IAS connector plugin: problem & proposeed solution question

We use NES4.0 with iAS6 sp2 on Solaris 2.8
We found that our NES iAS-plugin configuration allows the client
to use various arbitrary URL's to call an iAS component (in our case
applogic),
namely the creazy looking links below surprisingly all work:
http://server/cgi-bin/AppLogic+TestApplogic
http://server/cgi-bin/bullshit/crap/AppLogic+TestApplogic
http://server/c/AppLogic+TestAppLogic
http://server/c/bullshit/crap/AppLogic+TestApplogic
(the normal documented way to call an applogic is
http://server/cgi-bin/gx.cgi/AppLogic+TestAppLogic)
Interestingly, the latter normal case allows any capitalization of applogic
name
while the former weird cases require exact capitalization.
As far as I can tell, the reason you can call an applogic like this is
because
we have in our obj.conf "/cgi-bin" and "/c" paths resolve to name="cgi"
object
which then (as iPlanet Installation Guide stipulates) calls "gxrequest" iAS
plugin function which then for some reason resolves the request to iPlanet,
no matter what.
We believe the possibility to call iAS components this way is not good,
specifically, it creates problems protecting applogic URL's, etc.
The solution that we tested is to create a different name object which only
matches
/cgi-bin/gx.cgi resource path and put iPlanet plugin function call into that
new object, namely:
1) in the obj.conf file, we add this line
NameTrans fn="pfx2dir" from="/cgi-bin/gx.cgi" dir="/opt/artd/cgi-bin"
name="gx"
right before this line:
NameTrans fn="pfx2dir" from="/cgi-bin" dir="/opt/artd/cgi-bin" name="cgi"
2) add section
<Object name="gx">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="gxrequest"
AddLog fn="gxlog"
</Object>
3) remove gxrequest call from name="cgi" section:
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
#Service fn="gxrequest"
Service fn="send-cgi"
#AddLog fn="gxlog"
</Object>
Now, my questions are:
is the problem known?
is there any standard/recommended solution by Netscape?
is there anything wrong with our solution?
Thanks for your time,
Alexei

Sorry you had that problem with the "microsoft .net framework assistant 0.0.0", but Mozilla can't control what Microsoft installs on their own operating system during a Microsoft update.
One solution, that I use, is to turn off automatic Microsoft updates and once a month I go to Microsoft's Update page and do a manual scan to see what Microsoft thinks my PC needs as far as updates. I de-select stuff that I don't want installed, like dotNet Framework, and then install the other things that I want installed. A little more work to do it that way, but I don't get that garbage that I think is unnecessary for me.

Similar Messages

Review Problems and Solutions after upgrade question

I have recently migrated from WSS 3.0 to Sharepoint Foundation 2010. I now have a the following messages in Sharepoint Admin.
The SharePoint Health Analyzer has detected some critical issues that require your attention. View these issues.
Accounts used by application pools or service identities are in the local machine Administrators group.
Using highly-privileged accounts as application pool or as service identities poses a security risk to the farm, and could allow malicious code to execute. The following services are currently running as accounts in the machine Administrators group: SharePoint
Central Administration v4 (Application Pool)
SPTimerV4(Windows Service)
Built-in accounts are used as application pool or service identities.
Using built-in accounts like Network Service or Local System as application pool or as service identities is not supported in a farm configuration. The following services are currently running as built-in identities on one or more servers: SPSearch4(Windows
Service)
The last time I tried to correct this type of issue I wound up creating a problem that I was unable to correct. I had to reinstall Sharepoint. How critical is this and what is the best way to make these changes without causing larger problems?
I am using two accounts to run the services/pools/etc. Well 3 if you count the Local System. Account #1 and #2 are not in the Admins group. They were when I installed everything but I have since removed them.

Hi Poly,
I recommend to follow the steps below to see if the warning message remains:
1.   Re-run Rule Definition.
In Central Administration, go: Monitoring > Health Analyzer > Review rule definitions. On the Health Analyzer Rule Definitions page, in the Category: Security group, click the rule definition link, Accounts used by application pools or service identities
are in the local machine Administrators group. Click the Run Now button, then click Close. Wait a minute or two, and then return to Review problems and solutions page.
2.   Reset Farm Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Administration service. Double-click this service, select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
3.   Reset the Farm Timer Service.
Login to the local machine hosting the farm Central Administration application. Go to Start > Administrative Tools > Services and scroll down to the SharePoint 2010 Timer service. Double-click this service and select the Log On tab. If not selected,
select the This account option and then enter or re-enter the farm account. At the warning prompt, "The new login name will not take effect until you stop and restart the service," click OK. Stop and restart the service, and then
click OK. Wait a minute or two, and then return to Review problems and solutions page.
More references:
http://alstechtips.blogspot.com/2013/12/health-analyzer-accounts-used-by.html
http://technet.microsoft.com/en-us/library/hh344224(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff805066(v=office.14).aspx
Victoria Xia
TechNet Community Support

