I-Trigue 3200 vs 3220

I'd like to buy one of these speaker sets for my office PC. Which of them is better in terms of sound quality? I noticed that the older 3200 has higher RMS power but that doesn't mean it sounds better so I would like to hear your experiences and help me decide.

Creative don't have service if your product is out of warrantee. Mo matter if you want to repair it.
Buy another one and wait two more years, or go to another mark.

Similar Messages

  • Dimensions of the I-Trigue 3200 subwoofer unit?

    Please can someone tell me the dimensions of the I-Trigue 3200 subwoofer unit.

    Big_Nige,
    The dimension for the subwoofer is about (L)22.3cm, (W)23.2cm and (H)22.cm.
    Jason

  • I-Trigue 3200 Cutting Out

    Hello all-
    I bought a pair of I-trigue 3200 speakers over Christmas break, and have generally been impressed- I really like the sound and design.
    However, they have in recent times started to cut out. Most frequently, it's just the sub that cuts out, but also they all die from time to time. When the bass goes out, the blue light on the volume control on the remote dims; when they all go out, it turns off. Smacking the remote fixes this and they all kick back on, but I'd prefer some advice because this is annoying.

    I have the same problem. Except today, when I turned on my computer, I couldn't listen to anything. Any trace of installation of this speaker system was completely gone. When I go to Start > Accessories > Entertainment > Volume Control, it says there is no speakers installed. When I go to detect new hardware, nothing. When I do Windows Media Player, every song of all my many songs comes up with an error. With Winamp, it says something along the lines of "Bad Driver". I go to get drivers, and there is none. I restarted, unplugged, started, replugged, everything, except nothing. I think it's a wire, because when I plug my MP3 Player into the volume control area, I get perfect sound. I tried wiggling the wires and whatnot, and no difference. PLEASE SOMEONE HELP ME

  • I-Trigue 3200

    Hi,
    I've a problem with my volume control unit. I plan to see "in it" (test/replace electronic parts).
    Is there a place to find detailed schematics of the package (at least the remote unit)?
    Thanks for any help

    Creative don't have service if your product is out of warrantee. Mo matter if you want to repair it.
    Buy another one and wait two more years, or go to another mark.

  • My i-trigue 3200 has problem

    My satellite speakers always have some 'sparkling' sound when I listen to songs?Why?

    Do this, then restore your backup from iCloud or itunes.
    goto http://osxdaily.com/2010/11/02/download-ipad-firmware-ipsw/
    and download the firmware for your ipad model. if (like the rest of us) you do not know which ipad 2 you have, then download the first IOS 6.1 ipad2 file following these steps and if you receive a message saying "not for this model, or not compatible" then try the next file.
    small warning, this is a total factory restore so the downloads are around 700mb each.
    1. open itunes, ipad disconnected.
    2. connect ipad
    3. warning restore message appears
    4. (windows users) HOLD SHIFT and click the restore button. This should open a dialogue box allowing you to navigate to the file you downloaded. Select the file and hit ok.
    5. this should start the manual restore, if it fails, download the next file and repeat.
    points for solution welcome.
    Thanks

  • Anyone got or experienced the I-Trigue 3200 2.1? or maybe anyone will know heh

    I was lookin at this to buy and was asking is this sytem LOUD? i mean good and loud like can u hear it outside your house with the door shut and windows of your house? I have the SB 2 ZS card.
    Message Edited by toomuch on 01-08-2005 12:44 AM

    I have these as well they are great as cat says they are not real
    load but they are worth the money... recently purchased a new
    speaker system but the CL system is hooked up to my portable
    DVD player. The sattelite speakers are great for someone
    looking for speakers that will fit in a small area.
    Definantly a great purchase!!
    Jen

  • Creative Inspire T6100

    my old creative set up has broke and now it is time to renew. my problem is.... i have a 5.1 decoder amp it sends the sound out separately to front L,R, back L,R, center and sub. this allows you to power them all separately. i am considering buying 2 sets of the creative inspire t6100 one set for the back L,R and one for the front L,R. and i would like to know what other users of the t6100 think of the system more to the point how many users have had problems. i am reserved on weather creative speakers last very long as my 2 sets of fps1600 have broke ( set the sub went and the other sounds like it is under water) and my 2.1 i-trigue 3200 (5 months old) (center speaker on my set up) is having problems with the wired remote. i am reluctant to switch companies as i think when working properly creative have an amazing sound. i would like to know if any one has any opinions on logitech (rival company if you will) as i have never heard anything from their speaker range. http://images.europe.creative.com/is.../dot-clear.gif

