I want to render false for a Item in one Sub menu only

Hi all,
I have a page which is been used in four submenu under the same responsibility.
in this page now i want to hide an item for only one submenu
When i am trying to set the render property as false at any level(that is personalization at site level ,or OU level or Respnsibility level)is getting rendered false for all the Submenus.
Could you please let me know how can i hide this for only one sub menu.
Thanks
Ajay

Hi ,
requirement is bit tricky ,but i think there will be some value on the page which will identify that page has been rendered under which sub menu ,u need to identify that value and then need to extend the controller and set it render false conditionally based on the identified value in PR method of controller.
thanks
Pratap

Similar Messages

  • I want a push button for line items in my sales order entry screen.

    Hi,
    I want a push button for line items in my sales order entry screen.
    How can I do so?
    Thanks.

    Hi Kumar ,
    To have a push buttons you need to first assign a pf-status .
    here a sample code for a push button and its handling :
      set pf-status 'SELECT' .
    at user-command .
      describe table t_lpr lines w_lines .
      case sy-ucomm .
        when 'SELECTALL' .
          set pf-status 'SELECT' excluding 'SELECTALL' immediately.
          do w_lines times .
            read line w_line field value w_check . " INTO W_CHECK .
            if w_check = space .
              w_check = 'X' .
              modify line w_line field value w_check.    "INTO W_CHECK .
              add 1 to w_line .
            endif .                        " IF W_CHECK = ' '
          enddo .
    Thus when you say pf-status say 'select' , Double click on that and you find a screen eher you can select icons and assign a function code to it!
    Hope it helps!
    Much Regards,
    Amuktha .

  • How to set render false for OALink Bean

    Hi friends,
    is it possible to set render false for OALinkBean.
    i am using the following code but it is not working
    OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
    if(projectType.equals("XYZ"))
    LinkBean.setRendered(false);
    }

    previously i was using this code for hiding the subtablink but this code was not working
    OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
    LinkBean.setRendered(false);
    but now i am using following code and this code is working fine
    OASubTabLayoutBean subTab = (OASubTabLayoutBean)webBean.findChildRecursive("subTabLayoutRN");
    if(subTab != null)
    subTab.hideSubTab(2,true);
    }

  • Admin Personalization to False for the item

    Using Note 236618.1 - OA Framework Personalization and Extensibility Guide: Version 5.7+
    for personalization of OA Framework and the following question has arisen:
    I inadvertenly set the Admin Personalization to False for the item "Header: Discount Alerts" while attempting to figure out how to hide an item. The result of this is that I am no longer able to edit this item (i.e., the pencil icon is no longer available from the Personalizations page).
    Because I cannot edit the item now, I am unable to set it back to the way it was (i.e, Admin Personalizations 'Inherit').
    Is there a way I can set it back to the way it was ?

    Omit,
    If you meant how to delete the personalization you have done, back to original form, you use Functional Administrator and use the page name to enter in to the personalization tool to delete it. You can also delete the personalization from db directly by using
    exec jdr_utils.listCustomizations('<page_name>')
    this will list the set of customizations that you have done, pick the appropriate personalization document and use
    exec jdr_utils.deleteDocument('...');
    commit;
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

    Hold down Option key while clicking on menu bar and Save as will appear.

  • I want to cancel membership for two items

    I want to cancel membership for one product and then cancel for Reader.  I have never ordered from a website that was so difficult to figure out.
    Please help me.
    Barbara

    If you have not purchased from website, then you can not cancel it also online, you need to contact the store or the reseller from where you have purchased.
    Regards
    Rajshree

  • Why can't I open items in iDVD sub menu & Open Existing project lists?

    Recently I installed *Jam Pack-Music of the World*. Since then, my iMac experienced one Kernal Panic while I was using iMovie. Later I tried to burn the movie I had been working on, iDVD got stuck at audio encoding and then quit unexpectedly a while later. When I tried to +'Open Existing project'+ in iDVD, I noticed the list of files in the *Movie folder* of the iDVD dialogue window are shaded grey and could not be opened. (They could however be opened from the *Documents foder* where they are shown as .dvdproject files.) Additionally it became clear that about 40-50 GB of storage space on the hard drive had been lost. I have also noticed that the items listed in the *iDVD sub menu* (tool bar) are also grey and cannot be opened - although if I first open a project from the documents folder these items then show black and can be opened. I've had my iMac for 18 months and had no real problems till now. I'm new to computing and at a loss as to what's happened and how to rectify it.

