Deleting IBASE component

Hi experts,
how can i delete an ibase component from an abap program in the SAP release 5?
Thanks in advance
Francesca

crm rel 5?
must archive ibase.
regards
clemens

Similar Messages

Ibase component delete

Hi,
Is there anyway to delete of "ibase component" ? I used "CRM_IBASE_COMP_DELETE", but didn't delete component.
Any review ?
Thanks,

Dear Swapna,
Thank you very much, it works.
Best Regards,

Ibase Component and Partner Update - Data Corruption

Hello Everyone,
I'm facing a pecular issue with updating parters of an Ibase component through a custom program.
This is the requirement:
Under certain conditions, Partner A attached to the components of an Ibase have to be replaced by Partner B for the same partner function.
If the ibase have more than 1 component and if both have the same partner, then a data corruption results. Teh data corruption is a double entry in table IBPART where i end up getting 2 valid entries for a PARTNERSET record.
I'm using FM CRM_ICSS_CHANGE_COMPONENT to carry out the partner update.
Here are the steps i'm using:
1. I'm Looping at the Ibase
2. I fill in the Component structure I_COMP with the Ibase and the Instance 1.
3. I fill the partner structure I_PARTNER with the two partner records- Partner A (For Deletion by setting field UPDIND as 'D') and Partner B (For addition by setting Field UPDIND as 'I').
4. Then the loop continues for updating the second Component.with the same details.
After the Update, the following is happening at the table level.
1. Table IBPART gets 2 records which are valid for each Instance. (Ideally, there should be only 1 record for each component which then links to multiple partner functions in tale CRMD_PARTNER). the two records are just slightly different in theoir VALID FROM timestamp. But both records are valid in Current Time.
This is resulting in a short dump when i try to go to the partner section from IB52 transaction.
I think the main reason for this is that table IBPART is not locaking down when the first update is happening (deletion) and hence i end up with two records
Can any one help me out in this
Regards
Dharmendra

Hi,
we couldnt completely solve the issue. I could find no way to lock up the partner update to a component. But this is what we managed to do and so far we havent received any more data corruption error. We made a copy of the FM CRM_ICSS_CHANGE_COMPONENT and made it as an UPDATE FM instead of a Normal FM. This somehow mitigated the issue and till now we havent seen the problem re-surface. I'm not sure if this work for you.
Thanks n Regards
Dharmendra

Ibase component not picking up

Hi,
Ibase / component was picking up properly from ECC Development till last week.
After the upgradation of ECC development system to sps17 ibase/component is not picking up?
What could be the possible reason for this behaviour.
Raj

Hi
Check in IB52 press F4 there should only one "1" or sol_man_data_rep entry not 2
if so delete the extra entry
then enter "1" and press enter
check your ibase for the ECC or relevant system
Hope above solves problem
Regards
Prakhar

IBASE component not required in CIC

Hello,
In cic0, in bp search my client does not want the Ibase component as Ibases are not used. How can i disable it.
please help urgent matter.
Pramod.

Pramod,
Here is how to go about terminating the IBASE out of your BP search.
Use T. code :smw0
Select the radio - HTML templates for WebRFC applications and
execute.
Click on execute again in the screen that appears.
Create a new object by copying CRM_CIC_SEARCH_DISPLAY
Again run the transaction SMW0
put object ZCRM_CIC_SEARCH_DISPLAY_NEW in object name
Now go to change mode
In the HTML code file delete or comment the following code.
<TABLE border=1 cellPadding=0 cellSpacing=0 frame=void
rules=none width=100%>
        <TR><TH align=left style="font:bold" width=28%> </TH></TR>
        <TR><TH align=left width=28%><NOBR></NOBR> </TH>
          <TD width=72%><NOBR>
             <INPUT maxLength=19 name=INSTANCE size=25
maxLength=18 type=TEXT/PLAIN>
             <INPUT maxLength=40 name=DEVICEID size=25
maxLength=40 type=TEXT/PLAIN>
             <INPUT onclick=LISTRELIB() src="S_B_ZOIN.GIF"
type=image title="<%%DISPLAY_HITLIST3%>">
             <INPUT onclick=DET_IBASE() src="s_b_detl.gif"
type=image title="<%%DISPLAY_DETAILS3%>">
          </NOBR></TD></TR>
        <TR><TH align=left width=28%><NOBR><!%%SHORT_TEXT%
></NOBR> </TH>
          <TD width=72%><INPUT readOnly name=DESCR size=40
maxLength=40 type=TEXT/PLAIN>
          </TD></TR>
        <TR><TH align=left width=28%><NOBR><!%%PRODUCT_ID%
></NOBR> </TH>
          <TD width=72%><NOBR>
            <INPUT maxLength=40 name=PRODUCT_ID size=25
type=TEXT/PLAIN>
            <INPUT maxLength=40 name=OBJECT_ID size=25
type=TEXT/PLAIN>
            <INPUT name=OBJECT_FAMILY size=4 maxLength=4
type=TEXT/PLAIN></NOBR>
          </TD></TR>
        </TABLE>
Then save the HTML file.
in the pop up dialog select the yes option.
Now go to Customer Relationship Management Interaction Center
WinClient Component Configuration Visible ComponentsToolbars
(GUI Status, Active Functions) Define Profiles for Search
Strategies
double click on NORM and in the HTML for BP search maintain
ZCRM_CIC_SEARCH_DISPLAY_NEW
Save.
VOILA...Now in the CIC screen you can not see IBASE
<b> <i> IceCube </i> </b>