    Hi
    try cheking this link:
    http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=486&view=by_d ate_ascending&page=
    and try do what is explained there
    cumpz
    PS: sorry my english

  • New x-fi extreme, no sound at startup, i'm really pissed off now

    hi there,
    just received my x-fi today, upgraded from a 5. li've. hardware and software installation went fine, but this was an illusion...
    now, a few hours later, my blood is boiling, if this card wasn't so expensi've long ago it flew out the window!
    heres the problem: after reboot, the mode is always set to game mode and no sound at all.
    i've found two "solutions", either switching to another mode, plop sound is here, or opening the audio console, ticking "automatically mute speakers" in headphone detection, and replop sound is ok (but after reboot it's unticked again). reinstalled three times all the stuff, still the same, and the diagnostic gives no errors...
    my system specs: msi k8n neo4-f motherboard, amd 64 3200 cpu, windows xp professional with sp2, card has it's own irq, 9 unshared, speakers are creative i-trigue 3200.
    please help...

    Well, I've tried something similiar. I had choosen "mute speakers when using headphones" and one day couldn't understand why my speakers where muted(forgetting all about my headphones where plugged in).
    You didn't happen to have a couple of headphones plugged in the whole time by any chance?
    If not, it could seem like a software setting conflict or perhaps(although I somehow don't think so, in this case) a bad installation.

  • Creative i trigue 3220 Volume attachment.

    Hi good people, i was using this speaker model(Creative I trigue 3220) for about two years. And then volume controler started to crash when i move the vire. And that started to reapeat more often in result. Now my volume attachment doesn't work at all. And without volume controler my speakers doesn't work too.
    P.S I know that I-Trigue 3220 was launched in the market for quite some time, and production of this product and its accessories have been discontinued. So my question is is it possible to make those speakears work without that volume attachemnt with some program? Or maybe someone know where can i buy that volume controler? So pls suggest solutions. Thank you for attention.

    Hi Xamer!!!
    I am experiencing your same problem and cannot find a solution to replace the volume remote controller.
    I notice that no one has answered to you!
    Did you get a solution then?

  • Printing with a networked Canon iR 3220 and my Intel iMac

    I am at my wits end and I hope someone can help.
    I am the sole Mac user in my company. I have a brand new, shiny 24" dual processor (intel) iMac running OS 10.4.9, that is connecting wirelessly to our network. We have a mixture of IIS and Linux servers (I believe the IIS is solely for the Windows Exchange server) Ther are 30 or so printers on the network and the one I am supposed to be printing to is a Canon Image Runner 3220 (iR 3220).
    I am no Mac newbie, but I can't get the thing to print correctly. I have updated the driver from Canon (v. 1.70PS) and the PPDs (v. 2.25), followed the instructions and it will not automatically select the correct PPD. When I reset the PPD manually, it spools to the printer, but then stops all my print jobs. I try to resume and it spools and stops.
    I have tried adding the printer via CanonIP, LPR, Appletalk (which gets me a message that I am connected incorrectly), setting up a sacrificial altar to the printing gods...nothing seems to work. I've tried using the iR 3200 driver and that doesn't work either.
    Does anyone have any suggestions? I would appreciate any help I can get at this point.
    Mike