    I don't purport to be an expert, but since you have not gotten a response as yet, I'll give you my comment.
    If you got a Kernal Panic, your computer is in need of some maintenance. The following recipe is from one of the gurus on the iMovie formum in a different context. " Restart from your install disk (by holding down the C key as you restart), and go to Disk Utility, then repair the hard disk. Restart as normal and then repair permissions from the same utility."
    Make sure that you have enough free space on your hard drive for these programs to work -- at least 15GB and better 25GB.
    You could also try uninstalling Jam Pack-Music of the World, and see if that clears up the problem.
    Good luck.

  • Are you sure you want to edit information for multiple items?

    Hi all,
    I'm getting this dialog box consistently now, not sure why. I get it when I select a single album from a single artist, for example. I get it when I select a couple of tracks within an album from an artist. Bizarre!
    It became apparent to me as I added artwork for albums that didn't have any... Any idea why iTunes has started behaving this way and what I can to to get it to behave normally?
    Thanks for any insights...

    Chris CA wrote:
    Yes it is normal behavior because you are selecting *more than one item*.
    I have never not gotten that message if I select more than one item.
    It should appear and has always worked that way because it is more than one item, regardless of anything else (same artist, same album, etc.).
    You can check the box, *"Do not show me this again"* and it will not appear.
    Okay, I might have checked that box. Still, sometimes I do get that dialog popping up.
    How would you explain that if not with different values in the metadata ?

  • Search for multiple items in one text field

    Hi all,
    I am new to ApEx, I have a request from one of our users to ask if there is a way we can allow them to enter more than one search items delimited by a comma. For instance, we have a text item field for user to enter some values as emp names, when he key in like PETER,SMITH,ALLEN,WARD, once he submit the page he will see the result as:
    select t.empno, t.ename, t.job, t.mgr, t.hiredate, t.sal
    from scott.emp t
    where t.ename in('PETER','SMITH','ALLEN','WARD')
    Many thanks.
    Message was edited by:
    lcpx

    You can create a multiselect list named P1_REPORT_SEARCH based on a List of Values (LOV) with those employee names and use this code.
    select t.empno, t.ename, t.job, t.mgr, t.hiredate, t.sal
    from emp t
    where
    (instr(':'||:P1_REPORT_SEARCH ||':',':'||ENAME||':') > 0 or :P1_REPORT_SEARCH is null) /**for multiselect**/
    )

  • How do I setup a keyboard shortcut for an item in the Services menu?

    In every Application, under the application menu is a "Services" folder. I would like to be able to setup a keyboard shortcut for one of these services (namely Skype).
    I am a heavy user of the "Services > Skype > Call" command and I would love to have a keyboard shortcut for it.
    I went to System Preferences > Keyboard & Mouse > Keyboard Shortcuts, clicked on the plus sign to create a new shortcut (all applications) and entered "Services…Skype…Call" and assigned it to a keyboard command (shift-F1).
    It doesn't work. Any clue as to what I am doing wrong?

    Hi
    Also - have a look at the reply I gave at the link below (sorry - don't know how to insert proper links here).
    May be of interest, maybe not.
    Best,
    D
    http://discussions.apple.com/message.jspa?messageID=7932030#7932030

  • Tollerence group for open item only

    hii all
    can any one tell me, if I want to make tollerece group fo employees and also want to specify the tollerence limit for amount posted per document only. not want specify tollerence limit for open item account (customer/vendor). is it possible? i have done blank in "amount per open item account" but the system not allow to post any vendor/ customer invoice. is it possible to solve

    Hi,
    It is possible to control the users or employees for a certain amount,by configuring  as shown as following Path
    FA-G/L Accounting-Business Transactions-Open item clearing-Clearing Differences-Define for Employee and the
    G/L acconts.
    MAy i hopeful, ths will hep p
    Regards,
    Kanike

  • How to create a display value and a return value for an item

    Hi! I have an item on a form. I want the default value for my item to be :":APP_USER", but the return value, to be the id of my user. I tried to create a PL/SQL Expression for the default item, but it doesn't work. What do I miss?
    It should be something like this, but it's not.
    begin
    select first_name || ',' ||last_name as "Employee",
    id_employee -- display value,return value
    from employees
    where id_employee = :APP_USER;
    end;
    Does anyone know?
    Thanks!
    Vitaly

    Hi VItaly,
    Display value and return value concept applies very well in case of a Combo box if i am correct, I don't know what type of item is your's.
    But any way, you can have a workaround like,
    Create a hidden item such that it's default value should be ID of the user which can be get from db by using :APP_USER.
    Use the this item for your references.
    I think this will meet your requirement.
    Thanks
    Kumaraswamy.