LR 4.4 (and 5.0?) catalog: a problem and some questions

Introductory Remark
After several years of reluctance this March I changed to LR due to its retouching capabilities. Unfortunately – beyond enjoying some really nice features of LR – I keep struggling with several problems, many of which have been covered in this forum. In this thread I describe a problem with a particular LR 4.4 catalog and put some general questions.
A few days ago I upgraded to 5.0. Unfortunately it turned out to produce even slower ’speed’ than 4.4 (discussed – among other places – here: http://forums.adobe.com/message/5454410#5454410), so I rather fell back to the latter, instead of testing the behavior of the 5.0 catalog. Anyway, as far as I understand this upgrade does not include significant new catalog functions, so my problem and questions below may be valid for 5.0, too. Nevertheless, the incompatibility of the new and previous catalogs suggests rewriting of the catalog-related parts of the code. I do not know the resulting potential improvements and/or new bugs in 5.0.
For your information, my PC (running under Windows 7) has a 64-bit Intel Core i7-3770K processor, 16GB RAM, 240 GB SSD, as well as fast and large-capacity HDDs. My monitor has a resolution of 1920x1200.
1. Problem with the catalog
To tell you the truth, I do not understand the potential necessity for using the “File / Optimize Catalog” function. In my view LR should keep the catalog optimized without manual intervention.
Nevertheless, when being faced with the ill-famed slowness of LR, I run this module. In addition, I always switch on the “Catalog Settings / General / Back up catalog” function. The actually set frequency of backing up depends on the circumstances – e.g. the number of RAW (in my case: NEF) files, the size of the catalog file (*.lrcat), and the space available on my SSD. In case of need I delete the oldest backup file to make space for the new one.
Recently I processed 1500 photos, occupying 21 GB. The "Catalog Settings / Metadata / Automatically write changes into XMP" function was switched on. Unfortunately I had to fiddle with the images quite a lot, so after processing roughly half of them the catalog file reached the size of 24 GB. Until this stage there had been no sign of any failure – catalog optimizations had run smoothly and backups had been created regularly, as scheduled.
Once, however, towards the end of generating the next backup, LR sent an error message saying that it had not been able to create the backup file, due to lack of enough space on the SSD. I myself found still 40 GB of empty space, so I re-launched the backup process. The result was the same, but this time I saw a mysterious new (journal?) file with a size of 40 GB… When my third attempt also failed, I had to decide what to do.
Since I needed at least the XMP files with the results of my retouching operations, I simply wanted to save these side-cars into the directory of my original input NEF files on a HDD. Before making this step, I intended to check whether all modifications and adjustments had been stored in the XMP files.
Unfortunately I was not aware of the realistic size of side-cars, associated with a certain volume of usage of the Spot Removal, Grad Filter, and Adjustment Brush functions. But as the time of the last modification of the XMP files (belonging to the recently retouched pictures) seemed perfect, I believed that all my actions had been saved. Although the "Automatically write changes into XMP" seemed to be working, in order to be on the safe side I selected all photos and ran the “Metadata / Save Metadata to File” function of the Library module. After this I copied the XMP files, deleted the corrupted catalog, created a new catalog, and imported the same NEF files together with the side-cars.
When checking the photos, I was shocked: Only the first few hundred XMP files retained all my modifications. Roughly 3 weeks of work was completely lost… From that time on I regularly check the XMP files.
Question 1: Have you collected any similar experience?
2. The catalog-related part of my workflow
Unless I miss an important piece of knowledge, LR catalogs store many data that I do not need in the long run. Having the history of recent retouching activities is useful for me only for a short while, so archiving every little step for a long time with a huge amount of accumulated data would be impossible (and useless) on my SSD. In terms of processing what count for me are the resulting XMP files, so in the long run I keep only them and get rid of the catalog.
Out of the 240 GB of my SSD 110 GB is available for LR. Whenever I have new photos to retouch, I make the following steps:
create a ‘temporary’ catalog on my SSD
import the new pictures from my HDD into this temporary catalog
select all imported pictures in the temporary catalog
use the “File / Export as Catalog” function in order to copy the original NEF files onto the SSD and make them used by the ‘real’ (not temporary) new catalog
use the “File / Open Catalog” function to re-launch LR with the new catalog
switch on the "Automatically write changes into XMP" function of the new catalog
delete the ‘temporary’ catalog to save space on the SSD
retouch the pictures (while keeping and eye on due creation and development of the XMP files)
generate the required output (TIF OR JPG) files
copy the XMP and the output files into the original directory of the input NEF files on the HDD
copy the whole catalog for interim archiving onto the HDD
delete the catalog from the SSD
upon making sure that the XMP files are all fine, delete the archived catalog from the HDD, too
Question 2: If we put aside the issue of keeping the catalog for other purposes then saving each and every retouching steps (which I address below), is there any simpler workflow to produce only the XMP files and save space on the SSD? For example, is it possible to create a new catalog on the SSD with copying the input NEF files into its directory and re-launching LR ‘automatically’, in one step?
Question 3: If this I not the case, is there any third-party application that would ease the execution of the relevant parts of this workflow before and/or after the actual retouching of the pictures?
Question 4: Is it possible to set general parameters for new catalogs? In my experience most settings of the new catalogs (at least the ones that are important for me) are copied from the recently used catalog, except the use of the "Catalog Settings / Metadata / Automatically write changes into XMP" function. This means that I always have to go there to switch it on… Not even a question is raised by LR whether I want to change anything in comparison with the settings of the recently used catalog…
3. Catalog functions missing from my workflow
Unfortunately the above described abandoning of catalogs has at least two serious drawbacks:
I miss the classification features (rating, keywords, collections, etc.) Anyway, these functions would be really meaningful for me only if covering all my existing photos that would require going back to 41k images to classify them. In addition, keeping all the pictures in one catalog would result in an extremely large catalog file, almost surely guaranteeing regular failures. Beyond, due to the speed problem tolerable conditions could be established only by keeping the original NEF files on the SSD, which is out of the question. Generating several ‘partial’ catalogs could somewhat circumvent this trap, but it would require presorting the photos (e.g. by capture time or subject) and by doing this I would lose the essence of having a single catalog, covering all my photos.
Question 5: Is it the right assumption that storing only some parts (e.g. the classification-related data) of catalog files is impossible? My understanding is that either I keep the whole catalog file (with the outdated historical data of all my ‘ancient’ actions) or abandon it.
Question 6: If such ‘cherry-picking’ is facilitated after all: Can you suggest any pragmatic description of the potential (competing) ways of categorizing images efficiently, comparing them along the pros and contras?
I also lose the virtual copies. Anyway, I am confused regarding the actual storage of the retouching-related data of virtual copies. In some websites one can find relatively old posts, stating that the XMP file contains all information about modifying/adjusting both the original photo and its virtual copy/copies. However, when fiddling with a virtual copy I cannot see any change in the size of the associated XMP file. In addition, when I copy the original NEF file and its XMP file, rename them, and import these derivative files, only the retouched original image comes up – I cannot see any virtual copy. This suggests that the XMP file does not contain information on the virtual copy/copies…
For this reason whenever multiple versions seem to be reasonable, I create renamed version(s) of the same NEF+XMP files, import them, and make some changes in their settings. I know, this is far not a sophisticated solution…
Question 7: Where and how the settings of virtual copies are stored?
Question 8: Is it possible to generate separate XMP files for both the originally retouched image and its virtual copy/copies and to make them recognized by LR when importing them into a new catalog?

