I upgraded iTunes on my pc and now it does not recognise any of my iPods or iPhones?
I upgraded my pc with the new iTunes and now it does not recognise my iPod or iphone
The apple ID as I did not see anywhere just for email address , but then the ID is the email address, original ID does not work with new or old password, but is displayed on the apps page on iPod when trying to update apps, so ID is changed on PC and all is well it is the iPod that isn't
Similar Messages
-
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
i changed the lan uage of my iphone 3gs from english to spanish and then back to english. now it does not recognise enghlish but seems to be using a mix of languages. how do i get it back to english please?
Please check in Settings: General: Keyboard: International Keyboards how many there are and which.
If there is more than one you can either delete the ones that you don't use, or if you want to type on different ones at different times you can change between them using the key with a world that appears when you are using the keyboard. -
I don't know what happened, but ps6 is no longer working. The window is there, etc., but cannot pull in files to work on. I am on MAC. Help?
I have the same problem. Any solutions?
-
Icalendar no longer works on the PC that I am using. It did in the past and now it does not. Coincidentally, this happened after my iphone was stolen and it was replaced with the iphone 5s. Does it have to do with my settings?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?
You've done great so far to upgrade to Leopard & install more RAM. Now install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
After you install the 10.5.8 update, click on the Apple in the menu & select Software Update. You will then be informed of some application updates. iTunes may be one of them. Then click to install the app updates.
Cheers, Tom -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I just updated itunes and now it will not play any of my music. What is wrong?
I just updated to the new version of itunes and now it will not play any of my music. It says that it is playing but nothing happens.
Hi ryanmar,
If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Regards,
- Brenden -
How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
I get this error message every time:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-05-28 02:28:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.4.130416
Crashed Module Name: Microsoft Word
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x00938638
Blame Module Name: Microsoft Word
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x00938638
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
I tried to remove the plist files, but it hasn't worked! Please help!What version of Microsoft Office for Mac do you have?
Pete -
I updated itunes Jan 23, 2014 and now it will not open
I updated itunes Jan 23, 2014 and now it will not open
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!
Hi
Can you use the mouse to access and start System Preferences?
When you rest the mouse over a dock icon, does its name pop up?
What happens if you open an application by ctrl-clicking on the icon then selecting Open?
Bob -
I just upgraded to 10.7.3 and now I can't install any applications.
I just upgraded to 10.7.3 and now I can't install any applications. Everything else in the OS and in applications seems to work OK. After the installers ask for the system password, they do nothing. I doesn't hang; it just won't proceed any further in the install process. I can press the back button and it seems to do that just fine. I repaired the disk permissions, but to no avail.
After I installed 10.7.3, I tried to install an updater that was listed as being recommended for Time Machine users. That was the first time I tried to launch an installer of any sort and it did the same as above. I've gathered since then that the update wasn't necessary and was already included in the 10.7.3 I loaded today.
Any hints?I'm having a similar problem after installing 10.7.3 and the Messages beta. I've unistalled Mesages with little bit of trouble.. Linc, I followed the step given in your final post any help would be appreciated.
A screenshot of my actual error. I get this error not just for Flash, but also Handbrake. I receieve th error even when I try using a programs automatic update. However, not suprisingly I do not get the message when using Apple's software update.
Step 1 results
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.ips (3.2f8)
com.cisco.nke.ipsec (2.0.1)
com.symantec.kext.SymAPComm (11.1.2f17)
Step 2 results
org.macosforge.xquartz.privileged_startx
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.avscandaemon
com.micromat.TechToolProDaemon
com.google.keystone.daemon
com.bombich.ccc
Step 3 result
org.macosforge.xquartz.startx
com.symantec.uiagent.application
com.prosofteng.DGMonitor
com.micromat.TechToolProAgent
com.google.keystone.root.agent
com.google.Chrome.framework.service_process/Users/damian/Library/Application_Sup port/Google/Chrome
com.ecamm.printopia
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109
Step 4 result
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
Frameworks
NyxAudioAnalysis.framework
PluginManager.framework
R.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
Unused
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.google.keystone.agent.plist
com.micromat.TechToolProAgent.plist
com.prosofteng.DGMonitor.plist
com.symantec.uiagent.application.plist
org.macosforge.xquartz.startx.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.google.keystone.daemon.plist
com.micromat.TechToolProDaemon.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.avscandaemon.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
org.macosforge.xquartz.privileged_startx.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
TechTool Protection.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymDaemon.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
/Library/PrivilegedHelperTools:
com.bombich.ccc
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
Google Camera Adapter 0.component
Google Camera Adapter 1.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Google Earth Web Plug-in.plugin
WebEx.plugin
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E9E876AD-F4B4-43BE-A4F2-EC7 33492E799.plist
com.ecamm.printopia.plist
com.google.Chrome.framework.plist
Library/PreferencePanes:
Printopia.prefPane
Step 5 result
AdobeResourceSynchronizer, iTunesHelper, Air Video Server -
My phone will not come on because it says i need to plug it into itunes, so i did and now it will not restore. I have changed the USB cable, used different USB ports and used a different computer however errors still keep happening. Please help.
You need to tell us exactly what the errors your getting say.
-
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK.
I have a WRT54G v8.1. I upgraded the firmware, and now it DOES NOT WORK. It keeps telling me that this router is not supported. There is no firmware to roll back to. It worked fine until a power outage. HELP!
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router. -
I have updated ITunes and now it does not work
I have updated ITunes and now it does not work. It worked before the update was installed, now it doesn't. I cannot un install it either...
Use this application to uninstall iTunes and all related components
http://support.microsoft.com/mats/program_install_and_uninstall/en-us
Maybe you are looking for
-
How to get external ip in adobe air app (as3 script)
hey guy i am so sry if i am asking a repeated question but i could not fine any result i am creating a 2-player game by usinig socket in air (flash builder ide) and as u know one of the player need to connect to other one bye useing his external ip,
-
You are not recognized as a user in the SAP customer notification system
Hello, we are in OSS registered as CCC. I am able to send notifications from our SolMan to OSS with components(instalations) which are registered under out SAP customer number(our SolMan instalation etc.). When I want to sned notification for our cus
-
Planning job: Processed with errors
Hi, A planning job was run. In MC8I (Check Mass Processing), i see the following: Job: Variant: Info Structure: Version: Planning type: Created: Status: Processed with errors Although the status is Processed with errors, but the values transferred to
-
Can't open mail and app store. I've tried to reinstall Maveriks using recovery but I get a message that I can install using my apple ID. Any help??
-
Want to Run a Long Action Really Fast?
Do you have any actions that have 20 or more stpes in them and may take 30 sec or longer to run? Do you want to run that same action in just 3-5 seconds? Try this, start the action running and then quickly click off of PS so that another app is made