I want the wallpaper of this screenshot...[Found]

Oh, it's really beautiful, maybe using awesome WM, but where's the wallpaper? Anyone knows?
Last edited by cwjiof (2009-02-23 13:34:40)

Well, you're right. I'm writing the mail...
On the other hand, I just want to share the screenshot, which comes from gnome-look.org
Aha, I've gotten it! The wallpaper comes from customize.org.  So much wallpapers on this site!
Last edited by cwjiof (2009-02-20 04:10:46)

Similar Messages

  • I have a project and i want the coding of this project any one can help me

    Develop a console application called HospitalRosteringSystem that reads input files containing staff data and prints to standard output, a table representing a weekly staffing roster for a Hospital ward. The Hospital ward has 3 x 8 hour shifts per day, 7 days a week. On every shift there must be exactly 2 doctors and 4 nurses. No staff may work more than 2 consecutive shifts without at least 2 consecutive shifts to rest. Other than these constraints, you may use any combination of staff to ensure that your application generates a weekly staffing roster for the Hospital ward. The output should be similar to the following example:
    1               2               3
    Sun     Dr D. Smith          Dr S. Jones          Dr D. Smith
         Dr S. Jones          Dr G. Patterson     Dr K. Jackson
         F. Hurst          R. Barrett          P. Snark
         R. Barrett          W. Waterson          Y. Nelson
         K. Wilson          J. Garson          T. Emerton
         P. Harvey          K. Holland          J. Garson
    Mon     Dr D. Smith          Dr S. Jones          Dr K. McGey
         Dr I. Malle          Dr W. Watson          Dr O. Henrick
         S. Matthews          K. Temple          N. Marx
         J. Ucich          P. Gesburg          C. Milano
         E. Thatcher          U. White          L. Underhill
         F. Hurst          F. Hurst          R. Barrett
    Tue     Dr Q. Marshall     Dr P. Yin          Dr R. Jensen
         Dr W. Lung          Dr E. Whitty          Dr B. Furlong
         K. Wilson          J. Garson          K. Holland
         J. Ucich          J. Ucich          Y. Nelson
         P. Snark          K. Temple          N. Marx
         P. Harvey          R. Barrett          R. Barrett
    Wed     Dr S. McQueen          Dr P. Russo          Dr A. Lanely
         Dr M. Kendall          Dr M. Saxon          Dr V. Carlisle
         P. Snark          T. Emerton          J. Garson
         T. Emerton          K. Temple          W. Maple
         T. McMillan          D. Chard          J. Humphreys
         A. Talbot          M. Smith          H. Crooks
    Thu     Dr Q. Marshall     Dr S. Jones          Dr E. Whitty
         Dr K. Jackson          Dr I. Malle          Dr V. Carlisle
         K. Wilson          J. Garson          T. Emerton
         B. Bray          O. Knaggs          W. Waterson
         Y. Nelson          K. Temple          N. Marx
         P. Snark          N. Marx          H. Crooks
    Fri     Dr V. Carlisle     Dr D. Smith          Dr K. Jackson     
         Dr R. Jensen          Dr V. Carlisle     Dr R. Jensen
         K. Landers          G. Lancashire          F. Malony
         S. Carello          S. Ackery          D. Archer
         L. Pennyside          R. Tiffani          S. Benson
         Y. Henway          Z. Ruecastle          M. Fennelle
    Sat     Dr R. Jensen          Dr K. McGey          Dr B. Furlong
         Dr P. Russo           Dr W. Lung          Dr I. Malle
         G. Simpson          J. Lenman          U. Imri
         F. Peterman          B. Bray          S. Benson
         L. Pennyside          K. Bookman          F. Malony
         K. Bookman          J. Zimmerman          P. Carmichael
    There are 2 separate input files for doctors and nurses. These plaintext files are called doctors.dat and nurses.dat and are included in the project directory. You may assume that each file will contain no more than 100 names and that each name is unique.
    The application should also print out a summary of the total number of hours worked by each staff member to a file called summary.dat
    The format of the summary file should be similar to the following example (only the first 4 staff members are included in this example for the sake of brevity):
    Staff               Hours Rostered
    Dr D. Smith          32
    Dr S. Jones          24
    F. Hurst          24
    R. Barrett          40
    Note: The roster and summary do not need to be in any particular order.
    Documentation :: reports & logs
    Test Report
    Test Number     Description     Input     Expected Output     Actual Output     Further Action
    Error Log
    Error Number     Description     Cause     Fixed?

