I've looked at a lot of your help articles and sent reports and it is still crashing! Help!!!!!!!
Why does my firefox keep crashing? I've tried about everything and nothing works.
https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
Type '''about:crashes''' in the URL bar and hit Enter. <br />
# Middle-Click the hyperlinks to bring up each Crash Report page in a new Tab; each page may take a few minutes to load.
# '''Then copy'n'paste the URL of each of those reports into the message box here.'''
# We'll see if we can help you figure out what is causing those crashes to happen.
Similar Messages
-
Hello ,
I will like to change my payment information but my new credit card is not American , Is Canadian .How can i change the country on my billing info? I cant seam to be able to do it .
Thanks a lot for your help ,What country are you in ? If you are in the US then you can only use the US iTune store, and you can't use a Canadian credit card with the US store - a credit card needs to have been issued by a bank in the country where you are.
If you are in Canada then remove your old credit card from your account and then update your country/region and billing address on your account e.g. by tapping on your id in Settings > iTunes & App Store on your phone and 'view Apple id' on the popup, or via the Store > View Account menu option on your computer's iTunes -
I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help
Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you. -
Hello everyone,
In the subject, I believe I specify exactly my problem. I am using iPhoto but am a beginner. So lots of new things to learn.
I thus would like to eliminate the post stamps which appear on almost every single page of my photo album.
Can anyone help me?
Many thanks
ClaireHi Terrence, you are quite right - looking further into the file, I notice now that I choose the wrong theme, one which has stamps on every single page. Thanks a lot for your help. I am now able to improve my work on my present iPhoto album. Regards - Claire
-
IP telephony problem in a big shop | Need your help
Hello everybody,
I have an issue to solve regarding an IP telephony problem. My company will send me to France to fix this problem. But most of my knowledge are in routing and switching, I have almost no knowledge in IP telephony ( Theory only). I think the problem is not really difficult but I still need your advices to know where to start and what to do.
Futher down is a summary of the e-mails I received from the shop in France from the employees who are working there. France Telecom is the ISP.
1 e-mail:The problem is the connection between the ISDN lines provided by France Telecom and the IPBX installed by our shop.
2 e-mail:The problem isn't the physical line itself. The problem is that they ( France telecom) do not route all the numbers out to the ISDN line they installed. The number ending with 1212 get routed to the ISDN NT and that number actually works. But the rest of the number series does not get terminated in that ISDN NT. Calling those other number result in an error message being read in French. That can only come from France Telecom.
3 e-mail:We cannot solve this problem because it is not the system which has an error. Carl has been in Bordeaux and has checked the ISND line at that is working, but the number series for Bordeaux is missing in the system from France Telecom, the only existing number is 1212. The rest of the numbers are missing for French Telecom and is therefore not working. Either we have been informed of a wrong number series +33 5 34 32 12 04 to 13 or France Telecom has not delivered what they should.
4 e-mail:I checked again with France Telecom and they confirmed that everything is delivered and ok from their side.
They gave us the number series +33 5 34 32 12 04 to 13 with main number (headnumber) is +33 5 34 32 12 12 (exactly as in Paris where we are n° series from +33 1 53 25 13 70 to +33 1 53 25 13 89 with the headnumber is +33 1 53 25 13 70).
That's the reason why you find only the +33 5 34 32 12 12 arriving into the IPBX, it's because you then have to program in our IPBX the other n° we want to use (+33 5 34 32 12 04/ 05/ 06/ 07/ â¦10/ 13/â¦) within the number series granted by France Telecom.
But this can be done only by us because we installed our own IPBX.
5 e-mail:Even though the other numbers aren't programmed into the IPBX, we should still get some sort of ISDN Layer 1 activity when calling one of the other numbers (fx. the 07number). That never happens, which means the numbers are somehow impeded from France Telecom.
When we call one of the number, we get an error message in French. If the traffic was hitting the IPBX, then that couldn't happen. That speak originates from France Telecom and we have never gotten any explanation as to why it's even there.
