I turned on my system too early before the ups properly turned on n later i forcefully offed it by holding d power button n later when i turned it on its turnning off by itself

plz help me how to correct my error n i check for disk utlities n it showed me a error "key is not found" something n cant be repaired n backup files n re-instal os so wht to do?

Do as instructed. Backup the computer if the computer is still working. Then you will need to do ONE of the following to repair the drive:
A. If you are using Snow Leopard.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer.  Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the  "C" key.  Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.)  Click on the Partition tab in the DU main window.  Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer.  Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X.  You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
B. If you are using Lion or later.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
If this does not repair the problem with your hard drive, then the drive may have failed and requires replacing.

Similar Messages

  • I have IPhone 4S in cold -7 off and says that there is no charge ... come home I try to include all of a sudden turn! Charge as it was before the spree, what to do?

    I IPhone 4S in cold -7 off and says that there is no charge ... come home I try to include all of a sudden turn! Charge as it was before the spree, what to do?

    That's too cold.
    Apple designed this diagram of ideal temperature for the Iphone:
    Everything below 32ºF/0ºC is too cold and the device's battery is not going to work as espected.
    Take a look at this:
    http://www.apple.com/batteries/iphone.html

  • When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

    Apple's response to my email:
    "I understand that you can't update your apps using your iPad.
    Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
    Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

  • Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.

    Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.

    OS X Version Number?
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

  • My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    My MacBook Air is not charging and not lighting to orange and green, try what I saw in the net by pressing (shift-ctrl-option   power button) but still same problem not charging,only it turned off but when I turn it on again nothing happens.. Pls tell me

    Wrong forum. This is the iPad forum.

  • IPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    iPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    Hello TJLapplesupportcom,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps below to resolve this issue you're having with your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • Before the selector value reach a Case structure I need to stop it until a push button is pressed. How to do?

    Before the selector value reach a Case structure I need to stop it until a push button is pressed. How to do?

    altenbach wrote:
    UliB wrote:
    simply wire your selector value through a while loop. Stop the loop with your button. After the loop stops, the value will go on to the case structure.
    Hmmmm.....
    Hello altenbach,
    roflol .
    Thank you for the link to 'A Field Guide To LabVIEW Objects - Selfish Loop'. I'll keep that in mind, when answering other questions with while loops.
    Uli

  • Preflight droplet process returns too early – before it's done

    I'm calling an Acrobat preflight DROPLET from program that I'm writing, and I need to know when the files are ready, that is when the preflight fixups are done.
    I need to know this in order to go on with some other file system stuff in my program, that needs to be done after the preflight fixups.
    I guess the droplet just tells Acrobat what to do, and then exits. The Droplet process stays up for a while but exits before the work is done.
    There is an question from 2009 asking the exact same thing, but no answer.  Preflight droplet returns too early
    Since it's in a locked section of the forum I venture to ask the same question now, six years later.
    Checking the modified dates of all files does not seem to work since a preflight obviously does not alter files that are not in need of being altered.
    I'm on windows, and I don't know whether this is a platform dependent problem.
    What should I do?
    Thanks,
    Andreas

    This is not a good way to do it. But this is the way I do it now...
    It seems to work but there is no guarantee that it will work in the future, or even on all machines.
    private static int WaitForAcrobatReady() {
      // Get the current Acrobat instance.
      var app = new Acrobat.AcroApp();
      // While a preflight (droplet) is running, app.GetNumAVDocs() will
      // not return ANYTHING, it will just hang.
      return app.GetNumAVDocs();
    To sum up the efforts of the last weeks: Acrobat doesn't seem to be made for inclusion in other automation jobs. This is just another thing that doesn't work.
    (I had to use the C# library PDFSharp to do other things that Acrobat can do really well only that it's not possible to set those properties, or start that kind of actions, from "outside".)

  • TS1587 My friend has a G4 that will NOT turn on at all.  The monitor power button will light up, but monitor won't turn on; the the computer power button lights up when pressed but won't stay on and nothing else happens.  He said it USED to at least turn

    Anyway, not sure if my question was sent, so here it goes:  My friend's G4 won't power on....the power button lights up briefly when pressed, but nothing happens....and, cannot even get the montior to power on...does the same thing.   He said it used to at least turn on, but now it's doing this.   Help!!??  What should we do??

    If you are able to use a multi-meter, you can test to see if the power supply is culprit. Use the Power Mac G4: Power Supply Voltage Test  (Sawtooth G4) document to aide you in the proceedure.
    If not the Sawtooth, Power Mac G4 (Gigabit Ethernet): Power Supply Voltage Test.
    If a Quicksilver, use the pinout of the QS PSU connector here:
    http://www.xlr8yourmac.com/tips/MDDps_mods/MDD_PSMods.html#update
    and a testing description here:
    http://www.jcsenterprises.com/Japamacs_Page/Blog/D275729F-09DA-4FBB-96B3-BEEEB2C 04619.html
    The test description is for a MDD, but the basics are the same.
    If a MDD,follow my instructions in the linked articl above.
    One should also try a PMU reset:
    http://support.apple.com/kb/ht1939
    One should also  replace the 1/2 AA PRAM battery.
    Also, check that the 20, 22, 24 pin connector is properly fitted to the motherboard, and that the wires are properly inserted in the connector. There is also a 10 wire ribbon, which goes from the motherboard to the power button board. Make sure that the ribbon is firmly connected at both ends, and that there is no apparent damage to the ribbon.
    If the power supply tests good in a MDD, the power switch board could be suspect.

  • FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

    Please help ASAP.
    Specs: IOS 10.6.8
    Processor 2.4GHz Intel Core i5
    Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
    Editing with FCP 7
    When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
    The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
    How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
    This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
    Thanks,
    MV

    What is your source material? Is it H.264? FCP does not work correctly with that material.
    Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
    Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
    MtD

  • How can I restart my iPhone 4 if the lock/power button doesn't work? I know I can turn it off using the assistive touch button but how would I get it back on?

    Help me!

    Has to be a working phone to trade it in at an Apple Store (recycle) towards a new one. You can do an out-of-warranty replacement for $149 USD and you will get a service replacement iPhone 4 with a 90 day warranty. Make a Genius Bar appointment before you go.

  • Too early for the retina, too late for the non retina? Which one?

    Hi everyone,
    Sorry for yet another "Which MBP should I buy" post but I have read through all the of the discussions I can find on this topic as well as around the web.
    I am a digital designer who is currently using a PC only because up until now I have never been in the financial position to transition over to Mac.
    I am currently trying to decide between getting a a 15" Mac Book Pro or 15" Retina Mac Book Pro.
    15-inch: 2.6GHz
    2.6GHz quad-core Intel Core i7
    8GB 1600MHz memory
    750GB 5400-rpm hard drive1
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
    High res anti-glare screen
    versus:
    15-inch: Retina display
    2.6GHz quad-core Intel Core i7
    8GB 1600MHz memory
    512GB flash storage1
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
    I will be using Adobe CS6 Photoshop, Illustrator, Flash and Dreamweaver sometimes all at the same time. I occasionally have a video project where I will be using Premiere and After Effects. I am also looking into upskilling myself and becoming versed in at least basic 3D modelling. I am looking at a MBP because portability is important.
    Given my job, going retina seems like a no brainer but I have a few concerns:
    Speed, processing power - which will suit my needs?
    This is an investment for me, I want it to last at least 3-4 years:
    Is getting a standard MBP now just too late and bidding in the past?
    Will resale of a standard MBP suck in 3-4 years?
    In 3 years time will I need an upgrade, and if so, how will I even do this with a virtually unupgradeable (from what Ive read) Retina MBP?
    About 80% of the time I plan on hooking up the MBP to a Thunderbolt display - whats the point in a Retina?
    If I don't get a Retina and I need to start designing Retina graphics, will I be faced with added dificulty because I use standard MBP?
    Is it realistic to assume Retina graphics won't become mainstream for 3-4 years allowing me to bide my time with a standard MBP, upgrading to a Retina later?
    At work I use a 2-3 year old iMac and the screen is already magical compared to my PC and it seems to do fine for me. I've been in store and played with both and I am genuinely confused. I just feel like getting a standard MBP is like jumping on a train when it's already reached it's destination.
    Budget wise I can afford the base level Retina MBP I outlined above but if I can save money, that'd be ideal. Being me I will automatically chose the best possible solution but I need to be rational about my needs. Someone please help, I just want a Mac!
    Thanks in advance, any help is much appreciated

    kytim wrote:
    I need to be rational about my needs.
    In general
    Retina cannot upgrade RAM.  Storage can be upgraded, but more $ than upgrading the non-Retina unit.
    Non-Retina unit can upgrade RAM  base-4 GB to 16 GB for about $85 (cf. OWC.)  HD can be replaced with SSD or larger HD.   
    Therefore lack of "upgradability" in Retina
    No optical drive in Retina.
    The non-Retina has  Ethernet and FireWire ports, and a slot for a secure cable- the Retina  none of these ports.

  • For some reason all my F buttons don't work expect F3 and F4. Its like it disabled itself

    It happens during my road trip.

    Try pressing the fn key as well as your f keys.
    Check System preferences/Keyboard/Keyboard Tab
    verify your settings.
    Do smc reset
    http://support.apple.com/kb/ht3964
    Reset the pram
    http://support.apple.com/kb/ht1379

  • IDisk quits too early, launch too late

    i found iDisk is quitting too early, before the apps close. So any app with preferences saved on iDisk will have problems.
    Also it launches too late, after the app like Things launch and can't find their database
    I thinks is a very bug SL bug.
    Also links from iDisk saved in Finder left bar disappear after at every startup

    kytim wrote:
    I need to be rational about my needs.
    In general
    Retina cannot upgrade RAM.  Storage can be upgraded, but more $ than upgrading the non-Retina unit.
    Non-Retina unit can upgrade RAM  base-4 GB to 16 GB for about $85 (cf. OWC.)  HD can be replaced with SSD or larger HD.   
    Therefore lack of "upgradability" in Retina
    No optical drive in Retina.
    The non-Retina has  Ethernet and FireWire ports, and a slot for a secure cable- the Retina  none of these ports.

Maybe you are looking for