I went into the lake when on holiday with my pay as you go Iphone4S in my pocket and now it's water damaged. Can Apple do anything to help?

I purchased it just 4 weeks ago.
Thanks in advance.

Apple has an out of warranty or not covered under the warranty "repair" price which pays for an exchange at a discounted price off the full retail sales price.

Similar Messages

Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it??

Forgot the passcode to my ipad. When I went to restore it, it asked me if I wanted to update the software so I said yes. It then went into recovery mode, I'm guessing, with the connect to iTunes showing on the screen. Now iTunes will not recognize it so I have no idea how to get it back! Help!!

Then you will need to try restoring it once more:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

When I go to add songs from my iTunes library it shows that it went into the iPod but when I look on my iPod the song is not there?

When I go to add songs from my iTunes library it shows that it went into the iPod but when I look on my iPod the song is not there?

Sorry! Figured it out. Just took awhile to load.

TS3274 My iPad App Store suddenly all went into the Spanish lanuage when all else and my Setting identifies the language to be English. I cannot get it back to English. It appears to be related to an upgrade which is indicatd but I do not know.

My iPad App Store app suddenly all went into the Spanish language when all else and my Setting identifies my language as English. I do not know how to get it back to the English language. It appears to have come with an upgrade as it happened as there was a red circle with "3", but it does not upgrade. All the icons in the store and the descriptions are in Spanish.

Change Language
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.

You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

My 10.5.8 mail app went into the trash

My mail app on my 10.5.8 went into the trash by accident. I can't find my disk to reload it. Where can I download the disk for this compnuter?

Togh to tell on the lost folders.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, or are running 10.7+, at least try it from the Safe Boot part onward.

After updating to itunes 10.4 restarted, my ipod touch went into restore mode. when trying to restore it says unexpected error occured (1604) followed resolution checklist . still wont work, any thoughts............

After updating to itunes 10.4 restarted my pc windows 7 64 bit, my ipod touch 3rd gen went into restore mode,when trying to restore it works for several minutes then says it cannot be restored, unexpected error occured (1604) I have followed the reslution checklists, still wont work, any thoughts?

Hi
Cannot offer any thoughts other then i am having the same problem. updated my itunes windows7 32bit ipod touch 4th gen. went into restore mode lost over 700 songs. i dont get any error messages i just cannot get into itunes store. Firewall is allowing access, etc resolution checklists done, and nothing.
Hopefully this issue is fixed up soon...

In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

In trying to transfer iWeb pages (not uploaded) to another computer I went into the Library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. On opening the domain all I can recover is the many component parts, and when unzipped the code. Help! Mike

Code in a domain file - really? That is not possible because the domain.sites file does not contain any html or css code at all - the domain file is your iWeb data file and you won't see any code until you publish your website.
If you can see html code, then you have the wrong file and it is a published version of your site which iWeb can do nothing with - iWeb has no import facility so cannot open any html files.
Go back and ensure that you have the correct domain.sites files that can be found under your User Library/Application Support/iWeb/domain.sites and if you have Mavericks then you need to go to Go and press the alt key to reveal your hidden User Library, so that you can then get to Application Support and then iWeb and then your domain.sites file.
You will also need to go and download either DomainCracker or iWebSwitch which allows you to open individual domain files under Mavericks, because from Lion onwards, you cannot open individual domain files.
Also, it says that you are still using iWeb 08? If this is so, you'll either need to upgrade to iWeb 09 by going to Amazon and purchasing the iLife 09 or 11 boxed set, both of which contain iWeb 09 or you need to switch to newer software that is actively being supported and developed such as EverWeb (http://www.everwebapp.com).

My phone went into Factory settings when I plugged it into Itunes. Now it won't open up in Itunes to restore my info. What do I do?

My Iphone went into Factory settings when I Synced it to Itunes. Now it won't open in Itunes to restore my info. What do I do?

I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I got a new phone and phone number two weeks ago, I like to iMessage on my macbook pro but none of my new conversations show up, I went into the preferences to change the settings so only conversations from my new number show up, but there is no change.

If anyone can please help me, I would like to continue using iMessage on my laptop, but none of my new conversations exist only the older ones. I went into the iMessage preferences to delete my old number off the iMessage account and added my new number and email but I still don't get any new messages. Can somebody please tell me what I am doing wrong or how to change it further?
Please and thanks.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I received an error "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened b4

i received an error message "iTunes requires 64-bit mode" says to go into my iTunes application and 'uncheck' the 'open in 32-bit mode' checkbox - i went into the application and the box was not checked anyway so why am i getting this prompt? Never happened before. yesterday did the sofware update for maverick.

Thank you for your response, Chris. But I'm afraid I have to disagree. There are native 64 bit versions of iTunes available for OSX and Windows.
In a 64 Bit Windows environment native 64 Bit Applications install the DLL's in a directory called "Program Files" and a directory called "Program Files (x86)" (32 Bit applications only use the ladder).
iTunes 9 is consistent with this behavior - and it identified itself to the system as a 64 bit application (meaning it's process appears without a "*32" tag on it).

I just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

just ripped quite a few music albums. How do I know if they went into the cloud, and if they did not, how do I get them into the cloud

I assume you have iTunes Match turned on in iTunes?
You can create a smart playlist in iTunes that has "iCloud Status" is "Matched" or "Upload" - that will tell you what's in the cloud.

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your

Lost all contact info. All my Aps are there but all the data/progress is missing. When I plug my iphone into the usb fto synch up with my itunes on the computer a message comes up and says "enter the password to unlock your iphone backup file". This is very frustrating

I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.

I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume

I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers

Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

I went into the lake when on holiday with my pay as you go Iphone4S in my pocket and now it's water damaged. Can Apple do anything to help?

Similar Messages

Maybe you are looking for