Ibase Component

Hi All,
Any help on ibase component creation will really be appreciated.Please if possible can someone send me some code for Creating Ibase component.
Mail id: [email protected]
**********points will be rewarded***********

Hi Anu,
To create an Ibase, use function module CRM_IBASE_CREATE
only provide the following parameters.
I_IBASE_TYPE     : This is the Ibase type
I_ADDRESS_DATA    :Address Details
I_ADDRESS_ADMIN   : handler
I_PARTNER         :partner details
I_STRUC_IBASE_TAB :Ibase structure
I_DATE       : date    
I_TIME            : time
For creating an Ibase component use CRM_IBASE_COMP_CREATE.
This should help.
Regards,
Shalini Chauhan

Similar Messages

  • Ibase/Component issue while creating a message from satillite system

    Hi experts,
    we have implemented the service desk functionality in solution manager system.
    User is able to create message in solution manager directly.
    While creating message from a satellite system IBASE/component fields are filled with incorrect values.
    Because of this user unable to create message from satillite system.
    Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
    Thank you in advance,
    Babu

    Hi  Babu,
    For Creating messages in SOLMAN make sure that in T code SM30  under the table BCOS_CUST data is maitained
    OSS_MSG     W     NONE     CUST620     1.0
    First your should make your solman ready for posting issues within.
    Then connect it to ECC systems and try posting issues there.
    Do not user Tcode NOTIF_CREATE for posting issues  always use HELP- Create Support message.
    Thanks
    Nand

  • Copy  Ibase Component from Service Contract to Service Plan

    HI Experts,
    I  am creating a Service Contract by maintaining the Ibase Component in the Product list at item level
    and I am doing followup transaction service plan and from service plan to service order followup
    But  the Ibase Component is not getting Copied from service Contract to service plan transaction  as well
    as from serivce plan to service order transaction.
    Pls help me in this regard.
    Regards
    Pavan.A

    Hi Pavan,
    You can use copy control BADI to achieve this.
    The badi to use is 'CRM_COPY_BADI'.  You need to configure the transaction copy control to trigger this badi.
    Look at methods REFOBJ,  SERVICE_I and SERVICEPLAN_I.
    One of this methids should allow you to do this.
    Regards,
    Surendar

  • Issue in setting IBASE component of service confirmation item

    Hello Experts,
                   I am facing a problem while creating a service confirmation item with reference to Service order items.  I am using CRM_ORDER_MAINTAIN
    bapi.  Issue is in the Ibase component of the service confirmation items as it is always taking the Ibase component of Confirmation Header even though
    i am explicitly passing the Ibase component of service conf item of  with IT_SERVICE_OS parameter. I am making sure that i fill up MARKED_OBJECT correctly.
    in CRMD_ORDER  i can see the Ibase component of  header and item both but Header one is the marked as main reference object.
    Any idea why Component can not be set explicitly for for service confirmation item.

    To achieve the above, try the below fix:
    var buttonBar:ButtonBar = new ButtonBar();
    buttonBar.requireSelection = true;
    Hopefully this works for you . Cheers!!

  • IBASE & Component in Change Request & Ugent correction

    Hi,
    I have configured CHARM for following landscape details.
    Dev-100
    QAS-200
    Prod-300
    For this I have defined the logical component as 100->200->300 & This is working fine. I mention the IBase & Component for Target system i.e. 300 client & Proceed for ChaRM Cycle.
    But  I am having one more client in Production i.e 310. So Can I maintain one more logical component say 100->200->310 & mention the target client for Ibase & Component for 310 target client . Will it work.
    Regards
    PK