A part of my problems may be caused by selecting LR for a challenging private project, where image retouching activities result in bigger than average volume of adjustment data. Consequently, the catalog file becomes huge and vulnerable.
While I understand that something has gone wrong for you, causing Lightroom to be slow and unstable, I think you are combining many unrelated ideas into a single concept, and winding up with a mistaken idea. Just because you project is challenging does not mean Lightroom is unsuitable. A bigger than average volume of adjustment data will make the catalog larger (I don't know about "huge"), but I doubt bigger by itself will make the catalog "vulnerable".
The causes of instability and crashes may have NOTHING to do with catalog size. Of course, the cause MAY have everything to do with catalog size. I just don't think you are coming to the right conclusion, as in my experience size of catalog and stability issues are unrelated.
2. I may be wrong, but in my experience the size of the RAW file may significantly blow up the amount of retouching-related data.
Your experience is your experience, and my experience is different. I want to state clearly that you can have pretty big RAW files that have different content and not require significant amounts of retouching. It's not the size of the RAW that determines the amount of touchup, it is the content and the eye of the user. Furthermore, item 2 was related to image size, and now you have changed the meaning of number 2 from image size to the amount of retouching required. So, what is your point? Lots of retouching blows up the amount of retouching data that needs to be stored? Yeah, I agree.
When creating the catalog for the 1500 NEF files (21 GB), the starting size of the catalog file was around 1 GB. This must have included all classification-related information (the meaningful part of which was practically nothing, since I had not used rating, classification, or collections). By the time of the crash half of the files had been processed, so the actual retouching-related data (that should have been converted properly into the XMP files) might be only around 500 MB. Consequently, probably 22.5 GB out of the 24 GB of the catalog file contained historical information
I don't know exactly what you do to touch up your photos, I can't imagine how you come up with the size should be around 500MB. But again, to you this problem is entirely caused by the size of the catalog, and I don't think it is. Now, having said that, some of your problem with slowness may indeed be related to the amount of touch-up that you are doing. Lightroom is known to slow down if you do lots of spot removal and lots of brushing, and then you may be better off doing this type of touch-up in Photoshop. Again, just to be 100% clear, the problem is not "size of catalog", the problem is you are doing so many adjustments on a single photo. You could have a catalog that is just as large, (i.e. that has lots more photos with few adjustments) and I would expect it to run a lot faster than what you are experiencing.
So to sum up, you seem to be implying that slowness and catalog instability are the same issue, and I don't buy it. You seem to be implying that slowness and instability are both caused by the size of the catalog, and I don't buy that either.
Re-reading your original post, you are putting the backups on the SSD, the same disk as the working catalog? This is a very poor practice, you need to put your backups on a different physical disk. That alone might help your space issues on the SSD.