Error while Deleting Software Component

Hi All,
I am getting following error while deleting Software Component Version:
Unable to Delete object DELETEDEMO_COMPONENET, 1.0 of delete.
You cannot delete a sotware component version if it contains imported interfaces.
Is there any shortcut isntead of deleting all objets manuually?
Sri

Hi Sri.
It's very simple
Solution:
Double Click on Software Component, On Right Hand side >Go to Software Component Version->Delete the software component.If all the necessary Objects have been properly deleted, there will be no problem in Deleting the Software Componet version
1) Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings.
2) There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
3) Delete all namespaces in the editor using sign. Do not save the changes.
4) Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up.
5) The radio button for u201CInterface import should be at u201CNot permittedu201D instead of u201CImport RFC and IDoc Interfaces from SAP Systems Permittedu201D.
6) Now go to Software component version menu in the right hand pane. Click on delete and the software component vanishes from left hand pane
>> Is there any shortcut isntead of deleting all objets manuually?
NO.. other way or any any shortcut for this
Abid

Unspecified Error while deleting a component

Hi
I have a component with a <form> tag; which refers to a servlet which is registered with a particular path.
When i try to delete the component I am getting "Unspecified Error" - error. Once i run the page am not able to select the component to delete also.
Any help will be appreciable
Thanks
Veena

Hi Veena,
Look at your log file to get complete stack trace to find the cause.
As a workaround, In crxde go to the page under par identify your component. Then delete that node & save the changes. An example to delete productlist from geometrixx product page is [1].
[1] /content/geometrixx/en/products/jcr:content/par/productlist
Thanks,
Sham

Error while deleting enhanced component

Hi,
i have enhanced the component 'ICCMP_BP_CP' and the view 'ICCMP_BP_CP/BuPaContactPersonCreat'. When we enhanced the component, it throwed me the error message that user is not authorized for sicf transaction. after getting the authorization, i enhanced the component. But when we we enhanced the view, it was throwing view bind exception in Web UI. so, we deleted the enhanced view and when we are trying to delete the enhanced component 'ICCMP_BP_CP', its throwing the error that 'run time repositry could not be loaded',
After I tried deleting the component enhancement, I can still open that component with enhancement set from BSP_WD_CMPWB but it doesn't show me any repository.xml. Also, I don't see any entry for the enhanced component in BSPWD_CMP_C_REPL.
I am attaching the screen shots like how I am deleting the enhanced component. Could you please tell me how to delete it.
Thanks & Regards,
Kamesh Bathla

Hello,
Open table BSPWDV_COMP_EXT via SM30 and open it with the Enhancement Set in which you created the enhancement you want to delete. (or the view cluster BSPWDVC_CMP_EXT via SM34)
Look for the component for which you want the enhancement to be deleted. Note down the "Runtime Rep. BSP application" and delete the record.
Open the BSP application you noted down in SE80 and delete the (incorrect) enhancements, then delete the whole BSP application.
Restart enhancing the component.
Hope this helps,
Joost

Error while deleting any component from the widget

Whenever i delete any component from widget it stops running..i means whenever after deleting i execte the widget nothing happens.........it gives me an error saying
"Syntax Error in line 1 " and no other information....so can anyone tell me how to resolve this????????

