I would like to do a change of ownership please
I am struggling to get over the 1st hurdle of transferring my EE accounts into my daughter's name and was told this should be relatively easy and can be done by e-mail. It always seems to be someone else's department!
It can not be done by email as there is no email.
You need to ring 150 whilst you both are present.
Request this and then once your daughter has gone through security questions and a credit check the account will change to her name on next billing cycle.
Similar Messages
-
I would like to make some changes in GR91 payment term
Hi Gurus,
I am pretty new to SAP ERP. I got assigned the ticket as requested below.
Business requirement:
I would like to make some changes in GR91 payment term.
1. 85 days from invoices (instead of 93)
2. Only the 5th of each month , will be the bline day (payment day), instead of 5th & 20 th.
My Analysis:
I have checked OBB8 in EED system for payment term GR91 and I could see the below 3. Here I have attached one file with business requirement and GR91 payment term screenshot.
1. PT - GR91
Day Limit - 4
Fixed day - 5
Additional Months - 3
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 01-04 at 5th (93 days frm Invoice)
1. PT - GR91
Day Limit - 19
Fixed day - 20
Additional Months - 3
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 5-19 at 20th (93 days from invoice)
1. PT - GR91
Day Limit - 31
Fixed day - 5
Additional Months - 4
Default baseline date - Document date
Sales Text - 20-31 at 5th (93 days frm Inv)
Own Explanation - 20-31 at 5th (93 days from invoice)
Please help me in this regard. How could I go ahead with configuration, what are the options I should select in OBB8.
Thanks in advance for your help............
Thanks & Regards,
SivaHi Siva,
Day limite 5 doesn't allow GR91 use after 5th day. So you will have precisely 85 day.
If you want have unlimited day use and fixed day you have never precisely 85 days.
Please do a test. Define OBB8 and replace a Vendor Invoice Payment term to GR91. Look at FBL1N the due date.
regards -
I would like to avoid itunes change by itself metadata
I would like to avoid itunes change by itself metadata such artist album, writer,comments,cover artwork. I don't want to use these informations but itunes provide to fill them even I didn't check the "find name tracks nor get album artwork". Thank you very much
Perhaps I wasn't clear. iTunes does not get info from the internet unless you are ripping from a CD and it queries the Gracenote/CDDB database. Itunes is too stupid to update songs automatically once they have been added to your library.
I saw the exact same thing as you described, hex numbers in the comments field such as "000B 0A4D 302C...."and it was caused by a WMP update and the settings going back to default. It also filled in composer information, Album Artist, and deleted the track x of y information.
You may think itunes is doing it because these changes also show in itunes after WMP has done its work.
If WMP is still doing this, make sure those options are turned off for all Windows user logins on the PC.
Here are some older threads with the same problem
from 2008--https://discussions.apple.com/message/8622995?messageID=8622995#8622995?messageI D=8622995
from 2009--https://discussions.apple.com/message/10539214?messageID=10539214#10539214?messa geID=10539214
This person said it was itunes sound check doing it, but it has never happened to me
https://discussions.apple.com/message/8434989?messageID=8434989 -
Hello, I'm French, i would like to know how make e-commerce please ?
Hello, I'm French, i would like to know how make e-commerce please ?
Hi,
Below are few links for a similar forum thread, and some video tutorials and widgets to create an e-commerce site:
Re: What is good ecommerce solution for MUSE
Adding Ecommerce To Adobe Muse - Set Up An Online Store - YouTube
Adobe Muse Online Store - Setting up eCommerce by Muse-Themes.com
Add an Adobe Muse E-commerce Shopping Cart to Your Site
Adobe Muse ECommerce Widget -- ShopLocket Tutorial | MuseThemes.com - YouTube
Hope it helps,
Sonam -
I have an MP3 file but would like to create a new one. Please help!
I would like to take a current MP3 that I have on file and create a new MP3 using only the first 20 seconds of the original. How do I do this?
(I have iTunes and another program called something like iGarageBand)
Thanks!How do I open it in GarageBand
Create a new basic track, then drag the MP3 into the
track. Use command-T to split the track where you
want.
and how do you convert
it back to an MP3 in iTunes?
Use "Export to iTunes" in GarageBand. The file in
iTunes will be an AIFF; use "Convert Selection to
MP3" in the Advanced menu to convert it to an MP3.
Your posts have been so helpful, thank you!
I thought that it would have been more straightforward in how to delete the rest of the track... I guess I need a little pointer in that area too.
