IAS 6.0 and Rewrite rules
Hi,
I have worked with Apache JServ in which you have the concept of Rewrite
rules in one of the property files.
How does the same concept work with iAS 6.0?
Thanks
Uzma
Based on my (limited) understanding of JServ rewrite rules, rewrite rules
are essentially a regex tool for URL modification that takes place at the
webserver tier before the servlet engine sees the request.
So, you should be able to implement something similar in an NSAPI plug-in at
the webserver tier. Or by using an ISAPI plug-in if you are using IIS, or
mod_rewrite if you are using Apache. (I don't know if anyone has already
implemented such a plug-in in NSAPI or ISAPI). Just make sure that the
re-write plug-in is before the iAS plug-in.
You could try to do something similar with servlet mapping at the iAS tier,
but that route is much more limited. Wildcards as opposed to regular
expresssions. And you ability to map servlets would be limited to URL's that
are already in the context of the webapp.
David
Uzma Siddiqui wrote:
Hi,
I have worked with Apache JServ in which you have the concept of Rewrite
rules in one of the property files.
How does the same concept work with iAS 6.0?
Thanks
Uzma
Similar Messages
-
Virtual hosts and rewrite rule
I've got Oracle portal with several virtual hosts setup.
<VirtualHost *:7778>
ServerName hosta
Port 80
ServerAdmin [email protected]
RewriteEngine On
RewriteOptions inherit
OssoIpCheck off
ErrorLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/hosta_error_log 43200"
CustomLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/hosta_access_log 43200" common
RewriteRule ^/$ /portal/page/portal/bmi/hosta/$1 [PT,L]
</VirtualHost>
<VirtualHost *:7778>
ServerName hostb
Port 80
ServerAdmin [email protected]
RewriteEngine On
RewriteOptions inherit
OssoIpCheck off
ErrorLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/www.jafabu.co.uk_error_log 43200"
CustomLog "|d:\oracle\mid10g\Apache\Apache\bin\rotatelogs logs/www.jafabu.co.uk_access_log 43200" common
RewriteRule ^/?$ /portal/page/portal/pdg/hostb/$1 [PT,L]
</VirtualHost>
This doesn't match any of the pages I have in the two pagegrooups - "HostA" and "HostB".
If I try RewriteRule ^/(..*)$ /portal/page/portal/pdg/hostb/$1 [PT,L], then Portal reports back about there being a problem and promptly dies.
How do I allow http://hosta/ being a different hpome page to http://hostb/ and allow any pages to be referenced without Portal crashing ??? I dont want to add a new rewrite page for avery page my developers add in....
Thanks
KevYou cannot use your virtual hostnames as a page or procedure name. Instead, please try this:
<VirtualHost *:8001>
ServerName hosta.yourdomain.com
# Redirect if on desired VirtualHost:
RewriteEngine on
RewriteCond %{HTTP_HOST} !^hosta\.yourdomain\.com \[NC,OR\]
RewriteCond %{HTTP_HOST} ^yourdomain\.com \[NC\]
RewriteRule ^/(.*) http://hosta.yourdomain.com/portal/page/portal/ \[R\]
</VirtualHost>
<VirtualHost *:8001>
ServerName hostb.yourdomain.com
# Redirect if on desired VirtualHost:
RewriteEngine on
RewriteCond %{HTTP_HOST} !^hosta\.yourdomain\.com \[NC,OR\]
RewriteCond %{HTTP_HOST} ^yourdomain\.com \[NC\]
RewriteRule ^/(.*) http://hostb.yourdomain.com/portal/page/portal/ \[R\]
</VirtualHost>
hope that helps!
AMN -
Rewrite rule and dinamic group
I have put the rewrite rule
domain.com $A$E$F$[email protected]
In Java Enterprise System.
This way, mails send to or from [email protected] are routed to mailhost and that is ok, but when I send a mail to a dinamic group, the message is not sent.
the command imsimta test -rewrite [email protected] reports this at the end:
Address list error -- 5.1.1 unknown or illegal alias: [email protected]
What could be happening?
Thanks,Your original rule is not the best way to go about routing to "domain.com"
I would start by removing that rule.
Then I would look at what you're really trying to do, here.
If you're trying to route mails to users that are in your ldap server, then they should be automatically routed, based on the value of "mailhost" you're put in for them.
If you're trying to route users that are not in your ldap, then you need to create a
domain smarthost
documentation in our provisioning guide, here:
http://docs.sun.com/source/816-6018-10/domains.htm#29147
Using rewrite rules for routing outside the MTA is a Bad Idea, as you've found. -
Problem With httpd.conf and mod_rewrite rules Apache 2.2
I have some RewriteRules that are working on my Leopard Client Apache 2.2 machine - but when I try to implement them on Leopard Server Apache 2.2, they don't work. I don't get any errors, they just won't execute.
Could somebody with Leopard Server help me out using the below info?
Here are the rules I am trying to add: (below is the httpd.conf file)
======RULES========
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
# Remove ".php"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]
# Remove ".asp"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]
# Remove ".aspx"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]
# Remove ".htm" and ".html"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]
# Remove ".cfm"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]
# Remove ".bak"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]
# Remove ".inc"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]
# Remove ".*"
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]
=====RULES============
=========HTTPD.CONF=============
#### Default httpd.conf for Mac OS X Server, Apache 2.2
#### This httpd.conf differs from the httpd.conf distributed
#### with Apache and the httpd.conf present on Mac OS X.
#### Feel free to edit this; the Server Admin app also edits this file but will
#### respect your changes unless noted below. See also ReadMe.txt.
## ServerRoot: The top of the directory tree under which the server's
## configuration, error, and log files are kept.
## NOTE! If you intend to place this on an NFS (or otherwise network)
## mounted filesystem then please read the LockFile documentation
## (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
## you will save yourself a lot of trouble.
## Do NOT add a slash at the end of the directory path.
ServerRoot "/usr"
## PidFile: The file in which the server should record its process
## identification number when it starts.
PidFile /var/run/httpd.pid
## ScoreBoardFile: File used to store internal server process information.
## Not all architectures require this. But if yours does (you'll know because
## this file will be created when you run Apache) then you must ensure that
## no two invocations of Apache share the same scoreboard file.
#ScoreBoardFile "/var/run/apache2runtimestatus"