Problem installing SOLUTION MANAGER in db2

Dear consultans;
I have a problem installing solution manager in db2.
In phase 'Import ABAP' the sapinst shows the following message:
Execution of the command "/usr/sap/SOL/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
ERROR      2008-08-26 11:19:30.422
           CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.e
xe.log.
ERROR      2008-08-26 11:19:30.748 [sixxcstepexecute.cpp:951]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Cr
eateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnecti
on was executed with status ERROR ( Last error reported by the step :Process call '/usr/sap/SOL/SYS/exe/run/R3load -testconnect' exi
ts with error code 2. For details see log file(s) R3load.exe.log.).
The file R3load.exe.log show the following..
(root)sidtsmp:/install/instalacion> more R3load.exe.log
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOL/SYS/exe/run/R3load: START OF LOG: 20080826111928
/usr/sap/SOL/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#16 $ SAP
/usr/sap/SOL/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled May 5 2008 21:32:44
/usr/sap/SOL/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SOL' as 'sapsol' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/SOL/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SOL/SYS/exe/run/R3load: END OF LOG: 20080826111930
And if I do the following sentence it's finished ok
sidtsmp:db2sol 6> db2 connect to SOL
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = DB2SOL
Local database alias   = SOL
(root)sidtsmp:/sapmnt/SOL/exe> su - db2sol
sidtsmp:db2sol 1> db2 connect to SOL user sapsol
Enter current password for sapsol:
   Database Connection Information
Database server        = DB2/AIX64 9.1.4
SQL authorization ID   = SAPSOL
Local database alias   = SOL
I reboot the server and now the sentence finished wrong.
sidtsmp:db2sol 8> db2 connect to SOL user sapsol
Enter current password for sapsol:
SQL30082N Security processing failed with reason "15" ("PROCESSING FAILURE").
SQLSTATE=08001
sidtsmp:db2sol 9>
Any suggestion?
Best regards,
Julene

Hi Julene.
Just one suggestion really,....
post the question on the Solution Manager forum
Chrs, M

Best Practice on Knowledge Management, IS01 Problems and Solutions

Been Playing with KM and looking for insight from other users (will give points) using it for ICWC.
We have mulitple product lines where we have documents with Q & A's in each line. As I look at moving that into CRM via IS01, I am looking for any Best Practices or recommendations.
1. Create a single problem and solution for every question.
2. Create a single problem (list all questions) for every product line and create multiple solutions that are linked to that problem (solution for each question)
3. Is LMSW a good tool for loading data in mass?
The ICWC search brings back the 1st line on the problem & solution on the screen, meaning I try to limit the characters used so it fits on the ICWC screen, a long 1st line on the problem doesn't allow the agent to see enough of the solution without opening the link.
Thanks,
Edited by: Glenn Michaels on Jun 14, 2008 9:52 PM

