Need report output to be display in 'XML' format.

Hi ALL,
I have a requirement to generate a report in different format like 'PDF','EXCEL' AND 'XML' in my OAF page. for 'PDF' i am able to generate report after selecting the output fromat from my choicebox through below code :
DocumentHelper.exportDocument(pageContext, reportOutput, "CustomerQuote","PDF");
for 'XML' and 'EXCEL' i am not able to generate through documentHelper method please suggest me how can i process.
Regards
Deb

balaji,
Using web.show_doc u can only display the reports. If you want it to be stored in the server, you can use run_report_object.
Rajesh Alex

Similar Messages

  • Need report output same as its show in the previewer in the (.txt and .xls) format

    I need an output file(in text and excel format) generated from the report builder exactly in same format as it shows in the Report previewer.
    it should include all the labels as well as the data.
    Thanx in advance
    Reply ASAP
    From
    Dharmendra

    Hi Dharam
    You can create text file output as seen on Live Previewer by generating to Text (File->Generate to File->Text). Ensure that you run Builder with the following command line parameter:
    MODE=CHARACTER
    If the Builder mode is not character (BITMAP), it will generate PostScript file if you do a File->Generate to File->Text.
    You can create Excel format output from Reports with Delimited output (File->Generate to File->Delimited). In the ensuing dialog box, choose comma (,) as the delimiter to obtain a CSV file. Export this file in Excel.
    Regards
    The Oracle Reports Team

  • Report output in the form of XML

    Hi All,
    May i have any inputs pls.
    Requirement---
    A report when ran should give the output in the XML format.
    Thanks.

    hi,
    try this FM...
    DMC_CONVERT_TABLE_TO_XML
    Regards,
    Shankar.

  • Sending report output via E-mail (excel pivoted format)