## Server-pool size regulation. Rather than making you guess how many
## server processes you need, Apache dynamically adapts to the load it
## sees --- that is, it tries to maintain enough server processes to
## handle the current load, plus a few spare servers to handle transient
## load spikes (e.g., multiple simultaneous requests from a single
## Netscape browser).
## It does this by periodically checking how many servers are waiting
## for a request. If there are fewer than MinSpareServers, it creates
## a new spare. If there are more than MaxSpareServers, some of the
## spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 1
## Number of servers to start initially --- should be a reasonable ballpark
## figure.
StartServers 1
## MaxRequestsPerChild: the number of requests each child process is
## allowed to process before the child dies. The child will exit so
## as to avoid problems after prolonged use when Apache (and maybe the
## libraries it uses) leak memory or other resources. On most systems, this
## isn't really needed, but a few (such as Solaris) do have notable leaks
## in the libraries. For these platforms, set to something like 10000
## or so; a setting of 0 means unlimited.
## NOTE: This value does not include keepalive requests after the initial
## request per connection. For example, if a child process handles
## an initial request and 10 subsequent "keptalive" requests, it
## would only count as 1 request towards this limit.
MaxRequestsPerChild 100000
## Dynamic Shared Object (DSO) Support
## To be able to use the functionality of a module which was built as a DSO you
## have to place corresponding `LoadModule' lines at this location so the
## directives contained in it are actually available before they are used.
## Please read the file http://httpd.apache.org/docs/dso.html for more
## details about the DSO mechanism and run `httpd -l' for the list of already
## built-in (statically linked and thus always available) modules in your httpd
## binary.
## Note: The order in which modules are loaded is important. Don't change
## the order below without expert advice.
## Example:
## LoadModule foo_module libexec/mod_foo.so
#### For Mac OS X Server: Note that the Server Admin application
#### and the apxs utility enable and disable modules
#### by removing and adding a comment character.
LoadModule authnfilemodule libexec/apache2/modauthnfile.so
#LoadModule authndbmmodule libexec/apache2/modauthndbm.so
#LoadModule authnanonmodule libexec/apache2/modauthnanon.so
#LoadModule authndbdmodule libexec/apache2/modauthndbd.so
#LoadModule authndefaultmodule libexec/apache2/modauthndefault.so
LoadModule authzhostmodule libexec/apache2/modauthzhost.so
#LoadModule authzgroupfilemodule libexec/apache2/modauthzgroupfile.so
#LoadModule authzusermodule libexec/apache2/modauthzuser.so
#LoadModule authzdbmmodule libexec/apache2/modauthzdbm.so
#LoadModule authzownermodule libexec/apache2/modauthzowner.so
#LoadModule authzdefaultmodule libexec/apache2/modauthzdefault.so
#LoadModule authbasicmodule libexec/apache2/modauthbasic.so
#LoadModule authdigest_applemodule libexec/apache2/modauth_digestapple.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule memcachemodule libexec/apache2/modmemcache.so
LoadModule diskcachemodule libexec/apache2/moddiskcache.so
#LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule extfiltermodule libexec/apache2/modextfilter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule logconfigmodule libexec/apache2/modlogconfig.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
#LoadModule proxyconnectmodule libexec/apache2/modproxyconnect.so
#LoadModule proxyftpmodule libexec/apache2/modproxyftp.so
LoadModule proxyhttpmodule libexec/apache2/modproxyhttp.so
#LoadModule proxyajpmodule libexec/apache2/modproxyajp.so
LoadModule proxybalancermodule libexec/apache2/modproxybalancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
#LoadModule mimemagicmodule libexec/apache2/modmimemagic.so
#LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
#LoadModule davfsmodule libexec/apache2/moddavfs.so
LoadModule vhostaliasmodule libexec/apache2/modvhostalias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule php5_module libexec/apache2/libphp5.so
#LoadModule encoding_module libexec/apache2/mod_encoding.so
#LoadModule jk_module libexec/apache2/mod_jk.so
#LoadModule applespotlightmodule libexec/apache2/modspotlightapple.so
#LoadModule bonjour_module libexec/apache2/mod_bonjour.so
LoadModule appleauthmodule libexec/apache2/modauthapple.so
LoadModule spnegoauthmodule libexec/apache2/modspnegoapple.so
LoadModule appledigestmodule libexec/apache2/moddigestapple.so
LoadModule hfsapplemodule libexec/apache2/modhfsapple.so
#LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so
#LoadModule scgipubsubmodule libexec/apache2/modscgipubsub.so
#LoadModule davsvnmodule libexec/apache2/moddavsvn.so
#LoadModule authzsvnmodule libexec/apache2/modauthzsvn.so
## If you wish httpd to run as a different user or group, you must run
## httpd as root initially and it will switch.
## User/Group: The name (or #number) of the user/group to run httpd as.
## It is usually good practice to create a dedicated user and group for
## running httpd, as with most system services.
User www
Group www
## Each directory to which Apache has access, can be configured with respect
## to which services and features are allowed and/or disabled in that
## directory (and its subdirectories).
## First, we configure the "default" to be a very restrictive set of
## features.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
## UserDir: The name of the directory which is appended onto a user's home
## directory if a ~user request is received.
#### For Mac OS X Server: Note that
#### personal websharing is not supported on Mac OS X Server.
<IfModule mod_userdir.c>
UserDir Sites
</IfModule>
## AccessFileName: The name of the file to look for in each directory
## for access control information.
AccessFileName .htaccess
## The following lines prevent .htaccess files from being viewed by
## Web clients.
#### For Mac OS X Server: Note the case-insensitive pattern, which protects
#### .htaccess fils on HFS volumes.
#### (Note: Denying .DS_S* may interfere with Finder WebDAV operation)
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
#### Block attempts to circumvent access controls by requesting forks.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</DirectoryMatch>
## DefaultType is the default MIME type the server will use for a document
## if it cannot otherwise determine one, such as from filename extensions.
## If your server contains mostly text or HTML documents, "text/plain" is
## a good value. If most of your content is binary, such as applications
## or images, you may want to use "application/octet-stream" instead to
## keep browsers from trying to display binary files as though they are
## text.
DefaultType text/plain
<IfModule mod_mime.c>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig /dev/null
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddOutputFilter INCLUDES .shtml
## Although mod_mime may support several extensions following a single
## mime type (ex: "AddType video/quicktime qt mov"), the parser used
## by the Server Admin application expects only one extension per line.
AddHandler send-as-is asis
AddHandler cgi-script cgi
AddHandler fastcgi-script fcgi
AddHandler imap-file map
AddHandler server-parsed shtml
AddHandler type-map var
AddHandler spotlight-search spotlight
AddType application/andrew-inset ez
AddType application/atom+xml atom
AddType application/atomcat+xml atomcat
AddType application/atomsvc+xml atomsvc
AddType application/ccxml+xml ccxml
AddType application/davmount+xml davmount
AddType application/ecmascript ecma
AddType application/font-tdpfr pfr
AddType application/hyperstudio stk
AddType application/javascript js
AddType application/json json
AddType application/mac-binhex40 hqx
AddType application/mac-compactpro cpt
AddType application/marc mrc
AddType application/mathematica ma
AddType application/mathematica mb
AddType application/mathematica nb
AddType application/mathml+xml mathml
AddType application/mbox mbox
AddType application/mediaservercontrol+xml mscml
AddType application/mp4 mp4s
AddType application/msword doc
AddType application/msword dot
AddType application/mxf mxf
AddType application/octet-stream bin
AddType application/octet-stream bpk
AddType application/octet-stream class