So far, I've imported the track and split it at where I'd like. After that, I have no idea on how to delete the rest of the track. So... how do I do that?
THANK YOU!!! -
Would like to understand WHY changing the IP address seems to make a difference.
I have had significant difficulty getting my WRT54G v5 to pass to the internet multiple pcs connected by cable and/or wireless. Default settings seemed to work fine to log into the LAN, but only 1 connection would go to the internet. I called Linksys tech support and they successfully got me over at least the initial hurdle so that my 2 main pcs can now function, and a 3rd seems to also get through. I've seen in this forum a BUNCH of similar posts, including some which say that success only lasts for brief periods of time.
What changed to get mine to work???.......192.168.1.1 was changed to 192.168.2.1. What I'd like to understand is.......why does that make a difference?
I am not a networking technical guru by any means, but am I a novice to technical discussion. Simply changing the address to go from not working to working does not make sense to me, and I'd like it to make sense so I can support this thing without spending hours every weekend.
Linksys, can you please explain?The address pool of the DHCP server are just the IP addresses which the DHCP server uses to assign them to devices which ask for an IP address via DHCP (e.g. computers which are set to obtain their IP address automatically). The DHCP server automatically supplies those devices with an IP address and assigns the correct subnet mask, gateway address, and dns servers.
This has nothing to do which IP address actually have internet access or not. After the device got its IP configuration from the DHCP server this configuration works just like any other configuration you may statically configure on some other devices.
The router connects all IP addresses inside your LAN to the internet as long as the devices use the router IP address as default gateway.
If you router has an LAN IP address 192.168.1.1 and a subnet mask 255.255.255.0 these two numbers together define that all addresses 192.168.1.* are part of the LAN. 192.168.1.0 is a special purpose address. 192.168.1.255 is the broadcast address of this LAN. Everything from 192.168.1.1-254 are normal IP addresses inside your LAN (with .1 obviously allocated by your router). Operating as gateway between the LAN and the internet the router accepts traffic from any of the LAN addresses and forwards it into the internet and receives the responses and sends them back into your LAN.
For the routing/gateway part of the router it is irrelevant where the device got its IP address from. This part does not know about the DHCP server. All that matters here is that the IP address is valid and inside the LAN subnet. If the device has a static IP address or DHCP assigned IP address does not matter.
It does not matter which IP address range the DHCP server assigns. Linksys uses 100-149 as default. Some other routers assign 2-100. Some others assign 2-254. Assign whatever you like. Orderly people split their subnet into various parts, e.g. assigning 10-19 to NAS devices with static IP, 20-29 for printers with static IP, 30-39 for VOIP phones with static IP, 50-99 for DHCP, 240-249 for other networking gear. Or in any other way.
The only important thing is not to assign a static IP address inside the DHCP server address pool. The DHCP server checks whether an IP address is used before it assigns it. If, however, the device with the static IP address inside the DHCP address pool is temporarily down, the DHCP server does not know that the IP address is used otherwise and thus may assign this address to another device. Now, once the device with the static IP address comes up again you have an IP address conflict. Therefore, never assign a static IP address inside the DHCP server address pool. -
I have used PSE forever. Would it be beneficial to switch to PS and LR? What else would I be able to do? etc
You can use the same pictures in any program.
Would it be beneficial to switch to PS and LR?
I think I will answer a question with a different question ... what is it that you want to do now that you can't do in PSE? What parts of PSE are you unhappy with?
Because really the answer to your question is that it is beneficial to some people, and a waste of money for others, and I don't know which category you are in without a lot more information from you on how you use the sofware and what new/additional features you are looking for.
As an alternative, you can download 30-day free trials of Lightroom and Photoshop and see if you like these programs, instead of relying on my judgment. If you are going to do this, please view some tutorial videos on Lightroom, do not skip this step. -
I would like to see two changes
Just to speed things up, first an option to be able to go to the last used Muse site, when starting the application. Second with the go to page once you have selected from the pulldown, then go there without having to press OK!
I aree with you.To tell the truth I much preferred the older Nokia pcsuite.I continually have problems with Ovi Suite.Here is the history of Nokia before Ovi Suite.Regarding the videos,I cant seem to get them for my N86
-
(P.S. Im not very techy!)
Well, it's waiting because you haven't entered a password it recognizes. So if you fix the password problem you will fix the download problem. It's clear that you are not entering the correct password for the account on the phone. Have you verified that the account name is correct? Check in Settings/Store.
