I've formatted my win7 pc, sync problem

I've formatted my win7 pc from 32 bit to 64 bit and i just backed up an .xml library file from itunes. How can i sync my ipod without erasing any paid apps ? it's not a new computer just formatted, i'm not gonna use any other computer. I've imported library.xml but it just includes songs, Also for now ipod can be seen on my computer but not in itunes.

Since you re-formate you computer your iPod will see it as a new computer.
First get iTunes to see your computer:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
After that you can move iTunes purchases, including your apps. to the "new" compouter by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
Also, you can always redownload apps at no additional cost:
How to redownload purchased apps from the App Store
If necessary you can transfer non-iTunes music to your computer by using one of the third-part programs discussed in in this previous discussion.
Best iPod to PC
Make sure that the .xml folder/file is actually music and not just a listing of music Ican y place the songe in iTunes on the computer).
After you get everything in your iTunes library, restore the iPod to factory defaults/new iPod and sync your stuff to the iPod. You will lose your app date since you do not have a iPod backup file t restore from.

Similar Messages

Itunes / Win7 RC Sync problem - yet to find answer/work-around...

Quick synopsis - itunes won't let me re-sync after the initial ipod connection sync as it's already ejected the device (or Win7 has).
I've got Win7 RC, tried itunes 8.1 & latest 8.2, I've uninstalled completely using the advice on this forum & re-installed. I've made sure itunes is authorised on my PC, the itunes install itself was fine (no errors etc).I've tried disc mode, tried different USB ports, tried 'don't auto sync' on the devices tab, tried mucking around with the apple mobile sync bit in Win services too!
Problem : when I attach either my 4th gen Ipod or my video Nano, itunes recognises the device (as does Win7) & sync's immediately. No problems so far. Unfortunately (for me anyway!) as my nano & ipod are both full, it comes up with the dialogue box asking if I want to stop syncing podcasts etc. Trouble is, either of the ipods have already disconnected so even if I click OK, it's too late & itunes comes up with device not found (or some such message) as it's already been ejected.
If I unplug (or hard reset) & replug back in, itunes just starts as normal & tells me that I've not got enough room on the device!
A bit of a catch 22 situation.
It makes no difference if the ipod(s) are in disc mode, if I restart/stop/change the apple mobile device bit in Win services.
I did try to restore both the ipods (which eventually worked) but if course it will not let me re-sync after having sync'd once.
I'm running out of ideas - can anyone help?
Nic

From http://www.apple.com/itunes/download :
_Windows Hardware_
A PC with a 1GHz Intel or AMD processor
Screen resolution of 1024x768 or greater
Playing videos purchased on the iTunes Store requires an Intel Pentium D or faster processor
Playing HD-quality videos purchased on the iTunes Store requires a 2.0GHz Intel Core 2 Duo or faster processor
512MB of RAM; 1GB is required to play HD-quality videos
A DirectX 9.0-compatible video card with 32MB of video RAM; 64MB recommended
A QuickTime-compatible audio card
A broadband Internet connection to use the iTunes Store
An iTunes-compatible CD or DVD recorder to create audio CDs, MP3 CDs, or back-up CDs or DVDs
_Windows Software_
*Windows XP Service Pack 2 or later, or 32-bit editions of Windows Vista*
*64-bit editions of Windows Vista or later require the iTunes 8 64-bit installer*
QuickTime 7.5.5 or later is required (included)
200MB of available disk space
Screen reader support requires Window-Eyes 7.0 or later; for information about accessibility in iTunes,

Premiere CS4 - Audio sync problems, Encoding Problems

Hi,
I've been using Premiere CS3 for encoding 20-25 minute videos to deploy on a Flash Media Streaming server.
Today I upgraded to CS4 and everything that I render to FLV/FV4, H264 or Quicktime format has serious audio sync problems when I use AAC as the audio codec. Unfortunately for me, AAC is the codec that I need to use for the streaming server. The audio is synchronized to begin with, but it gets progressively unsynched as the video progresses.
Has anyone else had this problem? I'm using bitrates of 256 kbps, 512kbps for the video and 24 kbps / 32 kbps for the audio.
Another thing that I've noticed is that many of the options that I used when encoding videos are no longer available!! For instance, I cannot generate hinting tracks for Quicktime, and most of the audio frequencies are gone for Quicktime as well.
What a disappointment:(
-Chris

