Iam not getting the document in production order

HI,
Iam created a document (cad drawing)in CV01N and this document is assigned to BOM item category D.
created production order and released .here iam not getting the document overview in production order heade details.
Any setting for document?give me solution

Hi Naresh,
You can view the dms documents at purchase order item level not in header. Hope this will resolve the query.
Regards,
Ravindra

Similar Messages

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Open TRs not getting deleted after TECO production order

Hi,
We're having an issue. We're using WMPP interface to supply the production line for the production orders. The auto TRs are generated when the production orders are released.
After TECO the production orders, the open TRs are not getting deleted automatically.
Could anyone know if these TRs get deleted automatically when we do the TECO production order?
If yes, do we have any restriction or condition based on this, the TRs get deleted?
Please explain.
Thank you.
with regards,
Muthu.

Hi Abhijit,
Thank you for your reply. It does not help me.
The auto TR creation is happening now as required. No issue on this.
When you do the TECO, it also cancels the TRs. I tested this also.
There're some scenario this open TRs cancellation is not happening. I do not know when these open TRs are not cancelled. If you know answer for this, please let me know.
Thank you for your help and time.
with regards,
Muthu.

Not getting the Document name when using CSWB

happy New Year all!
Am using SP Online.
I have inserted the Content Search Web Part on a subsite to pull documents from a main list located on the parent site.
It works ok but the result I am getting is the first line inside the document, so all I get a 10 identical results.
team meeting
team meeting
team meeting
How can I get the actual document name?
Thank you
Pierre
pgg02

Hello Sekar,
I think I figured out the problem but still is strange.  Am trying things but SharePoint Online is extremely slow.
When I created the library list, I only created 2 columns, one called "Name" the other "Tower", other columns got in like automatically and are created by:, modified by, modified date.
I went to edit one of the documents, and that's when I saw a field called "title" which does not appear See below:
Columns
A column stores information about each document in the document library. The following columns are currently available in this document library:
Column (click to edit)
Type
Required
Title
Single line of text
Tower
Choice
Created
Date and Time
Modified
Date and Time
Created By
Person or Group
Modified By
Person or Group
Checked Out To
Person or Group
but in the column ordering screen see
Field Order
Choose the order of the fields by selecting a number for each field under "Position from Top".
Field Name
Position from Top
<input name="numSelects" type="hidden" value="3" />
Name
<select name="FormPosition0" title="Name: Position from Top"><option selected="selected" value="FileLeafRef">1</option> <option value="FileLeafRef">2</option> <option value="FileLeafRef">3</option>
</select>
Title
<select name="FormPosition1" title="Title: Position from Top"><option value="Title">1</option> <option selected="selected" value="Title">2</option> <option value="Title">3</option>
</select>
Tower
<select name="FormPosition2" title="Tower: Position from Top"><option value="Tower">1</option> <option value="Tower">2</option> <option selected="selected" value="Tower">3</option>
</select>
A field called "Name" mysteriously appeared.
The text in the "Name" fields was the same for all items so that explains why I was getting 10 times the same result.
I went back to my list and copied the unique file name (library of word documents) into the "Name" field. But now when I am finally able to try the query I get the same results as before.?!
here is the KQL
path:"https://proposalforcondo.sharepoint.com" (FileExtension:doc OR FileExtension:docx OR FileExtension:xls OR FileExtension:xlsx OR FileExtension:ppt OR FileExtension:pptx OR FileExtension:pdf) (IsDocument:"True"
OR contentclass:"STS_ListItem")
The result I get is:
RelevantResults
                (8)
                    Home.aspx
                        proposalforcondo.sharepoint.com/Home.aspx.docx
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12_MINUTES_Oct 28...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12_MINUTES_July4_...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12_MINUTES_Septem...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12_MINUTES_July31...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12_MINUTES_June17...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12 - MINS_June 25...
                    CARLETON CONDOMINIUM CORPORATION NO. 12
                        proposalforcondo.sharepoint.com/C12 - MINS_June11_...
Any suggestion?
Thanks again
Pierre
pgg02

Not getting Material Costs in Production Order - MTO Scenario

Hi,,
When we are execting MTO Scenario, We are not getting Material costs in Cost analysis of Production Order (Transaction Code CO03).
We have executed cost estiamte. but we are not gettig the material cost.we are getting only Activity price of Labour Hours.
The problem is -
1. we have created Sales order
2. we have Run MRP & Planned order changed as production order
3. But in this production order Costing Relevancy check box was not activated automatically. it is in gray mode and not able change this.
4. Is the problem with SD configuration? Kindly help me in fix this issue.
Note - if we create production order directly - it is showing the Material cost. But only in MTO scenariod it is not giving the material cost.
Kindly help me how to fix this issue.
Thanks
Kishore
Edited by: Emergys Corp on Nov 5, 2009 7:02 AM