AddType application/octet-stream dist
AddType application/octet-stream distz
AddType application/octet-stream dmg
AddType application/octet-stream dms
AddType application/octet-stream dump
AddType application/octet-stream elc
AddType application/octet-stream iso
AddType application/octet-stream lha
AddType application/octet-stream lzh
AddType application/octet-stream scpt
AddType application/octet-stream so
AddType application/oda oda
AddType application/ogg ogg
AddType application/pdf pdf
AddType application/pgp-encrypted pgp
AddType application/pgp-signature asc
AddType application/pgp-signature sig
AddType application/pics-rules prf
AddType application/pkcs10 p10
AddType application/pkcs7-mime p7c
AddType application/pkcs7-mime p7m
AddType application/pkcs7-signature p7s
AddType application/pkix-cert cer
AddType application/pkix-crl crl
AddType application/pkix-pkipath pkipath
AddType application/pkixcmp pki
AddType application/pls+xml pls
AddType application/postscript ai
AddType application/postscript eps
AddType application/postscript ps
AddType application/prs.cww cww
AddType application/rdf+xml rdf
AddType application/reginfo+xml rif
AddType application/relax-ng-compact-syntax rnc
AddType application/resource-lists+xml rl
AddType application/rls-services+xml rs
AddType application/rsd+xml rsd
AddType application/rss+xml rss
AddType application/rtf rtf
AddType application/sbml+xml sbml
AddType application/sdp sdp
AddType application/set-payment-initiation setpay
AddType application/set-registration-initiation setreg
AddType application/shf+xml shf
AddType application/smil+xml smi
AddType application/smil+xml smil
AddType application/srgs gram
AddType application/srgs+xml grxml
AddType application/ssml+xml ssml
AddType application/vnd.3gpp.pic-bw-large plb
AddType application/vnd.3gpp.pic-bw-small psb
AddType application/vnd.3gpp.pic-bw-var pvb
AddType application/vnd.3m.post-it-notes pwn
AddType application/vnd.accpac.simply.aso aso
AddType application/vnd.accpac.simply.imp imp
AddType application/vnd.acucobol acu
AddType application/vnd.acucorp acutc
AddType application/vnd.acucorp atc
AddType application/vnd.adobe.xdp+xml xdp
AddType application/vnd.adobe.xfdf xfdf
AddType application/vnd.amiga.ami ami
AddType application/vnd.anser-web-certificate-issue-initiation cii
AddType application/vnd.anser-web-funds-transfer-initiation fti
AddType application/vnd.antix.game-component atx
AddType application/vnd.apple.installer+xml mpkg
AddType application/vnd.apple.installer+xml pkg
AddType application/vnd.audiograph aep
AddType application/vnd.blueice.multipass mpm
AddType application/vnd.bmi bmi
AddType application/vnd.businessobjects rep
AddType application/vnd.chemdraw+xml cdxml
AddType application/vnd.chipnuts.karaoke-mmd mmd
AddType application/vnd.cinderella cdy
AddType application/vnd.claymore cla
AddType application/vnd.clonk.c4group c4d
AddType application/vnd.clonk.c4group c4f
AddType application/vnd.clonk.c4group c4g
AddType application/vnd.clonk.c4group c4p
AddType application/vnd.clonk.c4group c4u
AddType application/vnd.commonspace csp
AddType application/vnd.commonspace cst
AddType application/vnd.contact.cmsg cdbcmsg
AddType application/vnd.cosmocaller cmc
AddType application/vnd.crick.clicker clkx
AddType application/vnd.crick.clicker.keyboard clkk
AddType application/vnd.crick.clicker.palette clkp
AddType application/vnd.crick.clicker.template clkt
AddType application/vnd.crick.clicker.wordbank clkw
AddType application/vnd.criticaltools.wbs+xml wbs
AddType application/vnd.ctc-posml pml
AddType application/vnd.cups-ppd ppd
AddType application/vnd.curl curl
AddType application/vnd.data-vision.rdz rdz
AddType application/vnd.denovo.fcselayout-link fe_launch
AddType application/vnd.dna dna
AddType application/vnd.dolby.mlp mlp
AddType application/vnd.dpgraph dpg
AddType application/vnd.dreamfactory dfac
AddType application/vnd.ecowin.chart mag
AddType application/vnd.enliven nml
AddType application/vnd.epson.esf esf
AddType application/vnd.epson.msf msf
AddType application/vnd.epson.quickanime qam
AddType application/vnd.epson.salt slt
AddType application/vnd.epson.ssf ssf
AddType application/vnd.eszigno3+xml es3 et3
AddType application/vnd.ezpix-album ez2
AddType application/vnd.ezpix-package ez3
AddType application/vnd.fdf fdf
AddType application/vnd.flographit gph
AddType application/vnd.fluxtime.clip ftc
AddType application/vnd.framemaker fm
AddType application/vnd.framemaker frame
AddType application/vnd.framemaker maker
AddType application/vnd.frogans.fnc fnc
AddType application/vnd.frogans.ltf ltf
AddType application/vnd.fsc.weblaunch fsc
AddType application/vnd.fujitsu.oasys oas
AddType application/vnd.fujitsu.oasys2 oa2
AddType application/vnd.fujitsu.oasys3 oa3
AddType application/vnd.fujitsu.oasysgp fg5
AddType application/vnd.fujitsu.oasysprs bh2
AddType application/vnd.fujixerox.ddd ddd
AddType application/vnd.fujixerox.docuworks xdw
AddType application/vnd.fujixerox.docuworks.binder xbd
AddType application/vnd.fuzzysheet fzs
AddType application/vnd.genomatix.tuxedo txd
AddType application/vnd.google-earth.kml+xml kml
AddType application/vnd.google-earth.kmz kmz
AddType application/vnd.grafeq gqf
AddType application/vnd.grafeq gqs
AddType application/vnd.groove-account gac
AddType application/vnd.groove-help ghf
AddType application/vnd.groove-identity-message gim
AddType application/vnd.groove-injector grv
AddType application/vnd.groove-tool-message gtm
AddType application/vnd.groove-tool-template tpl
AddType application/vnd.groove-vcard vcg
AddType application/vnd.handheld-entertainment+xml zmm
AddType application/vnd.hbci hbci
AddType application/vnd.hhe.lesson-player les
AddType application/vnd.hp-hpgl hpgl
AddType application/vnd.hp-hpid hpid
AddType application/vnd.hp-hps hps
AddType application/vnd.hp-jlyt jlt
AddType application/vnd.hp-pcl pcl
AddType application/vnd.hp-pclxl pclxl
AddType application/vnd.hzn-3d-crossword x3d
AddType application/vnd.ibm.minipay mpy
AddType application/vnd.ibm.modcap afp
AddType application/vnd.ibm.modcap list3820
AddType application/vnd.ibm.modcap listafp
AddType application/vnd.ibm.rights-management irm
AddType application/vnd.ibm.secure-container sc
AddType application/vnd.igloader igl
AddType application/vnd.immervision-ivp ivp
AddType application/vnd.immervision-ivu ivu
AddType application/vnd.intercon.formnet xpw
AddType application/vnd.intercon.formnet xpx
AddType application/vnd.intu.qbo qbo
AddType application/vnd.intu.qfx qfx
AddType application/vnd.ipunplugged.rcprofile rcprofile
AddType application/vnd.irepository.package+xml irp
AddType application/vnd.is-xpr xpr
AddType application/vnd.jam jam
AddType application/vnd.jcp.javame.midlet-rms rms
AddType application/vnd.jisp jisp
AddType application/vnd.kahootz ktr
AddType application/vnd.kahootz ktz
AddType application/vnd.kde.karbon karbon
AddType application/vnd.kde.kchart chrt
AddType application/vnd.kde.kformula kfo
AddType application/vnd.kde.kivio flw
AddType application/vnd.kde.kontour kon
AddType application/vnd.kde.kpresenter kpr
AddType application/vnd.kde.kpresenter kpt
AddType application/vnd.kde.kspread ksp
AddType application/vnd.kde.kword kwd
AddType application/vnd.kde.kword kwt
AddType application/vnd.kenameaapp htke
AddType application/vnd.kidspiration kia
AddType application/vnd.kinar kne
AddType application/vnd.kinar knp
AddType application/vnd.koan skd
AddType application/vnd.koan skm
AddType application/vnd.koan skp
AddType application/vnd.koan skt
AddType application/vnd.llamagraphics.life-balance.desktop lbd
AddType application/vnd.llamagraphics.life-balance.exchange+xml lbe
AddType application/vnd.lotus-1-2-3 123
AddType application/vnd.lotus-approach apr
AddType application/vnd.lotus-freelance pre
AddType application/vnd.lotus-notes nsf
AddType application/vnd.lotus-organizer org
AddType application/vnd.lotus-screencam scm
AddType application/vnd.lotus-wordpro lwp
AddType application/vnd.macports.portpkg portpkg
AddType application/vnd.mcd mcd
AddType application/vnd.medcalcdata mc1
AddType application/vnd.mediastation.cdkey cdkey
AddType application/vnd.mfer mwf
AddType application/vnd.mfmp mfm
AddType application/vnd.micrografx.flo flo
AddType application/vnd.micrografx.igx igx
AddType application/vnd.mif mif
AddType application/vnd.mobius.daf daf
AddType application/vnd.mobius.dis dis
AddType application/vnd.mobius.mbk mbk
AddType application/vnd.mobius.mqy mqy
