100% cross-platform compatible, and second choice is Windows TrueType which also can be installed on Mac OS X (so, essentially, also cross-platform). Last choice would be to use Windows Type1 which can be installed in the private InDesign Fonts folder in the Mac applications folder and will work in ID, but nowhere else. Any of these would allow everyone to use the same fonts, presuming you all purchase the same versions. Purchasing Windows versions and Mac versions of the same font usually works, but there may be little surprises, and you probbly don't want that.

  • Why does iCloud say I have no storage?

    iCloud says I have no storage

    It says that my next backup size is 7.3 GB, but I have no idea why, because the only thing selected is the Find iPhone app, which takes up 0.2 KB...How do I get rid of whatever it THINKS it's backing up?

  • Having a prob importing a large file from a sony DR 60 external drive via log a transfer in FCP this is the first time this has happened have the sony plug. HDisc compatibility is sorted as the first 2 short clips are imported. Any advice will be welcome

    problem importing a large file from a Sony DR60 external drive to FCP. Never had a problem before first two shot clips are captured in log and transfer but the larger 2 hour clip only downloads the first few seconds. Any advice?

    I can think of 2 things to check.
    1. The Scratch disc has plenty of space.
    2. System Settings>Scratch Disc does not have a restriction in the Limit Capture/Export File Size Segment To:
    Al

  • Why does it say I have more photos on my iPhone than I really do?

    When I back up my phone I apparently have over 1800 photos and over 4GB being used in photos. However, my photo app has only 180 picture in the album and photo stream combined. How do I find and delete the extra 1700 photos?

    I managed to get rid of the phantom usage. Restoring iPhone and resetting the phone settings/data do not work for me.
    I had to move the Date on my phone earlier by 1,2,3 months and found the phantom photos in the Recently Deleted Folder. Next, I deleted the photos manually from the Recently Deleted Folder and the usage got freed up from my iPhone.
    Hope this works for you

  • Why does Indesign say I have missing fonts even though they are in my packaged document?

    I use CS4 on my pc at work, and always package my files, as I have always done on my mac at home, to keep the links and fonts together so that when I send someone a folder, all of the fonts and images work.  For some reason, the packaged graphic designs (created on a mac) that are being sent to us from our graphic designer, all of my fonts are lost - even after having purchased the main one that we use - Gotham - to prevent this from happening.  This also occurs with any designs that I package and send out to others in our office.  I always have to relink the Gotham fonts, and I cannot retrieve the formatting for the fonts that we don't have, even though they are packaged. 
    We are considering purchasing a mac for me to use in the office, but I'd like to make sure that it is not user error before we proceed.
    Any ideas would be wonderful.  I never had this problem with my mac at home with packaging, and it has me confused and frustrated at work.
    Thanks!

    Since CS6 is the current release, upgrading to CS5 is a near impossibility, and EVERYONE will need to upgrade in lockstep or you'll be worse off than you are now with users of your newer version creating files that cannot be opened by users of CS4 (and your CS4 packages won't automatically install the fonts in the documents in the later versions without manually changing the names of the packaged fonts folders).
    As far as font formats, if you are going to collaborate cross-platform, the font of choice is OpenType, which is 100% cross-platform compatible, and second choice is Windows TrueType which also can be installed on Mac OS X (so, essentially, also cross-platform). Last choice would be to use Windows Type1 which can be installed in the private InDesign Fonts folder in the Mac applications folder and will work in ID, but nowhere else. Any of these would allow everyone to use the same fonts, presuming you all purchase the same versions. Purchasing Windows versions and Mac versions of the same font usually works, but there may be little surprises, and you probbly don't want that.

  • Why does itunes say i have over 700 photos on my phone but i really only have about 200?

    I have a 4S running 8.1.1  and on itunes when i connect my phone it says i have 700+ pictures when in reality by camera roll has less than 200. I am connected to ICloud but I turned off all settings in the "Photos" section of the Icloud settings. I did sync all my photos that are on my phone on to IPhoto on my computer. Does ITunes count the pictures on IPhoto on my computer and my Camera roll to make over 700+ photos? That is the best guess i have and i think is unlikely. Help!

    Try looking at the previous posts on the right side of this page under the heading "More Like This" with your same problem.

  • Why does it say I have an invalid email when I try to set up sync?

    I have an ipod touch. I downloaded the firefox home app onto the device.
    I then tried to sync my home computer.
    When I try to set up a firefox home account I go to "tools", enter "set up a sync " and then enter "create a new account". A window comes up that "email address". As soon as I start to enter my email an "x" shows up followed by "this is an invalid email". What's up?

    Just keep typing until you have entered the entire email address.

Maybe you are looking for

  • Cluster Installation - SQL 2005 / 2003 - Creating cluster group

    Hi All, I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS  Installation. let me summarize the activities done so far Environment Details Physical Disk : G: (Physical Disk - SA

  • How "windows-ish" is an iMac's USB port?

    Hi there, Mac-cognoscenti -- I'm interested in getting a GPS. My son-in-law showed me a pretty powerful-appearing one by Garmin. But when I asked him how you go about updating its sw or map info, he said they only support PCs (yeccch) as the platform

  • Need report output to be display in 'XML' format.

    Hi ALL, I have a requirement to generate a report in different format like 'PDF','EXCEL' AND 'XML' in my OAF page. for 'PDF' i am able to generate report after selecting the output fromat from my choicebox through below code : DocumentHelper.exportDo

  • Accepting traditional %= ... % dynamic attribute values in tags

    I am using Tomcat 5.5 (Servlet 2.4). This JSP code works: <% String strFoo = "index.jsp"; %> <jsp:include page="<%= strFoo %>"/> ... but this code that uses a custom tag I wrote doesn't work: <% String strFoo = "index.jsp"; %> <myutil:check url="<%=

  • How to transfer the Inventory to the Asset

    dear experts, Scenario: Organization is purchased one  Asset. It is posted in inventory. Later on it finds that is required to post in asset. Now it required to transfer that inventory(ASSET)  to Asset? What is the movement type? How to solve this pr