    Well i might be willing to do it. First you must tell me, why do you need it? Is it an Assignment from school? Or did you lie on your resume to get a job and now you dont know what to do when faced with real work ?
    Which of it is true ?
    If neither of these, then you may want to show the people here how much of it you have done on yourself and what parts of it are troubling you.
    Regards,

  • How can I import an m3u playlist into iTunes that intentionally contains duplicate tracks? I want the duplicates in this case.

    For instance, if my M3u file looks like the 2 lines below, only one copy of the mp3 file is imported. I'd like the same track to be imported twice.
    Back To Black.mp3
    Back To Black.mp3
    btw, the reason I'd like this to work is that I use a separater track in playlists between groups of similar tracks. This separater is not being imported correctly as is being unhelpfully recognised as an unwanted duplicate.
    Any advice appreciated.

    I just did the following.
    Created a m3u file with a series of tracks with one entry duplicated.
    Made a new empty playlist in a test iTunes library which did not contain the files and dragged the m3u file to that playlist.
    It created a duplicate playlist entry for that one duplicated track but of course it points to the same file.  If you really want iTunes to duplicate the file you will have to trick it into thinking it is a different file.  Using your library management preferences (which are identical to mine) you will have to duplicate the file in Finder so you really do have two files and add it again.  Perhaps if iTunes was managing the media it would not behave that way and might add the file twice since dragging to iTunes with default preferences settings just places a copy on the iTunes folder and leaves the original in place, so you'd be dong hte equivalent of dragging twice (I'd have to test to check this since I don't use default settings either).  With your settings it just refers to the original wherever it is.  Hopefully I've phrased that well enough.

  • I want the user exits in sd,mm,fi modules

    i want the user exits in sd,mm,fi modules.
    i dont want navigation. i want user exit names and function modules name.
    include names. which include is related to particular user exit.
    i want the information of this.

    Hi
    User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
    The naming standard of function modules for functionmodule exits is:
    EXIT_<program name><3 digit suffix>
    The call to a functionmodule exit is implemented as:
    CALL CUSTOMER.-FUNCTION <3 digit suffix>
    To find a Exit.
    Goto Transaction -- Find The Package
    SMOD >f4>Use the Package here to Find the Exits In the Package.
    Else if you Want to search by Application Area wise ,
    There is one more tab to find the Exits in the Respective Application Area.
    Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
    Now Run ur Transaction to Check if it Triggers.
    Thats it..
    Suppose you need to find out all the user exits related to a tcode.
    1. Execute the Tcode.
    2. Open the SAP program.
    3. Get the Development Class.
    4. Execute Tcode SE84.
    5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
    6. Enter the Development class and execute.
    Check out this thread..
    The specified item was not found.
    1. Type the transaction : system->status-> <PROG. NAME>
    2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
    3. Open CMOD utilities->SAP enhancements
    EDIT->All selections
    4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
    5. The displayed list contains the enhancements names for the transaction You were looking for.
    6. Create a project in CMOD and the code in default include->activate.
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    User-Exits
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/ab038.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.sap-basis-abap.com/sapab013.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
    These links will help you to learn more on user exits.
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    http://www.planetsap.com/userexit_main_page.htm
    http://www.allsaplinks.com/user_exit.html
    www.sap-img.com/abap/what-is-user-exits.htm
    Also please check these threads for more details about user exits.
    Re: Screen exit
    user exit and customer exit
    user exit
    <b>
    1. Document on UserExits in FI/CO
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    2. Finding User Exits...
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
    3. List of all User Exits...
    http://www.planetsap.com/userexit_main_page.htm</b>
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • NB500 - How to change the wallpaper?