AddType application/vnd.mobius.msl msl
AddType application/vnd.mobius.plc plc
AddType application/vnd.mobius.txf txf
AddType application/vnd.mophun.application mpn
AddType application/vnd.mophun.certificate mpc
AddType application/vnd.mozilla.xul+xml xul
AddType application/vnd.ms-artgalry cil
AddType application/vnd.ms-asf asf
AddType application/vnd.ms-cab-compressed cab
AddType application/vnd.ms-excel xla
AddType application/vnd.ms-excel xlc
AddType application/vnd.ms-excel xlm
AddType application/vnd.ms-excel xls
AddType application/vnd.ms-excel xlt
AddType application/vnd.ms-excel xlw
AddType application/vnd.ms-fontobject eot
AddType application/vnd.ms-htmlhelp chm
AddType application/vnd.ms-ims ims
AddType application/vnd.ms-lrm lrm
AddType application/vnd.ms-powerpoint pot
AddType application/vnd.ms-powerpoint pps
AddType application/vnd.ms-powerpoint ppt
AddType application/vnd.ms-project mpp
AddType application/vnd.ms-project mpt
AddType application/vnd.ms-works wcm
AddType application/vnd.ms-works wdb
AddType application/vnd.ms-works wks
AddType application/vnd.ms-works wps
AddType application/vnd.ms-wpl wpl
AddType application/vnd.ms-xpsdocument xps
AddType application/vnd.mseq mseq
AddType application/vnd.musician mus
AddType application/vnd.neurolanguage.nlu nlu
AddType application/vnd.noblenet-directory nnd
AddType application/vnd.noblenet-sealer nns
AddType application/vnd.noblenet-web nnw
AddType application/vnd.nokia.n-gage.data ngdat
AddType application/vnd.nokia.n-gage.symbian.install n-gage
AddType application/vnd.nokia.radio-preset rpst
AddType application/vnd.nokia.radio-presets rpss
AddType application/vnd.novadigm.edm edm
AddType application/vnd.novadigm.edx edx
AddType application/vnd.novadigm.ext ext
AddType application/vnd.oasis.opendocument.chart odc
AddType application/vnd.oasis.opendocument.chart-template otc
AddType application/vnd.oasis.opendocument.formula odf
AddType application/vnd.oasis.opendocument.formula-template otf
AddType application/vnd.oasis.opendocument.graphics odg
AddType application/vnd.oasis.opendocument.graphics-template otg
AddType application/vnd.oasis.opendocument.image odi
AddType application/vnd.oasis.opendocument.image-template oti
AddType application/vnd.oasis.opendocument.presentation odp
AddType application/vnd.oasis.opendocument.presentation-template otp
AddType application/vnd.oasis.opendocument.spreadsheet ods
AddType application/vnd.oasis.opendocument.spreadsheet-template ots
AddType application/vnd.oasis.opendocument.text odt
AddType application/vnd.oasis.opendocument.text-master otm
AddType application/vnd.oasis.opendocument.text-template ott
AddType application/vnd.oasis.opendocument.text-web oth
AddType application/vnd.olpc-sugar xo
AddType application/vnd.oma.dd2+xml dd2
AddType application/vnd.openofficeorg.extension oxt
AddType application/vnd.osgi.dp dp
AddType application/vnd.palm oprc
AddType application/vnd.palm pdb
AddType application/vnd.palm pqa
AddType application/vnd.palm prc
AddType application/vnd.pg.format str
AddType application/vnd.pg.osasli ei6
AddType application/vnd.picsel efif
AddType application/vnd.pocketlearn plf
AddType application/vnd.powerbuilder6 pbd
AddType application/vnd.previewsystems.box box
AddType application/vnd.proteus.magazine mgz
AddType application/vnd.publishare-delta-tree qps
AddType application/vnd.pvi.ptid1 ptid
AddType application/vnd.quark.quarkxpress qwd
AddType application/vnd.quark.quarkxpress qwt
AddType application/vnd.quark.quarkxpress qxb
AddType application/vnd.quark.quarkxpress qxd
AddType application/vnd.quark.quarkxpress qxl
AddType application/vnd.quark.quarkxpress qxt
AddType application/vnd.recordare.musicxml mxl
# AddType application/vnd.rn-realmedia rm
AddType application/vnd.seemail see
AddType application/vnd.sema sema
AddType application/vnd.semd semd
AddType application/vnd.semf semf
AddType application/vnd.shana.informed.formdata ifm
AddType application/vnd.shana.informed.formtemplate itp
AddType application/vnd.shana.informed.interchange iif
AddType application/vnd.shana.informed.package ipk
AddType application/vnd.simtech-mindmapper twd
AddType application/vnd.simtech-mindmapper twds
AddType application/vnd.smaf mmf
AddType application/vnd.solent.sdkm+xml sdkd
AddType application/vnd.solent.sdkm+xml sdkm
AddType application/vnd.spotfire.dxp dxp
AddType application/vnd.spotfire.sfs sfs
AddType application/vnd.sus-calendar sus
AddType application/vnd.sus-calendar susp
AddType application/vnd.svd svd
AddType application/vnd.syncml+xml xsm
AddType application/vnd.syncml.dm+wbxml bdm
AddType application/vnd.syncml.dm+xml xdm
AddType application/vnd.tao.intent-module-archive tao
AddType application/vnd.tmobile-livetv tmo
AddType application/vnd.trid.tpt tpt
AddType application/vnd.triscape.mxs mxs
AddType application/vnd.trueapp tra
AddType application/vnd.ufdl ufd
AddType application/vnd.ufdl ufdl
AddType application/vnd.uiq.theme utz
AddType application/vnd.umajin umj
AddType application/vnd.unity unityweb
AddType application/vnd.uoml+xml uoml
AddType application/vnd.vcx vcx
AddType application/vnd.visio vsd
AddType application/vnd.visio vss
AddType application/vnd.visio vst
AddType application/vnd.visio vsw
AddType application/vnd.visionary vis
AddType application/vnd.vsf vsf
AddType application/vnd.wap.wbxml wbxml
AddType application/vnd.wap.wmlc wmlc
AddType application/vnd.wap.wmlscriptc wmlsc
AddType application/vnd.webturbo wtb
AddType application/vnd.wordperfect wpd
AddType application/vnd.wqd wqd
AddType application/vnd.wt.stf stf
AddType application/vnd.xara xar
AddType application/vnd.xfdl xfdl
AddType application/vnd.yamaha.hv-dic hvd
AddType application/vnd.yamaha.hv-script hvs
AddType application/vnd.yamaha.hv-voice hvp
AddType application/vnd.yamaha.smaf-audio saf
AddType application/vnd.yamaha.smaf-phrase spf
AddType application/vnd.yellowriver-custom-menu cmp
AddType application/vnd.zzazz.deck+xml zaz
AddType application/voicexml+xml vxml
AddType application/winhlp hlp
AddType application/wsdl+xml wsdl
AddType application/wspolicy+xml wspolicy
AddType application/x-ace-compressed ace
AddType application/x-bcpio bcpio
AddType application/x-bittorrent torrent
AddType application/x-bzip bz
AddType application/x-bzip2 boz
AddType application/x-bzip2 bz2
AddType application/x-cdlink vcd
AddType application/x-chat chat
AddType application/x-chess-pgn pgn
AddType application/x-cpio cpio
AddType application/x-csh csh
AddType application/x-director dcr
AddType application/x-director dir
AddType application/x-director dxr
AddType application/x-director fgd
AddType application/x-dvi dvi
AddType application/x-futuresplash spl
AddType application/x-gtar gtar
AddType application/x-hdf hdf
AddType application/x-httpd-php php
AddType application/x-httpd-php-source phps
AddType application/x-httpd-php3 php3
AddType application/x-java-jnlp-file jnlp
AddType application/x-latex latex
AddType application/x-ms-wmd wmd
AddType application/x-ms-wmz wmz
AddType application/x-msaccess mdb
AddType application/x-msbinder obd
AddType application/x-mscardfile crd
AddType application/x-msclip clp
AddType application/x-msdownload bat
AddType application/x-msdownload com
AddType application/x-msdownload dll
AddType application/x-msdownload exe
AddType application/x-msdownload msi
AddType application/x-msmediaview m13
AddType application/x-msmediaview m14
AddType application/x-msmediaview mvb
AddType application/x-msmetafile wmf
AddType application/x-msmoney mny
AddType application/x-mspublisher pub
AddType application/x-msschedule scd
AddType application/x-msterminal trm
AddType application/x-mswrite wri
AddType application/x-netcdf cdf
AddType application/x-netcdf nc
AddType application/x-pkcs12 p12
AddType application/x-pkcs12 pfx
AddType application/x-pkcs7-certificates p7b
AddType application/x-pkcs7-certificates spc
AddType application/x-pkcs7-certreqresp p7r
AddType application/x-quicktimeplayer qtl
AddType application/x-rar-compressed rar
AddType application/x-sh sh
AddType application/x-shar shar
AddType application/x-shockwave-flash swf
AddType application/x-stuffit sit
AddType application/x-stuffitx sitx
AddType application/x-sv4cpio sv4cpio
AddType application/x-sv4crc sv4crc
AddType application/x-tar tar
AddType application/x-tar tgz
AddType application/x-tcl tcl
AddType application/x-tex tex
AddType application/x-texinfo texi
AddType application/x-texinfo texinfo
AddType application/x-ustar ustar
