Issue in setting IBASE component of service confirmation item

Hello Experts,
I am facing a problem while creating a service confirmation item with reference to Service order items. I am using CRM_ORDER_MAINTAIN
bapi. Issue is in the Ibase component of the service confirmation items as it is always taking the Ibase component of Confirmation Header even though
i am explicitly passing the Ibase component of service conf item of with IT_SERVICE_OS parameter. I am making sure that i fill up MARKED_OBJECT correctly.
in CRMD_ORDER i can see the Ibase component of header and item both but Header one is the marked as main reference object.
Any idea why Component can not be set explicitly for for service confirmation item.

To achieve the above, try the below fix:
var buttonBar:ButtonBar = new ButtonBar();
buttonBar.requireSelection = true;
Hopefully this works for you . Cheers!!

Similar Messages

Copy Ibase Component from Service Contract to Service Plan

HI Experts,
I am creating a Service Contract by maintaining the Ibase Component in the Product list at item level
and I am doing followup transaction service plan and from service plan to service order followup
But the Ibase Component is not getting Copied from service Contract to service plan transaction as well
as from serivce plan to service order transaction.
Pls help me in this regard.
Regards
Pavan.A

Hi Pavan,
You can use copy control BADI to achieve this.
The badi to use is 'CRM_COPY_BADI'. You need to configure the transaction copy control to trigger this badi.
Look at methods REFOBJ, SERVICE_I and SERVICEPLAN_I.
One of this methids should allow you to do this.
Regards,
Surendar

IBase / Component for service desk messages

Hi experts,
we implement the service desk and facing the following problem:
if a message is created from a satellite system we would like the fields IBASE/component within the message to be filled during the creation of the message with the right ibase/component as it is defined in trans. IB52 . Instead of that we have zeros in both fields.
Has someone any ideas how to solve this?
Thank you in advance,
Roula

Hi,
You need to generate the ibase components.
Go to tcode : DSWP open your solution --> Edit --> Initial data transfer for ibase
This will generate the ibase components for the systems in that particular solution.
If the old ibase is existing then it will overwrite, duplicate ibases wont be created.
regards
Naveen

Material confirmation in ECC based on service confirmation in CRM

The scenario is Service order & confirmation is in SAP CRM & the billing is in ECC
The Issue is about material ( spare parts) issue in ECC based on the service confirmation in CRM. In ECC the spare parts are batch managed.
So to do an automatic goods issue in ECC, we need to enable a BAPI for batch determination.
Now we are contemplating of doing the goods issue in ECC manually.
Request you to see if the below scenario works or a better solution is possible
Can we assign a normal sales order type instead of a debit memo so that delivery of spare parts & then billing can take place.
The menu path I am talking about is ( ECC- SPRO- Integration with other mySAP components-CRM-Settings for service processing-billing integration-map transaction types & item categories)

Hi Madhu G
I have defined the confirmation profile in Opk0. I know that I can assign a different profile with reference to user.
I dont want confirmation profile based on Storage location
I want the confirmation screen to be different for different materials -plant combination. Does anyone have any idea how this can be achieved?
regards
PK

Query on Reservation on Service Confirmation

Hello All,
We have a scenario where once the confirmation is created in SAP CRM system it should trigger a reservation in the SAP ECC system, we have made the required customization settings under logistics integration, we copied the standard service order SRVO to YTSV doc type and the item category SRVM to YRVM (screen shot attached below) and against it we have indicated it as reservation
However the help document of sap mentions that the reservation can only happen with the following doc type REPA and item category RMAT, please advice if the above configuration is correct or the same needs to be changed
Kind Regards
Atul

Closing, this thread
The service confirmation item category determines the reservation, however all the configurations should be in line as RMAT item category.
Kind Regards
Atul

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

Issue in setting custom identity service for soa 11.1.1.4

Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
Bala

Hi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks

Service Desk - Change IBase component

Hi,
I updated my Solution Manager to the latest available SPs a couple of days ago. After this I found one small problem.
In the service desk, on going to the change option I am unable to change the IBase component. I was able to do this earlier, when I was on SP11
Any idea whether there would be any config which would control this?
Please help.
regards,
Kevin Hill

Dear Friend,
Have you check your authorization assigned to user.
are you authorize to change IBase etc. check and revert.
Most probably it will this error.
Secondly if it is transaction variant .......check IBASE field.....
IF IBASE Field is checked for display only in that case you need to uncheck it open for input.
PLEASE REWARD POINTS.