    Hello Mike,
    The first thing you need to do is determine if the iR C3220 is using the Canon printer board or the imagePASS-C1/C2 print server option. If you look at the back of the iR C3220, and there is a rectangular box with an Ethernet cable connecting to the copier, and what looks something like a SCSI-2 cable also connected between the white box and the copiers interface board, then you have the imagePASS controller. This device requires a different driver to the PS v1.70 and PPD v2.x you are currently using. It also requires a queue name of 'print' or 'direct' (or 'hold' if you don't want the job to print) and it must be entered in lower case.
    Since it sounds like there are PC's on the network, have a look at their printer setup and see which driver they are using. You can also check their port config to see how they are connecting.
    If the iR C3220 doesn't have the imagePASS print controller and the PC users have the PCL5c driver installed, then you may find that the iR C3220 doesn't have the PS option - it may be PCL5c only. The easiest way to tell is to open the printers web page (called RUI) by entering the printers IP address in your browser of choice. With the default page open, select Additional Functions and then Custom Settings (you may be prompted for a system ID & password). If you get past this the new view will show if you have PS as well as PCL. If there is no PS, then you will have to look at installing the latest version of Gutenprint and selecting Generic PCL5c as your 'ppd'.
    If the PS option is installed, then the v1.70 driver should be okay, although there is a trick to adding it. In the Printer Setup Utility, after clicking Add, select More Printers and then Canon IP (PS). In the new window input the IP address and a queue name of LP. When you click Add the copier is queried by the driver to determine what model it is, meaning that once it is displayed in the printer list it should show the iR C3220. Given that this didn't happen for you (and if the imagePASS is not being used) then a likely cause can be the disabling of SNMP in the copier setup. You may have to get the IT guys to enable this (or at least explain why it is off).
    If you go the other way of manually selecting LPD as the protocol (AppleTalk is not supported by the PS v1.70 driver) then you need to ensure that for the print using you select iR C3220 CanonPS for the ppd. If you see Canon iR C3220, don't use this as it is the wrong ppd for the PS driver - it is there as part of the PPD installer.
    If you want to try using the PPD, then you can use AppleTalk but of course this has to be enabled in the copier, and if your the only Mac then it is likely that it is disabled. Again the RUI page can tell you this or you can print a Config page from the copier (I think you go Additional Functions > Report Settings > Network > User Data List).
    Hope something above is helpful and if not, please reply back.
    Paul

  • Creative 3220 power issue

    I bought a set of Creative I-Trigue 3220 speakers and have made absolutely sure that everything is plugged into the correct sockets and securely. However, although it is plugged into the mains, I turned on the speakers (using the wired controller) to find no power at all. I think the problem lies in the plug supplied with the speakers. It is a 2-pin Euro plug. The box did include a 3-pin UK converter into which the Euro plug is slotted. It has been screwed on and we have tried replacing the fuse, but to no avail. What is going wrong?

    I tried what you suggested and it no longer stated that I needed an update, but it still showed that I had Illustrator loaded on my PC and it's definately not on the PC.  So I decided I would try using the cscleantool to delete illustrator, ever though a thorough search didn't indicate that it was on the PC. After I did that, it now showed that illustrator could be downloaded, which I did and now have Illustrator on the PC.  So it looks like problem is solved.
    PS:  the OPM.db file was not were you indicated, there is not a Library File on my PC, but I searched and found 2 copies of the file, one in AppData/local/adobe/OOBE and the other in Program Files (x86)/Common Files/Adobe/OOBE  and moved them to a folder on the desktop, which after doing so, the program showed that it was there still, but didn't need an update.  I didn't restore the OPM.db files. Everything seems to be working OK.   Do I need to?
    Thank you for your assistance. Phil

  • Would like to acquire ISDN Gateway 3200 Series Firmware

    Dear All,
    Currently, I am using an ISDN Gateway 3220 running version 2.1(1.43)N that is out of warranty. However, I am experiencing an issue and would like to try an upgrade of firmware to the highest version for 3200 series which is version 2.2(1.79)N.
    The firmware is no longer supported and cannot be downloaded. I also understand the risk for upgrading, but does anybody have this firmware that they can provide me with?

    Have you looked in the downloads section?  I know it doesn't list 2.1(1.79), but you might be able to get close.  Just be sure to look at the description of each software version, looks like there are several that are for other ISDN Gateway models other than the one you're looking for.

  • Memory problem with my Nokia 3220

    Hi,I am new here and I have a memory problem with my Nokia 3220.I deleted all of my stuff in galery exept the BlueSquare theme and Nokia Tune but it says that i only have 483kb free memory and galery has 1,7mb memory taken. What should i do ?...I hope you understood my problem and i hope you can help me!
    Shibuy
    Thank You!!

    I have the same problem recently. I bought my nokia 3220, 3 years ago and all was ok but now I download some free themes from a web site and suddenly I realized that my cellphone has less memory. In the phone options says that I have 2,2 MB in my Gallery when actually I have only 800 KB in my Gallery. I don't know what happen!! Maybe it's a virus or what is the solution?? Can I  restart the cellphone ?

  • How to set up a Canon iR 3220-C1 with 10.7

    I'm trying to print to a Canon iR C3220 with ImagePASS C1 from an iMac with OSX10.7. I've tried installing the Canon drivers, which install correctly, but then when I add the printer via LPD with said drivers (setting the queue to print) it just pauses and does not print, or seems to be sending the job indefinitely. I cannot install the imagePass drivers from the Canon website because they are no longer supported in 10.7. Anyone know how to get this dang thing up and running? For the record, there's no LP option in the additional functions menu, and HP DirectJet or whatever it's called also doesn't work. I'm trying to connect to it over the network.