    Hi all,
    i have a written a report where i need to send the report output to somebody via
    E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
    i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
    now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field  length should be adjusted as per the output field length.
    i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
    any idea will be highly appreaciated.
    Regards
    if not p_email1 is initial.
         perform fill_report_csv.
         perform f_send_internet_mail.
      endif.
    FORM fill_report_csv.
       data :   l_text(232) type c,
               v_matnr1(21) type c,
               v_matnr(21) type c,
               v_matkl(14) type c,
               v_maktx(45) type c,
               v_ttlstk(14) type c,
               v_verpr(14) type c,
               v_werks(14) type c,
               v_lgort(14) type c,
               v_char(10) type c,
               v_stks type p ,
               v_po(40) type c,
               v_qty(13) type c,
                v_qty1 type sy-datum,
               v_date(15) type c,
               v_date1(15) TYPE C,
               v_name(35) type c,
               v_eknam(18) type c,
               v_lifnr(15) type c,
            l_po(40) type c,
            v_matnr(20) type c,
             l_rate(11) type  p decimals 5,
             l_flag type c.
      concatenate c_equal c_colon 'PO no.' c_colon
                    into v_po.
      concatenate c_equal c_colon 'Material no.' c_colon
                    into v_matnr.
      concatenate c_equal c_colon 'Description.' c_colon
                    into v_maktx.
      concatenate c_equal c_colon 'Due Qty.' c_colon
                    into v_qty.
      concatenate c_equal c_colon 'Del Date.' c_colon
                    into v_date.
      concatenate c_equal c_colon 'Vendor.' c_colon
                    into v_name.
      concatenate c_equal c_colon 'Buyer.' c_colon
                    into v_eknam.
      concatenate c_equal c_colon 'Vendor Code.' c_colon
                    into v_lifnr.
    concatenate
             v_po v_matnr v_maktx v_qty
             v_date v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
      append i_download .
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    clear wa_output.
    loop at i_output into wa_output.
       on change of wa_output-ebeln.
         clear v_lines.
         loop at i_eket into wa_eket
                 where ebeln = wa_output-ebeln.
           v_lines = v_lines + 1.
           clear wa_eket.
         endloop.
    **-- Checking of page break
         v_lines = sy-linno + v_lines .
         if 55 < v_lines  .
           write:/0(161) sy-uline.
           new-page.
         endif.
      clear v_lines.
          loop at i_eket into wa_eket
                  where ebeln = wa_output-ebeln.
            v_lines = v_lines + 1.
            clear wa_eket.
          endloop.
    *-- Calculating the due qty.
        wa_output-dumng = wa_output-menge - wa_output-wemng.
    *-- Writing the Line items of the PO.
        read table i_ekpo into wa_ekpo
              with key ebeln = wa_output-ebeln
                       ebelp = wa_output-ebelp.
         l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
    *-- Writing of PO detail
         if wa_output-dumng gt 0 .
         v_qty = wa_output-dumng.
        v_date1 = wa_output-eindt.
        v_maktx = wa_output-maktx.
         if wa_output-maktx+0(1) = '"' .
                concatenate  c_equal wa_output-maktx
                   into v_maktx  .
             else .
                concatenate  c_equal c_colon wa_output-maktx c_colon
                   into v_maktx  .
             endif .
       if wa_output-name1+0(1) = '"' .
                concatenate  c_equal wa_output-name1
                   into v_name  .
             else .
                concatenate  c_equal c_colon wa_output-name1 c_colon
                   into v_name  .
             endif .
        v_name = wa_output-name1.
        v_lifnr = wa_output-lifnr.
         write wa_output-eindt to v_date1 DD/MM/YYYY.
         concatenate '="' wa_output-ebeln '/'
                wa_output-ebelp '"' into v_po .
         concatenate '="' wa_output-matnr '"' into v_matnr .
             concatenate  c_equal c_colon wa_output-maktx c_colon
               into v_maktx  .
              concatenate  c_equal c_colon wa_output-dumng c_colon
               into v_qty1  .
               concatenate  c_equal c_colon wa_output-eindt c_colon
               into v_date1  .
              concatenate  c_equal c_colon wa_output-name1 c_colon
               into v_name  .
                concatenate  c_equal c_colon wa_output-eknam c_colon
                into v_eknam  .
              concatenate  c_equal c_colon wa_output-lifnr c_colon
               into v_lifnr  .
              concatenate  c_equal c_colon wa_mard-werks '/'
               wa_mard-lgort c_colon
               into v_lgort .
                 concatenate '="' wa_output-lifnr '"' into v_lifnr .
    condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
         concatenate
             v_po v_matnr v_maktx v_qty
             v_date1 v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
        concatenate con_cret i_download INTO i_download .
        append i_download .
      endif.
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    endloop.
    ENDFORM.                    " fill_report_csv
    *&      Form  f_send_internet_mail
          text
    -->  p1        text
    <--  p2        text
    FORM f_send_internet_mail.
    Variables
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    data : found_receiver type c,
           v_title(80) type c,
           l_text(180) type c.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Adds text to email text table
      append 'Pls see attached open purchase order report.' to it_message.
      append '' to it_message.
      concatenate 'Note: This is system generated report'
                  ', figures may subject to actual physical count.'
                  into l_text separated by space.
      append l_text to it_message.
    Populate the subject/generic message attributes
      CLEAR gd_doc_data.
      READ TABLE i_download INDEX w_cnt.
      gd_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( i_download ).
      gd_doc_data-obj_langu  = sy-langu.
      gd_doc_data-obj_name   = 'SAPRPT'.
    if p_asdate is initial .
         concatenate p_title ' '
                  sy-datum sy-uzeit into v_title separated by space.
    else .
        concatenate p_title ' '
                 p_bldat p_cputm into v_title separated by space.
    endif .
      gd_doc_data-obj_descr  = v_title .
      gd_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = i_download[].
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Create attachment notification
      it_packing_list-transf_bin = 'X'.
      it_packing_list-head_start = 1.
      it_packing_list-head_num   = 1.
      it_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
      it_packing_list-doc_type   =  'XLS'.
      it_packing_list-obj_descr  =  'OPEN PURCHASE ORDER' .
      it_packing_list-obj_name   =  'PO.XLS' .
      it_packing_list-doc_size   =  it_packing_list-body_num * 255.
      APPEND it_packing_list.
    assign SAP user smtp address from successful retrieval.
      loop at p_email.
    Add the recipients email address
         found_receiver = 'X' .
         it_receivers-receiver = p_email-low.
         it_receivers-rec_type = 'U'.
         it_receivers-com_type = 'INT'.
         it_receivers-notif_del = ''.
         it_receivers-notif_ndel = 'X'.
         append it_receivers .
      endloop .
    Add default recipient email when unable to locate purc group email
       if found_receiver is initial .
           it_receivers-receiver = p_email.
           it_receivers-rec_type = 'U'.
           it_receivers-com_type = 'INT'.
           it_receivers-notif_del = ''.
           it_receivers-notif_ndel = 'X'.
          append it_receivers.
       endif .
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    Instructs mail send program for SAPCONNECT to send email.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = ' '
                        and return.
      endif.
    ENDFORM.                    " f_send_internet_mail