Seems to be an on going issue with no response from Adobe. Have the same issue with the audio running ahead of the video. (Cool if this was an old Japanese monster video).
Running CS4 PP & AME all updates are current. Nvida Quardro CX (current drivers 4.20.006) used several formats (Elemental h.264 to MPEG-2) same issue.
PC Intel Xeon CPU 3.20GHz 16GB RAM – Prof Win XP x64 Ser Pack 2
Any help from Adobe would be appreciated.

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

AV sync problems when rendering Quicktime in PE 8

I have a simple problem when rendering to Quicktime format fromPremere Elements 8: The AV sync goes out of whack.
I have tried rendering:
(a). To MPEG - output is fine.
(b). To WMV - output is fine.
(c). MOV - av sync errors
I am assembling about five clips. The first clip plays fine. The AV sync problems starts at the second clip - the audio is a good 3 seconds or so ahead of the video.
Everything is fine in the editing window.
I am running in Windows 7. To make sure it is not the player, I have played the quicktime output in Windows Media and itunes and the same problem is in both.
Has anyone seen this issue?
Thanks.

Hi Steve,
Sorry for the confusion. It a sensible suggestion to identify the input formats and output formats and I would most appreciate your inputs to this issue because I admit that I am really struggling here to get a workflow going.
Input formats:
1. MJPEG 1280x720P at 24 frames per second (from a Panasonic Lumix Camera)
2. WMV 1280x720P at 24 frames per second from output of other programs (which only support wmv output at High def output)
3. MPEG2 1280x720P at 24 frames per second (and sometimes 25 frames per second) from other sources
Target output formats are:
1. Blu-Ray
2. MP4 container format @ 1280x720P for playing on my Apple TV
3. DVD (ordinary plain PAL DVD at 720x576P at 25 frames per second)
My goal is have Pre Elements 8 Project settings in High Def and then to simply target all three outputs from one project so that I do not have to redo all of the projects with different project settings.
Workflow is in two stages:
Step 1 is to create one project for each Chapter and save to disk: The inputs are from all three input formats that I identified above (High Def - MJPEG, WMV, and MPEG2). I would like to edit, mix the audio, and then save each chapter to disk. The format in which I save this is preferably some kind of high def format that can be edited easily at a later time.
Step 2 is to create the Project that is used to assemble each chapter for final output: This is the project where I put in Chapter marks, create menus, etc. The target outputs from this chapter are Blu Ray (high def), AppleTV (high def), and PAL DVD (Standard def).
In all cases, I set up my Project Settings as HDV-AVI for internal rendering because all inputs are high def and most target outputs are high def.
Issues that I am dealing with:
1. I cannot figure out the best export format to go from Step 1 to Step 2. HDV-AVI doesn't seem to be available as an export format. Basically, I am looking for an export format that puts the least strain on resources when they are read in for Step 2 and retains the highest quality.
2. Most of my inputs are 24 frames per second but the internal rendering for Pre Elements 8 seems to be 25 frames per second. Frame rate conversion can be quite tricky and can put significant strain on resources, but it is not clear if this is straining Pre Elements 8 or not. It does seem to be. I am happy to convert my files into a format that puts the least strain on Pre Elements 8 internal rendering and yet produces the best output.
Note: If you ask - why do I do this in two steps? It is because I am always putting a strain on system resources when operating in high def. Unless I am careful, I get a message that Pre Element is "low on resources" followed by a crash shortly thereafter. I have Win7 32 bit, 4 GB RAM, no other programs running, all drivers updated with the most recent version (yes - even the NVIDIA driver) so there really isn't anything else that I can do in this area.
So I am looking for suggestions in the following areas:
1. An alternative workflow that produces the three high def outputs with the three high def inputs defined above that doesn't cause Pre Elements to continually go low on resources and crash.
OR
2. A recommendation for a high def format that puts minimal strain on Pre Element resources?
Thanks!

