I use Place Multiple Fields when creating fillable forms. Is there a way calculations can be updated?

I would love to not have to go into every calculating field to re-set each calculation to the updated field names (there are 250 calculating fields). Any tips?

Thank you, GKaiseril! The field names are in sequence but I already know my javascript skills are not up to this challenge. Perhaps I should explain what I'm trying to accomplish and include some field names in the javascript forum?

Similar Messages

I use Place Multiple Fields when creating fillable forms.

Is there a way calculations can be updated? I would love to not have to go into every calculating field to re-set each calculation to the updated field names (there are 250 calculating fields). Any tips?

(This is more of a question for the Acrobat Forms or Acrobat JavaScript forum...)
It's possible, but you need to use a custom calculation script that takes the target field name and extrapolates the names of the other fields from it, and then uses their values in the calculation.

I have redeemed my iTunes giftcard (which was accepted without verification) however when I tried to make a purchase, I am required to verify my identity, and thus I cannot use the giftcard which I HAVE REDEEMED. Is there any way I can un-redeem it?

I have redeemed my iTunes giftcard (which was accepted without verification; it only needed my password)
However when I tried to make a purchase, I am required to verify my identity, and thus I cannot use the giftcard which I HAVE REDEEMED. Is there any way I can un-redeem it? I am currently trying to enter all of the possibilities for my questions, and my iPad is new, so the serial number is not registered with my account. According to support, no purchases have been made in my account, so I can't verify my identity through credit card. Please help!~

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
If you just want to have the card un-redeemed, use the form.
(123638)

Is there a way to reduce the size between the lines in when creating a form in FormsCentral so that you can fit more lines on a page?

Is there a way to reduce the size between the lines in when creating a form in FormsCentral so that you can fit more lines on a page?

In the Folders Tab, right click on folder then click Reveal in Explorer. This will open an Explorer window with the folder selected. In Explorer you can right click > Properties or navigate to whatever you want to measure.

Multiple choices when creating a form

Hi all! I thought I had this figured out, but it's I can't get it to work. I'm using Acrobat 9 Pro. I'm creating a form. I have questions that require an "either/or" answer AND I've got "choose all that apply" questions. I've got the either/or boxes working. But I've tried both the radio buttons and the check boxes for the all-that-apply questions, and it still is only allowing one answer. What am I doing wrong? From what I can tell, I should use Radio buttons for the either/or questions and check the Check Box tool for the choose all that apply questions. But it is still forcing only one answer! Thanks!
Julie

Unlike radio buttons, you'll want your check boxes to have different output values and different names. It sounds like you haven't given each check box a different name.

When clearing a form, is there a way to also clear the photos?

I have an existing form created using Adobe Pro's form creation. This contains a label tool for adding photos. When I clear the form, the photos remain. Is there a way to clear out the photos of a form after one has already been linked?
Thanks,

OK I understand what you are saying, but I am not as Java Savy as I would like to be.
I have created the hidden blank icon. Based on another users similar question, I used the following script that you provided for him for the buttonGetIcon Field Method.
var oIconClear = getField("buttonClear").buttonGetIcon({nFace: 0});
getField("Picture 1a").buttonSetIcon({oIcon: oIconClear, nFace: 0});
I believe I still need the buttonSetIcon field method because this script alone did not seem to work.
Perhaps I am doing everything completely wrong

Is there any way I can just update the apps on my iPhone using iTunes on my PC?, Is there any way I can just update the apps on my iPhone using iTunes on my PC?

I have more than a 100 apps which I do not use but are there in my iTunes library! My iPhone has only a few (40) updates. As I am not allowed to use office wi-fi to download or update my phone apps, I want to use iTunes on my PC for the same. But I do not want to waste time searching for the apps on my phone and then update it using iTunes. Also, I do not want to update all the apps in my iTunes Library as there are more gthan 100. Can anyone suggest me a method where I can just update the apps that are on my phone using iTunes??
I have the latest iTunes installed.

Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a different setup you transfer the old library from a computer or a backup directly to the new setup, not the device to the library. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

When creating a trailer, is there a way to use the stock images/footage in the sample trailer?

After editing the copy for my trailer (Surf Kid), the music remains but the footage is replaced with the placeholders.

No.