    I would really appreciate if someone could tell me how to put a picture on my desktop background out of my pictures. I have Windows 7 starter on my Toshiba NB50.
    I tried to right click on my picture but when I did this it DID NOT give me an option to set as wallpaper. Please help I brought this thing 3 days ago and almost over it.
    Thank you Dann.

    Hi danny,
    Unfortunately Windows 7 Starter doesnt allow you to change the wallpaper. This is a Windows limitation on Windows 7 Starter Edition. The wallpaper can only be changed on Windows 7 Home Basic or higher versions.

  • When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online.  Do you still want to import the songs?"   This has happened for four CD's in a row now, Eagles - Hotel California.

    Hi All,
    When I attempt to import some regular, commercial CD's, iTunes returns the message "The song names for this CD could not be found online.  Do you still want to import the songs?"   This has happened for four CD's in a row now.  Today, after importing some other CD's in the regular way, all of a sudden, iTunes won't recognize the Eagles - "Hotel California" CD, the Eagles "**** Freezes Over" CD,  "The Best of Roy Orbison" or "Milestones" by Miles Davis.
    What happened?  Anybody know?

    We've gotten the same error at the same time. I guess we need to let this play out. In the meantime, I'm gonna update iTunes.

  • I am clearing through my phone for more memory. I want to delete some personal photos and videos of family forever, how can i do this ?. I do not want the photos or videos to be found anywhere.

    I am using a Iphone 5c device on software update IOS 7.1.2. I want to delete some personal videos and photos of my family and friends and myself. I am worried that if i delete them they may still be on my itunes account or icloud account. I do not want them on any of my accounts or files anywhere, I would like them gone off of everything. How can i do this?
    Thanks in advance.

    The answer is not simple. First, are these images in the Camera Roll or the Photos app? Next, do you have Photo Stream enabled? Also, do you back up your phone to your computer or to iCloud, or to both?
    If you have Photo Stream enabled then the images have already been distributed to anyone who is subscribed. Nothing that I can think of that you can do about that. The rest of this post assumes that Photo Stream was never turned on.
    If the images are in your Camera Roll you can delete them from the Camera app. The won't go anywhere, however, they will still be in your backups.
    If you back up to your computer using iTunes you can go to iTunes Preferences, Devices tab, and delete your backups. After deleting all of them, and also after you have deleted the images from the Camera Roll, do a new backup.
    After deleting the backups do a Secure Delete of deleted files on your computer. On a Mac you can do this with Disk Utility; have it erase deleted files. On Windows you need to get a 3rd party "shredder" app.
    If you back up to iCloud on the phone go to Settings/iCloud - Storage & backup - Manage Storage. Tap on each backup and delete it.
    If you have photos in the Photos app that are NOT in the Camera Roll album you need to connect your phone to iTunes, click on the Photos tab, uncheck all of them that you don't want (or uncheck Sync Photos if you want all of them gone), then sync.
    Then repeat all of the steps above.

  • HELP. "The requested URL was not found on this server." (iPhone videos)?

    So i was editing a bunch of videos on iMovie on my phone and while exporting, i didn't have enough space. So I thought that I would delete the videos off my Camera Roll (the ones i'm putting into iMovie) thinking that i would still be able to export and have enough space.
    It was the wrong decision because it resulted in having all the videos deleted even on iMovie. So i backed up my files on iTunes 2 days ago (luckily) and when i restored my files, the videos are back.
    BUT the videos that were saved from snapchat (they were going into the video i was putting together) wouldn't play! It shows the error "The requested URL was not found on this server".
    I looked up everything possible to try and fix it but i just can't find it the correct solution. I accidentally backed it up tonight and so the old back up file is gone. I really want to save these videos. The videos still show up in my Camera Roll, they just wouldn't play because the error shows up.
    When i connect my phone to my laptop (PC windows vista... I know its old but it works fine for me) it would show the option "open device files" or something. so when i open it, it shows the DCIM folder. And so i open that it shows all my pictures and videos.
    Problem is my snapchat videos show up as 0 bytes and still wouldnt play. I've attacted the error message just so you guys know what i'm talking about.
    I'm really sad and upset about this, so can anyone help me??
    pleaseeee!