Hello Glenn,
If it helps, here's a scenario about KB on my company system.
Our call center supervisors are the persons who creates problem and solutions in our KB. They maintain it but don't use IS01 transaction. They use instead People Centric BSP's for Problem s and solutions (they're integrated in IC webclient with the help of transaction launcher).
Normally, they prefer creating multiple solutions to one problem, instead of single problem - single solution method. This because some questions may have multiple solutions. They could put all the solutions text in one solution object, but for maintainance purposes we think it's better to create multiple solutions object to every solution text, because if one solution becames obsete, all we have to do is unlink instead of changing the text.
We don't use LSMW. I don't have much experience in LSMW, but if you use it, be careful to respect KB interval numbers for problems and solutions. We implement an initial set of problems and solutions in our Development system, and we passed to the Quality and Produtive system, with the precious help of sap note '728295 - Transport the SDB customization between two CRM systems' and '728668 -Transport the content of the SDB between two CRM systems'.
One cool idea to use the KB is using Auto-suggest feature. The idea is to integrate the links between problems and solutions with, for example, service ticket categorization, using BSP Category modeler, and when an agent classifies a ticket, at the top of the screen it will appear the suggested solutions/problems for the classification choosen.
I think that's all.
Sorry for my poor english. Today I'm not feeling very inspirated
Kind regards.
Edited by: Bruno Garcia on Jun 17, 2008 9:51 PM (added note 728668)

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6

PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6 & a mac osx 10.7.5 I have downloaded the pluginhttps://sourceforge.net/projects/panotools/ I drag it to the applications folder (applications/photoshop/plugins) and it shows up there, but it does not show up when I reopen photoshop, can anyone tell me if this is a valid plugin or what I am doing wrong?

Thank you for the link, I don't see where the licensing is listed at all, I also don't see where it says it is for existing CS2 users only & the line install a special version that does not require activation -
doesn't scream it'd be a problem to load it especially since I already own a later version that I can't use the plugin on - …I don't find the site all that informative. I appreciate all the answers & responses to my use of CS2 but I'd really just like to receive an answer to the original question of if the plugin works with it or not…if anyone has that answer I'd appreciate it.
Is there a place I can purchase it? I will gladly do so if I can get the plugin to work-that is my goal.

GX Error - after - Install Web Connector Plugin for iWS

After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

Okay, lets say more about the scenario:
server1 server2
|---------------- ---------------------------
| iWeb Server | | iApplication Server (Exec
Port 10818) |
| with plugin |---------------------|LDAP Server (Port 50505)
|
|---------------| | iWeb Server with Plugin
|
If I go to server 2:
http://server2/NASApp/fortune/fortune
fortune runs
If I go to server1
http://server1/NASApp/fortune/fortune
I got the message on the browser
GX Error
socket result code missing !!!
Thats meens, the application servers runs fine.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 1:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 10:57:25:7] info: NSAPICLI-012: plugin reqstart, tickct:
1002185845s 794005us
[04/Okt/2001 10:57:25:7] warning: UTIL-013: GXGUID: NameTrans lookup failed
(Applogic Servlet fortune_fortune)
[04/Okt/2001 10:57:25:7] warning: NSAPICLI-011: socket result code
missing!!!
[04/Okt/2001 10:57:25:7] info: NSAPICLI-009: plugin reqexit: 0s 1828us
In the kjs_1_CCS0 log on server 2 I find the following.
[02/Okt/2001 17:30:18:1] error: Exception: SERVLET-execution_failed: Error
in executing servlet JSPRunner: java.lang.NullPointer
Exception
Exception Stack Trace:
java.lang.NullPointerException
at com.netscape.server.servlet.jsp.JSPRunner.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compiled
Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If I run from server 2:
In the kxs_0_CCS0 log on the server2 I find the following:
[04/Okt/2001 11:08:58:1] info: NSAPICLI-012: plugin reqstart, tickct:
1002186538s 187717us
[04/Okt/2001 11:08:58:3] info: NSAPICLI-009: plugin reqexit: 0s 113269us
In the kjs_1_CCS0 log on server 2 I find the following.
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:55:8] info: FortuneServlet: init
[04/Okt/2001 11:05:55:8] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: --------------------------------------
[04/Okt/2001 11:05:56:0] info: jsp.APPS.fortune.fortune: init
[04/Okt/2001 11:05:56:0] info: --------------------------------------
++++++++++++++++++
In the error case there is a NameTrans Lookup failure for the web
application.
The naming service from the application server can't locate the fortune
application.
I hope it helps you the locate more detailed the problem.
Thanks,
Sven K
"Sven Kirsten" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
After custom installation from web connector plugin in iWS, the
browser shows
GX Error
socket result code missing !!!
Is seems the plugin can't call the remote web application.
I see a establised connection between the web server and die application
server port 10818 (Exec Proc)
and to the LDAP server port 50505.
If I connect directly the web server installed lokaly the appilkation runs
(fortune).
Any idee ?
Sven Kirsten

