I want to reset my Airport Express, but I get a message that my airport configuration program is too new.(mavericks).
I want to reset my Airport Express (older version), but I get a message that my airport configuration program in mavericks is too new.
Mavericks does not support the older AirPort Express, so you will need to use....or borrow...a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older Express.
Similar Messages
-
I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?
After install, did you go to Apple menu > Software Update to update your FCE to the latest version?
MtD -
I started to download Firefox and without realizing it I agreed to some additional programs that I do not want on my computer. The ones I can identify are ConstaSurf and SearchProtect. When I try to delete them, I get a notification that they are in use or in another file, and it won't let me delete them. I would like to delete them and then try downloading Firefox more carefully. Thanks for any help. I am not computer savvy.
See this: http://malwaretips.com/blogs/constasurf-virus-removal/
For step 1 - Uninstall ConstaSurf program from your computer - thru the Control Panel
If that's where you get that message about them bring in use, try closing Firefox and any other browsers that you may have open and then try to uninstall those two. -
I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception. -
I want to download Keynote to my computer that I run 10.6.8 on. But I get a message that says that I need 10.7.4 or higher. Where can I find a version of Keynote that I can download to my computer?
Purchase Mac OS X 10.8 from the Mac App Store. If it reports that 10.8 is incompatible with the system, choose About this Mac from the Apple menu. If the computer has a Core 2 Duo or better processor, phone the online Apple Store and order a download code for Mac OS X 10.7. If not or you don't want to upgrade, check sites such as Amazon or eBay for the DVD.
(71736) -
I want to install the creative Cloud but there is a message that says "This section of Creative Cloud is experiencing unexpected server errors"
I want to install the creative Cloud but there is a message that says "This section of Creative Cloud is experiencing unexpected server errors"
Can somebody explain why??????? -
How do I upgrade the iOs on my ipad1 to version5? I've tried through itunes many times, but I get a message that says that the download was interrupted and i should try again later. Can i download the iOS file to my PC and transfer it to the ipad? How should I do that?
Thank you!
Disabling firewall and AV did the trick!
Kudos.
Alex -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my queryYou need to activate Photoshop.
Mylenium -
How do I sync a movie downloaded to iTunes, but I get a message that says "Cannot sync movie to iPod because this computer is not authorized"? How do I fix this?
And I assume you have already checked to see if your iTunes purchases are authorized by choosing Store -> Authorize This Computer?
Some have been able to resolve this issue by removing the downloaded purchase and redownloading it again at no cost via iCloud. See this article for more information on redownloading past purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock -
Hi everybody, I need help.
I requested an unlock from T-mobile UK 1.5M ago, and after the restore I got the message that my iphones carrier setttings were updated successfully, but never get the message that it's unlocked. And it still doesn't support nay other SIM. What am I doing wrong? How do I get it unlocked?
Thanks in advance for adviceDid you restore the phone as a new device when you did the restore/unlock, or did you restore it from an existing backup? I have found that when unlocking an iPhone on the AT&T network, you don't get the message that the unlock was successful if you don't restore as a new device. The unlock still works, you just don't get the message. Perhaps it is not carrier specific for this behavior.
-
Can't open mail and app store. I've tried to reinstall Maveriks using recovery but I get a message that I can install using my apple ID. Any help??
Disable your antivirus and firewall, and try again.
-
Am trying switch from an earlier iPhone to an iPhone4. I have had the Simcard cut to the right size and put it in the iPhone 4 and gone to iTunes. I have clicked on Restore but I get the message that this cannot be done: "unknown error 1604" . What to do now, please?
Thanks, good suggestion, but after trying recommendationsthere I still have the problem of error 1604 happening and no progess.
-
I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JPThanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP
Maybe you are looking for
-
Installing Yosemite on iMac 2013 hangs with status bar midway
Trying to install Yosemite, but screen just displays a white screen with apple logo and the status bar is around 50 % been running for about 4.5 hrs, will leave overnight, but then what if no joy. I Thought that Apple was good over these types of thi
-
TNS:No listener error: Please help me
Hi all, I have installed Oracle 10g in my laptop.few weeks back i was able to work on that. But today when i tried to connect to my database(im using Toad) i am getting TNS:No Listener error. I checked in Listener.ORA file also. All seems to be fine.
-
Hi, I have configured a email notification for user status : in process. mail to be sent to msg processor condition i hve given as &CRM Service Process.User Status& = E0002SLFN0001 ie when the msg goes to in process mail shd be triggered to msg pro
-
How to see WAS version and XI/PI version..?
Hi folks, Can anyone tell me how to see the WAS version and XI/PI SP number. thanks in advance. Srinivas Reddy.
-
CS2 documents print yellow ink only
I'm on a Mac running OSX 10.4.11. When printing InDesign CS2 docs to my Canon i80 printer the documents printed out gray instead of black. Today I was prompted to install InDesign April 2005 Compatibility Updater. I did so hoping this would be the fi