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

2014 Sync problems on iPod classic / Please help!! 2014

Hello community!
I really need some help with this problem I am having... I have done some research for the past few days on my own but nothing I have found has helped.
First some specs on my device...
iPod Classic: 80 GB (I believe this is iPod with video, assumed on the fact that it supports movie syncs)
iPod software version: 1.1.2 (up to date according to iTunes)
Formatted for Windows
Syncing to Dell Inspiron with Windows 7
iTunes updated to current version (11.4)
I had much mof my music library uploaded onto my iPod for quite sometime. (close to 14,000 songs synced at 192 kbps) I often like to put my iPod on shuffle and just listen to whatever comes on, but here and there I will skip songs until something I am in the mood for comes on... I began to notice that my iPod was freezing (ON THE DISPLAY ONLY!!! Playback through speakers continued) when I would skip through songs... Once the screen dimmed however, I could once again skip to the next song. I figured this was a problem concerning corrupted files or something similar. These are the steps I took..
1.) Updated iTunes to version 11.4 and checked for further updates
2.) ATTEMPTED to check disk within Windows (was unsuccessful and heard the iPod making a lot of 'clicking' noises from within the casing)
3.) Performed an iPod restore within iTunes
4.) Performed a check disk within Windows and recovered any bad sectors (SUCCESSFUL)
5.) Selected 'Music' sync and the option for 'Entire music library'
6.) UNCHECKED 'Include music videos'
7.) Reconfigured settings as they were before and made slight changes..
     a.) Checked 'Open iTunes when this iPod is connected'
     b.) Checked 'Sync only checked songs and videos'
     c.) Checked 'Convert higher bit rate songs to '192 kbps' AAC'
     d.) Unchecked 'Manually manage music and videos'
     e.) Unchecked 'Enable disk use'
8.) Began a sync on my iPod... With well over 10,000 songs I knew this was going to be a lengthy process.. I left computer unattended..
When I returned to my computer, iTunes was unresponsive... The only way I could get iTunes to show was to minimize a Window on top of iTunes. iTunes states 'Syncing iPod... Do not disconnect' but does not show a rolling progress bar.. I cannot cancel sync, I cannot eject iPod, I cannot close iTunes...
I attempt to eject iPod device through windows, UNSUCCESSFUL (Cannot unmount generic volume while the device is in use)
I 'Ctrl+Alt+Dlt' to Task Manager and End Program 'iTunes' UNSUCCESSFUL..
I End Process 'iTunes.exe *32' and eject iPod through Windows SUCCESSFUL
When the iPod displayed 'OK to disconnect with load bar, I disconnected the device.
As soon as this bar was full iPod IMMEDIATELY rebooted completely and powered back up with only 20 songs synced. (Frustration ensues)
Confused and thinking maybe my screen saver caused an interruption during the sync, I changed screen saver and power saving options to eliminate any possible interruption, REPEATED STEPS 3-8 ABOVE, and started sync again.. Left computer unattended
Again, coming back to computer much later, iTunes was in the same unresponsive state. Closed iTunes and began looking for answers on the internet. Any and all answers I found stated I should restore iPod, update iTunes, run diagnostics tests, etc., etc...
All of which I had done EXCEPT for running a diagnostics test..
Running a diagnostics test: I ran only the tests concerned with 'Device Connectivity' and 'Device sync' tests.. Here are the very interesting results I yielded from these tests...
Device Connectivity Test:
Support services:
     'iPod support service is running.' Status: GREEN
     'iTunes Helper is running.' Status: GREEN
     'Apple Mobile Device is running.' Status: GREEN
Ports:
     'USB ports verified.' Status: GREEN
     'No FireWire (IEEE 1394) ports found.' Status: GREEN
     'iPod found.' Status GREEN
ALL TESTS PASSED
Device Sync Tests
Results:
     No iPod touch, iPhone, or iPad found. Status: RED
ONE OR MORE TESTS FAILED
I am at a loss, I realize that Apple has discontinued the iPod Classic but does that mean iTunes will no longer support these devices!?
And if ANYONE has ANY suggestions for possible steps I can take to regain syncing privileges to my iPod once again, please let me know!
Also, I have diagnostics test results saved on my desktop and available to post if required!
Thank you for any and all help!
-Chris