I will really apreciate your help. Where do you think the problem comes from? Is that really France Telecom whose empeded the series number(do not route the numbers)? What should I check/do, configure?
Thanks a lot for your help to all of you.
AitasellerAlready replied in "IP Telepho9ny".
Please do not open duplicate threads. -
My computer takes a lot of time to athorize and it did not athorize
I clicked in deathorize all computers then I went again to athorize my computer it takes a lot of time to that and no use still it say connecting to apple store from a hour
You are still under Apple's standard warranty. Call Apple. Take full advantage of your warranty before it runs out (unless you have AppleCare).
-
Can I copy old backups from an external HD to a new one? Thanks for your help.
I'm using time machine on an external hard disc (1 TB) for more than a year now. Now the eHD is nearly full and I would like to change to a bigger one. Is it possible to copy the backups from the old one to the new one? Thanks a lot for your help.
Hello Joe Gramm. Thank you for the link. This is what I was trying to do 2 days ago. I think the problem is, that the old eHD doesn't have the "Ignore ownership on this volume" button, while the new one has it. Therefore I tried to change the rights of access on everything (see above)... Trying to copy now brings me the following message: "Das Backup kann nicht kopiert werden, da beim Backup-Volume kein Eigentümer aktiviert ist." translatet something like: the backup could not be copied, because there is no owner activated on the backup-volume. Do you have any ideas how to change that or how to proceed? Many thanks for any input!
-
There is no option to add an email account in the email setup settings please for your help!!
Hi everybody,
i just became fan of blackberry. i am trying to set up the email i already have in my yahoo account.
I am following the guide and i go to setup email settings. However, there is just the option of "I want to use a work email account with a blackberry enterprise server".
is there any other way to set up my yahoo account in my device?
thanks a lot for your help!!
Regards
DimitrisHi and Welcome to the Forums!
To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you should then have Personal Email added to the email setup wizard.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.
Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround. -
Does not look like the picture on your site. i have xp professional
i downloaded ff v.4, but it does not look like the picture on your website. lots of missing components/tabs?
i use windows xp professional.The orange Firefox menu button is hidden by default on Windows XP.<br />
You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
You can place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top -
I am trying to find an app or software to burn iMovie 11 slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.
I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years... -
Because of my work I look through a lot of interenational - all round the world in fact, anywhere where English is not the native language. I normally use google chrome for these because of the Translate button which is brilliant. I just can't anything like this on Firefox. Am I missing something?
Firefox does not have a built-in feature but you can add something similar with the Google Dictionary and Google Translate extension - https://addons.mozilla.org/firefox/addon/google-dictionary-and-google-t
-
I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.
See if this helps:
Error "License store does not allow writing" | Install log | CS5, CS5.5 -
Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.
Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.
Maybe you are looking for
-
How can I run a labview 7.2 vi in labview 8.2
We have several versions of labview running different test and control functions in our facility. There are labview 7.2 VIs in a production setting I wish to reproduce in the test lab. Can I convert them to run on 8.2 or do I have to recreate them in
-
Is it possible to record vocals in Logic Pro 9?
I just bought Logic Pro 9 to create music, but I was wondering if it's possible to record vocals over the music. If it is possible, how do I do that?
-
Recover music without losing app data, photos, etc.
I am unable to sync music from my computer to my iphone, after deleting the music on the iphone to make space for updating my gps app. Itunes now shows the songs as still on the iphone, but grayed out. How do I get the music back onto the iphone, wit
-
Hi I have been doing some profiling (well, more like memory debugging really) of a J2EE application and I've noticed something strange. When I start the application server up 'standalone' with the -verbose:gc option I get a lot of output showing (mai
-
I can't restore my bookmarks, the file is not working.
I saved my bookmarks as a backup file but when I try to load the file it does not show up as a JSON file and when I load it by showing all files it says "this type of file is not supported". What do I do?