AddType application/x-wais-source src
AddType application/x-x509-ca-cert crt
AddType application/x-x509-ca-cert der
AddType application/xenc+xml xenc
AddType application/xhtml+xml xht
AddType application/xhtml+xml xhtm
AddType application/xhtml+xml xhtml
AddType application/xml xml
AddType application/xml xsl
AddType application/xml-dtd dtd
AddType application/xop+xml xop
AddType application/xslt+xml xslt
AddType application/xspf+xml xspf
AddType application/xv+xml mxml
AddType application/xv+xml xhvml
AddType application/xv+xml xvm
AddType application/xv+xml xvml
AddType application/zip zip
AddType audio/basic au
AddType audio/basic snd
AddType audio/midi kar
AddType audio/midi mid
AddType audio/midi midi
AddType audio/midi rmi
AddType audio/mp4 mp4a
AddType audio/mp4a-latm m4a
AddType audio/mp4a-latm m4p
AddType audio/mpeg m2a
AddType audio/mpeg m3a
AddType audio/mpeg mp2
AddType audio/mpeg mp2a
AddType audio/mpeg mp3
AddType audio/mpeg mpga
AddType audio/vnd.digital-winds eol
AddType audio/vnd.lucent.voice lvp
AddType audio/vnd.nuera.ecelp4800 ecelp4800
AddType audio/vnd.nuera.ecelp7470 ecelp7470
AddType audio/vnd.nuera.ecelp9600 ecelp9600
AddType audio/wav wav
AddType audio/x-aiff aif
AddType audio/x-aiff aifc
AddType audio/x-aiff aiff
AddType audio/x-m4a m4a
AddType audio/x-mpegurl m3u
AddType audio/x-ms-wax wax
AddType audio/x-ms-wma wma
AddType audio/x-pn-realaudio ra
AddType audio/x-pn-realaudio ram
AddType audio/x-pn-realaudio rm
AddType audio/x-pn-realaudio-plugin rmp
AddType audio/x-scpls pls
AddType audio/x-wav wav
AddType chemical/x-cdx cdx
AddType chemical/x-cif cif
AddType chemical/x-cmdf cmdf
AddType chemical/x-cml cml
AddType chemical/x-csml csml
AddType chemical/x-pdb pdb
AddType chemical/x-xyz xyz
AddType image/bmp bmp
AddType image/cgm cgm
AddType image/g3fax g3
AddType image/gif gif
AddType image/ief ief
AddType image/jp2 jp2
AddType image/jpeg jpe
AddType image/jpeg jpeg
AddType image/jpeg jpg
AddType image/pict pct
AddType image/pict pic
AddType image/pict pict
AddType image/png png
AddType image/prs.btif btif
AddType image/svg+xml svg
AddType image/svg+xml svgz
AddType image/tiff tif
AddType image/tiff tiff
AddType image/vnd.adobe.photoshop psd
AddType image/vnd.djvu djv
AddType image/vnd.djvu djvu
AddType image/vnd.dwg dwg
AddType image/vnd.dxf dxf
AddType image/vnd.fastbidsheet fbs
AddType image/vnd.fpx fpx
AddType image/vnd.fst fst
AddType image/vnd.fujixerox.edmics-mmr mmr
AddType image/vnd.fujixerox.edmics-rlc rlc
AddType image/vnd.microsoft.icon ico
AddType image/vnd.ms-modi mdi
AddType image/vnd.net-fpx npx
AddType image/vnd.wap.wbmp wbmp
AddType image/vnd.xiff xif
AddType image/x-cmu-raster ras
AddType image/x-cmx cmx
AddType image/x-macpaint mac
AddType image/x-macpaint pnt
AddType image/x-macpaint pntg
AddType image/x-pcx pcx
AddType image/x-pict pct
AddType image/x-pict pic
AddType image/x-portable-anymap pnm
AddType image/x-portable-bitmap pbm
AddType image/x-portable-graymap pgm
AddType image/x-portable-pixmap ppm
AddType image/x-quicktime qti
AddType image/x-quicktime qtif
AddType image/x-rgb rgb
AddType image/x-xbitmap xbm
AddType image/x-xpixmap xpm
AddType image/x-xwindowdump xwd
AddType message/rfc822 eml
AddType message/rfc822 mime
AddType model/iges iges
AddType model/iges igs
AddType model/mesh mesh
AddType model/mesh msh
AddType model/mesh silo
AddType model/vnd.dwf dwf
AddType model/vnd.gdl gdl
AddType model/vnd.gtw gtw
AddType model/vnd.mts mts
AddType model/vnd.vtu vtu
AddType model/vrml vrml
AddType model/vrml wrl
AddType text/calendar ics
AddType text/calendar ifb
AddType text/css css
AddType text/csv csv
AddType text/html htm
AddType text/html html
AddType text/html shtml
AddType text/plain asc
AddType text/plain conf
AddType text/plain def
AddType text/plain in
AddType text/plain list
AddType text/plain log
AddType text/plain text
AddType text/plain txt
AddType text/prs.lines.tag dsc
AddType text/richtext rtx
AddType text/rtf rtf
AddType text/sgml sgm
AddType text/sgml sgml
AddType text/tab-separated-values tsv
AddType text/troff man
AddType text/troff me
AddType text/troff ms
AddType text/troff roff
AddType text/troff t
AddType text/troff tr
AddType text/uri-list uri
AddType text/uri-list uris
AddType text/uri-list urls
AddType text/vnd.fly fly
AddType text/vnd.fmi.flexstor flx
AddType text/vnd.in3d.3dml 3dml
AddType text/vnd.in3d.spot spot
AddType text/vnd.sun.j2me.app-descriptor jad
AddType text/vnd.wap.wml wml
AddType text/vnd.wap.wmlscript wmls
AddType text/x-asm s
AddType text/x-asm sm
AddType text/x-c c
AddType text/x-c cc
AddType text/x-c cpp
AddType text/x-c cxx
AddType text/x-c dic
AddType text/x-c h
AddType text/x-c hh
AddType text/x-fortran f
AddType text/x-fortran f77
AddType text/x-fortran f90
AddType text/x-fortran for
AddType text/x-java-source java
AddType text/x-pascal p
AddType text/x-pascal pas
AddType text/x-setext etx
AddType text/x-uuencode uu
AddType text/x-vcalendar vcs
AddType text/x-vcard vcf
AddType video/3gp2 3gp2
AddType video/3gpp 3gp
AddType video/3gpp 3gpp
AddType video/3gpp2 3g2
AddType video/h261 h261
AddType video/h263 h263
AddType video/h264 h264
AddType video/jpeg jpgv
AddType video/jpm jpgm
AddType video/jpm jpm
AddType video/mj2 mj2
AddType video/mj2 mjp2
AddType video/mp4 m4v
AddType video/mp4 mp4
AddType video/mp4 mp4v
AddType video/mp4 mpg4
AddType video/mpeg m1v
AddType video/mpeg m2v
AddType video/mpeg mpe
AddType video/mpeg mpeg
AddType video/mpeg mpg
AddType video/quicktime mov
AddType video/quicktime qt
AddType video/vnd.fvt fvt
AddType video/vnd.mpegurl m4u
AddType video/vnd.mpegurl mxu
AddType video/vnd.vivo viv
AddType video/x-dv dif
AddType video/x-dv dv
AddType video/x-fli fli
AddType video/x-ms-asf asf
AddType video/x-ms-asf asx
AddType video/x-ms-wm wm
AddType video/x-ms-wmv wmv
AddType video/x-ms-wmx wmx
AddType video/x-ms-wvx wvx
AddType video/x-msvideo avi
AddType video/x-sgi-movie movie
AddType x-conference/x-cooltalk ice
# Settings for hosting different languages.
# Required modules: mod_mime, mod_negotiation
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .arb .arabic
AddCharset ISO-8859-7 .iso8859-7 .grk .greek
AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew
AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk
AddCharset ISO-8859-10 .iso8859-10 .latin6
AddCharset ISO-8859-13 .iso8859-13
AddCharset ISO-8859-14 .iso8859-14 .latin8
AddCharset ISO-8859-15 .iso8859-15 .latin9
AddCharset ISO-8859-16 .iso8859-16 .latin10
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5.Big5 .big5 .b5
AddCharset cn-Big5 .cn-big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8 .koi8
AddCharset KOI8-E .koi8-e
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-U .koi8-u
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-7 .utf7
AddCharset UTF-8 .utf8
AddCharset UTF-16 .utf16
AddCharset UTF-16BE .utf16be
AddCharset UTF-16LE .utf16le
AddCharset UTF-32 .utf32
AddCharset UTF-32BE .utf32be
AddCharset UTF-32LE .utf32le
AddCharset euc-cn .euc-cn
AddCharset euc-gb .euc-gb
AddCharset euc-jp .euc-jp
AddCharset euc-kr .euc-kr
#Not sure how euc-tw got in - IANA doesn't list it???
AddCharset EUC-TW .euc-tw
AddCharset gb2312 .gb2312 .gb
AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2
AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4
AddCharset shift_jis .shift_jis .sjis
</IfModule>
## The modmimemagic module allows the server to use various hints from the
## contents of the file itself to determine its type. The MIMEMagicFile
## directive tells the module where the hint definitions are located.
<IfModule modmimemagic.c>
MIMEMagicFile /etc/apache2/magic
</IfModule>
## HostnameLookups: Log the names of clients or just their IP addresses
## e.g., www.apache.org (on) or 204.62.129.132 (off).
## The default is off because it'd be overall better for the net if people
## had to knowingly turn this feature on, since enabling it means that
## each client request will result in AT LEAST one lookup request to the
## nameserver.
HostnameLookups Off
## LogLevel: Control the number of messages logged to the error_log.
## Possible values include: debug, info, notice, warn, error, crit,
## alert, emerg.
LogLevel warn
<IfModule modlogconfig.c>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
#### For Mac OS X Server: Server Admin manages CustomLog directives
#### on a virtual host basis.
#CustomLog /var/log/apache2/access_log common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /var/log/apache2/access_log combined
