I upgraded my AirPort to 5.6.1 and can no longer print to my HP Photosmart C6180 all in one printer from my MacBook? - help.

I upgraded my Airport to 5.6.1 and it stopped printing from my HPPhotosmart c6180 all in one printer. I have a Macbook with version 10.6.8
I also have a Xfinitiy internet connection. Help

Figured out that as long as a scan is unreadable & RAW, it can never be used or open. Boo.

Similar Messages

  • C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade

    I loaded the software for my Photosmart C6180 all-in-one printer as part of a computer upgrade from Windows XP to Windows 7. My printer is networked and everyone else in the house can print to this printer with no problem. However, whenever I try to print a document I only am able to print the last page of a multiple page document. I have uninstalled and reinstalled the driver/software package  multiple times to no avail.
    Any suggestions? Thank you.

    This document may offer some help:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem

    I've been using Elements 10 on my windows 7 machine editing RAW/NEF picture files taken with a Nikon D40X camera with no problems. I upgraded my camera to a Nikon DX7100 and can no longer load my RAW/NEF into elements 10. Is there a compatability problem with my new camera? Will upgrading elements to a newqer version solve the problem?

    NEF's for the D7100 should work with the latest version PSE13
    You can download here and try free for 30 days:
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

  • Upgraded Playbook to 2.0.1.358 and can no longer sync with PC

    I upgraded to the latest software version for the PlayBook via wi-fi. I had no issues until I attempted to sync my PB with my pc to copy over pictures and videos from my PB. I do this sync about every 3 weeks or so. When I first plugged in the Playbook to my pc (Sony Vaio w/ Windows 7) I received a message about drivers being installed. When my Playbook was acknowledged by  BB Desktop Manager it incorrectly read that my PB software version was 0.0.0.0 and prompted me to upgrade. I downloaded and installed the software (again). All looked successful again, however when I attempted to access the Media Sync options I received a message that "media services are not available" and that "your blackberry device is not compatible with this features". Now, when I connect my PB to my pc via USB cable it does not even trigger DM to open. If I manually open DM then it recognizes that a PB is connected and starts a full back up. If I let the back up complete then it triggers me to do an update to the latest software version (which I already have installed but DM continually shows that my PB software version is 0.0.0.0). If I install the upgrade as instructed then I am prompted to disconnect and reboot the PB. When I do this loop starts all over again. A full back up starts and I am prompted again after that to install the latest PB software. How do I get out of this loop and back to being able to sync all my media from my PB to my pc. Also, when I have my PB connected and I look at Windows Explorer, it does not list my PB as a drive. However, if my PB is connected to my wi-fi network I can see it on the network. I copied my pictures/videos via the network (turned on sharing on the PB) as a workaround but this is not how I wanted to manage my file transfers. PLEASE HELP. I spent all day yesterday googling for answers and similar experiences by others and I don't know how to fix this. I am tempted to create an incident request with Blackberry/RIM to resolve this but thought I would try here first. Appreciate any responses.  

    I to have exprianced this problem.  I upgraded my os and now when I try to connect my Playbook to my computer, the Desktop Manager does not connect and prompts my to upgrade.  After turning off my Virus Protection, firewall, trying several times, rebooting both playbook and computer, I started to install the upgrade through Desktop Manager.  After a few minuites I decided this was probably counterproductive so I canceled the install.  Not sure but since the upgrade, my computer will not connect to the Playbook.  Ideas?

  • I just upgraded to the latest version of iTunes and can no longer sync

    Worked fine before upgraded of iTunesto the latest version now cannot sync iPod touch. error message is that will be wiped and replaced by library which is too big for the device so I have to wipe it and reinstall  manually which takes at least four hours. Cannot backup as not able to in iTunes and do not haveiCloud. Use win7

    Again:
    You said: " Cannot backup as not able to in iTunes" What happens when you try to backup?
    What are you doing when you get this message: "I have followed the solution but am not given the choice to select the device."?
    What do you mean by: "The dates and times on both match."?
    You are not telling use what you are doing and what happens when you do it.

  • Just upgraded to iOS 7 and can no longer take a video, can only take photos

    just upgraded to iOS 7 on iPad 2 and can no longer take a video, can only take photos

    Try sliding the words Up/Down or Left/Right to select the various modes.

  • After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

    After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air.  When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported.  The HP site has not been helpful in resolving this issue.  My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

    Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem.  The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

  • I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated

    i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
    i have also tried 4 different chargers both official apple and non official

    i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means

  • HT5569 Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

    Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

    No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.

  • HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

    I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
    Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
    I have tried all the solutions provided on the HP website but none of them worked.
    I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
    If some genius can help me I will pray for him/her that all his/her wishes come true.
    Thanks you in advance.
    Imroz Baig

    I just got my HP Deskjet F2120 working in Windows 7.  Here's how:
    Insert the setup disk in your CD/DVD drive.  Choose to view the files in Explorer.  Scroll down to the file "Setup," which is identified as an application.
    Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
    Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
    ALSO check "Run this program as administrator" at the bottom of the window.
    Press "Apply," then "OK."
    Now you can double-click the "Setup" file and run the software installer.
    It will 100% work inshallah...