!UPDATE!
I made several adjustments to my sync options and made some progress and am now trying to sync in 'stages' as I like to think of them.
Here is what I did:
1.) Under 'Music' tab in 'My iPod' options I opted to sync 'Selected playlists, artists, albums, and genres'
2.) Selected a small portion of tunes I know I want on my iPod (ended up being close to 3,500 songs.
3.) Under 'Summary' tab I unchecked the 'Sync only checked songs and videos' box
4.) Unchecked 'Convert higher bit rate songs to ___ AAC'
5.) Checked 'Enable disk use'
6.) Ran a SUCCESSFUL sync!
I am now running a sync keeping the same adjustments in place and have added 6,556 songs. (SYNC IN PROGRESS)
I am wondering if trying to convert that many songs to a lower bit rate is causing sync problems and it appears as if I am at least making progress on this. HOWEVER, I really prefer to decrease the bit rate on my songs so I may fit more on my iPod... Usually most of the files I have in iTunes are at 320 kbps with a select few at 192 kbps. I would like to make everything the way it was before my first iPod restore.. 192 kbps, but this also seems to be the cause of the sync problems I am having? Anyone else have a comment on this?
Thanks again
-Chris

Syncing Problems - Worried about losing all my data

Wife and I each have an iphone 3GS running latest version of iTunes in 10.5.8. Never had syncing problems previously. We haven't synced for a month. Tonight, I plug my wife's in and it asks to update software. I proceed and then after it tries, it says there was a problem updating software. I don't have time to problem shoot, so I sync hers and then plug mine in.
When I plug mine in, instead of recognizing my phone and all its content, it says an iphone has previously been synced with this computer and asks if I want to restore from back up or format (not the word they use, but can't remember) it as a new iphone. So, if I format it, I lose all my info and if I restore from a back up, I lose all the calendar entries I've made and applications I've purchased since the last sync which was a month ago.
Why is it not recognizing my phone as current? What can I do?
I tried resetting the phone. I don't want to do anything else that's going to make me lose all my updates from the past month. Please help!
Thanks!

If there is any data left on the phone you didn't back up on your mac, try to do a manual backup. Disable autosync in itunes, connect your phone, right click on it in the device list and choose "Backup"
See what the backup contains here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way.
If your phone is not recognized, try to connect in recovery mode: http://support.apple.com/kb/HT1808

How to read 16-bit signed integer in binary format with 2 byte sync. preceding??

A flowmeter provides data as 16-bit signed integer in binary format with 2 byte sync. preceding
I got i small problem by understanding the synchronasation.
I read the data provided by the flowmeter, and then write it to a binaryfile.dat. i need to convert the data to decimal format. is it better to convert the data before or after writing it to the binary file. Coz i need to read the data out again for calculations and save it again in a new file.
I understand that the synchronization help one to see where to begin reading the usable data. is it right?
Need any suggestions
Thank you !
Zamzam
HFZ
Attachments:
DataOut.JPG ‏37 KB

HI Rolf.k.
Thank you for the small program it was helpfull.
You got right about that proberly there will be conflict with some spurios data, I can already detect that when writing the data to a spreadsheet file.
I writes the data in such a way, that in each line there will be a date, a timestamp, a tab and a timestamp at the end. That means two columns.
When i set given samplerate up, that controls the rate of the data outflow from the device, (1,56 Hz - 200 Hz), the data file that i write to , looks unorderet.
i get more than one timestamp and severel datavalues in every line and so on down the spreadsheet file.
Now the question is: Could it be that the function that writes the data to the file, can't handle the speed of the dataflow in such a way that the time stamp cant follow with the data flowspeed. so i'm trying to set the timestamp to be with fractions of the seconds by adding the unit (<digit>) in the timestamp icon but its not working. Meaby when i take the fractions off a second within the timestamp i can get every timestamp with its right data value. Am i in deeb water or what do You mean!??
AAttached Pics part of program and a logfile over data written to file
regards
Zamzam
HFZ
Attachments:
DataFlowWR.JPG ‏159 KB
Datalogfile.JPG ‏386 KB