How to add multiple table when creating add on using b1de

Hi all,
Plz help me
How to add multiple table when creating add on using b1de.
Thanks

Hi dns_sap,
Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
If so, you can use the following code
Add User Table
        Try
            Dim lRetCode As Long
            Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
            oUDT.TableName = TableName
            oUDT.TableDescription = TableDescription
            oUDT.TableType = TableType
            lRetCode = oUDT.Add
            '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
            If lRetCode <> 0 Then
                oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
            End If
        Catch ex As Exception
            oApplication.MessageBox(oCompany.GetLastErrorDescription)
        Finally
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
            oUDT = Nothing
            lRetCode = Nothing
            GC.Collect()
        End Try
Add User Field
Try
            Dim lRetCode As Long
            Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            oUDF.TableName = TableName
            oUDF.Name = FieldName
            oUDF.Description = FieldDescription
            oUDF.Type = FieldType
            lRetCode = oUDF.Add
            '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
            If lRetCode <> 0 Then
                oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
            End If
        Catch ex As Exception
            oApplication.MessageBox(oCompany.GetLastErrorDescription)
        Finally
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
            oUDF = Nothing
            lRetCode = Nothing
            GC.Collect()
        End Try
Regards,
Vítor Vieira

Need Check Box Help using Acrobat Multiple Fields

I am trying to get the check marks on this form to act as individual units that can be tabbed through (going down left column, then to right column). I used the "Place Multiple Fields" command to get all the check boxes in. Now, when I do my preview test run, if one box is checked more than one gets checked off someplace else in the form. I want them each work as their own unit and not be associated wiht the other boxes. Do I have to draw each one of these in individually to get this to work the way I want it to work? I am guessing that can't be true. This is a computer after all.I am betting it is an adjustment I need to make to the "Place Mulitple Field" command when I put them in???? I know this one will be a simple answer witha simple soultion. I'm tap dancing all around it and just can't get it. The visual shoudl expalin it all. Thank you.
I check on one box in the left column and it also checks other boxes in the right column or elsewhere.

You need to give each separate check box a unique name. If check boxes have the same name and export value, they will behave that way. If several check boxes have the same name but unique export values, they will behave as a group, where only one in the group can be selected, very similar to how a radio button group normally would behave.

I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
Always visit the scanner vendor's site and download - install the latest greatest software.
n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
As well the Acrobat 9.x product family is not compatible with contemporary OSs.
Be well...

I used the wrong year when creating an account, now it tells me im to young no matter what year i use?

I used the wrong year when creating an account, now it tells me im to young no matter what year i use?

Have you tried just exiting the setup and try trying later?

Which BW variable is used for date(range) when creating a portal service

Hi,
Can any one please let me know which BW variable is to be used for date(range) when creating a portal service for searching based on dates.
Thanks
Abhai

Hi Arun,
its just a portal service which would be called when searching a document created on a particular date or betwwen a range of date.so what i require is which BW variable to be used when handling range.As for variable technical name we use VAR_NAME_I and for single value variable we VAR_VALUE_EXT_I
in the similar manner i want BW variable to be used for range of values.
Thanks
Abhai

Default value in field when creating a new vendor (Transaction: XK01)

Hi, everybody!
Is it possible to set a default value to a field when creating a new vendor (transaction: XK01)?
We need the field "Payment terms" in "Payment transactions accounting" tab and field "Terms of payment" in "Purchasing data" tab to be filled with a default value when creating a new vendor.
Thanks in advance
Best regards,
J Madariaga

You can try creating a transaction varient fron SHD0 for this which will default the requiredd values .
-Hari.

Trying to create fillable form from InDesign table

I am working on a very long document, over 100 rows and about 18 columns, which will exist only as a pdf. I need to make 6 of the columns interactive so that they can be filled in with one of three letters by the end user.
I created the design in InDesign CS 5.5 as a table. That worked well for design control, but Acrobat X 10.1.3 does not recognize any of the cells in the PDF document. Is there a different InD export option that will make a table convert to a fillable form? I used press quality, then opened the pdf in Acrobat.
I have worked around by creating a short drop down list with the three letters in it and copied that into the cells using the Place Multiple Fields command. Then I can adjust position easily enough.
*Except* my client would prefer that the end user just type one of the letters into the cell/field rather than doing a drop down selection on each of the several hundred cells. She'd also like to be able to copy and paste the final filled-in information into her original excel document.
Am I missing something in Acrobat? I don't do fillable forms often and have never had one this massive.
I am working on a Mac.
Thanks for any help.
DC

Hi Dory, any luck on your post regarding the fillable forms in Indesign?
all best
Riaan Liebenberg
Dory Colbert wrote:
I am working on a very long document, over 100 rows and about 18 columns, which will exist only as a pdf. I need to make 6 of the columns interactive so that they can be filled in with one of three letters by the end user.
I created the design in InDesign CS 5.5 as a table. That worked well for design control, but Acrobat X 10.1.3 does not recognize any of the cells in the PDF document. Is there a different InD export option that will make a table convert to a fillable form? I used press quality, then opened the pdf in Acrobat.
I have worked around by creating a short drop down list with the three letters in it and copied that into the cells using the Place Multiple Fields command. Then I can adjust position easily enough.
*Except* my client would prefer that the end user just type one of the letters into the cell/field rather than doing a drop down selection on each of the several hundred cells. She'd also like to be able to copy and paste the final filled-in information into her original excel document.
Am I missing something in Acrobat? I don't do fillable forms often and have never had one this massive.
I am working on a Mac.
Thanks for any help.
DC

I use Place Multiple Fields when creating fillable forms. Is there a way calculations can be updated?

Similar Messages

Maybe you are looking for