I want to have Automator burn my latest podcasts
I want to have Automator burn my latest podcasts into an audio CD so that I can listen to my podcasts while I drive to work. However the "BURN CD" action in automator only burns MP3 files in a data CD format. Most cars, like mine, have a CD player that requires an audio CD. Why can't Automator burn an audio CD? Or can it? What am I doing wrong?
Does your CD player play MP3s, or just real AIFFs?
Have you tried telling iTunes to burn a Music CD?
Similar Messages
-
please help!! i've recently updated to the latest itunes version. after much hassle in doing so, it now tells me that the registry settings for importing or burning CD's/DVD's doesn't work and that i should reinstall itunes. i,ve done that from the website and from a saved position, but it doesn't work. i don't want to have to delete my library to have to start again !!!! there must be another way. it also said that it might be to do with other CD/DVD burning software, but i haven't put any on my computer that itunes didn't seem to lke before
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoitThere is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up -
i have an iphone 4 with ios 5.1.1 and i want to upgrade it to the latest ios 6 and not 7 because its too heavy for iphone 4 how can i do it?
You cannot. When you upgrade, you will get the latest version of iOS 7.
-
Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?
The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
http://support.apple.com/kb/ht4972
iOS 7.0.4 will be installed. -
I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?
Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2 -
i have an iphone 4 with 4.3.2 version, want to upgrade but my phone is not getting detected on my comp on itunes. i want to upgrade it to the latest version of the software, please help
If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone -
I want to run automation test in multiple device say iphone and ipad or two iphone device Is it possible.I have done automation testing using UIAutomation and get it running from iphone device
plzzz reply to this question as soon as possible
-
I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?
Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?
-
i have ip 3gs and ios 4.1 i want to upgrade it to download latest version of apps ,which ios will be compatible and is there any danger to update ios before i erased all settings and content and i tried to update but it failed .it is working properly but i want to update from itunes.iwill do back up but is there any other thing i will face after updating like it will jut show apple loge and will not work. please answer quickly
An iPhone 3GS is too old to update to the very latest iOS and you will never be able to use apps that are compatible. The phone is just too old now in technology terms and the app makers have all moved on, so it's time to get a new phone.
Ideally, perhaps get an iPhone 4s or if you can afford it, an iPhone 5s or 5c which are the newest models. -
I just reinstalled and this is the pop up that shows "You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?" what do i do next? it just keeps popping up and loading but only gives a quit button?
Update it.
How old is your Mac? If it's very recent you need to update via the App Store
If you purchased at the App Store you need to update via the App Store
Otherwise you update via Softare Update
Regards
TD -
Long story short, I made a backup using TimeMachine of my iMac. I got my MBA which was being repaired and i restored from backup. Everything works fine, except for iPhoto which is not saying:
"You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library?"
I have OS X 10.7.2 and iPhoto 9.1.4. I've tried:
Repairing permissions
Deleting iPhoto, installing agaian, and updating
Repaired iPhoto Library (stays stuck at 98% when rebuilding database)
I've also tried iPhoto Library manager which cannot even see the library
Tried restoring from backup from iPhoto and it messed up library (I still had my backup)
Quite frustrating - any ideas on how to get iPhoto back to life?Dunno why Software update was not displaying the latest version of iPhoto (9.2.1 as of January 27, 2012)...updating to this has fixed the issue
-
I have a mic hooked up through an interface and I'd like to open up my backing tracks then figure out what vocal effect sound good on what places during the song, then I want to have those automatically trigger while I'm singing and performing. Any help or suggestions would be much appreciated. Thanks.
Here’s a couple of links to get you started on your research...
OS X Lion Overview
iLife 11
http://www.apple.com/ilife/video-showcase/
http://www.apple.com/ilife/
Running Windows on a Mac
http://www.pcmag.com/article2/0,2817,2344661,00.asp
And just in case you didn't know... This is a User to User Forum -
i have just installed the latest update and the following message has come up. Text box - Unable to locate component. Message - the application failed to start because MSVCR80.dll was not found. Re-installing the application may fix the problem.
I have tried reinstalling and it has not helped.
I have gone to uninstall what ever is installed on the computer but cannot find itunes in the program list but do not want to just delete all apple applications with out knowing what they are. So, how do i delete the existing itunes program on my compouter??
I am also hoping that i will be able to do a restor eform the cloud once i get this sortedHello, fletch72.
Thank you for the question. I see you have uninstalled, reinstalled and the error is persisting. Try one more time uninstalling all components of iTunes in the order specified of the article below. These steps must be processed in the order specified or the error will persist. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, you will need to process the steps in the article below for each component and reinstall.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
please help with blocked plug ins i have down loaded the latest version of abode several time and am not getting anywhere this seems to be an ongoing problem when i get updates from them
When you download from the Adobe site, despite the button saying “install” — it really doesn't do anything but download the installer.
Quit the Safari browser. Next to the Trash icon on your Dock, is an icon that is an alias to your Downloads folder. Click this icon once. There will be a list of previous downloads that pops up. The file closest to the Dock is the Adobe Flash installer. Click this once to launch it. It will display like this:
Double-click the red flash folder. This produces the following dialog — you select Open.
You will receive a password challenge. Use your Mac OS login password. You next prompt will look like this. Choose the middle selection as I have shown:
The Adobe Flash Player will download and install via a blue progress bar. You will need to click a Finish button, and then Safari launches taking you to the Adobe site to verify Flash Player was installed.
In System Preferences, the bottom panel now has an Adobe Flash Player preference panel. It has an Advanced tab that enables you to check if there are newer releases of Adobe Flash available, and it wil also fetch the installer for you (usually). The System Preferences panel, and Safari must both be closed for Flash Player updates to succeed.
Eject the Adobe Flash Player installer from your Desktop.
Once Flash Player is installed, you may need to open Safari Preferences > Security, and check Internet plug-ins: Allow Plug-ins. Click the Manage Website Settings… button, and then select Adobe Flash Player in the left panel of the pop-up. You want Allow set When visiting other websites. Click Done, and close Safari Preferences.
Maybe you are looking for
-
Getting a error while deleting a personalized column in customer standard page.
Hi, I have added a column through personalization in standard customer page. The personalization was working fine in the standard pag and I can able to see the column in the account section. But when I deleted the column which I had added through per
-
I have an iTunes library on an old G4 QuickSilver that I want to move to my MacBook Pro, and have some of the albums and songs sync-up with iCloud so I can access them on my iPhone and iPad. A lot of the albums and songs on the G4 machine were uploa
-
IPod touch 4th Generation stuck in recovery mode after attempted update
I just want to save the stuff on there before I restore it. I know I'll need to restore at some point but is there any way I can back it up first?
-
Unable to create pdf file from multiple pdf files in Acrobat 7 Professional under Windows 7
I used to be able to cobine multiple pdf's into one but now, all I get is Acrobat freezing! I have to use task manager to allow me to close it! Any ideas ? Kind Regards Bob
-
Multi IDOCs to be sent to R/3 - how
I have a multi mapping that for 1 File produces 5 Finance IDOCS and 1 Stock IDOC. I have figured out how to do the message mapping. But now realise I cannot send all of these IDOC to SAP because IDOC Adapter is not in AE hence I get this error Messag