Sync problem converting videos with SU

Hi there. I have owned my Creative Zen Vision:m 30gig player for about 2 weeks now. So far I have really come to love this device. I have learned how to put album art on all my favourite albums with ?Album Art Downloader? and I am using Media Monkey to manage and sync my mp3 files from my pc to my Vision:m. I have even loaded all my photos onto the player and bought the accessories pack so that I can hook it up to my television ? it works perfectly.
My last challenge (so far) was to figure out how to make this video thing work as I have about 00 videos which I have downloaded from Google video via a plugin for Mozilla Firefox called ?Video Downloader ?. The videos from Google video are encoded into something called a .flv file. I have done A LOT of reading here and other places on how to convert the various formats into formats the player can understand. Apparently the program ?Super? is THE thing for converting almost anything into well anything. I tried it and found out I could select ALL of my videos and select a common setting for them all to be encoded into. My first reaction?. sweeeeeet! The videos did not seem to have lost much quality and when I loaded them to the player, it would play them nicely? or so I thought.
It did however slowly but inevitably become clear to me that despite my most fierce attempts of denial? there was a sync problem with the audio. Not a huge annoyance but still an annoyance, something which I knew I couldn?t li've with. I therefore rushed to the program and tried to shuffle the settings a bit, changed the codecs changed the containers but nothing would work. The sound sync problem would still be there, lurking. The problem was also present when converting high quality xvid movies.
This is where my creativity and patience has come to an end. This is where I give up and crawl to you begging for help. I in order for you to help me, I will try to help YOU recreate my scenario.
I have a video, perhaps a little morbid, where the sync problem is very obvious after you have converted it with super, here is the link http://video.google.com/videoplay?docid=-7233445036972827652
I use a plugin for Firefox to download videos from Youtube, Google video, etc. called ?Video Downloader?, here?s the link
https://addons.mozilla.org/firefox/2390/
The settings I use for Super are the following:
Output Container: Avi (For Pocket Pc)
Output Video Codec: Mpeg4
Video Scale Size: 320*240
Frame/Sec: 25
Bitrate: 336
Hi Quality: ?Checked?
Stretch It: ?Checked?
Sampling Freq: 22050
Bitrate kbps: 28
Ok if you manage to download the clip from google video (easy) AND convert with Super into a format fitting for the Zen Vision:m without the sync problem? well my joy will break any ?happy-meter? out there
Ps. I did actually find a way to fix the sync problem, I checked the ?Directshow? for the ffmpeg but the picture was sort of lagging and looking REALLY ugly so that actually created a problem much worse than the previous one.
Thank you for your time and patience

I am not sure I can help you but I do have one pice of information. The sync problems arise from converting to the wrong frame rate. If you can choose the frame rate for the videos you convert to then you can test different rates and find the right rate. Keep in mind that there is currently no way to determine the approiate frome rate without teting it.
[Edit]
BTW is that MS-mpeg4-v or MS-mpeg4-v2?Message Edited by Edward-Nardella on 2-26-200602:08 PM

Video Sync Problems in iTunes 11.1/ios 7

I have recently upgraded to ios 7 for my iPad and iPhone, and iTunes 11.1. I added two new videos to iTunes (.m4v format) and now when I try to sync with my iPad it seems to hang forever on "Waiting for changes to be applied" and then gives me an error message that the videos are not of a format that can be played on the iPad. This is odd since I already have .m4v videos on my iPad that play just fine. Moreover, I deselected some videos and they do not delete from my iPad as well. Is anyone else encountering this? I have seen some posting regarding music files and playlists not syncing, but nothing about movie files.

I've had video syncing problems (not with music though) when I updated my iPhone 4s to the new IOS 7, but I finally figured it out. What I did was I plugged my 4s in to my computer (Windows 7, 64-bit), then opened iTune (11.1.3.8), clicked on my iPhone tab on the upper right, under "Summary" put a 'check' in the Manually sync music & videos.
Looking at the picture above, notice the: Movies, Music Videos, and Home Videos; are now available. Before this method, these three wasn't there. These are all in the original Videos app for the iPhone. I hope this help you guys too.

I am having "downloading safari safe browsing data" syncing problem !