  • Tables names for below items

    HI All,
    i want the table names for below items :
    customer number , customer name , slaes order number , item , quantity , tottal value and schedule date.
    i need to select these items. any body pls tell me the table names .
    Regards,
    pandu

    Dear Pandurangarao,
    For your future requirements,
    You may also check the same (i.e. Table Name/ Field Name/ Program Name/ Screen Field) by yourself.
    There are few requirements:
    1. You have to decide from where (i.e. Document..???, say Sales Order in VA02) you want to fecth the data for your requirement.
    2. Go in to that document (say, you wanna all data to be fetch from Sales Order; then VA02).
    3. Click one within the field and Press F1. This will open an Overview window. In to the same window, down there, you will find on e Tab: Technical Information. Click the Tab.
    4. Now, you may get all technical informations for your inputs.
    Best Regards,
    Amit

  • Possible to create a form with different options for different items?

    So I want to create a form in DW but the problem is that I have 3 items....and I want different form subjects for each item? Is there a way to do this so that if select item #1 that 1 set of options comes up....if I select item #2 a different set of options etc.??
    thanks much!

    Another simple example that you can style up.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>Untitled Document</title>
    <script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
    <script>
    $(document).ready(function() {
    $('#option_2, #option_3').hide();
    $('#selectOption_1').click(function() {
    $('#option_1').show();
    $('#option_2, #option_3').hide();
    $('#selectOption_2').click(function() {
    $('#option_2').show();
    $('#option_1, #option_3').hide();
    $('#selectOption_3').click(function() {
    $('#option_3').show();
    $('#option_1, #option_2').hide();
    </script>
    </head>
    <body>
    <form>
    <select>
    <option id="selectOption_1" value="option_1">Option 1</option>
    <option id="selectOption_2" value="option_2">Option 2</option>
    <option id="selectOption_3" value="option_3">Option 3</option>
    </select>
    <div id="option_1">
    <select>
    <option value="option_1_1">Option 1_1</option>
    <option value="option_1_2">Option 1_2</option>
    <option value="option_1_3">Option 1_3</option>
    </select>
    </div>
    <div id="option_2">
    <select>
    <option value="option_2_1">Option 2_1</option>
    <option value="option_2_2">Option 2_2</option>
    <option value="option_2_3">Option 2_3</option>
    </select>
    </div>
    <div id="option_3">
    <select>
    <option value="option_3_1">Option 3_1</option>
    <option value="option_3_2">Option 3_2</option>
    <option value="option_3_3">Option 3_3</option>
    </select>
    </div>
    </form>
    </body>
    </html>

  • Inspecyion lot for delivery item

    Hi Experts,
    Please help.
    I have created sales order. Then created Production order with reference to that sales order. Processed poduction order. Stock posted to QM stock. Done Result recording & UD. Stock posted to Unres.use stock. Now I want to quality inspect for delivery item of same sales order.and want to create quality certificate. What are setting require.
    Please tell step by step.

    Dear Raja,
    Adding to Shyamal answer for Inspection for delivery you may have to do these steps also
    1) SPRO > QM> Quality Inspection > Inspection lot creation > inspection at shipping > Assign inspection type to delivery type> assign inspection type 10 to the delivery type you need the inspection
    2) Maintain customer info Record. QV51 which is a customer ,material combination. You can specify whether or not an inspection lot is created before or after the goods are shipped, or whether the quality inspection will be carried out by the customer.Also you can maintain default customer specifications for a customer or customer information records for customer/material combinations
    3) Maintain 10 inspection type in MM02.
    4) Create the inspection plan using the relevant Usage
    Hope this helps
    Regards
    gajesh

Maybe you are looking for