SOLMAN 7.0 problem with Stack16-question on note#1231975

SOLMAN 7.0 problem with Stack16-question on note#1231975
I'm importing Stacks 16&17 into our Solution Manager 7.0 system
and getting errors when importing the Java part in JSPM after the ABAP
went in with no errors. The error matches OSS note 1231975 but we are
having problems understanding what this note is advising to fix the
issue. "SAPJTECHS SP16 component needs to be applied before proceeding
with the whole SP16 stack. It should fix the usages on the systems
fixing missing rows at BC_SL_PARTS table." Each time we start JSPM it
gives the errors mentioned in this note. How are we to import
SAPJTECHS before the rest of the Java Support Packs if we can't get
JSPM to come up due to this error? About half of the Java Support
Packs were imported before this error occured.

You can deploy that component manually using SDM (instead of JSPM).
Markus

Any chart plugin, or other solution available able to "CAPTURE A VALUE AT TIME OF CLICK" ?????

Hi,
I just realized that the query is not my problem.
I have a graph that uses the query below, and it displays bars showing 4 different Market Segment revenue totals in each bar.
My requirement is to drill down into that section of the graph and show what makes up that total.
I can not add this to the LINK because at the time of query the Market Segment is unknown.
Is there any chart plugin, or other solution available able to "CAPTURE A VALUE AT TIME OF CLICK" ?????
select NULL LINK,
        to_char(to_date(year,'YY'),'YYYY') year,
        sum (decode(market_segment,'Advanced Technology Facilities',revenue,0)) "Advanced Technology",
        sum (decode(Market_segment,'Energy and Environmental Technologies',revenue,0)) "Energy and Environmental",
        sum (decode(market_segment,'High Tech Infrastructure',revenue,0)) "High Tech Infrastructure",
        sum (decode(market_segment,'Life Science and Chemicals',revenue,0)) "Life Science and Chemicals"
     from apps.xxmwz_apex_rev_5yrs
group by year
order by 1

My graph changes from showing 4 segments in each bar to one segment. Is there a flag in AnyChart to set?
select --'f?p=&APP_ID.:2:'||:app_session||'::::P2_YEAR,P2_SEGMENT:'||to_char(to_date(year,'YY'),'YYYY') ||','||market_segment||':' LINK,
        to_char(to_date(year,'YY'),'YYYY') year,
        sum (decode(market_segment,'Advanced Technology Facilities',revenue,0)) "Advanced Technology",
        sum (decode(Market_segment,'Energy and Environmental Technologies',revenue,0)) "Energy and Environmental",
        sum (decode(market_segment,'High Tech Infrastructure',revenue,0)) "High Tech Infrastructure",
        sum (decode(market_segment,'Life Science and Chemicals',revenue,0)) "Life Science and Chemicals"
     from apps.xx_apex_rev_5yrs
group by year ---, market_segment
order by 1
YEAR
Advanced Technology
Energy and Environmental
High Tech Infrastructure
Life Science and Chemicals
2009
224304.16075
25.37052
45495.0178
764.17256
2010
618576.29542
9.909
102152.89536
2922.65983
2011
952785.70452
0
129197.48215
3837.69426
2012
621226.3018
974.55686
257489.31568
132347.96319
2013
440862.10151
1495.35073
83736.92111
653579.60659
select --'f?p=&APP_ID.:2:'||:app_session||'::::P2_YEAR,P2_SEGMENT:'||to_char(to_date(year,'YY'),'YYYY') ||','||market_segment||':' LINK,
        to_char(to_date(year,'YY'),'YYYY') year,
        sum (decode(market_segment,'Advanced Technology Facilities',revenue,0)) "Advanced Technology",
        sum (decode(Market_segment,'Energy and Environmental Technologies',revenue,0)) "Energy and Environmental",
        sum (decode(market_segment,'High Tech Infrastructure',revenue,0)) "High Tech Infrastructure",
        sum (decode(market_segment,'Life Science and Chemicals',revenue,0)) "Life Science and Chemicals"
     from apps.xx_apex_rev_5yrs
group by year, market_segment
order by 1
YEAR
Advanced Technology
Energy and Environmental
High Tech Infrastructure
Life Science and Chemicals
2009
0
0
0
764.17256
2009
224304.16075
0
0
0
2009
0
0
45495.0178
0
2009
0
25.37052
0
0
2010
0
9.909
0
0
2010
0
0
102152.89536
0
2010
0
0
0
2922.65983
2010
618576.29542
0
0
0
2011
0
0
129197.48215
0
2011
0
0
0
3837.69426
2011
952785.70452
0
0
0
2012
621226.3018
0
0
0
2012
0
974.55686
0
0
2012
0
0
257489.31568
0
2012
0
0
0
132347.96319
2013
440862.10151
0
0
0
2013
0
1495.35073
0
0
2013
0
0
0
653579.60659
2013
0
0
83736.92111
0