    Hi,
    go through this link,
    http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
    you have some sample programs.
    Regards,
    Raghavendra

  • Can we generate the output of SQL Query in XML format ..

    Hi Team,
    Can we generate an XML doc for an SQL Query.
    I've seen in SQL Server 2000.It is generating the output of an SQL Query in xml format.
    select * from emp for xml auto
    The output looks like
    <emp EMPNO="7369" ENAME="SMITH" JOB="CLERK" MGR="7902" HIREDATE="1980-12-17T00:00:00" SAL="2800" DEPTNO="20"/><emp EMPNO="7370" ENAME="SMITH" JOB="CLERK" MGR="7902" HIREDATE="1980-12-17T00:00:00" SAL="2800" DEPTNO="10"/>

    Just a little bit of short hand.
    Get the XML out of your database, via HTTP
    Of course the easiest method is just to return an XMLType from a stored procedure and let the calling routine figure out what to do with it. Instead
    of that way though, I'll show you how to do it via HTTP. It's all completely built into 10g and is super easy to use.
    CREATE OR REPLACE VIEW emps_and_depts AS
    SELECT e.employee_id AS "EmployeeId",
    e.last_name AS "Name",
    e.job_id AS "Job",
    e.manager_id AS "Manager",
    e.hire_date AS "HireDate",
    e.salary AS "Salary",
    e.commission_pct AS "Commission",
    XMLFOREST (
    d.department_id AS "DeptNo",
    d.department_name AS "DeptName",
    d.location_id AS "Location"
    ) AS "Dept"
    FROM employees e, departments d
    WHERE e.department_id = d.department_id
    Some people hear web and immediately start salivating about security issues. Let me address that quickly. Just because you have the HTTP and/or
    FTP servers running in the database, that does not mean you have a security problem. For one, I would hope your databases are behind a firewall.
    Second, with the correct architecture (DMZ, app servers, etc) you can make this data available outside the firewall fairly transparently and third,
    just because it's on the web does not mean the data MUST be available on the internet. This is a good way to make your data available on your
    intranet. If you are worried about people INSIDE your firewall, that still doesn't preclude web based access. Follow Oracle security guidelines.
    Before I show you how to get to your data, let's talk about URLs and URIs. A URL is a Uniform Resource Locater and URI is a Uniform Resource
    Identifier. A URL is the way you would identify a document on the net, i.e. http://www.oracle.com is a URL. A URI is a more generic form of a URL.
    Oracle supports three types of URI: HTTPURIType - basically a URL (which would be like the URL above), XDURIType - a pointer to an XDB resource
    (usually an XML document but can be other objects), and DBURIType - a pointer to database objects.
    It's the DBURIType that we're going to concentrate on here. The DBURIType let's us reference database objects using a file/folder paradigm. The
    format for a DBURI is /oradb/<schema>/<table>. Oradb is shorthand for the database; it is not the database name or SID. My database is named XE
    but I still use oradb in the DBURI. For example, the view we created above is in my XE database, is owned by HR (at least in my case) and is called
    EMPS_AND_DEPTS. This can be referenced as /oradb/HR/EMPS_AND_DEPTS.
    If the view had many rows and you wanted only one of them, you can restrict it by including a predicate. The documentation for XDB has a great
    write up on Using DBURIs.In our case, we are going to write out the entire document. Now that you understand that the DBURI is a pointer to
    objects in our instance, we can use that to access the data as a URL.
    The format for the URL call is http://<machinename>:<port>/<DBURI>
    In my case, my XE database is running on a machine called mach1 and is listening on port 8080. So to see the view we created above, I open my
    browser and navigate to: http//mach1:8080/oradb/HR/EMPS_AND_DEPTS
    The created URL will be as http//mach1:8080/oradb/PUBLIC/EMPS_AND_DEPTS
    If your database is set up correctly and listening on port 8080 (the default), your browser should ask you to login. Login as the user who created the
    view (in my case HR). You should now get an XML document displayed in your browser.
    And that's it. It doesn't get much simpler than that. If you get rid of the descriptive text above, it basically comes down to:
    Create a table or view
    Open your web browser
    Enter a URL
    Enter a user ID and password
    View your XML
    If you notice, Oracle formatted the data as XML for us. Our view returns scalar columns and an XML fragment called Dept. Oracle formatted the
    return results into an XML format.
    And as a side note, if you look closely, you'll see that my URL has PUBLIC where I said to put HR. PUBLIC is a synonym for all objects that your
    logged in user can see. That way, if your user has been granted select access on many schemas, you can use PUBLIC and see any of them.