</IfModule>
## Optionally add a line containing the server version and virtual host
## name to server-generated pages (error documents, FTP directory listings,
## mod_status and mod_info output etc., but not CGI generated documents).
## Set to "EMail" to also include a mailto: link to the ServerAdmin.
## Set to one of: On | Off | EMail
ServerSignature On
UseCanonicalName Off
## Aliases: Add here as many aliases as you need (with no limit). The format is
## Alias fakename realname
<IfModule mod_alias.c>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"
#### For Mac OS X Server: Uncomment this line to enable web-based
#### configuration of mailman:
#Include /etc/apache2/httpd_mailman.conf
<IfModule mod_setenvif.c>
<IfModule mod_negotiation.c>
# Allow convenient access to Apache manual
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru))?(/.*)?$ "/Library/WebServer/share/httpd/manual$1"
<Directory "/Library/WebServer/share/httpd/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru)){2,}(/.*)?$ /manual/$1$2
LanguagePriority en de es fr ja ko pt-br ru ForceLanguagePriority Prefer Fallback
</Directory>
</IfModule>
</IfModule>
</IfModule>
## Directives controlling the display of server-generated directory listings.
#### For Mac OS X Server: Note that indexing is further controlled
#### by the Server Admin application, which adds "Options +/-Indexes
#### in the virtual host scope.
<IfModule mod_autoindex.c>
## FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
## AddIcon* directives tell the server which icon to show for different
## files or filename extensions. These are only displayed for
## FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
## DefaultIcon is which icon to show for files which do not have an icon
## explicitly set.
DefaultIcon /icons/unknown.gif
## AddDescription allows you to place a short description after a file in
## server-generated indexes. These are only displayed for FancyIndexed
## directories.
## Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#AddDescription "Mac OS Disk Image file" .dmg
## ReadmeName is the name of the README file the server will look for by
## default, and append to directory listings.
## HeaderName is the name of a file which should be prepended to
## directory indexes.
## If MultiViews are amongst the Options in effect, the server will
## first look for name.html and include it if found. If name.html
## doesn't exist, the server will then look for name.txt and include
## it as plaintext if found.
ReadmeName README
HeaderName HEADER
## IndexIgnore is a set of filenames which directory indexing should ignore
## and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
## MetaDir: specifies the name of the directory in which Apache can find
## meta information files. These files contain additional HTTP headers
## to include when sending the document
#MetaDir .web
## MetaSuffix: specifies the file name suffix for the file containing the
## meta information.
#MetaSuffix .meta
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# The configuration below implements multi-language error documents through
# content-negotiation, and via the default Alias for /error in the vhost config file.
<Directory "/usr/share/httpd/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
</Directory>
ErrorDocument 400 /error/HTTPBADREQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTPNOTFOUND.html.var
ErrorDocument 405 /error/HTTPMETHOD_NOTALLOWED.html.var
ErrorDocument 408 /error/HTTPREQUEST_TIMEOUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTPLENGTHREQUIRED.html.var
ErrorDocument 412 /error/HTTPPRECONDITIONFAILED.html.var
ErrorDocument 413 /error/HTTPREQUEST_ENTITY_TOOLARGE.html.var
ErrorDocument 414 /error/HTTPREQUEST_URI_TOOLARGE.html.var
ErrorDocument 415 /error/HTTPUNSUPPORTED_MEDIATYPE.html.var
ErrorDocument 500 /error/HTTPINTERNAL_SERVERERROR.html.var
ErrorDocument 501 /error/HTTPNOTIMPLEMENTED.html.var
ErrorDocument 502 /error/HTTPBADGATEWAY.html.var
ErrorDocument 503 /error/HTTPSERVICEUNAVAILABLE.html.var
ErrorDocument 506 /error/HTTPVARIANT_ALSOVARIES.html.var
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
</IfModule>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
#<IfModule mod_info.c>
# <Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Location>
#</IfModule>
## Proxy Server directives.
<IfModule mod_proxy.c>
ProxyRequests Off
<IfModule moddiskcache.c>
CacheEnable disk /
CacheRoot "/var/run/proxy"
</IfModule>
</IfModule>
## SSL stuff
<IfModule mod_ssl.c>
SetEnvIf User-Agent ".MSIE." nokeepalive ssl-unclean-shutdown
SSLPassPhraseDialog exec:/etc/apache2/getsslpassphrase
SSLSessionCache shmcb:/var/run/ssl_scache(512000)
SSLSessionCacheTimeout 300
SSLMutex file:/var/log/apache2/ssl_mutex
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
AddType application/x-x509-ca-cert crt
AddType application/x-pkcs7-crl crl
</IfModule>
<IfModule mod_jk.c>
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel error
JkMount /*.jsp JBoss1
JkMount /servlet/* JBoss1
JkMount /examples/* JBoss1
</IfModule>
## The default server is used for status on a special port
#ServerName www.example.com
Listen 127.0.0.1:9010
DocumentRoot "/var/empty"
ErrorLog "/var/log/apache2/error_log"
<Directory /var/empty>
Order Deny,Allow
Deny from All
</Directory>
<IfModule modspotlightapple2.c>
Spotlight On
</IfModule>
<IfModule modauth_digestapple.c>
BrowserMatch "MSIE" AuthDigestEnableQueryStringHack=On
</IfModule>
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
</IfModule>
<IfModule mod_headers.c>
Header add MS-Author-Via "DAV"
RequestHeader set XFORWARDEDPROTO 'https' env=https
</IfModule>
<IfModule mod_encoding.c>
EncodingEngine on
NormalizeUsername on
DefaultClientEncoding UTF-8
# Windows XP?
AddClientEncoding "Microsoft-WebDAV-MiniRedir/" MSUTF-8
# Windows 2K SP2 with .NET
AddClientEncoding "(Microsoft .* DAV\$)" MSUTF-8
# Windows 2K SP2/Windows XP
AddClientEncoding "(Microsoft .* DAV 1.1)" CP932
# Windows XP?
AddClientEncoding "Microsoft-WebDAV*" CP932
# RealPlayer
AddClientEncoding "RMA/*" CP932
# MacOS X webdavfs
AddClientEncoding "WebDAVFS" UTF-8
# cadaver
AddClientEncoding "cadaver/" EUC-JP
</IfModule>
RLimitNPROC max max
ExtendedStatus On
Timeout 300
KeepAlive On
MaxKeepAliveRequests 500
KeepAliveTimeout 15
# As of Mac OS X Server 10.5, the compiled-in server limit is 2048
ServerLimit 2048
# Server Admin manages ListenBackLog as a function of MaxClients: min(511, MaxClients/2)
MaxClients 1024
ListenBackLog 512
# Including WebObjects Configs
Include /System/Library/WebObjects/Adaptors/Apache2.2/apache.conf
#### The following Include directive is essential for the virtual hosts to be usable.
Include "/etc/apache2/sites/*.conf"
========HTTPD.CONF==========I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code> -
URL Rewrite Rule: HTTP to HTTPS Not Working
Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
features.
I've trolled through the Internet for 2 days now for solutions to my problem, including the ones provided by the TechNet forums and by MVP Scott Forsyth. I've tried over 30 solutions, and none have resolved my issue. Granted some of the solutions I've tried
may have been repeats of others. After trying so many, I have had a hard time discerning the differences. Does it really matter, for instance if the pattern match for the {HTTPS} input is specified as
"^off$" or just "off"? I see this discrepancy (among others) everywhere. It seems like there are so many variations out there. It is quite confusing for the uninitiated and the newbies like myself to the
URL Rewrite technology. I have enabled and consulted my "Failed Request Tracing Rules" logs but cannot make any sense of the cryptic information it is providing.
I just cannot get my reverse proxy server to redirect http requests from the Internet to https to my internal web server. When a user specifies "https://server1.xxxxx.com". he is able to access the internal server via the reverse proxy (IIS) server.
But when he specifies "http://server1.xxxxx.com" he receives "Server Error 500 - Internal server error.There is a problem with the resource you are looking for, and it cannot be displayed."
At this point I am at my wits end, and am even considering configuring the protocol translation on our firewall. But this not my preference as it presents another layer of complexity, and device to troubleshoot later on. Below I've pasted my entire web.config
file with my most current version of the rule in question (in bold) for your review. I started to paste just the specific rule, but thought you might need to see the entire file in case something else may be conflicting with the rule.
Thank you in advance for your help.