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

Zen Vision 30GB Firmware Problem - No solution wo

I have a Zen Vision 30GB (not a Zen Vision M or W, just a Zen Vision). On Friday I was trying to add songs to my Zen and halfway through adding the songs I got an error on the computer saying "player not connected". So I undocked the player, turned it off and reset my computer. Saturday morning I turned on my Zen to try to add songs again and I got the error message on my Zen?"Firmware Problem" and it put me in "Recovery Mode". The first thing I did was try to reload the firmware, but when I plugged the Zen to the computer it says "docked", but I cannot move through the menu. When I unhook it from the computer I can move through the menu. BTW I am running Windows Vista 32-bit. I have uninstalled the Zen software and installed the software off the Creative website for Vista, but when I try to run the firmware it says "Player not connected, please connect player."? When I plug the player in via USB my computer recognizes it and prompts me if I want to sync my player, so there isn't anything wrong with my USB connection. The?Device Manager recognizes it however Windows Media Player does not. I get the same error message when I try to do the Recovery Tool on the Creative website. I have looked for solutions on the forums and just doing Google searches, but I have not been able to get anything to work. Please help me!? The player is less than a year old. I have never had any problems with it before, never been dropped or anything like that, so i am not sure what is going on. Any help or suggestions would be great!? I sent an email to customer support yesterday and the reply I received this morning was no help. First they thought I had the Zen Vision M, even though I specifically said I had the Zen Vision and gave them the serial number and everything. I sent them back a message today and hopefully they can help, but it is frustrating having to send an email and wait around for a reply.

Re: Zen Vision 30GB Firmware Problem - No solution works\ I recently had this problem with a player i got off Ebay. What I did was format>cleanup>reboot the device thru the recovery screen on the the player. Problem solved . Be advised this will erase all the files (music ect.) http://forums.creative.com/creativel...ap&thread.id=3
Dragonboy wrote:
I seem to have a very similar problem as you. I have a zen vision m (30g) and i also use vista. I am getting the message "firmware problem" after is tries to "rebuild". I need some major help. I ended up giving up a while ago and bought a microsoft zune. It is not as good and i miss my zen. If anyone can give me some info it would be much appreciated.