  • Report output as an attachment in.XLS format via email.

    Hi all,
    When i run my report in back ground, my alv report output is to be sent as an email attachment in excel (.XLS) format. The issue i am facing is that i have around 40 fields in the output and i need to create a Header line with the Field Description in the Excel file. I am using the FM 'SO_DOCUMENT_SEND_API1', and passing the  report output in to the table CONTENTS_BIN     LIKE     SOLISTI1 which is of Char 255. but my report output header is exceeding that length.
    Kindly suggest me on how to acheive this.
    Regards,
    Jose

    Hi Jose,
    As for your first question you may place cl_abap_char_utilities=>horizontal_tab between contetaned fields' values. It will place then a tab mark between each two fields, which will be considered by excel as new column.
    Using cl_abap_char_utilities=>newline is also correct. I will probably only result in one extra line at the end as after you append your last line to BIN table, also newline will be placed. cl_abap_char_utilities=>lf on the other hand should be placed in front of each line as this denotes Carriage Return so it simply means: "place the cursor at the beginning of each line just before writing this line".
    Regards
    Marcin

  • Report is not displayed in xml format.

    Hi,
    We have a test station based in teststand 4.1 and labview 8.6 code modules.
    From one day to another, the xml report is blank, no character is displayed. That in Operator interface or sequence file execution in teststand editor.If the report format is changed to ASCII or HTML, then runs OK.
    The first step taken was to reload the directories "Cfg\*.ini" and "teststandmodels\Stylesheets\*.xls" from another test station that runs ok. Not solved.
    The second option was to uninstall and reinstall teststand. Also not solved the problem. Then I suposse that this problem is caused for a file or parameter that is not dependent of Teststand, but I don't really know.
    Any suggestions would be appreciated.
    Regards,
    Bergidum.

    Thanks for your help Sendia,
    Yes, I have already tried Computer mother test and all type of reporting options. Only ASCII and and HTML report formats generate visible results.
    Also on-the-fly-reporting is my option by default.
    Before format and reinstall the operating system (windows XP) and reinstall the NI package, I would like to know the origin of the malfunction because there are other five test stations working properly, but if the same problem appears in a new station, then to know the solution.
    Thanks for your attention,
    Bierzo.

  • Output from Concurrent program in XML format for bytes greater than 32K

    Hi,
    I created a custom concurrent program where i send the generated XML data as an output to the program.
    I have an XML template attached to the program, so the template picks up the xml output and converts it to a PDF.
    so ultimately when i run the concurrent program, the output is a PDF file. This way it is easy for the user to just run a program and get a PDF file.
    Now the generated XML data is from an oracle seeded program and it is a BLOB.
    I am converting it to a CLOB so that i can write it to the output. if the CLOB doesnt exceed 32K bytes, i have no issues writing it to the output.
    But since we cannot write more than 32K bytes, i an using a substr to write chunks of the CLOB for every 30,000 bytes.
    since it is chunking at every 30,000 bytes the next 30,000 bytes are coming in the next line and XML publisher is throwing an error with invalid character.
    Any idea how i can overcome this?
    Either i write the whole 33000+ bytes in one line to the fnd output or try to remove the line breaks from the xml data.
    Thanks in advance for anyone reading this!