    Hi PK,
    This is std behavior of SDHF : 'The task list of a mainten. cycle contains all the systems that you defined in the maintenance project.
    The task list of an urg. correction contains the production system in which the problem occurred, and only the systems on the shortest transport route from the development system to the production system. This implements your urg. correction as quickly as possible.'
    Answer to your question is here:
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
    under 'Urg. Corrections' node you ll see those lines:
    "You can use the program CRM_SOCM_SERVICE_REPORT to import urg. corrections simultaneously into production systems.
    You can also import completed urg. corrections into parallel production systems with the program /TMWFLOW/SCMA_BTCH_SYNC_UC, or into parallel testsystems 
    with the program /TMWFLOW/SCMA_BTCH_SYNC_TEST. You can schedule this program so that it runs in the background periodically during the day, with the job wizard (transaction SM36).
    You can also use the background tasks /TMWFLOW/SCMA_TRIMP_UC and /TMWFLOW/SCMA_TRIMP_TEST, which are in the maintenance cycle task list.'
    More usefull info are under node : 'Scheduling the automatic import of Urg. Corrections'
    Hope this helps !
    Regards

  • Significance of IBase, Component and Product ID while creating Change Reque

    Hello,
    When we create a change request via SOLMAN_WORK_CENTER, we are supposed to provide values for
    1) IBase
    2) Component
    3) Product ID
    Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
    The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
    Can the value for IBase obtained via SMSY t code also?
    What does component and Product ID signify?
    Where can we get values for Component and Product ID?
    Is Product ID the same as value we get from menu Option System->Status->Installation Number
    Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
    If Not, how will SolMan identify which system the change should point to?
    Or only value for Ibase is enough?
    Thanks,
    Vikas

    Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
    The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
    Can the value for IBase obtained via SMSY t code also?
    No
    What does component and Product ID signify?
    Product ID is not mandatory. I actually hide it in the CRMD_ORDER screen.
    Where can we get values for Component and Product ID?
    Is Product ID the same as value we get from menu Option System->Status->Installation Number
    Component  - IB52 as you already mentioned
    Product ID - in a customizing table, I've seen it once but can't remember where honestly. As stated, I don't bother with the field
    Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
    The iBase and component are mandatory, odd thing is if you enter the component without entering 1 in the iBase, SolMan will fill the 1 in for you.
    If Not, how will SolMan identify which system the change should point to?
    By the logical components assigned to your maintenance project. You can actually have transports for more than one production assigned to your change document. For instance you could have a BI and ECC transport assigned to the sane change document. Your tak list will have the dev, testing and production systems for each logical component assigned.
    Or only value for Ibase is enough?
    I was having this discussion with someone the other day. Since the logical components assigned to the mianteance project really determines what systems you can create transports for, what is the value of the component field? Best I could determine was when you use the Logon on to System action, it points to the one listed in the component field only. other than that, I'm not sure.

  • Ibase Component to find associated Product id

    Hello SAP Gurus,
    For a given Ibase Component i need to find the Object id(Product id) as seen on IB53 transaction, i know that i can use the FM CRM_IBASE_COMP_GET_DETAIL for the same but i need to know the direct table relationship for the same.
    Help will be really appreciated
    Thanks in advace

    Hi Bhavpreet,
    I understand that you want to get the Product ID from a given Instance number of an IBase Component. The Master table of the IBase Components is IBIN. Using the given Component Instance number as Input to table IBIN we get the field OBJNR from this table. Now OBJNR is a CHAR22 Guid. We need to convert this to RAW16 format. GUID_CONVERT is what we used earlier, however now its obsolete so I would suggest that you use the CLASS cl_ibase_service and static method cl_convert_guid_22_16 to get a RAW16 GUID.
    You can then use this RAW16 GUID to pass to table field COMM_PRODUCT-PRODUCT_GUID and get the field PRODUCT_ID which is what you need. I have a written a small piece of code to help you understand this.Please let me know in case you need more details on this.
    Thanks
    Sumit
    REPORT zrandom_test.
    PARAMETERS : p_inst TYPE ibin-instance.
    DATA: gv_objnr22 TYPE ibin-objnr,
    gv_guid16 TYPE comt_product_guid,
    gv_objid TYPE comt_product_id.
    START-OF-SELECTION.
    CLEAR gv_objnr22.
    SELECT SINGLE objnr FROM ibin INTO gv_objnr22 WHERE instance = p_inst.
    CLEAR gv_guid16.
    gv_guid16 = cl_ibase_service=>cl_convert_guid_22_16( gv_objnr22 ).
    CLEAR gv_objid.
    SELECT SINGLE product_id FROM comm_product INTO gv_objid WHERE product_guid = gv_guid16.
    WRITE : gv_objid.