Dave Robinson
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>
<rewrite>
<rules>
<clear />
<rule name="HTTP to HTTPS Redirect" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{REQUEST_URI}" redirectType="Found" />
</rule>
<rule name="ReverseProxyInboundRule1" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{CACHE_URL}" pattern="^(https?)://" />
</conditions>
<serverVariables>
<set name="HTTP_X_ORIGINAL_ACCEPT_ENCODING" value="{HTTP_ACCEPT_ENCODING}" />
<set name="HTTP_ACCEPT_ENCODING" value="" />
</serverVariables>
<action type="Rewrite" url="{C:1}://server1.xxxxx.com/{R:1}" />
</rule>
</rules>
<outboundRules>
<rule name="RestoreAcceptEncoding" preCondition="NeedsRestoringAcceptEncoding">
<match serverVariable="HTTP_ACCEPT_ENCODING" pattern="^(.*)" />
<action type="Rewrite" value="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" />
</rule>
<rule name="ReverseProxyOutboundRule1" preCondition="ResponseIsHtml1">
<match filterByTags="A, Form, Img" pattern="^http(s)?://server1.xxxxx.com/(.*)" />
<action type="Rewrite" value="http{R:1}://server1.xxxxx.local/{R:2}" />
</rule>
<preConditions>
<preCondition name="ResponseIsHtml1">
<add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
</preCondition>
<preCondition name="NeedsRestoringAcceptEncoding">
<add input="{HTTP_X_ORIGINAL_ACCEPT_ENCODING}" pattern=".+" />
</preCondition>
</preConditions>
</outboundRules>
</rewrite>
<tracing>
<traceFailedRequests>
<add path="*">
<traceAreas>
<add provider="ASP" verbosity="Verbose" />
<add provider="ISAPI Extension" verbosity="Verbose" />
<add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module,FastCGI,WebSocket"
verbosity="Verbose" />
</traceAreas>
<failureDefinitions timeTaken="00:00:00" statusCodes="404" />
</add>
</traceFailedRequests>
</tracing>
<httpErrors errorMode="Custom" />
<httpRedirect enabled="false" destination="" exactDestination="false" childOnly="false" httpResponseStatus="Permanent" />
</system.webServer>
</configuration>On Wed, 28 Jan 2015 17:53:41 +0000, dwrobins2000 wrote:
Here is my problem. I cannot get HTTP to HTTPS redirect to work using the URL Rewrite module. I am using version 2, by the way, which I understand is the latest version. I've also enabled the "Proxy Server" and Application Request Routing"
features.
Web/IIS related issues are better posted where the IIS experts are:
http://forums.iis.net
Paul Adare - FIM CM MVP
"The equivalent of treating dandruff by decapitation"
-- Frank Zappa on the Parents Music Resource Center' censorship plans -
How to create rewrite rule to accept only mail pass from antivirus server
I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
How to create rewrite rule for this case?Please read this technical note, for setting up such a configuration:
http://ims.balius.com/downloads/AlternateConversion.pdf
Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser. -
URL Rewrite Rules in 10.1.4
Hi,
I am having some trouble rewriting the urls, I can't make it work ...
What I want is to change the url:
http://www.mycompany.com/portal/page/portal/portal_sverige/
to
http://www.mycompany.com/sverige
Where "portal_sverige" is the page group.
What I did was:
Configure the properties in the page group:
Search pattern: /portal/page/portal/portal_sweden/
Replace pattern: /sweden/
And I went to enterprise manager, MT, http server, administration, advanced server properties, httpd.conf, and put in the lines:
RewriteEngine On
RewriteRule ^/sweden/(.*)$/portal/page/portal/portal_sweden/$1 [PT]
However, when I try to use navigator to edit a page in that group, I get:
http://www.mycompany.com/sweden/pagename?_mode=16
Returns:
Object not found. (WWC-50003)
And just typing in www.mycompany.com/sweden returns 404 error instead of the root page as I would have liked.
Any ideas about what to do? I can't really find any information ... is the change made in the MT ? IM ? Do I have to do it in some specific order? Is the syntax wrong?
Appreciate any help, thanksHello Sayeeas,
I posted an answer to this question a couple months back... check out the thread
Re: Portal URL Rewrite
Here is the answer:
In this example the name of the page group is "www":
Our rewrite rule is also set up in a virtual host section of the httpd.conf file as well so some of the options may not be required for your set up:
RewriteEngine on
RewriteOptions inherit
RewriteCond %{REQUEST_URI} !^/(portal|pls|images).*$
RewriteRule ^(.+) /portal/page/portal/www$1 [PT]
The rewrite condition allows us to ignore the rewrite for certain items in the path. This allows the portal navigator to work. There may be a couple more items that need to be added to the condition because I recently noticed that the help pages dont function properly.
In the portal configuration for the rewrite rule we specify:
Search pattern: /portal/page/portal/www
Replace pattern:
Thats right, the replace pattern is blank.
To see it in action check out http://www.sagelogix.com
-sean
Solutions Architect
http://www.sagelogix.com -
hi all,
in iMS 5.2, can any one suggest me how to write a rule in mapping file so that any mail sent from a particular user (say [email protected]) is also sent (i.e. Bcc 'd ) to [email protected] in addition to the "To:" address which the mail actually goes.
this is required to monitor all mails originating from the address [email protected]
regards,
rajesh.Yeah, no.
1. there is no such thing as a "rewrite rule" in the mappings file.
2. Likely, what you want is a sieve rule, or a "capture" rule.
3. Or, perhaps save the files to disk, like this:
for capturing all messages to disk files (this doesn't mail the messages, just saves 'em on disk, invisibly)
Add to your mappings file like this:
MESSAGE-SAVE-COPY
tcp_local|*@your_domain|D|/usr/ip lanet/server5/msg-dusty/imta/queue/tcp
local/*/* $Y/usr/iplanet/server5/msgsave/$1/$2
Add more lines to capture both inbound and outbound. The above line captures mails sent to the internet.
files get written to the desination directory, for your examination. Since there's no "message" sent, if the destination account gets full, no message gets sent back to give you away. Less performance impact, too.
I have 4 lines in my MESSAGE_SAVE_COPY area, to capture messages for specific people. . You may need fewer or more, depending on your exact needs. -
(OT) Incompatible Apache Mod-Rewrite Rules
The following Apache mod-rewrite rule works:
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
It displays URL's like mysite/About/Webmaster and
mysite/About/Search.
I've finally figured out how to apply a mod-rewrite rule to
my site's
home page...
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
It displays URL's like mysite/Arizona and mysite/Africa.
But when I combine them...
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
The first rewrite rule appears to knock the second rule out
of action.
Does anyone know how to modify either rewrite rule to make
them compatible?
Thanks.On 4/26/06 8:52 AM, "David Blomstrom" wrote:
> The following Apache mod-rewrite rule works:
>
> RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
>
> It displays URL's like mysite/About/Webmaster and
mysite/About/Search.
>
> I've finally figured out how to apply a mod-rewrite rule
to my site's
> home page...
>
> RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1
[L]
>
> It displays URL's like mysite/Arizona and mysite/Africa.
>
> But when I combine them...
>
> RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1
[L]
> RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
>
> The first rewrite rule appears to knock the second rule
out of action.
> Does anyone know how to modify either rewrite rule to
make them compatible?
>
> Thanks.
I'm not an expert on mod_rewrite, but you might be able to
get what you want
simply by reversing the order of the rules:
RewriteRule ^About/([a-zA-Z0-9_/-]+)/?$
About/index.php?bout=$1 [L]
RewriteRule ^/?([-a-zA-Z0-9_/]+)/?$ /index.php?home=$1 [L]
In theory, that should redirect your /About pages, and the
[L] tells Apache
not to parse any more rewrite rules, so the first rule (which
looks like it
simply redirects *everything*) wouldn't come into play.
There's something about times when Apache still parses
rewrite rules even
after the [L] flag, though, so that might not work. Why don't
you see if
that works, and if it doesn't, we can look at it further.
Sonjay -
LDAP Auth Rewrite Rule in Mapping file
Hi,
We are trying to set LDAP Auth Rewrite rule in mapping file to get users First Name & Last Name or Display name & Mail Address from LDAP Server instead of users individual client settings.
In Messaging 5.2 we had the follwoing setting, but it does not work any more for Messaging 6.2:
LDAP Auth Rewrite Entry in mapping file:
AUTH_REWRITE
*|*|*|*@* $]ldap:///dir1.domain.com:389/o=domain.com?cn?sub?(uid=$3)[$ <$]ldap:///dir1.domain.com:389/o=domain.com?mail?sub?(uid=$3)[>$Z
We are running:
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS mta 5.10 Generic_118833-03 sun4u sparc SUNW,Sun-Fire-V240
ll appreciate for any help or clue
ThanksThanks Jay,
Well, here is what we want to achieve.
We are looking for re-writing the FROM address of Sender against the LDAP Entry as cn <[email protected]>. This should solve problem of where users have entered wrong FROM information on their clients or trying to spoof FROM address to other users.
Currently, The system delivers e-mail with FROM headers as per client entry instead of re-writing it against AUTHENTICATED userid.
