I was just on the internet, but now its saying im not connected
i was just using it, then i went in the other room and it said i wasn't connected to the internet anymore. How can i get wireless at all times?
Are you saying that you moved your computer between rooms and it lost it's wireless connection? If so, this is a common problem with wireless. Wireless signals have difficulties getting through various types of building materials, and distance from the wireless access point matters.
In large households it is common to have to deploy one or more wireless repeaters in order to get reliable and useable connectivity throughout the household.
I used to use an Airport Extreme and several Airpor Express base stations to repeat my signals from the back of the house, where my DSL router is, to the front of the house - the two farthest points.
I just switched to the new Airport Extreme N base stations, using two of them configured with the 2nd one extending the signal from the first, and the signal and speed is now amazing.
Similar Messages
-
I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help
Reset the PRAM.
http://support.apple.com/kb/HT1379
If that fails, reset the PMU.
Scroll down the following page and click the G5 link for instructions:
http://support.apple.com/kb/ht1939 -
my phone just got repaired but i allowed for my niece to play with it but now its say iphone disabled connect to itunes what do i do
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps... -
I have just done the iso update now its saying connect to i tunes buot i dont have a laptop how can i get around this?
You can't get around it. It must be restore using iTunes on a computer. If you don't have access to one, make an appointment at the genius bar of your local Apple Store.
-
Music missing from iPhone 4s after update to IOS 8.3
Please, make sure you follow these instructions: Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
Or, if you use Wi-FI to sync music, make sure you have it enabled on your phone and wait till all the music tracks are synced.
To set up syncing over Wi-Fi, follow these instructions: Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
My MacBook Pro has slowed to a crawl. It started when I was printing off the internet. Now I get a "spinning ball" with many actions. Any help?
Try your fellow MacBook Pro owners forum -
MacBook Pro
Support:
http://www.apple.com/support/macbookpro
Latest (manual) downloads from Apple (but check vendor sites also for scanners, printers etc) and rule out a bad cable as well.
Apple Downloads -
i have recently lost my iphone 4 , it had icloud installed , which i was monitoring on the internet, but my phone wasn't turned on . i accidently deleted icloud on my pc , is there any way i can reverse this , to enable me to try to find my phone
You can simply login to iCloud: https://www.icloud.com and then go to Find My iPhone...but if the iPhone is turned off or restored to factory settings it won't show up.
-
i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?http://www.apple.com/support/mac/app-store/contact/
-
I tried to delete a calendar while in the app, but now it says the action is not supported in the server? There is also a pop-up that appears every 30 seconds to tell me about the error.
Probably better to be posting this in the Calendar forum.
-
when i click some thing on facebook a window pops up
before i could right click the link in the window
but now its got a dot line box around it and i cant helpCan you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
it kept on crashing so i deleted so i could reinstall it but now its saying that my security systems doesnt allow this program
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
*https://support.mozilla.com/kb/Unable+to+download+or+save+files -
can't restore apple id , because apple were blocked for security reasons, but to restore the need to enter the key two- step werification . after typing it , apple sends a 4-digit code on the ipad , but at ipad I am not connected to icloud ,so i cant get code . but if i want to recover apple id, i need to connect icloud, so what to do? help !
I have (sorry forgot to add that). I was switched around and finally I was told I would be put through to a supervisor but after being on hold for about 10 minutes the phone went dead, I did not lose connection so I do not know if I was hung up on or there was some technical difficulty. I called again yesterday and did in fact speak with a supervisor for Account Security but he told me he did not know why it was happening and put me through to a different number but that ended up not being any helpful either. That's when I decided to give it a shot on here!
-
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2
Maybe you are looking for
-
On my iMac, i created different accounts for the member of the family. When i switch from one to an other account and go back to the first account the wallpaper change automaticly to a solid color wallpaper. I have tried all the solution described on
-
have used all previous versions of dw. no prior problem with server-side includes. now, they are not showing up in design view. Yes, I have marked preferences to include hidden items/server side includes. any thoughts anyone?
-
SOA Suite - " usermessagingdriver-email " & SSL issue.
Hi All, We are about to install SSL certificate on Weblogic 10.3.6 server ( built in windows ). We have followed the below steps to install and configure the SSL certificate. 1. Created a Keystore 2. Generated a Certificate Signing Request (CSR) 3. S
-
does anyone have an idea on how can i load essbase applications to EPMA? Thanks, Hanson
-
Really disappointed with Apple. Terrible service!