    >
    > since it is chunking at every 30,000 bytes the next 30,000 bytes are coming in the next line and XML publisher is throwing an error with invalid character.
    Any idea how i can overcome this?So I suppose you're using FND_FILE.PUT_LINE ?
    Why not use FND_FILE.PUT instead, so that no new line is generated after each chunk ?
    http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458258.htm#I_fndfile

  • Report is executing in background and need data(output) in excel format

    Report is executing in background and need data(output) to get downloaded in excel format in my PC from an internal table;;in any drive i.e. C: or D: .When executing in backround it prompt to user with which location excel file to be saved and the name of file.How to download in background in excel format?
    Edited by: PRASHANT BHATNAGAR on Aug 26, 2008 6:24 AM

    Hi
    Download a report to excel with format (border, color cell, etc)
    Try this program...it may help you to change the font ..etc.
    Code:
    REPORT ZSIRI NO STANDARD PAGE HEADING.
    this report demonstrates how to send some ABAP data to an
    EXCEL sheet using OLE automation.
    INCLUDE OLE2INCL.
    handles for OLE objects
    DATA: H_EXCEL TYPE OLE2_OBJECT,        " Excel object
          H_MAPL TYPE OLE2_OBJECT,         " list of workbooks
          H_MAP TYPE OLE2_OBJECT,          " workbook
          H_ZL TYPE OLE2_OBJECT,           " cell
          H_F TYPE OLE2_OBJECT.            " font
    TABLES: SPFLI.
    DATA  H TYPE I.
    table of flights
    DATA: IT_SPFLI LIKE SPFLI OCCURS 10 WITH HEADER LINE.
    *&   Event START-OF-SELECTION
    START-OF-SELECTION.
    read flights
      SELECT * FROM SPFLI INTO TABLE IT_SPFLI UP TO 10 ROWS.
    display header
      ULINE (61).
      WRITE: /     SY-VLINE NO-GAP,
              (3)  'Flg'(001) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (4)  'Nr'(002) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (20) 'Von'(003) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP,
              (8)  'Zeit'(005) COLOR COL_HEADING NO-GAP, SY-VLINE NO-GAP.
      ULINE /(61).
    display flights
      LOOP AT IT_SPFLI.
      WRITE: / SY-VLINE NO-GAP,
               IT_SPFLI-CARRID COLOR COL_KEY NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CONNID COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CITYFROM COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-CITYTO COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP,
               IT_SPFLI-DEPTIME COLOR COL_NORMAL NO-GAP, SY-VLINE NO-GAP.
      ENDLOOP.
      ULINE /(61).
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-007
           EXCEPTIONS
                OTHERS     = 1.
    start Excel
      CREATE OBJECT H_EXCEL 'EXCEL.APPLICATION'.
    PERFORM ERR_HDL.
      SET PROPERTY OF H_EXCEL  'Visible' = 1.
    CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING #1 = 'c:\kis_excel.xls'
    PERFORM ERR_HDL.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-008
           EXCEPTIONS
                OTHERS     = 1.
    get list of workbooks, initially empty
      CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
      PERFORM ERR_HDL.
    add a new workbook
      CALL METHOD OF H_MAPL 'Add' = H_MAP.
      PERFORM ERR_HDL.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-009
           EXCEPTIONS
                OTHERS     = 1.
    output column headings to active Excel sheet
      PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
      PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
      PERFORM FILL_CELL USING 1 3 1 'Von'(003).
      PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
      PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
      LOOP AT IT_SPFLI.
    copy flights to active EXCEL sheet
        H = SY-TABIX + 1.
        PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
        PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
        PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
        PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
        PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
      ENDLOOP.
    changes by Kishore  - start
    CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
      CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
      PERFORM ERR_HDL.
    add a new workbook
      CALL METHOD OF H_MAPL 'Add' = H_MAP  EXPORTING #1 = 2.
      PERFORM ERR_HDL.
    tell user what is going on
      SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               TEXT       = TEXT-009
           EXCEPTIONS
                OTHERS     = 1.
    output column headings to active Excel sheet
      PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
      PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
      PERFORM FILL_CELL USING 1 3 1 'Von'(003).
      PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
      PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
      LOOP AT IT_SPFLI.
    copy flights to active EXCEL sheet
        H = SY-TABIX + 1.
        PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
        PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
        PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
        PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
        PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
      ENDLOOP.
    changes by Kishore  - end
    disconnect from Excel
         CALL METHOD OF H_EXCEL 'FILESAVEAS' EXPORTING  #1 = 'C:\SKV.XLS'.
      FREE OBJECT H_EXCEL.
      PERFORM ERR_HDL.
          FORM FILL_CELL                                                *
          sets cell at coordinates i,j to value val boldtype bold       *
    FORM FILL_CELL USING I J BOLD VAL.
      CALL METHOD OF H_EXCEL 'Cells' = H_ZL EXPORTING #1 = I #2 = J.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_ZL 'Value' = VAL .
      PERFORM ERR_HDL.
      GET PROPERTY OF H_ZL 'Font' = H_F.
      PERFORM ERR_HDL.
      SET PROPERTY OF H_F 'Bold' = BOLD .
      PERFORM ERR_HDL.
    ENDFORM.
    *&      Form  ERR_HDL
          outputs OLE error if any                                       *
    -->  p1        text
    <--  p2        text
    FORM ERR_HDL.
    IF SY-SUBRC <> 0.
      WRITE: / 'Fehler bei OLE-Automation:'(010), SY-SUBRC.
      STOP.
    ENDIF.
    ENDFORM.                    " ERR_HDL
    Regards
    Murali Papana