Next, in iTunes on your computer click on iTunes Store on the left, then your Apple ID in the upper right. Enter your password here. If it doesn't work here either click the Forgot Password? button. If it does work log in and change your password by clicking the Edit link to the right of your Apple ID, then try the new password on the iPhone. -
I Would Like to get the following issues resolved/Please Help!
I am having the following issues with my Itunes software.
1) A message pops up indicating I cannot burn CDs unless I uninstall and reinstall Itunes.
2) I get the message "The Itunes library file cannot be saved, you do not have enough access to do so".
3) My Ipod will not connect to my Itunes software this is the messsage that pops up:
"An IPod has been detected, but it could not be indentified properly. Please disconnect and reconnect the Ipod, then try again. If the problem persists, uninstall Itunes then install itunes again."
4) An Update keeps popping up about the latest Itunes software being available.
Please note that I have made a big investment in my Itunes library and I do not want to lose or damage it. I am really looking for responses from individuals who have had these problems and resolved them successfully and permanently. Thanks.Please note that I have made a big investment in my Itunes library and I do not want to lose or damage it
So you have made a current backup of this (and all other important files) before doing anything else, correct?
After you make a complete backup, just download and install the latest iTunes.
This will do nothing to your iTunes library or media (the entire /My Music/iTunes/ folder). -
No details necessary. Simple question.
Thanks, Tony. The "General" tab that opened first when I clicked Tools => Options didn't contain that setting, but when I clicked the "General" icon (first icon in the menu bar at the top), I saw your recommended selection.
Nice, simple solution. I'm looking forward to not seeing the downloads window again.
I appreciate your help. -
I would like to downgrade my CC membership from the full version to the Photographers version
I currently have the full CC membership, paying monthly. I am not using any of the other programs other than Lightroom & Photoshop so would like to downgrade to the Photographers version please. There seems to be no way of doing this in my account settings. How can I go about it please? I am based in the UK.
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
And then buy new, since the only change I know of is to go UP in plan
Upgrade single to all Cloud http://forums.adobe.com/thread/1235382 -
I lost music and would like it back
I bought a few albums off of the iTunes Store and they worked great for a while before I had a chance to back the files up. Then my computer crashed and I had to re install Vista on my computer and I no longer have the albums that I purchased. I know that the Zune software(God I hate that program) has a purchase history where you can re-download any media that you have already purchased. Does iTunes have any such feature, I would like the music I paid for back please.
Does iTunes have any such feature
Usually, not without purchasing it again. If you want to try anyway, click here and fill out the form.
(41731) -
ever since firefox updated to version six i am having some issues with games on facebook and also loading several sites. i'm getting a lot of time outs. i would like to go back to firefox 5. please advise
Sorry, Swanarva, It didn't work as it was supposed to. I downloaded, saved file, clicked the download to open, clicked 'run' then got an error message that it couldn't find the file(!) . No idea what happened or why. Should I have uninstalled Firefox first, then downloaded Firefox 8 using another browser or downloaded, uninstalled Firefox 09 beta then tried installing Firefox 8?
At this rate, IE is looking good, despite its shortcomings. -
After recent software upgrade. When I double click home button and pages miniaturist,I now get circular icons of contacts above Messages page. I never used to get this and would like to remove them. Any ideas please ? Thank you in advance
Go to settings> mail, contacts, calendare> show in app switcher> off.
Maybe you are looking for
-
Can't get launchd to work with my applescripts
I am trying to use launchd for the first time and not succeeding. I have several applescripts all of which work when I run them either via the script editor or from Keyboard Maestro. I want to learn to run them directly using launch agents. I created
-
XML-Type and reference to unavailable DTD causes validation problems
Hi, I'm fairly new to Oracle's XML features. I've created a view that produces XML from a number of tables. The resulting XML is used to be stored on a web site for download by customers (this is a manual process about once a week via a CMS). It cont
-
HT5503 has anyone have problems with sending photos in a text
i have the 3g got the update 6 and now cant sent or receive photos in text any help?
-
Method getService is deprecated
Hi, I have made a portal application using EPCF in eclipse for EP60 SP2 but get the following error in the portal: com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component Component : RIGSenderParProjec
-
I own Creative Suite Design Premium CS3 (and all the earlier versions). I downloaded DW CS4 Beta back during the Beta cycle, took it for a whirl and decided against upgrading. I've now received the Design Premium CS3 to CS4 Upgrade as a gift (lucky m