  • ChaRM Copy Control for Ibase component

    Hi Team,
    I have created ZDCR which is copy of SDCR. And i have created ZDHF which is copy of SDHF. I have created the ZDHF as a subsequent document from ZDCR. While ZDHF is created, the Ibase component is not getting copied from ZDCR.
    How to copy the ibase component from ZDCR to ZDHF?
    Thank you for the input.
    Regards
    Kumar

    Hi
    you need to maintain the settings
    goto spro change request management->extended configuration->copy control
    define mapping rules
    here choose your entries and check the IBASE column.
    this shd solv u prb
    Regards
    Prakhar

  • Table for IBase Component

    Hi,
    Can anyone tell me the table where the IBase Component is Stored?Howz it related to the Support Desk Message through Tables?
    Thanks in advance,
    Sivagami.R

    Hey Sivagami,
    Here is the relation between Support Msg and Ibase component....
    Every Support Msg has something called as GUID which uniquely identfies a Suppport Msg...
    We can get this GUID from Table crmd_orderadm_h....Just pass the request id.....
    Now pass this guid to FM CRM_REFOBJ_READ_OW to get  ibase and ibase component....
    Reward for usefull answer,,,,
    Regards,
    Anand...

  • Deleting IBASE component

    Hi experts,
    how can i delete an ibase component from an abap program in the SAP release 5?
    Thanks in advance
    Francesca

    crm rel 5?
    must archive ibase.
    regards
    clemens

  • Creating an IBase Component WITH Connection Object (ISU_CONNOBJ)

    Hello
    I want to create an IBase Component with relation to a Connection Object. I am able to create the first one (IBase Component) but I do not know how to create a Connection Object for the newly created IBase Component.
    I am doing everything using the BOL framework and was unable to find a proper relation from IBase Component or Product to Connection Object.
    Can you help me out?
    regards
    Mateusz

    Solved!
    Apparently after creating new IBase Component and new Product (assigned to the newly created IBase Component) it is required to execute transaction save and commit for the object of newly created Product. After that system sees newly created objects.
    Required code (after creation of a new Product):
    DATA:
      lo_core TYPE REF TO cl_crm_bol_core,
      lo_new_product TYPE REF TO cl_crm_bol_entity,
      lo_factory TYPE REF TO cl_crm_bol_entity_factory,
      lo_transaction TYPE REF TO if_bol_transaction_context.
      lo_core = cl_crm_bol_core=>get_instance( ).
      lo_factory = lo_core->get_entity_factory( 'Product' ).
      lo_new_product = lo_factory->create( )
      lo_transaction = lo_core->get_transaction( iv_entity = lo_new_product ).
      lo_transaction->save( iv_force_save = abap_true ).
      lo_transaction->commit( ).

  • Current IBase Component is not in an active IBase

    Hello Everybody,
    I have a big problem.
    I am using a BAPI for create a Change Request on Solution Manager, this is the bapi BAPI_BUSPROCESSND_CREATEMULTI
    The parameters for IBase is 1 and the IBase Component is 3400.
    The Change Request is created, but the fields IBase and IBase Component are empty and the message return is "Current IBase Component is not in an active IBase".
    I do not know the cause of this.
    Please help us whit this.
    Regards
    Juan

    Hello QT,
    Have look to note 1030498.
    Also from dswp->Solution  run Edit-->Initial Data transfer to iBase
    Hope this helps,
    Dolores

  • Service Desk - Change IBase component

    Hi,
    I updated my Solution Manager to the latest available SPs a couple of days ago. After this I found one small problem.
    In the service desk, on going to the change option I am unable to change the IBase component. I was able to do this earlier, when I was on SP11
    Any idea whether there would be any config which would control this?
    Please help.
    regards,
    Kevin Hill

    Dear Friend,
    Have you check your authorization assigned to user.
    are you authorize to change IBase etc. check and revert.
    Most probably it will this error.
    Secondly if it is transaction variant .......check IBASE field.....
    IF IBASE Field is checked for display only in that case you need to uncheck it open for input.
    PLEASE REWARD POINTS.

