I write binary file (express) but can't read it (express)

Hello,
I have an application where I will acquire data from several sensors. For most of them (16) a relatively low sampling rate (10000Hz) will be fine, but, for one AE sensor I need a high sampling rate (50k - 100kHz). So, I've decided to store the data in binary format so as no to have way too big files.
I try writing the files with the express module, and afterwards, in a new .vi, reading and graphing it to check it, but signals don't match.
By now I'm working with simulated channels, so data stored in the file and read and graphed afterwards should be sine, but I don't see so.
Any suggestions?

Hello,
I have tried my best cleaning up the wiring, but it's still pretty messy. I attach the complete program.
My problem (still not solved) is that since EA needs to be measured at very high rate, I want to write it as binary data. But I cannot make it show me the correct data afterwards, with a different program, that doesn't matter.
I would also like to know how to convert this saved data to MatLab... any suggestions? (should I post this in a new thread?)
Regards,
Usuario
Attachments:
program_00.vi ‏297 KB

Similar Messages

I'm trying to share folder between users on a single mac. I put the folder in "shared," set permissions so other user can read and write, enabled file sharing, but can't find the folder on the second user's account. Any help?

I'm trying to share a folder between users on a single mac. I want both users to be able to read and write so the folder stays current on both accounts. I put the folder in "shared," set permissions on folder so other user can read and write, enabled file sharing, but can't find the folder on the second user's account. Any help?

Did you log out of one account and into the other or just used Fast user switching?
Is the permissions set to anyone?
When you move data to teh Shared folder is it copied or just moved?
If copied then it's not a folder both can access, just a way station like a USB thumb drive that things are coped too and off of likely.
You can run this #5 on each user account to reset the user permissions once they are taken back out of the Shared folder
Step by Step to fix your Mac

My iMac will detect Airport Express but can't read configuration? Any Suggestions?

I bought an Airport Express about 3 weeks ago. I brought it home and set it up no problems. It was replacing an older Netgear router that gave me nothing but IP adress problems. When I bought the Express I didn't realize that DirecTV had wired a connection to my Netgear router, so now I have no way to connect my DirecTV recievers to the internet without purchasing some wifi adapter which I don't want to do. I tried to run the cable from my modem to the Netgear router, than out from the router to the DirecTV box and another to my Aiport Express for wifi. That is where the problems started. I couldn't get anything to connect correctly, ended up switching the express to "Bridge Mode" and it seemed to work. Only I didn't have Internet, though the light was green. I tried restarting everything but to no avail. So, I tried a reset on the Airport Express and now I have nothing. My iMac will detect the Airport Express but when I click continue to configure it simply says "Trying to read Airport Configuration", which eventually leads to an error and nothing. Any idea what my problem could be?

Thanks. I really should have gotten back earlier. Sorry about that.
I have stopped trying to use the Airport Express. I am convinced that it just doesn't work as a device to use for Internet sharing with other computers or iPod Touches that are using Airport. I find that I can easily connect just by turning on Airport and Internet sharing on my iMac and creating a Network. When I do that my iPod connects immediately and I can use all the Internet applications.
But a Time Capsule is in my sights, and I'll use that when they finally roll out.
Griff

Networked Computer Cannot Write to Remote Device, but Can Read and Delete

I am troubleshooting a Mac on OS X 10.4.11 that is having troubling file sharing with a file server also running OS X 10.4.11. The computer cannot write to the file server, but can read files, create blank files, and even delete files.
I have a small network that typically includes 5-7 Macs running various versions of OS X and several Windows PCs of various types. All computers on the network have access to a pair of external drives by way of a networked iMac running OS X 10.4.11 with File Sharing and Windows File Sharing enabled.
One of the Macs on the network (also running 10.4.11) is experiencing assorted permissions issues with one user. When attempting to save files to the external drives or file server desktop via AFP, this user account will receive an error to the effect that they do not have sufficient privileges to do so. However, a stub file will be created on the remote machine (an 8K file of the same name and type, but having no content). The user can read files but not save changes. However, they can delete files. Further, this user receives notices that they do not permission to add files to user drop boxes hosted on the same machine.
Interestingly, when connected via AFP to a machine running 10.5.8, this user can read and write files normally.
A new user account was ceated on the affected machine. This accounts functions normally.
Windows File Sharing is enabled on the affected machine, however disabling seems to have no effect.
Permisisons have been repaired via Disk Utility.
Permissions for all files on external drives have been set to 777.
No other devices or users on network are known to have experienced any problems.

Very strange, long shut, but In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Trying to download Photoshop Elements 9 on to my tablet. I have my S/N. I down loaded the files –PhotoshopElements_9_LS15 – but can not open.

Trying to download Photoshop Elements 9 on to my tablet. I have my S/N. I down loaded the files –PhotoshopElements_9_LS15 – but can not open.

you need both the 7z and exe files. put both in the same directory and click (or double click) the exe.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Why "Outlook Express" users can't read email from Mail.app ?

Why "Outlook Express" users can't read email from Mail.app ? Any explanation ? Select a good format,that's a good explanation,but i can't know each time if our recipients use "Outlook Express".

