I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then the AV cable - no sound. AV first, then earphone - sound. Anyone know why?
I use Keynote on iPad2. Video out via composite AV cable, audio out through earphone socket. If I plug into the earphone socket first, then plug in the AV cable - no sound. AV first, then earphone - sound. Anyone know why?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
Similar Messages
-
Hi My battery on my macbook pro keeps running low on power very quickly and I have to keep recharging it. This has never happened before. I have used all the power saver options, but it keeps happening. Can anyone help. The battery seems to be losing power even when it is turned off.
Hi BigThinker,
How old is your Mac? If it is an older one, then the battery may just be dying. You can check by clicking on the Apple in the upper left-hand corner, then clicking on About This Mac>More Info>System Report, then click on Power (about half way down the list). At the top of the resulting display, you should see the following type of info:
The Health Information will tell you if your battery is going to need replacement soon. If it says Normal, then it is not the battery.
Cheers,
GB -
I've used this same iTunes account multiple times to back up phones and restore them when I've gotten new devices. I have restored this device as well once before, but i want it as up to date as possible becuase I am getting the iPhone 6 tomorrow. I've run a diagnostics test and under the connectivity test its saying there is no iPhone found, as well as under the sync test. I've gone through all the steps and what the possible problem could be (un-installing and re-installing, making sure all the software is active and up to date on my computer and making sure everything is installed correctly and running properly) and I'm still getting the same error message. I'm out of options and idea. Please help!
Hey avitz99,
Thanks for the question. After reviewing your post, it sounds like the iPhone is not recognized in iTunes. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Device not recognized in iTunes for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My iphone goes into voice control without me asking. This happens when I'm listening to music. I do turn off my phone and turn it back on but eventually it happens again. What is causing the problem?
Yes, your iPhone has the classic signs of early onset Alzheimer's...
Assuming that nothing is pressing on the Home button when this occurs, try the basic steps as needed:
1. Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
2. Restore phone in iTunes using a backup
3. Restore in iTunes as new, without using a backup.
If #3 doesn't help, there is a hardware problem such as a defective home button, and you should make an appt. with an Apple Store Genius bar. -
can anyone help me . my ipod touch keeps freezing and i have to hold the home and sleep button to get it started., i restored it and also updated it . Any answers . Thanks
If you still have the problem after restoring to factory defaults/new iPod you likely have a hardware and an appointment a the Genius Bar of an Apple store is in order.
-
Does anyone know why iOS 7 still doesn't have group messaging?
Yes, I know I can send a group message by entering the contacts one at a time. But it should be possible to just enter the name of a contact group and have it automatically send a text to everyone in that group. Every other mobile OS has this feature. Even my daughter's dumbphone does this. And when I look online for workarounds, I see LOTS of grumbling about the fact that this incredibly basic feature STILL isn't included in iOS7. Does anyone know WHY? It totally mystifies me why something so basic isn't an option.
I left feedback on it about three or four times since I got my iPhone.
Apple do not respond to feedback and since they have not added the facility ,you have your answer
and you got my response because as Ralph posted ...................
The terms of use of this forum do not permit speculation on the decisions that Apple makes -
I downloaded Looper and the sound is completely out? the movie is about 10 seconds a head of the sound? Anyone know why?
Hi jackim2009,
If you are having issues with the audio during video playback in iTunes, you may find the following articles helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Apple Support: iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696
Regards,
- Brenden -
Does anyone know why I can only get sound and no video with a compatible component cable?
Does anyone know why I can only get sound and no video with a compatible component cable?
What apps are you trying? TV out video only works with apps that support TV out. If the app does not support TV out you will still get aoudio via the component cable
-
When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?
I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do. -
I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn
I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.
-
I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.
I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors. -
My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
-
When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?
TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary. -
does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?
Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device -
When I publish a movie using Captivate 6 I sometimes get a slide that is overlayed with part of a previous slide. Does anyone know why this might be happening and what I can do to prevent it?
Which version of 6? Check the slide quality, if it is at Low, push it to High or Optimized. Then uncheck all compression settings in Preferences, Project, SWF Size and Quality.
Maybe you are looking for
-
How do I add a phone number so I can use either my US or Canadian number (depending on where I am) with iMessage and Facetime on both my iPhones?
-
How can I get iPhoto backup to open as main library?
This is probably my first mistake- I only copy and pasted my iPhoto icon to my external drive- and it opened and I saw all my photo's and streams. So being a newbie I figured it worked. I reinstalled OS X Mavericks because I wanted to start fresh. No
-
Firefox is taking along time to get started after opening home page
after opening firefox it takes a few minutes before I can browse any site or feature. Everything is frozen on the home page for awhile.
-
Resize animation in cs5 64 bit bug?
Hello, I'm trying to resize an animation I have larger, it has 12 layers, and 20 frames or so on each layer. I'm using edit multiple frames and selecting them all, and it is working to resize them, but randomly it will delete one of my objects for a
-
A diagonal line across every cover in the cover flow view
I have a black diagonal line across every cover when use the cover flow view. Even in the iTunes store, in the tv shows or music videos, in cover flow view, I still see a black diagonal line across the cover. I reinstalled iTunes 7.0.2 a few times, b