  • How to control change request creation for particular IBase Component?

    Dear Experts,
    Can anybody suggest , how to control change request creation for particular IBase Component?
    We have implemented ChaRM which is integrated with SAP ECC & SAP BI.
    ChaRM is not integrated with SAP Solution Manager.
    End Users are creating support notifications from -Help Menu- Create Support Notification.
    The IBase Component is not editable once notification is created. This Ibase is copied to change request when the action-create change document is saved.
    Requirement is that, during creation of change document, system should check the IBase component of support notification. If the IBase is related to solution manager system, system should restirct the change request creation.
    Kindly suggest how to achieve this.
    Regards
    Vivek

    Hello Vivek,
    The way to do what you want is to create a schedule condition for action Create Change Document. The action has to be displayed only when the IBase/Component value differs from SolMan. To add the IBase/Component value to the container so that it can be evaluated during runtime, you will have to create a subtype of BUS2000116 on which condition can be buit.
    See the following posts for more information :
    Hope this helps,
    BR.
    Stéphane.

  • ChaRM: Customizing of Change Request (IBase/Component)

    Hi!
    By creation of Change Request the value "IBase / Component" should be filled.
    The default values here are: "0" and "0".
    Has some one already customizng experience here?
    I would like to change the value to e.g. "1" and "314" (my productive IBase).
    Thank you very much!
    regards
    H. Thomasson

    Hi Holger,
    I am not sure about CHARM.
    But since CHARM is also based on Service Desk functionality, may be the transaction IB52 can help you.
    Executing IB52 transaction, will take u to a screen from where u can select your Installed Base using value help. In most of the cases, there will be only one option.
    Just select that iBase, in the following screen, you will be able to see all the attributes of your installed base in the Text tab of the lower right part of the screen which is editable. Here you can make the required changes as you wish.
    Reward for helpful answers.
    best regds,
    Alagammai.
    Edited by: Alagammai Arunachalam on Sep 25, 2008 12:28 PM

  • Ibase Component and Partner Update - Data Corruption

    Hello Everyone,
    I'm facing a pecular issue with updating parters of an Ibase component through a custom program.
    This is the requirement:
    Under certain conditions, Partner A attached to the components of an Ibase have to be replaced by Partner B for the same partner function.
    If the ibase have more than 1 component and if both have the same partner, then a data corruption results. Teh data corruption is a double entry in table IBPART where i end up getting 2 valid entries for a PARTNERSET record.
    I'm using FM CRM_ICSS_CHANGE_COMPONENT to carry out the partner update.
    Here are the steps i'm using:
    1. I'm Looping at the Ibase
    2. I fill in the Component structure I_COMP with the Ibase and the Instance 1.
    3. I fill the partner structure I_PARTNER with the two partner records- Partner A (For Deletion by setting field UPDIND as 'D') and Partner B (For addition by setting Field UPDIND as 'I').
    4. Then the loop continues for updating the second Component.with the same details.
    After the Update, the following is happening at the table level.
    1. Table IBPART gets 2 records which are valid for each Instance. (Ideally, there should be only 1 record for each component which then links to multiple partner functions in tale CRMD_PARTNER). the two records are just slightly different in theoir VALID FROM timestamp. But both records are valid in Current Time.
    This is resulting in a short dump when i try to go to the partner section from IB52 transaction.
    I think the main reason for this is that table IBPART is not locaking down when the first update is happening (deletion) and hence i end up with two records
    Can any one help me out in this
    Regards
    Dharmendra

    Hi,
    we couldnt completely solve the issue. I could find no way to lock up the partner update to a component. But this is what we managed to do and so far we havent received any more data corruption error. We made a copy of the FM CRM_ICSS_CHANGE_COMPONENT and made it as an UPDATE FM instead of a Normal FM. This somehow mitigated the issue and till now we havent seen the problem re-surface. I'm not sure if this work for you.
    Thanks n Regards
    Dharmendra

Maybe you are looking for