There are no completely bug free email clients including the Mail.app and Outlook has its share of bugs for such an old/mature email clients and some glaring ones that MS has been aware of for a long time but has chosen not to do anything about since these do not affect exchanging email with other Outlook users.
Outlook has always had problems with Mail's RTF and the degree depending on the Windows and Outlook versions used by the recipient.
Check this link.
http://homepage.mac.com/thgewecke/woutlook.html

In my country Cambodia hav alot of ipad iphone but can not read my language when it not yet jailbreak so it dificault for my country can U put my language for us? thanks for help us

in my country Cambodia hav alot of ipad iphone but can not read my language when it not yet jailbreak so it dificault for my country can U put my language for us? thanks for help us

go to setting>general>keyboard>language
you can also go to keyboards and add a keyboard based on your language

Reading objects from a binary file works but crashes LabVIEW on exit

I've been hunting for the source of some crashes on LabVIEW exit and I was finally able to track it down to this. In my application I wrap measurements into objects that I stream into a binary file during the inspection. In another application I read the file again to browse and analyze the measurements. All this seems to work just fine except that the reading part causes LabVIEW to crash once I close the IDE. Built applications don't report any crashes but I am afraid if it might still cause some instability or unexpected behaviour.
The snippet below represents the writing and reading scheme I use and with which I am able to reproduce the problem every time. I attached the project for testing it.
Parts from the internal warning report:
#OSName: Windows 8.1 Pro N
#AppName: LabVIEW
#Version: 13.0f2 32-bit
DWarn 0xEFBFD9AB: Disposing OMUDClass definition [LinkIdentity "Class 1.lvclass" [ My Computer] even though 1014 inflated data instances still reference it. This will almost certainly cause a crash next time we operate on one of them.
Possible path leak, unable to purge elements of base #0
The full log is also attached.
Notes:
Remember: the reading works without any problems, the crash after LabVIEW exit is what I'm concerned about
Seems to only happen with classes/objects—not the default LabVIEW Object, though
Prepending array size or different byte orders make no difference
The writing is time critical, the reading is not, in case you wish to suggest other options
Has anyone else run into this? Should I be concerned for the built applications or can this be simply ruled as an IDE problem?
Solved!
Go to Solution.
Attachments:
test_project.zip ‏16 KB
lvlog.txt ‏5 KB

Right off, if you say you can read and write lv objects, try casting your object as a lv object before saving it. The lv object is the ultimate parent of all classes.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Mac recognises installer (binary file) as picture - can it be changed?

My friend sent me an installer for an app via email (surprised it came through at all at 21mb). When i download it i get a dialog in firefox saying it is a binary file do i want to save it. Then I go to open it in the finder and i get the warning that it is an application downloaded from the interenet + am i sure I want to download it. When I try to open it (clicking on it) photoshop attempts to run it but fails, with a dialog saying it doesn't recognize the file type. When I do a apple I on the file its says it is plain text. Is there a way i can change it so it will run as supposed to - if i have to get the file again it will be very inonvenient. many thanks in advance.

If your friend is compressing the file before sending it to you... you can either have him not compress it, or you need to be sure that you have/use the correct decompression utility.
Try contacting your friend and ask him what the correct extension for the file is. When you know for sure... Then ensure that the correct one is on the file you downloaded. If it is not change it. The mac will remind you that if you don't put the correct extension on the file it will not work properly... say OK. Now try to open it.

Contacts are there, but can't read anything in it, and can't write either.

Hello,
Contacts are there, but i can't read anything in it, and can't write either.
The place where i should read Name, Family Name, mail adress, phone, etc is EMPTY ! All white ! The card got hos name, but there is nothing in.
I started to use my mac book and adress book too.
I use mac os X since the beginnning, and i never had this problem with it.
Can someone help me please !
Thanks

Sounds like the Font Cache has a corrupt font in it.
Try this:
http://www.ehow.com/how_7197467_rebuild-font-cache.html
If that one doesn't work, it could be the WPF font cache
http://support.microsoft.com/kb/937135
You'll have to delete the .dat files in C:\Windows\ServiceProfiles\LocalService\AppData\Local and restart the computer.

Read and Write Binary File

Hi...
I have a problem. In C programming, if we want to read a file, we can determine to read it as text or binary. There is difference between them. But we still can read it in ASCII mode.
My problem is :
How to do that in Java ? I want to read any file in binary and I hope can read it in ASCII(8 bit) mode.
I need it...
Thanks for your help

Hi,
Check this link
http://saeta.physics.hmc.edu/courses/p170/code/files.html#Java
Gives you an example where you can see how to open a files for input or output in Binary or text mode.
Hope this helps.
Regards,
Roopasri Vittal
Developer Technical Support
Sun Microsystems
http://sun.com/developers/support

ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee. I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
Thanks for your help!

I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

I downloaded pages, completed file sharing but can not open the documents on my ipad

I have pages on my ipad2, I went through the file sharing instructions for 2 files. I can not open them in pages. When I go to Documents, copy from itunes, the files show but cannot be selected.

Quit Pages and restart the iPad and try again.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Make sure that they are compatilbe file extensions on the files or they will not open ... .doc, .docx, .pages

I have Reader 9.3 but can't read pdf files in Elements 8

I have Acrobat Reader 9.3 installed. I installed Elements 8 Standard but can't run its tutorials that are in PDF format. I get a message saying" A sufficient version (8.1 or later) of Adobe Reader is detected but the version of Adobe Reader that is setup to handle PDF content is older than Reader 8.1".
My operating system is Windows 7.
I had Acrobat 5 on my computer. Thinking that this may be causing the problem I unistalled it using Control Panel. But this didn't solve the problem.
I welcome advice.

You probably ruined Reader by removing Acrobat after installing the former. I would start by removing all traces of Acrobat and Reader, and then install the desired version of Reader.

I write binary file (express) but can't read it (express)

Similar Messages

Maybe you are looking for