  • RDF Report Output Got Displayed in Special Chars

    Team,
    RDF report output is getting displayed in special chars.
    when i query the data from SQL Developer, the data is displayed fine.
    But when the data is displayed in the report the characters(single quotes, double quotes) are not displayed properly, they are displayed in a special char.
    why it is happening so . Is it related any font missing ? Plz do let me know.
    thanks
    sridhar

    (single quotes, double quotes) These are probably not really single and double quotes. Check the ASCII value.
    drop table ttest;
    create table ttest (col1 varchar2(10));
    insert into ttest values ('''Quote''');
    insert into ttest values ('"Quote"');
    select * from ttest;
    select dump(col1) from ttest;
    Table dropped.
    Table created.
    1 row created.
    1 row created.
    COL1     
    'Quote'  
    "Quote"  
    2 rows selected.
    DUMP(COL1)                                                                     
    Typ=1 Len=7: 39,81,117,111,116,101,39                                          
    Typ=1 Len=7: 34,81,117,111,116,101,34                                          
    2 rows selected.

  • Displaying pages in classical report output

    Hi all,
    I am developing a report. In the report output I am displaying 4 lines. When I click on 1st line then list will display but on the second page after the intial output page and when I click on 2nd line then list will display on the third page after the second page.
    My requirement is when I click on each line it will display the related page.
    I can get the page and page line  by the syntax:
    read line 1 of page sy-index.
    But how to display this one.
    Suggest.
    Thanks
    Sanket sethi

    hiii
    for selecting lines like you gave in example..you can use
    AT LINE-SELECTION.
      CASE sy-lilli.
          WHEN '5'.
                 logic for display page 2nd.
        WHEN '6'.
                 logic for display page 3rd.
        WHEN '7'.
                 logic for display page 4th.  
    WHEN '8'.
                 logic for display page 5th.
      ENDCASE.
    regards
    twinkal

  • RXi report output to xml output conversion

    Hi All,
    We are working on RXi reports in Standard Applied Receipt Register report in the AR module.
    We have a requirement to generate report output for the same in XML publisher; can we generate xml output files from the RXi reports to be feeded to rtf templates.
    If not how to go about the given requirement?
    Any pointers for the same will be highly helpful. Thanks in advance.