Setting approval of Status of Goods/Service Confirmation - Stat_RELEASE

Could someone please tell me where in SRM Stat_Release is set for approval of Status of Goods/Service Confirmation.
Does it have a default value to begin with?
What triggers the value to change?
When & where does the value change?

Hi
This seems to be a bug in the system.
<u>0BBP_RELCON (Release status of the GR/service confirmation)</u>
Query 0BBP_CONF_Q009
Title Confirmation of Goods/Service per Order
Based on InfoCube: 0BBP_CONF
Use:
This report shows which goods and service completion confirmations were updated for each order within a certain period.
<u>Please go through the follwoing SAP OSS Notes -></u>
Note 214220 - Additional documentation: SAP B2B Procurement 2.0B
Note 816764 - Incorrect extraction of Approval SC with 'DELETE' Status
Note 807718 - BBP 30 - SRM 4.0: BW extractor and quotation status
Note 813919 Performance of 0BBP_TD_SC_APPR_1 DataSource
Note 978637 - Duplicated Entries in Shopping Cart Approval DSO
Note 912542 - Total Approved Value of Shopping Cart is multiplied in BW
Note 915528 - Wrong 'Total Approved Value' in Shopping Cart
Note 947495 - Composite SAP note for BI Content 3.5.3 Add-On Patch 11
Regards
- Atul

Copy Control Issue- Service Order to Service Confirmation for Sales Items

Hello All,
I have a scenario where in my service order, I am entering both items Sales Relevant Items and Service Relevant Items(screen shot of the service order attached)
The Service Order gets saved, now when I am creating the service confirmation as a follow up document to the Service Order, I am getting the below error for the sales relevant item
Since I have not maintained copy control settings for my sales relevant item in my service confirmation I am getting the above error when copying, the reason for me not maintaining the copy control settings is that the sales relevant item is not required for the service confirmation, what steps do I need to perform so that my sales relevant item does not get carried to the service confirmation transaction type
Please Advice.
Kind Regards
Atul

Hi Gobi,
I do not want the sales item to be copied to my service confirmation, then could you please advice what functional configurations I need to make
I have removed the copy item category settings, I have also removed the Define Item category determination when copying
Kind Regards
Atul

Group delivery for BOM's when one of the BOM component has no confirmed qua

Hi,
We have an issue. We have group delivery for BOMs. However it might be in some cases that one of the component has no confirmed quantity. Still we do not want delivery for any of the component to be created. What is the easiest way to achive this?
thanks in advance.
regards Camilla

Hi Camilla,
In VOV7 for the item category of main item Create Delivery Group must be assigned a value X (Form delivery group with one delivery date). If you have this configuration set-up done system will assign one delivery group for the entire group of BOM materials and all will be delivered on the same date. Can you check this?

How to cancel and redo a service confirmation?

Here is the scenario (Service management):
A Service confirmation has been created with status "Completed".
As a result the status of the originating service order is set to "Confirmed" (standard behavior).
Say the confirmation data was wrong and postings in R/3 needs reversing (for example for a spare parts goods issue).
Standard SAP allows you to Cancel the items in the Service confirmation which will automatically reverse all the postings in R/3. So far so good!
The problem is that I can't see how to recreate a new service confirmation. The status "Confirmed" on the Service order prevents you from creating any new follow up service confirmation.
Does anybody know the answer to this puzzle?
Thanks in advance for help !

Hi
to redo the service confimation, you need to change the status of the service order to "released'.
Permanent solution:
The way service oder status changes automatically when service item is confirmed,trigger a action when a service cofirmation is cancelled so that the status of that service item changes back to released.