    We just got a new computer running OS X 10.9 Mavericks that we had to connect to our Canon ImageRunner 3220 with imagePASS-C1 printer. With the generic drives and drivers downloaded from Canon I got one of three results: 1. wont' print. 2. prints grainy black and white. or 3. won't print tabloid (11x17). I found a driver that worked. w3.efi.com/Fiery/Fiery=Support/download. I selected Canon, imageRUNNER C3220, PS Print Server Unit-C2 v1.0, All OS. Then selected the English version - Ps_drv_ImagePASSC2_iRC3220_v1.0_WIN_English.zip. I was really skeptical since the file is clearly labeled WIN for windows. But I was at a loss, so I tried it anyway. After unzipping the file I went to System preferences, Printers & Scanners, hit the + to add a printer.  Selected IP to add a printer on the network then put in the following settings: Address: [the printers IP], Protocol: Line Printer Daemon - LPD, Queue: print (lowercase like PAHU said), Name: [whatever you want to name your printer], Location: [leave blank], Use: [Select Other] and navigate to the unzipped files and select EF6M6060.PPD. Then add the printer. This worked and gave us the ability to print double sided.

  • MSI Neo 2 plat w/ amd64 3200+ win will no longer post , need help plz.

    Koolance watercooling case
    enermax 431w ps
    Msi neo2 plat with updated bios cant remember what version but i had to flash it as soon as i took it out of the box to be able to use sata raid trouble free.
    amd 64 3200+ winchster 2ghz  @ 2.6ghz 
    1gig (2x512) crosiar twinx DDR500 3.4.4.8
    dual 36gig wd raptors in raid 0
    sapphire x800xt
    sb audigy 2
    3 optical drives
    floppy drive
    6 80mm fans
    System has been pretty much solid since i built it back in Dec 2005, The Power supply i've had for 1-2 years, last few months i would start up my pc and then at random between 15 secs or 30 mins the pc would just shut off, and sometimes it wouldn't do it at all. I didn't really think nothing of it. About a month ago i was about to play WoW (world of warcraft) and my pc glitched out and the sound screeched and then i shut it down, i reset the comp and no post, i then reset the cmos the pc then posted and i changed my bios settings back and i was up and running again. I could run any games, half life 2, quake 4, WoW and they all ran great i still got the random shut downs if it did shut down when i restarted it , it would shut down again. (odd) Tonight i was on chatting with some friends and was about to play some counter strike then changed my mind and i started up WoW everything loaded up great, got into the game and played for about 2 mins then my screen went black and the sound screeched, the monitor had no signal and my pc was still running, so i turn the thing off and reboot, no post and no beep code. I proceeded to reset cmos and reboot still nothing i checked the D-bug thing and i was getting a processor intialize error, so i thought i fried my cpu, i took off the waterblock and pulled out the cpu cleaned it up reapplied AS5 and then re-seated the cpu, tried to boot and nothing, i then started to pull ram out and swap slots and single the sticks out and that did nothing. I then stripped my pc down to barebones reset cmos and used beap codes, with just cpu seated i got a ram error code, put in a stick of ram then i got a video card error code put in the vid card then i was back where i started, no beep code and the d-bug thing was hanging on processor initialization. It could be my cpu although in my other comp i swapped cpu, i put the enermax 431w into the other comp nf2 w/ amd 2500 barton and it posted and ran fine, although when i used the ps from the other system in the one thats not posting it would post either but it was only a 300w ps. I don't believe its the cpu, the 20pin connector on the power supply has about 4 pins where the pastic shell has browned from heat or something, so i should replace the ps regardless but i'm not positive thats whats causing my issue. Anyone with any suggestions i'll pretty much try anything at this point.
    Thanks for taking the time to read through my problem.

    Quote
    the 20pin connector on the power supply has about 4 pins where the pastic shell has browned from heat or something
    This is not a good sign, this could be an indication of to much amp being drawed.
    This could be due to a poor connection on the P/S connector or the connector of the MB or it could be due to a device like your CPU, ram, graphic card or so on drawing to much amps.
    Check the MB for any signs of swelled, leaking or bursted caps, also look around the MB P/S connector for any resistors that have changed colors or are burnt.

Maybe you are looking for