I updated and it kept freezing up. i deleted it. put IE on and have no hyper links now, fire fox won't work at all either, this is on my work comp. please help me now

i upgraded on my work comp and it kept freezing up. i had to delete it from the comp. i can't us IE because the hyper link process is now missing for some reason, it was there before. i can't put firefox back on because it simply won't work. please help me because this is happening on my work comp.

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

  • I have updated itunes and the newest software. My home button does not work.  Please help

    I have updated itunes and the newest software. My home button does not work.  Please help

    It could be that your button has justy gone out.  You may try getting compressed air to blow out any dust in there.  If that doesn't work, you may have to get your button and ribbon replaced.

  • If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

    If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

    Nope. I do the same exact thing. If you have DVD's and blu-rays you can't download a free application called Handbrake. You can set it to Apple TV2 automatic format and they will come out as playable m4v's that can play I'm iTunes. All you have to do is turn on Home Sharing in both iTunes and your Apple RV and you'll be good to go!

  • I have a stuck CDR disk in my MacBook. I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

    I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

    I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
    Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
    The case can get bent down by picking it up with your thumb pressing down on the case above the slot.

  • When i use the mail on my i phone and outlook simultaneousaly, the outlook does not download emails and says "account already being accessed", i want both to work together, please help.

    when i use the mail on my i phone and outlook simultaneousaly, the outlook does not download emails and says "account already being accessed", i want both to work together, please help.

    This is the ipod touch forum

  • I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    Run the 10.5.8 Combi Updater again, then reboot your Mac.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • Images in slideshow became BROKEN CHAINS. Suddenly won't work. Please Help!

    I need to give this iDVD to my friend who's leaving the country TODAY. Your help is much appreciated:
    I made the DVD and it was all running smoothly and seemed to burn OK, but when it was done burning most of the pictures (but not all) in the slideshows turned into a broken chain with black and yellow stripes on the top and bottom. Why did this happen?? I don't know why they became this, there was no problem before. Some of the pictures are OK, seems random.
    If you could tell me how to get my pictures back to replace these broken chains so I can reburn the DVD where all the pictures work. Please Help!
    iBook G4   Mac OS X (10.4.10)   iDVD 5.0.1

    Yeah I realized I had moved images to a different folder. I moved them back and am burning a new DVD right now. Thanks for the quick response & have a great day! :]

  • IPod Updater Won't Work. Please Help!!!!!!!

    HI!!!,
    i tried opening up the iPod updater 2006-03-23 but when it does open up it says. 'iPod Universal Updater has encountered a problem and needs to close. We are sorry for the inconvenience.' and then the choices Debug, Send Error Report And Don't Send.
    What Should I Do:
    P.S. It Said The Same message Error For iPod Updater 2005-10-12
    So can You Please help.
    many thanks In Advance
    Cheers,
    Ilbron

    The iPod updater is now contained in iTunes version 7 or later. Why not use that?
    Maybe Apple are not hosting the older standalone updaters any longer.

  • Itunes 7.5 won't download at all. I'm losing it.. someone please help!

    Help me please I'm going crazy. I have tried at least 5 times to download the new version of itunes because I got a new ipod for Christmas. I have read other posts and tried the support options on this site. Nothing seems to be working. I have a really slow internet connection and I think that may be the problem. Out of my many attempts (each taking at least an hour) the furthest along it got was 20%. That was a miracle, but then it showed up with a "win26" error or something. I deleted my temp files, and have restarted. Is there anything I can do? It just stops downloading after it's only like 4 % done. Can apple send me a disc or anything so I don't have to do it over the internet? I'm so sick of dealing with this. I don't even have music now because I deleted my old itunes.
    Any help?

    i'm not very computer savvy, but i dont think that it is your computer speed....i think it is the itunes 7.5....everyone seems to be having problems with it! i tried to upgrade mine and have now lost my entire itunes and am on here trying to figure out what to do! i'm sorry i can't be any help but wanted to let you know that i don't think it's your connection speed that is the problem!

  • Multi-angle won't work..please help!

    This problem is using version 2.0.0 (sorry, I hope someone out there still remembers) and has been replicated on two seperate computers. The first is an ibook g4 1.33ghz with 512 ram...the second a dual g5 2.0 ghz with a 2 gigs of ram. The problem occurs during the build. On the g4 the problem crashes the program, on the g5 there is a internal muxer error and the build process cannot complete. I first noticed the problem with a big project that was mostly audio with slide shows...so I stripped it down to the bare essentials and the problem is still there. This is what I do: new project> import 3 aiff files (16bit/48khz) and 2 jpg images > copy the first jpg into a slide show 3 times and add one aiff to each slot > convert to track > add the second jpg into video track 2 under each of the first jpg's (the size auto-matches) > make basic menu to start playback of slideshow > simulation works fine, angle switches fine > crashes or stops on build (depending on computer using)
    things i've tried that haven't worked > different jpgs, ones that have the same dimensions > fix markers in the track menu preferences > tried using my internal drive instead of external for both originating files and build files > if i delete the second video track of jpg's the build goes fine so this is definatly a multi-angle issue...I've heard of bit-rate issues with multiangle, but these are jpg's, there is no video...
    Someone PLEASE help me
    Thanks