Ibase Component and Partner Update - Data Corruption

Hello Everyone,
I'm facing a pecular issue with updating parters of an Ibase component through a custom program.
This is the requirement:
Under certain conditions, Partner A attached to the components of an Ibase have to be replaced by Partner B for the same partner function.
If the ibase have more than 1 component and if both have the same partner, then a data corruption results. Teh data corruption is a double entry in table IBPART where i end up getting 2 valid entries for a PARTNERSET record.
I'm using FM CRM_ICSS_CHANGE_COMPONENT to carry out the partner update.
Here are the steps i'm using:
1. I'm Looping at the Ibase
2. I fill in the Component structure I_COMP with the Ibase and the Instance 1.
3. I fill the partner structure I_PARTNER with the two partner records- Partner A (For Deletion by setting field UPDIND as 'D') and Partner B (For addition by setting Field UPDIND as 'I').
4. Then the loop continues for updating the second Component.with the same details.
After the Update, the following is happening at the table level.
1. Table IBPART gets 2 records which are valid for each Instance. (Ideally, there should be only 1 record for each component which then links to multiple partner functions in tale CRMD_PARTNER). the two records are just slightly different in theoir VALID FROM timestamp. But both records are valid in Current Time.
This is resulting in a short dump when i try to go to the partner section from IB52 transaction.
I think the main reason for this is that table IBPART is not locaking down when the first update is happening (deletion) and hence i end up with two records
Can any one help me out in this
Regards
Dharmendra

Hi,
we couldnt completely solve the issue. I could find no way to lock up the partner update to a component. But this is what we managed to do and so far we havent received any more data corruption error. We made a copy of the FM CRM_ICSS_CHANGE_COMPONENT and made it as an UPDATE FM instead of a Normal FM. This somehow mitigated the issue and till now we havent seen the problem re-surface. I'm not sure if this work for you.
Thanks n Regards
Dharmendra

CHARM: Automatic assignement for IBase/Component in Change Request

Hi!
By creation of Change Request the value "IBase / Component" should be filled.
The default values here are: "0" and "0".
Has some one already customizng experience here?
I would like to change the value to e.g. "1" and "314" (my productive IBase).
Thank you very much!
regards
H. Thomasson

Hi Roel,
many thanks for your response. You talking about service desk issue.
Unfortunately we do not use service desk and create the change requests manually.
As I mentioned of great interest were the issue with customizing of layout and actions within Change requests and documents.
Here some examples:
automatic assignement of change manager to the change request
automatic assignement of Ibase to the change requests
Do you know the customizing procedure here (tcode, documentation) and can help?
Thank you in advance
H. Thomasson

How to view Knowledge Article Assignment Block in Service Confirmation

Hi dudes,
CRM 7.0 introduces Knowledge Articles, which can be used in Service Orders, Repairs, etc, they have an assignment block for this purpose. Unfortunately, it is not available for Service Confirmations.
I'm not sure if it is possible to reuse the asignment block in this case. I found an interesting WIKI entry which tells how to display a z table in an assignment block. There is also information about how to assing a view to a component on building blocks config guide C04.
So I decided to follow those indications, and try to reuse it. It looked (apparently) easy (at least with my poor knowledge, since I'm new on this).
From the service order (BT116H_SRVO), I wrote down the technical data of the KA assignment block:
COMPONENT: GSDOCFLOW
VIEW: HdrDocFlowEF
I want to add it to the service confirmation (BT117H_SRVC). So I went to the Runtime Repository Editor:
- Added View in ViewSet BT117H_SRVC/OVViewSet with component: GSDOCFLOW and View: HdrDocFlowEF.
- Saved.
I went back to the Component Structure Browser, View BT117H_SRVC/OVViewSet, Configuration tab, but the new assignment block is not available!!!
The C04 guide creates a component usage before adding the view, which I don´t know if it is needed in this case. Checking BT116H_SRVO, there is a component usage for KA!!! but I tried to replicate it and I got to the same point.
Maybe it is not as simple as I thought. I would really appreciate any advice on this issue
At least, please let me know if it is feasible.
thanks a lot!
Pablo
Edited by: Pablo Rodríguez Mateos on Sep 8, 2009 9:12 AM
Edited by: Pablo Rodríguez Mateos on Sep 8, 2009 11:24 AM

Thank you Enrique. I'll keep investigating. As soon as I reach a conclusion I'll let you know. I give you 2 points for the effort.
Regards.
Pablo

Issue in setting IBASE component of service confirmation item

Similar Messages

Maybe you are looking for