    This might be helpful:
    http://support.apple.com/kb/HT4539

  • My laptop had to be reimaged and all software and programs were taken off.  I installed itunes again but can't access my library.  I get an error message "the folder itunes cannot be found or created and is required.  The default location for this folder

    I can't access my itunes music on my laptop after having it re-imaged.  I installed itunes again but can't access the music folder.  I get the following message when I click to open itunes:  "The folder itunes cannot be found or created, and is required.  The default location for this folder is the Music folder.
    I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each.  I want to sync everything -- should have close to 800 songs.  Tried to get support from Apple but would be charged for help. 

    I have a Windows 7 operating system my computer runs from.

  • I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it  loses my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

    I wanted to install windows for Mac and I had vista so I put I the disk and installed  followed the steps it then it  closed my  computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

    The two other posts are correct... so I'll just clarify.  What's happening right now is your system is trying to boot into Windows in order to finish the installation.  What you want to do is make it boot into OS X.  As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on.  You will eventually be presented with an option to select which partition you would like to boot from.  Choose OS X.  After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X.  What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
    Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition. 

  • How do I prevent the yellow bar from appearing across the top of Hotmail emails that says, "Additional plugins are required to display all the media on this page." I DO NOT want plugin. How do I get Firefox to stop sending message?

    Note: I did try to install the plugin just to see what would happen. When I clicked on "Install Missing Plugin" the next page said plugin could not be found---install manually. I clicked on manual install button and was directed to Adobe Flash Player - I already have current version of AFP installed.

    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
    *Adobe PDF Plug-In For Firefox and Netscape "9.4.0"
    **New Adobe ReaderX with Protected Mode just released 2010-11-19
    **See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
    *Shockwave Flash 10.0 r42 (included in case you do did not get the current version)
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #****NOTE: 10.x is the new Adobe ReaderX (Windows and Mac only as of this posting)
    #***Choose your language
    #***Download the file
    #***Windows: choose the .exe version
    #**'''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #*Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.
    #'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
    #*Download and SAVE to your Desktop so you can find the installer later
    #*If you do not have the current version, click on the "Player Download Center" link on the "Download..." page below
    #*After download is complete, exit Firefox
    #*Click on the installer you just downloaded and install
    #**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
    #*Start Firefox and check your version again or test the installation by going back to the download link below
    #*Download and information: http://www.adobe.com/software/flash/about/
    #**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
    #**Use IE to go to the above site to update the IE ActiveX
    #Update the [[Java]] plugin to the latest version.
    #*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    #*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    NOTE: Your VLC Player plug-ins is also way out of date; you have version Version 0.8.6f, copyright 1996-2007 The VideoLAN Team. Go to www.videolan.org , download and '''Save''' the VLC media player installer to your hard drive, close Firefox, run the installer.

  • I got this flashing question mark, i did some research into this and found out that the hard drive is the cause

    i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
    <Re-Titled By Host>

    There often were more than one build of Apple computer per model number designation...
    In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
    And both of these were 14-inch display models.
    •iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
    •iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
    •Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    There are a few fairly good repair guides online, some on http://iFixit.com site.
    Here's the link to the early iBook G3 series, includes color + white dualUSB.
    If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
    •iBook G3 Repair guides - iFixit:
    https://www.ifixit.com/Device/iBook_G3
    Either of these may be able to run a system no later than OS X Tiger 10.4.11.
    So a system install disc set could be used to troubleshoot, install, restore &
    prepare a replacement hard drive for a new system.
    Not certain what the issues are behind your situation, there may be more than
    meets the eye. Some models of iBook were more prone to hardware problems
    and as they age, fewer opportunities to affordably repair them exist.
    Good luck in resolving the iBook G3 issues...!