Following is the IMTA.CNF and MAPPINGS lines:
IMTA.CNF
! ims-ms
ims-ms defragment subdirs 20 notices 1 3 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto
$U+$S@$D
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver
maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 mailfromdnsverify dropblank vrfyhide
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel sasls
witchchannel tcp_auth missingrecipientpolicy 4 mailfromdnsverify dropblank vrfyhide
! tcp_extranet
tcp_extranet smtp mx single_sys subdirs 20 noreverse maxjobs 7 pool SMTP_POOL mustsaslserver allowswitchchannel saslswitchcha
nnel tcp_auth vrfyhide dropblank mailfromdnsverify dropblank missingrecipientpolicy 4
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4 authrewrite 3
MAPPINGS file
AUTH_REWRITE
*|*|*|*@* $]ldap:///dir.domain.edu:389/o=domain.edu,dc=domain,dc=edu?cn?sub?(uid=$3)[$ <$]ldap:///dir.domain.edu:389
/o=domain.edu,dc=domain,dc=edu?mail?sub?(uid=$3)[>$Z
Thanks for your help -
Glassfish 3.1.2.2 rewrite rule
What's installed
Glassfish 3.1.2.2
Apex Listener 2.0.4
Apex_4.2.2
Does anyone know if its possible to use Glassfish to Rewrite an inbound URL
such as
https://www.mysite.com
to
https://www.mysite.com/apex/f?p=1400:1
Under Weblogic it was ssl.config
RewriteEngine on
Rewrite Rule ^/$/apex/f?p=1400:1 [R=301, L]
Thanks
DerekI don't know where this setting is specified but if I were you I'd be looking into the glassfish documentation and posting in a glassfish forum rather than posting in a webservices forum.
http://www.java.net/forums/glassfish/glassfish -
Configuring VirtualHost (or) ReWrite rule for Tomcat
Dear All,
I am facing issue while configuring VirtualHost (or) ReWrite rule for below requirement in Tomcat.
Please Advise.,
We are configuring F5 in front of GRC controls so that if we accessed http://grc.company_name.com it should redirect to http://<server_name>:port/grc
We are able to configure F5 URL successfully with Tomcat (i.e.,)
Accessing https://grc.company_name.com is redirecting to aapche tomcat page of GRC & we need the URL https://grc.company_name.com should redirect to https://grc.company_name.com/grc
Thanks All,
Sunil.Sunil,
Have a look at My Oracle Support Note ID: 881362.1 - AACG 8.x: Is HTTPS supported for AACG UI and PEA Component?(Prod 4527 Comp Install)
I hope that helps. -
Changing sender email address via rewriting rules
My objective is to change my sender email address. For example, suppose my OCS email address is [email protected] and I would to send an email to [email protected]
John logs into yahoo mail and would see my mail. Upon opening my email, I would like John to see that the sender email address to be [email protected] so that whenever John replies my mail, the replied mail would go to [email protected] and not to [email protected]
I read the email admin guide and I configure the Sender rewriting rules within SMTP_OUT. I have key in the following within the Sender rewriting rules: $*@test.abc.com.my,$[email protected]
I restart the SMTP_OUT services and I check the log files in MIDTIER_HOME/oes/log/um_system/SMTP_OUT/12345
I found out that the rewriting rules have take effect on one of the lines.
Then I log into OCS as user Andrew with test.abc.com.my domain and send an email to yahoo.
I open my yahoo mail, which I receive the email.
However the sender email address remains unchanged which is [email protected]
How can I change the sender email domain?
thanks;
andrewYour observation is very correct in terms of symptoms, not of behaviour. We have numerous ER's there enabling header rewriting, too. Obviously for you, envelope rewriting works well, without to achieve the target you want to address. Please forward your request to Support Services with an Enhancement Request for native header rewriting.
Otherwise 3 ways:
1 Milter C-SDK
2 Milter general
3 relay accomplishing this task.
On 2,3 we have samples ready, for 3 in particular for postfix. -
Rewrite rules: how to forward all mails to the specific channel?
I have written an anti-virus plugin using the MTA SDK. Now I want to forward all the incoming messages to the channel, which is 'guarded' by my program (so my program is the channel's master).
I've added following to the end of imta.cnf, according to MTA SDK example:
! kav
x-kav master_debug logging
x-kav-daemon
And at the beginning of imta.cnf:
avp.ru $U%avp.ru@x-kav-daemon$Nx-kav
avp.ru $[email protected]
In this configuration, any incoming mail just miss my channel completely.
I changed it to this one:
$* $U%avp.ru@x-kav-daemon$Nx-kav
<2nd line removed>
in this case, mail is sent to our channel, but has host part '$*', and the message is failed to enqueue.
Also, it seems like this reqrite entry conflicts with ours:
! Rules to select local users
$* $A$E$F$U%$H$V$[email protected]
ultra5.avp.ru $U%$[email protected]
avp.ru $U%$[email protected]
As I understand, according to these rules, everything goes to @avp.ru or @ultra5.avp.ru goes to the local delivery channel ultra5.avp.ru. This is not what I want.
So, the questions are:
1. How to move all the messages (or just messages. which matched the specific domain) into my channel?
2. How to configure rewrite rules, so the message can leave the channel after processing, and continue the routing?Still doesn't work.
We've downloaded and installed patch 116568-52, and configured the channels:
tcp_local aliasdetourhost tcp_scan smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0
tcp-daemon
! tcp_intranet
tcp_intranet aliasdetourhost tcp_scan smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4 tcp_intranet-daemon
tcp_scan smtp mx single_sys subdirs 20 noreverse maxjobs 7 pool SMTP_POOL dequeue_removeroute
tcp_scan
After sending the message, it silently goes to tcp_scan channel, and handled by channel master program. After that the message stays in tcp_scan queue forever, with HELD extension.
Our channel master enqueues the processed message into the channel where it dequeues it, so the message seems to be looped. Here is the message:
t;1093881341
p;3
*;4
u;mailsrv
c;tcp_scan
s;tcp_scan.ultra5.avp.ru
n;f
h;<[email protected]>
m;[email protected]
d;20
j;rfc822
f;[email protected]
@tcp_scan:[email protected]
..Boundary_(ID_+ko348xG8vRKcadifuDhJg)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:41 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from tcp_scan.ultra5.avp.ru by ultra5.avp.ru
(Sun Java System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004))
id <[email protected]> for [email protected] (ORCPT [email protected]
30 Aug 2004 19:55:40 +0400 (MSD)
Received: from localhost.localdomain ([172.16.0.35])
by ultra5.avp.ru (Sun Java System Messaging Server 6.1 HotFix 0.01 (bu
24 2004)) with ESMTP id <[email protected]> for test@avp.
(ORCPT [email protected]); Mon, 30 Aug 2004 19:55:39 +0400 (MSD)
Content-return: allowed
Date: Mon, 30 Aug 2004 19:55:39 +0400 (MSD)
Date-warning: Date header was inserted by ultra5.avp.ru
From: [email protected]
Subject: sent on Mon Aug 30 19:58:29 2004
To: Undisclosed recipients: ;
Message-id: <[email protected]>
..Boundary_(ID_+ko348xG8vRKcadifuDhJg)
How to avoid this loop? Should our master enqueue the processed messages into another channel? If yes, what channel should we enqueue to? If no, how to avoid this loop? -
Hello,
I'm having a lot trouble understanding how to configure the iMS 6.2 MTA to do my will. I've read the MTA sections in the Messaging Server Administration Guide and still it seems that when I try to implement a rewrite rule, it doesn't work the way I thought it would.
So with that preface, I'd like to ask:
1) What would an imta.cnf rule look like that would route all incoming messages from a server at an IP (say 1.2.3.4) to a specific channel (say tcp_scan)?
2) Does anyone know of any good (or even marginal) books or other resources for learning how to program the iMS MTA?
Thank you,Yes, there's a book on iMS. You can get it on amazon.com.
check out the unofficial page at:
http://ims.balius.com
as well.
No, you can't use a rewrite rule to route based on source ip.
You can use mapping file and channels for much of that. Far better to help me understand what your goal is, rather than for you to try to solve your problem by the wrong route....
Maybe you are looking for
-
User status at operation level
Hi, I have created one user status profile and attached in order type. In this profile I have included Operation and Order header as an "Allowed object type" My problem is when I am changing user status at order level , it is not getting changed aut
-
How do I sync apple tv 2end gen
How do I sync my apple tv 2 so I can shut down the computer
-
LMS 3.2 - RME 4.3.1 Sync archive fails
Hi, Sync archive fails for some of my devices. This is the message : *** Device Details for .... *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> Telnet,TFTP,SSH,RCP,HTTPS Execution Result: CM00139 Could not archive config
-
I have an HP DesignJet 500 24" approx. 15 years old. It sat Idle for 5+ years with a broken belt & the Ink Cartridges & printHeads removed. My question is: Is it worth fixing (the belt costs $100.00 +-, and I can fix it myself), or should I get r
-
Fastest way to access data between String and char[]
Hi all, I've been programming a small String generator and was curious about the best and fastest way to do so. I've done it in two ways and now hope you can tell me if there is a "more java version" or fastest way between those two or if I'm totally