In Requirement class (SD Configuration - OVZH)- we have to give valuation & Costing Sheet assignment.
Thanks
Kishore

IN BI 7.0 , Iam not getting the datasources

Hi gurus,
I am finding specific problem, if any of you gone through this problem please guide me
i am new to Bi 7.0, recently we have installed ECC 6 with BI 7.0,
In rsa1 when i am checking the SS( source sys) there is only one self SS is there and not finding any other SS ,s like R/3 , FC,DB,..
When i am trying to create new SS for R/3, in status " no entry for BW_USER in table RSADMIN available'.
with the existing SS i replicated the DS(Datasources) but i unable to find any of the DS what is the problem, all steps related to R/3 is performed like RSA5 .RSA6 and also checked for RSA3 - every thong was OK
Please help me , early reply is appreciable
Thanks
ram kumar

Hi Ram,
Even though u've installed ECC and BI u've build a connection between them inorder to move data from ECC to BI 7.0 through RFC after giving the RFC then u need to create a SS in BI 7.0 sytem for R/3 for doing all these things u need to get SAP_ALL authorization.
First follow the steps to given by our frnd in the below answer to create RFC connection.
then got to RSA1 and create a SS by assigning the respective logical system names and passwords then after creating this SS u should select htis SS and replicate ur datasources..........
Hope it helps........
Regards
Madahvi

Iam getting problem with Jfilechooser iam not getting networkneighbourhood

Dear Sir,
Iam doing a product for education portal for that we are using swing as frontend in that we are using Jfilechooser where ever we want but the problem is in filechooser iam getting the directories of the system(like C, D, E). But iam not getting the networkneighbourhood in that. Please any body can solve my problem i want to select networkneighbouhood. Ill be waiting for your reply.If apiece of code is there ill be very thankful.
regards
surya

Unfortunately can't be done with JFileChooser, you would have to write your own version.
See the bottom of this document
http://java.sun.com/products/jfc/tsc/articles/merlin/windows/index.html
Unfortunately the link that the text then leads you on to is broken.

Not getting Accounting Document during PGI

Hi
IN MTO Scenerio while doing PGI iam not getting Accounting document for Material Document.Valution class for the material is 7920(Finished Goods)
Can Any body help me on this issue.

Go to OMJJ, key in movement type 601 and execute. Again double click on "Account Grouping and ensure the following values are maintained
MTyp::Spl::Val.Upd:::Qty upd:::Mvt::Cns:::Val strg:::Cn:::TEKey:::Acct modif::Chk acct.***
601::::::E::::::X:::::::::::::::X:::::::::::::::::::::::::WA01:::::2::::GBB::::::::::VAX::::::::::X
601::::::E::::::X:::::::::::::::X:::::::::::::::::::::::::WA01:::::3::::PRD::::::::::PRA
601::::::E::::::X::::::::::::::::X::::::L::::::::::::::::WA01:::::2::::GBB::::::::::VAX::::::::::X
601::::::E::::::X::::::::::::::::X::::::L::::::::::::::::WA01:::::3::::PRD::::::::::PRA
601::::::E::::::X::::::::::::::::X:::::::L::::::V:::::::WA01:::::2::::GBB::::::::::VAY::::::::::X
601::::::E::::::X::::::::::::::::X:::::::L::::::V:::::::WA01:::::3::::PRD::::::::::PRA
thanks
G. Lakshmipathi

How to get the document path of the pictures uploaded for products?

Hi Gurus,
How to get the document path of the pictures uploaded for products uploaded through tcode COMMPR01?
Many Thanks,
Neeraj

client path.
I need to get the client path in order to download files form server to client.
Best regards,
Huy.

Can we restrict the partially confirmed production order from getting delet

Dear all,
Can we restrict the partially confirmed production order from getting deleted?
I.e. if the production order is having status PCNF then the deletion flag indicator (status DLFL) should not be allowed to set
SmanS
Edited by: SAP PP Consultant on Feb 4, 2009 6:12 AM

Hi,
Then must be there is change in BS22.Check allowed transaction setting for Status PCNF/CNF .For reference purpose compare it with other client IDES or sand box.
For your reference I have pasted Error log on the same.
Balance of ORD 1000000702 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000000702 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
regards,
Dhaval

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document
link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the
check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe
settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

Hi,
According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
It will be better if you can descript how you
get the check out option as expected when you click on the pdf document in the library.
Then I upload a
word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
I recommend to use the other type docuemts to check whether the check out option works.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

Ah, yes, I'm using Adobe Reader! That makes sense. Thanks so much for your reply. At the moment, I scan Word documents into my computer and they're automatically converted to PDFs. If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?

Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺

Iam not getting the document in production order

Similar Messages

Maybe you are looking for