  • I just upgraded to Yosemite and can no longer connect to the WIFI  any suggestions

    I Just up upgraded to Yosemite and can no longer connect to internet - any ideas?

    I have the same problem after loading OS X 10.10 Yosemite on my MacBook Pro (Late 2008).  Wi-Fi (Time Capsule) connects OK, then I open Safari and it waits for a minute and then gives me a message that it can't load the page because I'm not connected to the Internet.  The Wi-Fi is fine.  When I run the network analysis, it shows that everything is fine up to the Internet; the dots are red after that.  I have another MacBook Pro (Retina, Mid 2012) and it loaded and runs with no known problems (so far).  I am writing this message on the Late 2008 MacBook Pro, so you can see that there is no problem with the Internet connection.  It is a Yosemite problem.  My iPhone and newer MacBook Pro connect with no problem.  I loaded Yosemite TWICE, then ran the Disk Utility and fixed some disk permissions but there were no other problems identified.  Restarting after reloading Yosemite and the same problem is there.  Restarted after running the disk utility and fixing disk permissions and it still can't connect to the Internet.  Same problem.  Does anyone have an idea how this might be fixed?  What's going on?  Thanks for your help.
    Update:  Air Drop also doesn't work.  Thanks.

  • I have upgraded to io6 and can no longer play gnomevillage.  Can anyone please help me?  Thanks.

    I have upgraded to io6 and can no longer play gnomevillage.  Can anyone help please.  Also I have changed my password on the desktop (which I knew) but now when I log into the ipad it says I dont know my password.

    Kurt Lang wrote:
    Quark XPress 8 has a few of those PPC only tools, too. Like they they forgot to update them or something.
    They were already at v9 when Lion came out and decided that official support would be for v9 only; see here.
    According to this, the only thing PPC in v9 and v8 are video encoding for SWF export -- looks like an XTension according to System Profiler. Given their position of not officially supporting v8.x in Lion, that will probably always remain broken in v8. I use v8.5.1 in Lion; works fine for me -- I don't do any SWF exporting.
    I have a few other things on my MBP, recently upgraded to Lion; I upgraded just about every app to the latest versions with exception of Quark. The only  other PPC things besied that XTension are some scripts from Adobe Illustrator CS5.1, which got installed with CS 5.5. I guess Adobe forgot to upgrade those. No biggie, I never use them.

  • Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?

    My screen sharing functionality did not show up in the dock with an updated icon.  It had a question mark- shows my connections but nothing works, I did make sure screen sharing is on and also connected to VPN.  Once I tried to launch screen sharing nothing happens.  Such an elegant solution in Mavericks not does not work. Ugh. Help!

    This is the post that got me set up- I too am running an older version at work vs. Yosemite. As soon as I followed is advice everything worked.
    Upgraded to Yosemite and can no longer remote into my work iMac through screen sharing- it is turned on in settings?
    I believe the location of the "Screen Sharing" app has changed, which explains why if you had it in the dock it has been replaced by a ?
    Don't forget you can launch screen sharing (once your VPN connection is up) by typing in the Safari destination slot vnc://remotemachinename:portnumber  (omit the :port number if you are using the default VNC port, 5900).  This should launch Screen Sharing and put its icon in the dock.  You can drag the Screen Sharing icon to the left of your dock and it will hopefully remain there after you exit Screen Sharing, or you can right-click on the icon when it's running and select Options->Show in Finder to find out its new location and drag its icon to the permanent entries in your dock.
    Hope this helps; worked for me.

  • Since upgrading to Yosemite on my Mac airbook I can no longer sync my outlook 2011 calendar onto my iPhone through iTunes, what's happening apple, I am not happy!!??i

    Since upgrading to Yosemite on my Mac airbook I can no longer sync my outlook 2011 calendar on my iPhone through iTunes??!!

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

Maybe you are looking for

  • Airport connection drops when using external monitor

    I just bought a new monitor to use as a 2nd display for my Macbook. Problem is, as soon as I plug it in, my wireless connection just kills over and dies a horrible death, but as soon as I unplug my MiniDisplay to DVI adapter, it works great. I've bee

  • Transfer of requirements

    dear gurus,                can any body explain the transfer of requirements from salesorder to production..ie integration of sd and pp. in sales orders what are all the pp parameters ?                   -guna

  • JDBC Sender OS Command

    Hi All,           I want to know where the operating system command runs when used  in jdbc sender adapter , In PI or in the database after executing the sql queries? I am wondering if i can use a Stored procedure through a script in database. Any he

  • Why can't I update my iPad 1 beyond 5.1.1

    Why can't I update my iPad 1 beyond IOS 5.1.1??

  • Installing Agfa Duoscan T1200 scanner with latest OS X (10.4.8)

    Does anyone know if it is possible to install my Agfa Duoscan T1200 scanner in my G4 without causing much trouble? My G4 has a Ultra SCSI card installed. When I check the contents of my PCI Cards it says that I have ADPT,2930CU installed. I am assumi