I am having "downloading safari safe browsing data" syncing problem ! My videos and music erased off from my new generation Ipad with IOS7 and I can restore them back from my itunes? I am using Win7. How can I get rid of this problem ?

Hi ...
This is the Safari for OS X community.
Best to post your topic in the iTunes for Windows community > iTunes for Windows: iTunes: Apple Support Communities

New Touch Missing Movie Rental/Game "In-App Purchase" Sync Problems.

just picked up the new iPod Touch 4G (64GB) and am syncing to Win7 Starter (32bit).
I rented a few movies before I bought the Touch. They all seemed to download fine. the "Move" sync process seemed like it worked perfectly. When I looked back at my movies on my touch, some of them were missing. When I double checked my rental section in iTunes the movies were missing. I remember a dialogue later, saying that the file couldn't be found. I ran a quick windows search with no results.
So it seems like I could "Move" the movie fine, but after the sync finished, the files were gone from both the computer and the touch.
Could someone please explain this, and what I may do to recover those files? I did pay for them after all, and would still like to watch them. I just don't want to pay for them twice.
Also (another similar issue):
I downloaded and played the game "FieldRunners" fine, but then decided to do an "in-app purchase" for the next level. I clicked download/entered my info/ and it seemed to download correctly, but when I re-entered the app, the level was not available to play. just weird.
FYI: this is my first iOS device, so please don't flame me for newbie ignorance.
Any advice/suggestions are welcome!
Thanks.
Overall, Here is my experience with the new touch:
First Connection: Installation did not work. Unplugged / Replugged USB worked correctly. (no restart necessary).
Selecting content to sync: Did not detect Outlook 2010 (FULL/NOT BETA) for Contacts/Calendar/etc.
I chose not to sync this through iTunes, and instead setup an "Exchange" account on my iPod Touch through google (m.google.com). Works perfectly.
I have my other email addresses forwarded through gmail to take care of push notifications. I still don't have Outlook 2010 calendars synced with google yet, but I'll figure that out.
Then I noticed the other sync problems mentioned above.
Again, any help would be appreciated!

Hi Epski
Let us know how you go as i'm having the same issue also. I upgraded to yosemite and itunes 12 at the same time and thought the OS upgrade was the issue. I downgraded back to Mavericks again (for lots of reasons i won't go in to here) thinking this would fix the problem but it didn't.
When i play any video content from itunes 12 in full screen goes dark once the controls fade away. QT, appletv or anything else plays them perfectly, as per itunes 11!
You don't have a Samsung TV by any chance do you?

Audio Sync problem iTunes Festival

Audio Sync problem when watching iTunes Festival on Apple TV3. Other video's work fine. Anyone else experiencing the same? Any solutions?

Hi There,
The same problem is happening with me as well. I keep getting the "analysing audio" message and my clips are 24 or 25 frames out of sync.
I am currently working on a mixed format project - DVCAM and HDV capture into a DVCAM sequence. The DVCAM clips are causing the problem. The HDV clips are fine. I wondered whether it might be a mixed format issue - switching between capture codecs within the same project? Is that something either of you guys are doing? What camera was the footage recorded on. The pictures I'm struggling with were recorded on an Ikegami and I'm capturing from a sony deck.
I have found an easy workaround. Put your entire out of sync clip into the timeline. Correct the sync then drag it back to your bin. You'll get two clips with the same name which is a tad confusing but the one you've dragged back will at least be in sync.
I remember having this problem years ago without explanation. It hasn't then happened for years until now.....
I'd be interested to know if you get to the bottom of it.
Good luck,
Richard

I have set up my new iPad 2 on my windowsn 7 computer, but experienced syncing problems from the start. It seems that it doesn't recognize the iPad, although it appears in iTunes.It only gives set up as new or restore options.

I have set up my new iPad 2 on my computer (Windows 7), but experienced syncing problems from the start. It seems that although my iPad is regognized in iTunes as it appears there, it only gives met the options to set up as a new iPad or restore from the backup, no synching options. What do I do?

File>Devices>Transfer Purchases will transfer the itunes purchases to your ocmputer.
You should sync your ipod to your computer regularly.

I've formatted my win7 pc, sync problem

Similar Messages

Maybe you are looking for