    Hi,
    Is it normal RDF if yes, then first step you change the output type to XML after that run the report and check the view out, if it showing as XML if yes. Install XML publisher and after that open word and under one menu you will see the data under this loading option and load this file and after that you can create te XML rtf too.
    Thanks
    Shishu Paul

  • Changing the seeded rdf report output from text to PDF

    Hi All,
    I am trying to change the seeded report "Print Requisition Report" output from text to PDF. I changed the output format in the concurrent program definition from text to pdf. The report is now getting displayed in pdf format, but the alignment of the fields are changed. The output is not printing as it was printing while in the text output format. The output looks very sloppy, with uneven fonts and too much of text wrapping.
    I tried some formatting and fields are somehow getting displayed but doesnt look in proper format. I am not able to change the font style in the report builder 6i, even if i change it is printing in the same font style with uneven font size. I think reducing the font size might help, but i am unable to change.We are on 11.5.10.2. Please provide your valuable suggestions on how to go about.
    Thanks
    Sarvesh

    Hi Hussein,
    Thanks for the information. After the adjustments in the layout and the font change the report is now getting displayed without any clipping when clicked on view output. But when the same report is printed some characters on the left and and right side is getting clipped. Please help on how to solve this issue.
    Thanks,
    Sarvesh

  • Date range in report output

    Hi Abaper,
    I have a requirment to display range of date in report output . I have fixed output to 7 days.
    when ever i input date range 7 days its display fine but when i input 3 days the report output date is display upto 3 is fine but in 5th to 7th column date should not display correct format.
    below is my code.
    date = p_date-low.
    wa_date-dat = date.
    APPEND wa_date TO it_date.
    CLEAR  wa_date.
    IF date LT p_date-high.
      date1 = p_date-low + 1.
      wa_date-dat = date1.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    IF date1 LT p_date-high.
      date2 = date1 + 1.
      wa_date-dat = date2.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    IF date2 LT p_date-high.
      date3 = date2 + 1.
      wa_date-dat = date3.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    IF date3 LT p_date-high.
      date4 = date3 + 1.
      wa_date-dat = date4.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    IF date4 LT p_date-high.
      date5 = date4 + 1.
      wa_date-dat = date5.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    IF date5 LT p_date-high.
      date6 = date5 + 1.
      wa_date-dat = date6.
      APPEND wa_date TO it_date.
      CLEAR  wa_date.
    ENDIF.
    Can any one help me on this issue.
    Thanks in Advance.
    Thanks & Regards,
    Amit

    Hi Amit,
    pls see the code below:
    date = p_date-low.
    wa_date-dat = date.
    APPEND wa_date TO it_date.
    CLEAR wa_date.
    IF date LT p_date-high AND date is not initial.
    date1 = p_date-low + 1.
    wa_date-dat = date1.
    APPEND wa_date TO it_date.
    CLEAR wa_date.
    ENDIF.
    IF date1 LT p_date-high AND date1 is not initial.
    date2 = date1 + 1.
    wa_date-dat = date2.
    APPEND wa_date TO it_date.
    CLEAR wa_date.
    ENDIF.
    IF date2 LT p_date-high AND date2 is not initial.
    date3 = date2 + 1.
    wa_date-dat = date3.
    APPEND wa_date TO it_date.
    CLEAR wa_date.
    ENDIF.
    IF date3 LT p_date-high.
    date4 = date3 + 1.
    wa_date-dat = date4.
    APPEND wa_date TO it_date.
    CLEAR wa_date.
    ENDIF.
    Pls add the condition also in ur check for all the IF conditions..and just see if it works...
    Keerthi

  • Concurrent Request Output show in XML format

    Hi 2 all
    I have developed XML report and also registered with predefine procedure but when i run respective concurrent request it display in XML format instead of PDF/RTF.
    Following procedure follow for XML report registration.
    http://youritbox.wordpress.com/2011/08/22/create-xml-publisher-report-using-oracle-reports-rdf/#respond
    Regards ,
    Zulqarnain

    did you have a template?
    plz post short name of concurrent + application and short name of xml template and definotion+application

Maybe you are looking for