    Ok thanks for the help... I don't know how helpful it will be though... let me explain what I'm trying to do, which will explain why some of your suggestions wouldn't work. I record live concerts and I'm just trying to fit a full concert onto a dvd. I would like chapter markers at the beggining of every track, though I would like absolutly no pauses between tracks (tracks have been cut to cd sector boundries of 1/75 second, which seems to work fine on DVD even after converting from 44.1 to 48. ). I would like 2 menus ... a welcome screen and a setlist screen linked to each song. I would like the show to play in it's entirty with a bands logo on the screen (which is the first JPG) and have the second angle just black (to save tv sets from frying). If the show is 20 songs then I create a 20 slot slide show with the bands logo and the 20 songs. I then covert this to a track...as this is the only way to add an alternative angle. If I don't add 2nd angle of black, the burn goes fine, if I do then it crashes.
    Now if I were to encode the jpg's to mpeg2 before adding to the project this would mean I need over 3 hours of each, cut in 20 different spots that correspond exactly to the audio.
    Now the quality of the audio is very important to me so I'm not willin to use any lossy compression scheme. The whole disc is really just for listening too and is of an audiophile nature. Now I understand AC3 does a pretty good job, which is fine for movies, but for my purposes I need it to be exact. So this means I would have to fit the 3 gigs of audio along with 6 HOURS of mpeg2 video encoded from the 2 simple jpg images that take up less than a mb themselves. This is simply too much data, I can't fit it onto the DVD.
    What's nice is what DVDSP is suppose to do is convert the jpg's for you and they only then take up a very small amount of room, and stay on for the full 3 hours none-the-less.
    So you see any workaround that envloves making the slideshow as video in FCP beforehand won't work because I'm going for 2 angles at over 3 hours with uncompressed audio.
    Now you say that DVDSP converts the jpg's to mpeg2 anyway so I figure it must just keep looping the same video over and over to save room..because there is no significant increase in size from adding the jpg. It's definatly not making a 3 hour mpeg2 file. So if I encode the jpg beforehand, say for 30 seconds...how do add it to the project in such a way that it just loops the video over and over to save room (the same way it does internally with the jpg) Keep in mind I need to make the video fit the audio tracks exactly with chapter markers inbetween. When adding jpg's to a slideshow and then converting to a track this is done automatically and when I add the second jpg to V2, the length auto-matches to the chapter markers. So it's very easy when working with still pictures ... but how do I do it so simply with a 30 second mpeg2 clip? And make sure that it's always referencing the same clip without having to add it umpteen times and thus uincrease the disc size beyond capacity.
    Now as for the multiangle encoding fix ... lets say I proceed with the two jpg images as they are and let DVDSP do the encoding... I want to make sure both streams are compatible which is probably why the build hasn't been working.... I know the markers and length are good because the slideshow added them and the second jpg autosizes to them...and i have fix markers checked in track preferences. But how do I make sure that they have the same GOP structure and that they will have the same bitrate? Now the pics are very different so a different bitrate is expected. One is just black and the other is a band logo. But I tested it with identical pics in both video tracks to see if it was a compatability issue and the build still failed.
    Ok so I don't neccesarily need to use jpg. The band logo is jpg but I can convert it...the black is just a slug from FCP exported as a still. What's the best format to use for what I'm trying to do? What has the best success rate for encoding? Also you mention having access to a decent encoder. For $1000 i was hoping that I was getting one in the package ... bewtween FCP, quicktime, compressor, or DVDSP ..it's rediculous that a decent encoder wouldn't be included... what would you consider a decent encoder ... and of the ones I have which one should I be using (for future projects involving video)?
    I know this is a tough one, I appreciate any help that can be given.

  • I have a iPad 1. All of a sudden, when I turn it on, the screen is grayish/black. I tried turning it on and off, but the thing won't work. Please help! I just brought it like 3 months ago!

    Ok so, I own an iPad 1. I was using it and you know playing games and all. All of a sudden, the screen went black/grayish. I payed a lot of money for it, this is the second one I had to buy because the first one I owned broke. Could some water have gone in it? Please, help me. I can't buy another one. Please, reply ASAP.

    Might be hardware failure. Take the iPhone to the nearest Apple store
    for evaluation. Make a Genius Bar appointment to avoid delay at the store.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

  • I get the message "an error occurred while loading your favorite themes" and my persona rotator won't work. Please help?

    I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.

    In order to switch to another persona that you had previously installed, do the following:
    #Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
    #Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
    #Find the one you want to use and click the ''Enable'' button.
    To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

  • Control centre won't work! Please help!!

    Hey guys, I need help I have a problem where my control centre won't come up on the home screen or apps only on the lock screen. Please help!! Also my device is a iphone 5s n and it is iOS 8.1

    Hey there iThings,
    Since the Control Center is not opening anywhere but on the Lock Screen, I would start by toggling the option to Access on Lock Screen off first:
    Use Control Center on your iPhone, iPad, and iPod touch - Apple Support
    Settings > Control Center.
    Then quit all the running apps on the device:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the phone and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Alarm Clock won't work. Please Help!

    My alarm clock won't work. When I set it to the time and it goes off , the sound does not come on. Can someone please help me.

    I have the same problem. The iPod is only a week old and the alarm worked on 30th of December, but today (1st of January) it has refused to work.
    I've tried restarting the iPod, force quitting the clock, changing time zone and I've even tried setting an hour ahead & behind, in case the problem was connected with the daylight savings setting on my Mac.
    The alarm won't work and I'm stumped!
    Edit: just found this on another thread about this very subject...
    http://mashable.com/2011/01/01/iphone-clock-bu/
    Message was edited by: Graham.R

  • Why won't my video play? I put a video in a template and it won't work! PLEASE HELP!!!!

    Please help! I try to put a video into a templete I have and it wont play, I dont understand! I have tried .avi .wmv .mov EVERYTHING please help, I am new the after effects and I really want to learn it! Thankyou to the adobe community for making this question possible!

    You haven't given us enough information to help you.
    Exactly what are you doing? Exactly what have you tried?
    The more details that you give, the more likely we are to be able to help you.
    Please, take a step back and work your way through the basic learning materials here so that you know what you're doing. Doing so will greatly decrease frustration.

Maybe you are looking for