  • HT4527 I transeferred my itunes to a new computer via external hard drive, however over 4000 plus songs have a ! mark beside it and they cannt be played as itunes states that the location can not be found.  how do i fix this so all my music can be played.

    Hi
    I recently moved my itunes to a new computer by using a external hard drive.
    However my itunes music is not all playable.  over 4000 songs have a ! mark and when tried to be played or copied to ipod or iphone, it says that this song cannot be found and asks to locate it. 
    How do i fix this problem so that all my songs are available in itunes

    It is probably best to start over. These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • The volume "Music" cannot be found! Help how do I fix this??

    Hello,
    I was a happy macbook user living in Hong Kong until the my Macbook hard drive suddenly made clanking noises and failed.
    I had my computer serviced by CASE and they replaced the hard drive, but took a month and two weeks do it.
    Now I finally have my Macbook back, but now when I click on "Movies", "Music", or "Pictures" I get the following error: The volume "Movies" cannot be found, The volume "Music" cannot be found, and The volume "Pictures" cannot be found.
    I imagine this has something to do with the shortcut pointing to the wrong path. How can I correct this??? Thanks in advance.

    Hi Peter, and a warm welcome to the forums!
    I imagine this has something to do with the shortcut pointing to the wrong path.
    Great deduction on your part!
    I take it your clicking on the Icons in the Sidebar of the Finder Windows?
    If so, simply drag them off the side of the window.
    Then to put good ones in their place, open your Home Folder, the house Icon with your shortname, find the folders you want & drag them to the sidebar of the window where you drug the others from... arrange as you wish by dragging.

  • The software could not be found on any servers at this time

    Hello,
    Within the last few days OSD from within the OS has started to fail. The error it provides is
    The software could not be found on any servers at this time. I find this error misleading since I can PXE, connecting to the same server, and the OS installs without issue.
    For giggles I did try and install some updates and other software from the server and they installed using Software Center. With that my boundaries are setup and the client is communicating with the DP.
    Distribution Point='http://<server.domain>/SMS_DP_SMSPKG$/Content_f90faa01-0846-4704-9d86-d788273ab397.1', Locality='LOCAL' ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_50cea2c8-29cb-48c4-830b-571f72e14c04.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_d5a14c61-8ab2-4ec9-808a-ab6f89ab56f8.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0ea10922-95d6-4751-a3da-3dab19e70fa4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_310e7d49-0dd2-479b-886d-9c822ff214c4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_cc2d6253-a90d-489b-b294-7eb3ed645029.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a41d3047-5a90-400b-bc76-7808ff0c8503.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_fed1abf3-ab3b-45ef-9c20-8a419c2a13b6.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_879fade3-5b18-4959-bb2b-bc8a9bed1f71.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_16bba65e-16a6-49bd-b757-536e65ff94f1.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_4a8abdc6-2c2e-4f4c-b2ab-38306ba90425.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_0b1e115f-d8cf-4b2a-944e-bdd888c1775e.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_384b9d17-1502-467a-99ca-2669f0d1b5c7.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_68117c8a-50c3-4b95-9e3e-965238fe749a.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    Requesting locations synchronously for content Content_a38b2000-a2d6-4974-8409-827a76ad1b17.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
    I have a feeling the final line is the indicator to my problem, but I dont understand why. Unfortunately this seems to be happening at other sites as well.
    Edit
    I checked the boundary groups and made sure that they had at least 1 site server assigned. I also checked the permissions of Production (not-working) to Test (working) and they line up. When I choose 1 application/update to install the line
    The number of discovered DPs (including Branch DP and Multicast) is 0
    changes to 1. I also do not have the servers DP set to pre-deploy, if I recall that is the wording on the first tab of the DP settings. Also browsing the HTTP address provides results.

    Hi,
    The task sequence for unknown and known is the same.
    That is what I want to confirm. I did more research, and some indicate boundary issue:
    https://social.technet.microsoft.com/forums/systemcenter/en-US/75b22009-48ea-43b6-8992-b1f3d3bbe51c/the-software-could-not-be-found-on-any-servers-at-this-time
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for