CRM Solution database How to main the problems and solution types

Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinaker

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

CD-DVD ( Optical Drives ) Common Problems and Solutions

CD/DVD Common Problems…
Dear friends, I have noticed that many laptop users suffering from some common problems. cd/dvd ( Optical Drive ) problems are one of them.. so here I am trying to collect and make available solutions related to cd/dvd drives . Almost all solutions are already advised in previous posts but these are all are in one post. We all are here for sharing problems and solutions. I always appreciate all corrections and additions. In first look optical drive problems seems like hardware problem. These problems have hardware/software both possibility so I request to administrator, to make available this post in both ( hardware – software ) sections. I put only solution links to save forum’s valuable space.
CD-DVD drive called an OPTICAL DRIVE.
CD-DVD discs called A MEDIA
There are 2 possibilities for optical drives problems.
Widows based problems
Hardware based problems
First here are windows based few common problems
All windows based solutions are from Microsoft Corporation.
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs - Windows XP...
Symptom:Your CD drive or DVD drive is missing or not recognized by Windows or other programs, so you cannot play or access a CD or DVD
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows V...
Symptom : You upgrade a computer to Windows Vista or install Windows Vista Service Pack 1 or you install or uninstall applications that have a CD/DVD filter driver.
When you restart the computer, the CD drive or DVD drive no longer works as expected
Your CD or DVD drive cannot read or write media
Symptoms : Your CD or DVD Drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to by your CD or DVD drive
You receive one of the following errors:
A class specific or device specific driver is missing or corrupt
A CD or DVD drive cannot be found or is not connected
The CD or DVD drive is experiencing a problem that prevents it from working properly
The CD or DVD drive is not accessible via an assigned drive letter
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or ...
Symptoms:
The disc label does not appear in Windows Explorer.
The contents of the disc do not appear in Windows Explorer.
When you insert the disc in the drive or when your computer tries to read the disc,the computer stops responding.
You cannot eject the disc from the drive.
The computer takes a long time to read the disc.
CD drive or DVD drive errors may cause unexpected program crash in Windows XP
Symptom : Error
"Program_name has caused and error and must be closed. We apologize for the inconvenience. If you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send to help us improve rogram_name. We will treat this report as confidential and anonymous. To see what data this error report contains, click here."
You cannot write to a DVD-RAM disc that is in a DVD-RAM/CD-RW combination drive
Symptom : "The disc in the drive is not a writable CD or it is full. Please insert a blank, writable CD into drive D:\, or insert a disc with enough free space to hold all the files you have selected for writing to CD. "
DVD-RW Drive Appears in My Computer as a DVD-R Drive
Symptom : "If your computer has a DVD-RW (digital video disc rewritable) optical drive, the DVD-RW icon may not appear in My Computer. Instead, your DVD-RW optical drive may appear as a DVD-R (digital video disc recordable) icon."
Windows XP does not recognize a DVD-RW disc
Symptom : When you insert a DVD-RW disc into the DVD drive of a Microsoft Windows XP-based computer, Windows XP does not recognize the disc. For example, you do not see any files on the disc.
You may also experience this problem with DVD-RW discs that have been formatted as VD-VR. Some consumer DVD recorders use the DVD-VR format.
CD-R drive or CD-RW drive is not recognized as a recordable device
Symptom : When you try to burn data to a CD-R or a CD-RW, you do not have the option to send data to the CD drive.
When you view the properties of the CD-R drive or the CD-RW drive, you notice that the Recording tab is not displayed in the CD Drive (drive_letter: ) Properties dialog box, where drive_letter is the letter of the CD-R drive or CD-RW drive.
Note To view the CD Drive (drive_letter: ) Properties dialog box, click Start, click My Computer, right-click the CD drive that you want, and then click Properties.
Additionally, you may receive the following error message:
There is no disc in the drive. Please insert a writable CD into drive.
CD-ROM Drive May Not Be Able to Read a UDF-Formatted Disc in Windows XP
Symptom : Your computer cannot read some or all files on CDs or DVDs that were recorded through the use of the Optical Storage Technology Association (OSTA) Universal Disk Format (UDF) file system standard. Symptoms may include:
The disc is not recognized at all and shows up as empty.
Error messages such as "The file or directory is corrupt and unreadable" appear when you try to access files in Windows Explorer.
Some portions of a DVD-video may not function correctly
How to troubleshoot issues that occur when you write data to a CD-R or CD-RW optical disc in Windows...
Symptoms :issues that occur if you write data to CD-R and CD-RW optical discs and how to troubleshoot issues with CD-R and CD-RW drives.
These are most common issues related to optical drivers.
Tomorrow will try to explain hardware possibilities.
All friends suggestions and correction are highly advisable..

I upgraded to W7 and everything works fine except two things.
I followed the
http://h30434.www3.hp.com/t5/Operating-systems-and-software/Windows7-Upgrade-Guide-for-dv6000-dv9000...
process and still have the problem DVD not under device manager
DVD spins when booting but after W7 splash screen no longer functions, it did work prior to upgrade.
I have seen many listed problems but no solution. my device is a TS-L632N and based on the most recent drivers i can find still not working. I looked in the registry and it is not listed under cdrom or
{4D36E965-E325-11CE-BFC1-08002BE10318}
there are no upper or lower filters

Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
anyway, here is the code.
<object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

expresslane.apple.com to get a hold of itunes to reset them by email the only way

IAS connector plugin: problem & proposeed solution question

Similar Messages

Maybe you are looking for