Hello,
This might happen when you delete Header or Footer from widget. It is already corrected in latest version of Tools. Workaround is to add dummy view that is not used anywhere in widget but contains Header and Footer.
Eriks

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

System Error While Deleting Software Component from Repository

Hi,
I have deleted datatypes,Interface types,Message types,Interface Mapping & Message Mapping also.
When im deleting Software Component from Repository,
I m getting the following System Error.
[-9402]:System Error:AK Unexpected Strategy information.
and im not able to delete.
Plz Suggest me.
Sree Ram.

hi stree ram...
u can get tth note directly form SAP service or go to transaction 'snote'....
and ther u can import it from the menu bar thers a option of download/upload....just put in the note no.
regards...
vishal
P.S : assign pts if answer found helpful

Copy Ibase Component from Service Contract to Service Plan

HI Experts,
I am creating a Service Contract by maintaining the Ibase Component in the Product list at item level
and I am doing followup transaction service plan and from service plan to service order followup
But the Ibase Component is not getting Copied from service Contract to service plan transaction as well
as from serivce plan to service order transaction.
Pls help me in this regard.
Regards
Pavan.A

Hi Pavan,
You can use copy control BADI to achieve this.
The badi to use is 'CRM_COPY_BADI'. You need to configure the transaction copy control to trigger this badi.
Look at methods REFOBJ, SERVICE_I and SERVICEPLAN_I.
One of this methids should allow you to do this.
Regards,
Surendar

Issue in setting IBASE component of service confirmation item

Hello Experts,
I am facing a problem while creating a service confirmation item with reference to Service order items. I am using CRM_ORDER_MAINTAIN
bapi. Issue is in the Ibase component of the service confirmation items as it is always taking the Ibase component of Confirmation Header even though
i am explicitly passing the Ibase component of service conf item of with IT_SERVICE_OS parameter. I am making sure that i fill up MARKED_OBJECT correctly.
in CRMD_ORDER i can see the Ibase component of header and item both but Header one is the marked as main reference object.
Any idea why Component can not be set explicitly for for service confirmation item.

To achieve the above, try the below fix:
var buttonBar:ButtonBar = new ButtonBar();
buttonBar.requireSelection = true;
Hopefully this works for you . Cheers!!

Deleting a component in an enhancement from SMOD

Hi,
I have deleted a component in an enhancement from SMOD and activated the project in CMOD. Iam getting the expected results in developemnt system .
When I transport the changes to quality , I see that component is deleted , but, the corresponding function is still being called .
Please help on this.
Thanks,
Sushma .K

Dear Sushma,
I got solution for your code
first comment z include in FM EXIT_SAPLRHIV_002
then go to FM RH_GET_NEXT_NUMBER and enhance this
for that in form
CHECK_EXTERNAL_NUMBER where you exit call so put logic for skip this code to check for your particular scenario
if got the solution then please share me.

IBASE & Component in Change Request & Ugent correction

Hi,
I have configured CHARM for following landscape details.
Dev-100
QAS-200
Prod-300
For this I have defined the logical component as 100->200->300 & This is working fine. I mention the IBase & Component for Target system i.e. 300 client & Proceed for ChaRM Cycle.
But I am having one more client in Production i.e 310. So Can I maintain one more logical component say 100->200->310 & mention the target client for Ibase & Component for 310 target client . Will it work.
Regards
PK

Hi PK,
This is std behavior of SDHF : 'The task list of a mainten. cycle contains all the systems that you defined in the maintenance project.
The task list of an urg. correction contains the production system in which the problem occurred, and only the systems on the shortest transport route from the development system to the production system. This implements your urg. correction as quickly as possible.'
Answer to your question is here:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
under 'Urg. Corrections' node you ll see those lines:
"You can use the program CRM_SOCM_SERVICE_REPORT to import urg. corrections simultaneously into production systems.
You can also import completed urg. corrections into parallel production systems with the program /TMWFLOW/SCMA_BTCH_SYNC_UC, or into parallel testsystems
with the program /TMWFLOW/SCMA_BTCH_SYNC_TEST. You can schedule this program so that it runs in the background periodically during the day, with the job wizard (transaction SM36).
You can also use the background tasks /TMWFLOW/SCMA_TRIMP_UC and /TMWFLOW/SCMA_TRIMP_TEST, which are in the maintenance cycle task list.'
More usefull info are under node : 'Scheduling the automatic import of Urg. Corrections'
Hope this helps !
Regards

Deleting IBASE component

Similar Messages

Maybe you are looking for